OpenWrt官方源v2ray-core init.d 运行脚本问题 #3138
Comments
|
直接運行v2ray 不建議單獨使用v2ray |
目前新建了一个新的 init.d 脚本解决了这个问题： #!/bin/sh /etc/rc.common
USE_PROCD=1
START=99
start_service() {
procd_open_instance
procd_set_param command /usr/bin/v2ray run -config=/etc/v2ray/config.json
procd_set_param stdout 1
procd_set_param stderr 1
procd_set_param respaw
procd_close_instance
}
reload_service() {
stop
start
}对于安装时自动生成的 init.d 脚本是否是有问题呢？如果有问题，是否应该修复一下？ 而v2raya我试过，配置是方便，但配置起来没有直接配置v2ray灵活，所以就放弃了。至于passwall不太了解，是否可以使用v2ray原本的config.json文件？ 我目前做的是透明代理，看了些v2ray透明代理的教程，拼成了下面的 nftables 规则： table ip v2ray {
chain prerouting {
type filter hook prerouting priority 0 ;
ip daddr { 127.0.0.1/32, 224.0.0.0/4, 255.255.255.255/32 } return # 回环地址，保留ip地址，广播地址不代理
meta l4proto tcp ip daddr 192.168.0.0/16 return # 局域网地址TCP不代理
ip daddr 192.168.0.0/16 udp dport != 53 return # 直连局域网，53 端口除外（因为要使用 V2Ray 的 DNS)
mark 0x000000ff return # v2ray 直连出口流量
meta l4proto { tcp, udp } meta mark set 0x00000001 tproxy to 127.0.0.1:12345 accept # 其他TCP和UDP流量转发至v2ray
}
chain output {
type route hook output priority 0 ;
ip daddr { 127.0.0.1/32, 224.0.0.0/4, 255.255.255.255/32 } return # 回环地址，保留ip地址，广播地址直连
meta l4proto tcp ip daddr 192.168.0.0/16 return # 局域网地址TCP直连
ip daddr 192.168.0.0/16 udp dport != 53 return # 局域网直连，53 端口除外（因为要使用 V2Ray 的 DNS)
meta mark 0x000000ff return # 已有 v2ray 处理过的流量
meta l4proto { tcp, udp } meta mark set 0x00000001 accept # 本机被标记为1的流量转发到prerouting
}
}
# 新建 DIVERT 规则，避免已有连接的包二次通过 TPROXY，理论上有一定的性能提升
table ip filter {
chain divert {
type filter hook prerouting priority -150 ;
meta l4proto tcp socket transparent 0x00000001 meta mark set 0x00000001 accept
}
}用起来貌似没什么问题，但由于对nftables规则不熟悉，也不知道有没有潜在问题，希望有大佬帮忙看一下。另外还有个头疼的问题，access.log打印出来的日志都是ip形式的，没有域名，不容易查看哪些域名走了代理，哪些走直连，希望有大佬给个解决建议。 |
|
access.log 日志问题只需要在 inbound 中配置 sniffing 即可 |
不行，还是只有IP |
|
需要配置一下 |
|
这个配置可以运行了，感谢
脚本运行解决了，还有另一个问题“access.log 文件只打印IP，没有域名“是v2ray的问题吗？或是v2ray在这种情况下是否能打印出域名？对于这个问题，当前 issue 还有没有打开的必要？我就先不关闭了 |
安装的版本，OpenWrt官方源v2ray-core 5.16.0-1：
直接运行命令
v2ray run -config /etc/v2ray/config.json可以正常运行，在config.json中配置的日志文件中能看到启动日志：使用安装后自动生成的 init.d
/etc/init.d/v2ray start脚本运行，终端没输出，在config.json中配置的日志文件没有日志打印 ，然后再运行/etc/init.d/v2ray status输出active with no instances：init.d 脚本：
OpenWrt系统信息：
**v2ray配置信息＊*:
{ "log": { "access": "/var/log/v2ray/access.log", "error": "/var/log/v2ray/error.log", "loglevel": "debug" }, "dns": { "servers": [ "8.8.8.8", "1.1.1.1", { "address": "223.5.5.5", "domains": [ "geosite:cn", "ntp.org", ... "friendlyelec.com.cn" ] } ] }, "inbounds": [ { "tag": "all-in", "port": 12345, "protocol": "dokodemo-door", "settings": { "network": "tcp,udp", "followRedirect": true }, "sniffing": { "enabled": true, "destOverride": ["http", "tls"] }, "streamSettings": { "sockopt": { "tproxy": "tproxy", "mark": 255 } } } ], "outbounds": [ { "protocol": "trojan", "settings": { "servers": [ { "address": "xxx.com", "port": 443, "password": "xxx", "email": "[email protected]", "level": 0 } ] }, "streamSettings": { "network": "ws", "security": "tls", "tlsSettings": { "serverName": "xxx.com" }, "wsSettings": { "path": "/admin" }, "sockopt": { "mark": 255 } }, "tag": "proxy" }, { "tag": "direct", "protocol": "freedom", "settings": { "domainStrategy": "UseIP" }, "streamSettings": { "sockopt": { "mark": 255 } } }, { "tag": "block", "protocol": "blackhole", "settings": { "response": { "type": "http" } } }, { "tag": "dns-out", "protocol": "dns", "streamSettings": { "sockopt": { "mark": 255 } } } ], "routing": { "domainStrategy": "IPIfNonMatch", "rules": [ { "type": "field", "inboundTag": ["all-in"], "port": 53, "network": "udp", "outboundTag": "dns-out" }, { "type": "field", "inboundTag": ["all-in"], "port": 123, "network": "udp", "outboundTag": "direct" }, { "type": "field", "ip": [ "223.5.5.5" ], "outboundTag": "direct" }, { "type": "field", "ip": [ "8.8.8.8", "1.1.1.1" ], "outboundTag": "proxy" }, { "type": "field", "domain": ["geosite:category-ads-all"], "outboundTag": "block" }, { "type": "field", "protocol": ["bittorrent"], "outboundTag": "direct" }, { "type": "field", "domain": [ "ntp.org", ... "friendlyelec.com.cn" ], "outboundTag": "direct" }, { "type": "field", "outboundTag": "proxy", "domain": [ "geosite:google", "geosite:facebook", "geosite:twitter", "geosite:telegram", "github.io", ... "googleapis.com" ] }, { "type": "field", "ip": ["geoip:private", "geoip:cn"], "outboundTag": "direct" }, { "type": "field", "domain": ["geosite:cn"], "outboundTag": "direct" }, { "type": "field", "ip": ["geoip:private", "geoip:cn"], "outboundTag": "direct" } ] } }对 init.d 的脚本不熟悉，自动生成的脚本是否有问题？还是我运行命令有问题？我应该修改或新建新的运行脚本吗？
The text was updated successfully, but these errors were encountered: