Jump to content

Thulium(III) oxide

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Itz.mas10 (talk | contribs) at 20:57, 29 October 2024 (Properties: further information regarding its properties). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Thulium(III) oxide
Thulium(III) oxide
Names
IUPAC name
Thulium(III) oxide
Other names
Thulium oxide, thulium sesquioxide
Identifiers
3D model (JSmol)
ECHA InfoCard 100.031.670 Edit this at Wikidata
EC Number
  • 234-851-6
UNII
  • InChI=1S/3O.2Tm/q3*-2;2*+3
  • [O-2].[O-2].[O-2].[Tm+3].[Tm+3]
Properties
Tm2O3
Molar mass 385.866 g/mol
Appearance greenish-white cubic crystals
Density 8.6 g/cm3
Melting point 2,341 °C (4,246 °F; 2,614 K)
Boiling point 3,945 °C (7,133 °F; 4,218 K)
Solubility Slightly soluble in acids
+51,444·10−6 cm3/mol
Structure
Cubic, cI80[1]
Ia-3, No. 206[1]
a = 10.49 Å[1]
16[1]
Thermochemistry
2.515 °Cp[2] (25 °C)
Hazards
GHS labelling:
GHS07: Exclamation mark
Safety data sheet (SDS) Sigma-Aldrich
Related compounds
Other anions
Thulium(III) chloride
Other cations
Erbium(III) oxide
Ytterbium(III) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Thulium(III) oxide is a pale green crystalline compound, with the formula Tm2O3. It was first isolated in 1879, from an impure sample of erbia, by Swedish chemist Per Teodor Cleve, who named it thulia.

Synthesis

Thulium(III) oxide has been made in the laboratory using various methods. One method involves burning thulium metal or its various salts in air.[3][2]

Thulium(III) oxide can be made using a hydrothermal method where thulium(III) acetate is mixed with an ammonia solution, which causes thulium(III) oxide to precipitate as a white solid.[1]

Properties

Thulium(III) oxide (Tm₂O₃) is a pale green, thermally stable powder with a high melting point of 2,341 °C and a density of 8.6 g/cm³, typically forming a cubic crystal structure.[4] It is resistant to oxidation and dissolves in strong acids like hydrochloric acid, allowing it to form soluble thulium salts.[5]

References

  1. ^ a b c d e Lee, Sung Woo; Park, Seong Kyun; Min, Bong-Ki; Kang, Jun-Gill; Sohn, Youngku (July 2014). "Structural/spectroscopic analyses and H2/O2/CO responses of thulium(III) oxide nanosquare sheets". Applied Surface Science. 307: 736–743. doi:10.1016/j.apsusc.2014.04.149.
  2. ^ a b Justice, Bruce; Westrum, Edgar; Chang, Elfreda; Radebaugh, Ray (February 1, 1969). "Thermophysical properties of the lanthanide oxides. IV. Heat capacities and thermodynamic properties of thulium(III) and lutetium(III) oxides. Electronic energy levels of several lanthanide(III) ions". Journal of Physical Chemistry. 2 (73): 333–340 – via ACSPublications.
  3. ^ Catherine E. Housecroft; Alan G. Sharpe (2008). "Chapter 25: The f-block metals: lanthanoids and actinoids". Inorganic Chemistry, 3rd Edition. Pearson. p. 864. ISBN 978-0-13-175553-6.
  4. ^ Loewen, Eric. "Thulium Oxide: Properties and Applications of This Rare Earth Compound". Standford Advanced Materials. Retrieved Oct 30, 2024.
  5. ^ Mitrovic, I.Z.; Hall, S (2015). "Atomic-layer deposited thulium oxide as a passivation layer on germanium". Journal of Applied Physics. 117: 21404. doi:10.1063/1.4922121.