Search Results for "bootloader firmware"

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? ...

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due).

Simple command-line tool to download/upload firmware to/from STM32 MCU with factory preprogrammed serial bootloader. Look <a href="http://openfacts2.berlios.de/wikien/index.php/BerliosProject:STM%20Flasher">wiki</a> for more info.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.