About | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange

melodic noetic   Show EOL distros: 

Use GitHub to report bugs or submit feature requests. [View active issues]

Overview

This package provides greedy frontier-based exploration. When node is running, robot will greedily explore its environment until no frontiers could be found. Movement commands will be send to move_base.

Unlike similar packages, explore_lite does not create its own costmap, which makes it easier to configure and more efficient (lighter on resources). Node simply subscribes to nav_msgs/OccupancyGrid messages. Commands for robot movement are send to move_base node.

Node can do frontier filtering and can operate even on non-inflated maps. Goal blacklisting allows to deal with places inaccessible for robot.

Architecture

explore_lite uses move_base for navigation. You need to run properly configured move_base node.

explore_lite subscribes to a nav_msgs/OccupancyGrid and map_msgs/OccupancyGridUpdate messages to construct a map where it looks for frontiers. You can either use costmap published by move_base (ie. <move_base>/global_costmap/costmap) or you can use map constructed by mapping algorithm (SLAM).

Depending on your environment you may achieve better results with either SLAM map or costmap published by move_base. Advantage of move_base costmap is the inflation which helps to deal with some very small unexplorable frontiers. When you are using a raw map produced by SLAM you should set the min_frontier_size parameter to some reasonable number to deal with the small frontiers. For details on both setups check the explore.launch and explore_costmap.launch launch files.

Setup

Before starting experimenting with explore_lite you need to have working move_base for navigation. You should be able to navigate with move_base manually through rviz. Please refer to navigation#Tutorials for setting up move_base and the rest of the navigation stack with your robot.

You should be also able to to navigate with move_base though unknown space in the map. If you set the goal to unknown place in the map, planning and navigating should work. With most planners this should work by default, refer to navfn#Parameters if you need to setup this for navfn planner (but should be enabled by default). Navigation through unknown space is required for explore_lite.

If you want to use costmap provided by move_base you need to enable unknown space tracking by setting track_unknown_space: true.

If you have move_base configured correctly, you can start experimenting with explore_lite. Provided explore.launch should work out-of-the box in most cases, but as always you might need to adjust topic names and frame names according to your setup.

ROS API

explore

Provides exploration services offered by this package. Exploration will start immediately after node initialization.

Actions Called

move_base (move_base_msgs/MoveBaseAction)

• move_base actionlib API for posting goals. See move_base#Action API for details. This expects move_base node in the same namespace as explore_lite, you may want to remap this node if this is not true.

Subscribed Topics

costmap (nav_msgs/OccupancyGrid)

• Map which will be used for exploration planning. Can be either costmap from move_base or map created by SLAM (see above). Occupancy grid must have got properly marked unknown space, mapping algorithms usually track unknown space by default. If you want to use costmap provided by move_base you need to enable unknown space tracking by setting track_unknown_space: true.

costmap_updates (map_msgs/OccupancyGridUpdate)

• Incremental updates on costmap. Not necessary if source of map is always publishing full updates, i.e. does not provide this topic.

Published Topics

~frontiers (visualization_msgs/MarkerArray)

• Visualization of frontiers considered by exploring algorithm. Each frontier is visualized by frontier points in blue and with a small sphere, which visualize the cost of the frontiers (costlier frontiers will have smaller spheres).

Parameters

~robot_base_frame (string, default: base_link)

• The name of the base frame of the robot. This is used for determining robot position on map. Mandatory.

~costmap_topic (string, default: costmap)

• Specifies topic of source nav_msgs/OccupancyGrid. Mandatory.

~costmap_updates_topic (string, default: costmap_updates)

• Specifies topic of source map_msgs/OccupancyGridUpdate. Not necessary if source of map is always publishing full updates, i.e. does not provide this topic.

~visualize (bool, default: false)

• Specifies whether or not publish visualized frontiers.

~planner_frequency (double, default: 1.0)

• Rate in Hz at which new frontiers will computed and goal reconsidered.

~progress_timeout (double, default: 30.0)

• Time in seconds. When robot do not make any progress for progress_timeout, current goal will be abandoned.

~potential_scale (double, default: 1e-3)

• Used for weighting frontiers. This multiplicative parameter affects frontier potential component of the frontier weight (distance to frontier).

~orientation_scale (double, default: 0)

• Used for weighting frontiers. This multiplicative parameter affects frontier orientation component of the frontier weight. This parameter does currently nothing and is provided solely for forward compatibility.

~gain_scale (double, default: 1.0)

• Used for weighting frontiers. This multiplicative parameter affects frontier gain component of the frontier weight (frontier size).

~transform_tolerance (double, default: 0.3)

• Transform tolerance to use when transforming robot pose.

~min_frontier_size (double, default: 0.5)

• Minimum size of the frontier to consider the frontier as the exploration goal. In meters.

Required tf Transforms

global_frame → robot_base_frame

• This transformation is usually provided by mapping algorithm. Those frames are usually called map and base_link. For adjusting robot_base_frame name see respective parameter. You don't need to set global_frame. The name for global_frame will be sourced from costmap_topic automatically.

Acknowledgements

This package was developed as part of my bachelor thesis at Charles University in Prague.

@masterthesis{Hörner2016,
  author = {Jiří Hörner},
  title = {Map-merging for multi-robot system},
  address = {Prague},
  year = {2016},
  school = {Charles University in Prague, Faculty of Mathematics and Physics},
  type = {Bachelor's thesis},
  URL = {https://is.cuni.cz/webapps/zzp/detail/174125/},
}

This project was initially based on explore package by Charles DuHadway. Most of the node has been rewritten since then. The current frontier search algorithm is based on frontier_exploration by Paul Bovbel.