Search Results for "c ide"
Sort By:
Showing 75 open source projects for "c ide"
View related business solutions-
Go From Idea to Deployed AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
Powerful App Monitoring Without Surprise BillsTired of monitoring tools that punish you for scaling? AppSignal offers transparent, predictable pricing with every feature unlocked on every plan. Track errors, monitor performance, detect anomalies, and manage logs across Ruby, Python, Node.js, and more. Trusted by developers since 2012 with free dev-to-dev support. No credit card required to start your 30-day trial.
-
1
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
4
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE,... -
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
5
SerenityOS
The Serenity Operating System
SerenityOS is an open source Unix-like operating system project with its own custom kernel, graphical user interface, system libraries, and userland tools. It combines a nostalgic “90s UI aesthetic” with modern system capabilities: a preemptive, multi-threaded kernel, own browsers, network stack, file systems, IPC, security features, and a suite of graphical / developer applications. The project is both a hobbyist OS and a polished engineering sandbox. -
6
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each... -
7
eS
Cross-platform IDE for developing embedded solutions and desktops
Solution Editor (eS) is a free, lightweight, cross-platform, development environment (IDE) for Assembler, C or C++ programming, designed to interface with various compilers and debuggers (GDB,CDB). The environment allows you to develop and debug code for MIPS, ARM, AVR and any other processors for embedded solutions and desktop applications. It contains a minimum of settings for easy and convenient programming. The hardware debugging process is possible if you have the hardware and / or software for this purpose. ... -
8
*** Please note that the downloads here on Sourceforge are out of date! See https://gexperts.dummzeuch.de for the latest releases. *** GExperts is a free set of tools built to increase the productivity of Delphi and C++Builder programmers by adding several features to the IDE. GExperts is developed as Open Source software and encourages user contributions to the project.
-
9
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
10
MC 6800 Emulator for Teensy 4
6800 Emulator runs on Teensy 4 processor
6800/ET-3400 Emulator, designed for the Teensy 4.0/4.1 processors. Build this with the Arduino IDE 2.0. Full Source and readme included in archive. Programs written in 6800 assembly can be run in the emulator. It supports two modes of operation, an internal monitor program and a mode that emulates the Heathkit ET3400 (and ET-6800) microprocessor trainers. Motorola released the MC6800 chip in 1974. It was a source of inspiration for the designers of the more popular (and cheaper) 6502 chip... -
11
SerpaeOS
A cute and educational x86 OS
SerpaeOS is a free, open-sourced x86 OS. It aims to provide a good resource for OSDevers to observe how certain features are implemented. The latest version is 23.2.1 Have a tip? Found a bug? Have a comment? Want to help? Contact us at serpaeos.devers@gmail.com Buy me a coffee! :) https://bmc.link/serpaeosdeL System Requirments: *4 GB Memory *4GB minimum PATA Hard Disk connected to the master slot on the primary IDE controller. *x86 processor -
12
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
13
dune-archiso
Archiso profile based on CyberOS with DUNE Numerics
This is a live USB containing a full operating system that can be booted, this means that you can use a USB stick to burn this image or virtualize it to Linux-KVM, QEMU, Virtualbox, VMWare, Hyper-V. We included the following Arch Linux official repositories: - [core] - [extra] - [community] - [multilib] as well as Third-party repositories: - [arch4edu] - [cyber] - [dune-archiso-repository-core] - [dune-archiso-repository-extra] - [dune-core] - [dune-staging] -... -
14
Raspberry Pi Paper Tape
Hardware and software that I used to read some old 8 bit paper tapes
A simple project to interface an old paper tape reader to a Raspberry Pi 3B. I find the C language easiest for me, and the libraries needed, were already installed in my version of raspbian. The Oliver Audio Engineering paper tape reader runs on 5V, but the Raspberry Pi runs on 3.3V. -
15
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries... -
16
Integrated Development Environment for some microcontrollers based on 8051(e.g. AT89S8253). Supported languages are Assembly and C. It has its own simulator, assembler, editor and many other tools. See the project web site for more details and the newest updates.
-
17
lilith
x86-64 os made in crystal
A POSIX-like x86-64 kernel and userspace written in Crystal. A CPU with x64 support is required to run the OS. The Makefile provides a script that will run QEMU on the kernel. To run with storage, an MBR-formatted hard drive image with a FAT16 partition must be provided in the running directory with the name drive.img. The kernel will automatically boot the main.bin executable on the hard drive, or panic if it can't be loaded. -
18
handy
A simple C++11 network server framework
Simple and easy-to-use C++11 network library/ Supports tens of millions of concurrent connections on a single machine/ a simple C++11 network server framework. Graceful exit allows programmers to better define the exit behavior of their programs. You can better check for memory leaks with tools such as valgrind. 10 lines of code to write a complete server. Asynchronously manages network I/O and processes requests synchronously, which simplifies the writing of server processing logic. For... -
19
DHT22-MQTT-Sensor-ESP8266 (NodeMCU)
Use DHT22 temperature / humidity sensor on NodeMCU (ESP8266) with MQTT
This is a Sketch for the arduino IDE to enable the usage of a DHT22 sensor connected to a NodeMCU (ESP8266) with MQTT. Also supported are 2 status LED's and a SPI diaplay. After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall. During AP-mode and client-mode, there are some RESTful functions... -
20
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can... -
21
openCONFIGURATOR
An Open Source POWERLINK network configuration toolkit
openCONFIGURATOR is an open-source configuration framework for easy setup, configuration and maintenance of any POWERLINK (https://goo.gl/U9tjiy) network. It ideally complements openPOWERLINK, the open source POWERLINK protocol stack for master and slave. The project consists of a core library implementing the configuration algorithms and an eclipse plugin base user interface. For XDD tooling and validation support within eclipse please visit: https://goo.gl/NBytgg Please use the... -
22
Phosphorus Five
A Full Stack RAD Web Application Development Framework
Phosphorus Five is a full-stack, web-based app framework and operating environment designed to simplify secure and modular web application development. It enables developers to create modular web apps using the Hyperlambda language, which focuses on logic and data manipulation with minimal syntax. Phosphorus Five includes its own web server, authentication mechanisms, plugin architecture, and UI components, making it an all-in-one solution for web-based automation, admin panels, and intranet... -
23
Fiwix
A UNIX-like kernel for the i386 architecture
FiwixOS 3 is a Fiwix distribution, an operating system made from a software collection that is based upon the Fiwix kernel. It basically comprises a Fiwix kernel, GNU tools, libraries and additional software. All the included software is free and open-source software made available both as compiled binaries and in source code form, which allows modifications to the original software. FiwixOS 3 uses the Newlib v3.1.0 as its C standard library, and the Ext2 as its primary file... -
24
Tiny i8080 emulator
Customized C# Intel 8080 emulator
A new customized version of the very good project called "C# Intel 8080 emulator" by simontoft. Needs to be completed to run CP/M. Please support this project by donating to this fundraiser: ------------------------------------------- Give birth to new travel bicycles!!! https://gofund.me/2201d2a4 ------------------------------------------- -
25
vcproj2cmake
Visual Studio .vc[x]proj to CMakeLists.txt (make, Ninja ...) enabler
Elaborate Visual Studio .vcxproj / .vcproj projects to CMakeLists.txt converter, enabling Makefile or Ninja or IDE builds, i.e. full multi-platform CMake functionality (Linux, Mac, Windows...). Live Update capability: supports side-by-side tracking of evolving original proj files, within build tree!! Script hooks for static CMake defs, powerful definition-to-variable mapping. Access to project data content is via git repository _only_ (it's a developer infrastructure project, thus...
