Open Source Embedded Systems Software

TeutonPE is inspired by PortableApps.com combined with a PeBuilder compiled Boot USB / CD. Programs can be used, even when there is no OS installed. BB4win is used for Live Menu and as the default Shell.All Plugins are also BartPE & XPE compatible

eChanter is an Open Source electronic bagpipe project, based on the Arduino platform, using capacitive touch sensors, with polyphonic wavetable synthesis PCM audio at 8KHz. See Files for the development version, eChanter v3.0.

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. In order to run the system in hardware a SDRAM and SRAM controller need to be added. These are currently in development.

Unix-like operating system for the TI-89 and TI-92+ graphing calculators.

this project purpose is create simple interface between LCD and AVR Device

Arduino al/az mount controller based on lx200 protocol.

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. In case of usage, please refer to our publication: Muhammad Shafique, Rehan Hafiz, Semeen Rehman, Walaa El-Harouni, Jörg Henkel, "Cross-Layer Approximate Computing: From Logic to Architectures", Design Automation Conference (DAC), 2016. Contributors: Authors, Vanshika Baoni, M. Abdullah Hanif http://ces.itec.kit.edu/lpACLib.php

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

EfiPy is a Python Module on UEFI shell which can access UEFI BIOS kernel interface - System Table - Runtime Services - Boot Services pAnalyzer package - Tracing UEFI protocol calling flow Output protocol flow to screen or file with XML format CorePy (assembly package) - Simple Assembly code in Python environment. EfiPy Shell package- Simple uefi shell program coded with EfiPy library to prove EfiPy workable EfiPy leverage these open source packages - ctypes, CorePy. Samples https://sourceforge.net/u/efipy/svn/HEAD/tree/Trunk/ EfiPy Author: https://www.linkedin.com/in/max-wu-a9068b90/

FRSH/FORB is a contract-based resource reservation framework for distributed real-time applications.

FridgeDuino is a firmware for an Arduino based fridge control. The code follows a modular design, separating the core functionality from the user interface. This allows easy integration with user interfaces from different manufacturers. For the GPL version, only the Whirlpool WRM series is supported. Feel free to contact us for any particular customization.

The GoodFET is an open source JTAG programmer based upon the Texas Instruments Flash Emulation Tool. While retaining partial compatibility with the TI design, the eventual goal of this project is standalone firmware with no proprietary components.

JBernstein is a tool implemented in Java that enables to check whether a polynomial constraint holds for all variables within their domain. It is mainly used in the verification or synthesis of cyber-physical systems where the system model is nonlinear. The tool also supports specifications in assume-guarantee style. The underlying algorithm is based on a translation to Bernstein polynomials, and several optimization techniques are implemented to ensure efficiency. Concerning performance, the tool enables to check all examples in the PVS Bernstein testsuite within a second, which can be an order of magnitude faster than some other tools such as QEPCAD or REDLOG. Although JBernstein uses double, it offers automatic error-estimation capabilities (experimental) so that the generated result is correct (the solver may return unknown when the error-estimate is too large)

This project is about enhancing user experience in wireless 802.15.4 chips through open source programmer, bootloader, flashing over the air, and viral flashing over WSN. Current development is done over CC2430 and STM32.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.

PerLa project aims at defining a full declarative high level language that allows to query a pervasive system, hiding the difficulties related to the need of handling different technologies.

PXC is a new C-Crosscompiler-Project, based on PCC the UNIX(TM)-Original. Aimed at ISO-9899:99/201x Feature-Completness and easy retargeting. The Toolchain will consist of an Assembler, Linker, Librarian and an integrated MISRA-C-Checker.

The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application. This simulator requires the Microsoft Visual Studio (Visual C++) programming environment.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

SmartSlog (Smart Space Ontology) is a software/application development kit (SDK or ADK) for programming Smart-M3 agents (Knowledge Processors, KPs) that consume/produce smart space content according with its high-level ontological representation. SmartSlog applies the code generation approach: given an OWL ontology description, the ontology programming library is produced. The latter provides API to access the smart space via a Smart-M3 Semantic Information Broker (SIB) and data structures and functions to represent and maintain locally in KP code all ontology classes, relations, properties, and individuals. Since 2012 the project is supported by grant KA179 of Karelia ENPI programme, http://kareliaenpi.eu/ More information about project: http://oss.fruct.org/wiki/SmartSlog Smart-M3 on Wikipedia: http://en.wikipedia.org/wiki/Smart-M3

Specter - Abstract Arithmetics Library (AAL) is a library coded in native C which is able to do operations with numbers of virtually unlimited length. Specter is targeting mainly cryptography and big integer maths though.

A system that allows people to open doors by using a Bluetooth enabled phone or other device.

Implementation of virtual threads for the XS-1. Currently a simple context switching implementation for the XMOS XS-1 architecture (Gn, Ln products). Allows a user to run low speed processes on a single thread using time sliced scheduling.