Adding `msb_krun` library as a dependency

Run this command in a terminal, in your project's directory:

cargo add msb_krun

To add it manually, edit your project's Cargo.toml file and add to the [dependencies] section:

msb_krun = "0.1.2"

The msb_krun library will be automatically available globally.

Back to the crate overview.

Readme

libkrun

libkrun is a dynamic library that allows programs to easily acquire the ability to run processes in a partially isolated environment using KVM Virtualization on Linux and HVF on macOS/ARM64.

It integrates a VMM (Virtual Machine Monitor, the userspace side of an Hypervisor) with the minimum amount of emulated devices required to its purpose, abstracting most of the complexity that comes from Virtual Machine management, offering users a simple C API.

Use cases

crun: Adding Virtualization-based isolation to container and confidential workloads.
krunkit: Running GPU-enabled (via venus) lightweight VMs on macOS.
muvm: Launching a microVM with GPU acceleration (via native context) for running games that require 4k pages.

Goals and non-goals

Goals

Enable other projects to easily gain KVM-based process isolation capabilities.
Be self-sufficient (no need for calling to an external VMM) and very simple to use.
Be as small as possible, implementing only the features required to achieve its goals.
Have the smallest possible footprint in every aspect (RAM consumption, CPU usage and boot time).
Be compatible with a reasonable amount of workloads.

Non-goals

Become a generic VMM.
Be compatible with all kinds of workloads.

Variants

This project provides the following variants of the library:

libkrun: Generic variant compatible with all Virtualization-capable systems.
libkrun-sev: Variant including support for AMD SEV (SEV, SEV-ES and SEV-SNP) memory encryption and remote attestation. Requires an SEV-capable CPU.
libkrun-tdx: Variant including support for Intel TDX memory encryption. Requires a TDX-capable CPU.
libkrun-efi: Variant that bundles OVMF/EDK2 for booting a distribution-provided kernel (only available on macOS).

Each variant generates a dynamic library with a different name (and soname), so both can be installed at the same time in the same system.

Virtio device support

All variants

virtio-console
virtio-block
virtio-fs
virtio-gpu (venus and native-context)
virtio-net
virtio-vsock (for TSI and socket redirection)
virtio-balloon (only free-page reporting)
virtio-rng
virtio-snd

Networking

In libkrun, networking is provided by two different, mutually exclusive techniques: virtio-vsock + TSI and virtio-net + passt/gvproxy.

virtio-vsock + TSI

This is a novel technique called Transparent Socket Impersonation which allows the VM to have network connectivity without a virtual interface. This technique supports both outgoing and incoming connections. It's possible for userspace applications running in the VM to transparently connect to endpoints outside the VM and receive connections from the outside to ports listening inside the VM.

Enabling TSI

TSI for AF_INET and AF_INET6 is automatically enabled when no network interface is added to the VM. TSI for AF_UNIX is enabled when, in addition to the previous condition, krun_set_root has been used to set / as root filesystem.

Known limitations

Requires a custom kernel (like the one bundled in libkrunfw).
It's limited to SOCK_DGRAM and SOCK_STREAM sockets and AF_INET, AF_INET6 and AF_UNIX address families (for instance, raw sockets aren't supported).
Listening on SOCK_DGRAM sockets from the guest is not supported.
When TSI is enabled for AF_UNIX sockets, only absolute path are supported as addresses.

virtio-net + passt/gvproxy

A conventional virtual interface that allows the guest to communicate with the outside through the VMM using a supporting application like passt or gvproxy.

Enabling virtio-net

Use krun_add_net_unixstream and/or krun_add_net_unixdgram to add a virtio-net interface connected to the userspace network proxy.

Security model

The libkrun security model is primarily defined by the consideration that both the guest and the VMM pertain to the same security context. For many operations, the VMM acts as a proxy for the guest within the host. Host resources that are accessible to the VMM can potentially be accessed by the guest through it.

While defining the security implementation of your environment, you should think about the guest and the VMM as a single entity. To prevent the guest from accessing host's resources, you need to use the host's OS security features to run the VMM inside an isolated context. On Linux, the primary mechanism to be used for this purpose is namespaces. Single-user systems may have a more relaxed security policy and just ensure the VMM runs with a particular UID/GID.

