Skip to content

Latest commit

 

History

History
 
 

examples

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
.cargo
.cargo
 
 
src/bin
src/bin
 
 
Cargo.toml
Cargo.toml
 
 
README.md
README.md
 
 
build.rs
build.rs
 
 
rustfmt.toml
rustfmt.toml
 
 

README.md

Examples

This package contains a number of binary applications demonstrating the use of various hardware peripherals found within ESP32 the family of devices.

Each device has its own unique set of peripherals, and as such not every example will run on every device. We recommend building and flashing the examples using the xtask method documented below, which will greatly simplify the process.

To check if a device is compatible with a given example, check the metadata comments above the imports, which will list all supported devices following the //% CHIPS: designator. If this metadata is not present, then the example will work on any device supported by esp-hal.

As previously stated, we use the cargo-xtask pattern for automation. Commands invoking this tool must be run from the root of the repository.

Building Examples

You can build all examples for a given device using the build-examples subcommand:

cargo xtask build-examples esp-hal esp32

Note that we must specify which package to build the examples for, since this repository contains multiple packages.

Running Examples

You can also build and then subsequently flash and run an example using the run-example subcommand. With a target device connected to your host system, run:

cargo xtask run-example esp-hal esp32c6 hello_world

Again, note that we must specify which package to build the example from, plus which example to build and flash to the target device.

Adding Examples

If you are contributing to esp-hal and would like to add an example, the process is generally the same as any other project.

One major difference in our case is the metadata comments which state the compatible devices and required features for an example. Both of these designators are optional; if //% CHIPS: is omitted then all devices considered to be supported, and if //% FEATURES: is omitted then no features are enabled at build time.

To demonstrated, in src/bin/embassy_hello_world.rs you will see the following:

//% CHIPS: esp32 esp32c2 esp32c3 esp32c6 esp32h2 esp32s2 esp32s3
//% FEATURES: embassy esp-hal-embassy/integrated-timers

Another thing to be aware of is the GPIO pins being used. We have tried to use pins available the DevKit-C boards from Espressif, however this is being done on a best-effort basis.

In general, the following GPIO are recommended for use, though be conscious of whether certain pins are used for UART, strapping pins, etc. on some devices:

  • GPIO0
  • GPIO1
  • GPIO2
  • GPIO3
  • GPIO4
  • GPIO5
  • GPIO8
  • GPIO9
  • GPIO10