Activity for Hamlib

  • Joe Traylor Joe Traylor posted a comment on discussion Open Discussion

    I am connecting a K2 with PC running Ubuntu 20.04. wsjtx configuration gives rig.c(972):rig_open error. I have settings Serial Port /dev/ttyUSB0, Baud 4800, 8 data bits, 2 stop bits, NONE handshake, PTT set to CAT, Mode set to USB, Split Op set to None. The PC properly sees the FTDI cable. The K2 is hearing signals. I have the K2 headphone output connected to PC mic input. The PC spkr output is connected to the K2 mic input. This arrangement worked correctly when I was used PTT set for VOX control;...

  • joe perry joe perry posted a comment on discussion Open Discussion

    can not get hamlib on msn 20h2 to work.. i have installed and deleted lib 3.0 3.1, 3.2 and 3.3 at 64bit machine installed lastest prolific driver.. the drive chip check works.. see the chip pl2303 RA type..but rigctl -l does not work .. there is no PATH installed when you run hamlib.exe install.. if you manually put in PATH to it then rigctl -l shows the list.. rigctl -m 214 -r com3 says NO CONNECTIONS. on win10pro 20h2, and also not working on win10pro 1909 for some reason.. works only on win7 versions....

1