While most virtio devices allow the guest to access resources from the host, two of them require special consideration when used: virtio-fs and virtio-vsock+TSI.

virtio-fs

When exposing a directory in a filesystem from the host to the guest through virtio-fs devices configured with krun_set_root and/or krun_add_virtiofs, libkrun does not provide any protection against the guest attempting to access other directories in the same filesystem, or even other filesystems in the host.

A mount point isolation mechanism from the host should be used in combination with virtio-fs.

In addition, when using virtio-fs, a guest may exhaust filesystem resources such as inode limits and disk capacity. Controls should be implemented on the host to mitigate this.

virtio-vsock + TSI

When TSI is enabled, the VMM acts as a proxy for AF_INET, AF_INET6 and AF_UNIX sockets, for both incoming and outgoing connections. For all that matters, the VMM and the guest should be considered to be running in the network context. As such, you should apply on the VMM whatever restrictions you want to apply on the guest.

Building and installing

Linux (generic variant)

Requirements

libkrunfw
A working Rust toolchain
C Library static libraries, as the init binary is statically linked (package glibc-static in Fedora)
patchelf

Optional features

GPU=1: Enables virtio-gpu. Requires virglrenderer-devel.
VIRGL_RESOURCE_MAP2=1: Uses virgl_resource_map2 function. Requires a virglrenderer-devel patched with 1374
BLK=1: Enables virtio-block.
NET=1: Enables virtio-net.
SND=1: Enables virtio-snd.

Compiling

make [FEATURE_OPTIONS]

Installing

sudo make [FEATURE_OPTIONS] install

Linux (SEV variant)

Requirements

The SEV variant of libkrunfw, which provides a libkrunfw-sev.so library.
A working Rust toolchain
C Library static libraries, as the init binary is statically linked (package glibc-static in Fedora)
patchelf
OpenSSL headers and libraries (package openssl-devel in Fedora).

Compiling

make SEV=1

Installing

sudo make SEV=1 install

Linux (TDX variant)

Requirements

The TDX variant of libkrunfw, which provides a libkrunfw-tdx.so library.
A working Rust toolchain
C Library static libraries, as the init binary is statically linked (package glibc-static in Fedora)
patchelf
OpenSSL headers and libraries (package openssl-devel in Fedora).

Compiling

make TDX=1

Installing

sudo make TDX=1 install

Limitations

The TDX flavor of libkrun only supports guests with 1 vCPU and memory less than or equal to 3072mib.

macOS (EFI variant)

Requirements

A working Rust toolchain
A host running macOS 14 or newer

Compiling

make EFI=1

Installing

sudo make EFI=1 install

macOS (generic variant)

Requirements

A working Rust toolchain
A host running macOS 14 or newer
Homebrew packages lld and xz

Compiling

make [FEATURE_OPTIONS]

The init binary is cross-compiled using clang and lld. A suitable sysroot is automatically generated by the Makefile from Debian repository.

Installing

sudo make [FEATURE_OPTIONS] install

Using the library

Despite being written in Rust, this library provides a simple C API defined in include/libkrun.h

Examples

chroot_vm

This is a simple example providing chroot-like functionality using libkrun.

Building chroot_vm

To be able to chroot_vm, you need need to build libkrun with the virtio-block and virtio-net optional features:

make BLK=1 NET=1
sudo make BLK=1 NET=1 install
cd examples
make

Running chroot_vm

To be able to chroot_vm, you need first a directory to act as the root filesystem for your isolated program.

Use the rootfs target to get a rootfs prepared from the Fedora container image (note: you must have podman installed):

make rootfs

Now you can use chroot_vm to run a process within this new root filesystem:

./chroot_vm ./rootfs_fedora /bin/sh

If the libkrun and/or libkrunfw libraries were installed on a path that's not included in your /etc/ld.so.conf configuration, you may get an error like this one:

./chroot_vm: error while loading shared libraries: libkrun.so: cannot open shared object file: No such file or directory

To avoid this problem, use the LD_LIBRARY_PATH environment variable to point to the location where the libraries were installed. For example, if the libraries were installed in /usr/local/lib64, use something like this:

LD_LIBRARY_PATH=/usr/local/lib64 ./chroot_vm rootfs_fedora/ /bin/sh

Status

libkrun has achieved maturity and starting version 1.0.0 the public API is guaranteed to be stable, following SemVer.

Getting in contact

The main communication channel is the libkrun Matrix channel.

Acknowledgments

libkrun incorporates code from Firecracker, rust-vmm and Cloud-Hypervisor.

Adding msb_krun library as a dependency

Adding `msb_krun` library as a dependency