melodic noetic

Package: psen_scan_v2

The psen_scan_v2 package is a ROS integration driver for the PSENscan safety laser scanner product. It lets you integrate the laser scanner data into your ROS Environment easily. Using the standard sensor_msgs/LaserScan message format ensures compatibility with other laserscan-post-processing nodes such as gmapping.

Common features:

• compliant and approved in accordance with (EN/IEC 61496-1: Type 3, EN ISO 13849-1: PL d, IEC 61508: SIL 2)
• opening angle: 275°
• operating range: 3.0 or 5.5 m safety zone
• 40 m warning zone, reaction time: 62 ms
• Protection type: IP65
• Dimensions (H x W x D) in mm: 152 x 102 x 112.5

Light versions Additional features:

• Muting
• EDM
• Override

Supported Devices

PSENscan firmware >= 3.1.0 is supported on the following models:

Usage

To start reading data from the safety laser scanner and publishing scans execute roslaunch psen_scan_v2 psen_scan_v2.launch in a command line. This will launch the ROS Node with the default configuration.

If you wish to set parameters from the command line, add them to the end of the command as parameter:=value, separated by spaces.

roslaunch psen_scan_v2 psen_scan_v2.launch sensor_ip:=192.168.0.10

This example configures the safety laser scanner at 192.168.0.10 to send it´s frames to the ROS node at localhost.

In order to create an application with your own launch file, you can include the bringup.launch, where you can easily adjust the configuration parameters. A more detailed explanation can be found in the tutorials.

Parameters

Optional Parameters

Expert Parameters (optional)

Published Topics

/<name>/scan (sensor_msgs/LaserScan)

• If fragmented_scans is set to false (default) the driver will publish complete scan rounds from the PSENscan safety laser scanner as a single message.

• If fragmented_scans is enabled the driver will send the measurement data as soon as they arrive, instead of waiting for the scan round to be completed. This way the scan data is received sooner but is split into several sensor messages.

/<name>/zoneconfiguration (psen_scan_v2/ZoneSetConfiguration)

/<name>/active_zoneset (std_msgs/UInt8)

• This topic contains the id of the currently active zoneset of the PSENscan safety laser scanner.

/<name>/active_zoneset_markers (visualization_msgs/MarkerArray)

• The markers published represent the currently active zoneset as triangle lists. They can be viewed e.g. in rviz.

/<name>/io_states (psen_scan_v2/IOState)

• The state published represents the current input and output state of the scanner IOs. A list of all available IOs can be found here

TF Frames

The location of the TF frames is shown in the image below. These names are defined by the aforementioned launchfile parameter name. Changing them is necessary for instance when running multiple scanners.

Defining the scan range

You can adjust the scan field to your needs by changing angle_start and angle_end. The published sensor_msgs/LaserScan will only contain data within the given angle limits. Both limits are defined within the laser_1frame as shown in the image below.

Timestamp details

The timestamps of the scan data published are computed to be close to reality and processing speed of incoming data was optimized to reduce the time for the scan data to be published. This should suffice for localization and slam algorithms. If you application benefits from getting the scan data any sooner there are two possibilities:

• Use fragmented scans. This will publish the individual frames received by the PSENscan safety laser scanner immediately instead of waiting for a scan round to be completed and combined to a single laser scan message.
• Use the tcp_nodelay flag in your ROS subscriber. This will disable the nagle's algorithm, which is a TCP optimization. This algorithm can produce a jitter of about 20ms in the ros topic.
  • The cpp API of ROS does not support disabling this on the publisher side. If you don't have control over the subscriber e.g. due to using a third party package you can create a python node which acts as a repeater for the scan topic. rospy subscriber and publisher both allow setting this flag and thus can disable it for this driver and the third party package.

Transferred IOs

The state of inputs and outputs of the PSENscan safety laser scanner are published as psen_scan_v2/IOState. The topic at /<name>/io_states is latched and always gives the most recent pin state. On changes at the physical IOs, the changes are logged to the console and the new state is published to the topic.

The input pin state contains information about

• muting
• override
• zone set switching inputs

The output pin state consists of

• OSSD safety states
• warning output
• reference points violation

Please see the message descriptions for full lists of bits.

Importing the zoneset configuration

Once you setup the scanner and created a configuration according to our tutorial you can use an exported xml configuration file within ROS. The configured zonesets will be published.

The zonesets you created in the Pilz configurator:

will be exactly the same in ROS:

You can try this out with:

roslaunch psen_scan_v2 psen_scan_v2.lauch config_file:='full_path_to/example_config.xml'

If you want to use the configuration node in your launchfile add a section such as:

   1 <node ns="$(arg laser_ns)" name="config_server_node_$(arg laser_ns)" type="config_server_node" pkg="psen_scan_v2">
   2   <param name="config_file" value="$(arg config_file)" />
   3   <param name="frame_id" value="$(arg frame_id)" />
   4 </node>

Visualizing the active zoneset

For visualizing the active zoneset in RViz you can run the active_zoneset_node. It will publish markers on the <name>/active_zoneset_markers topic like shown in the RViz screenshot above.

Report a Bug

Use GitHub to report bugs or submit feature requests. [View active issues]

Further information

You need further information? Our international hotline staff will support you individually about our ROS packages at [email protected] or visit us at https://pilz.com.

Pilz is an international-scale, innovative automation technology company. Pilz uses its solutions to create safety for man, machine and the environment. In addition to the head office in Ostfildern near Stuttgart, the family business is represented by over 2,400 employees at 42 subsidiaries and branches on all continents.

The company's products include sensor technology, electronic monitoring relays, safety relays, configurable and programmable control systems, automation solutions with motion control, systems for industrial communication as well as visualization solutions and operator terminals.

Pilz solutions can be used in all areas of mechanical engineering, including the packaging and automotive sector, plus the railway technology, press and wind energy sectors. These solutions ensure that baggage handling systems run safely at airports and funiculars or roller coasters travel safely; they guarantee fire protection an energy supply in buildings.