[BUILDROOT] 2025.02: pixman: patch to fix NEON support on AArch64
[BUILDROOT] Bump to BR 2025.02.9
[BUILDROOT] Bump to BR 2025.02.8
[BUILDROOT] 2025.02: patches to update mwifiex and nxp-bt-wifi-firmware
[BUILDROOT] opos91/opos93{,sp}: bump U-Boot to 38df9eef8f74bcb222c3ddf407a91b57732d8366
configs: opos91: enable GPIOs driver
[BUILDROOT] opos91/opos93{,sp}: bump Linux to 14cb99b49f1d6f52ef189cc1c0d6f265383ad1ba
[LINUX] 6.12: add a configuration to give it a try on OPOS6UL
[BUILDROOT] opos93: add opos93sp-legacy-6.12_defconfig
.gitlab-ci.yml: build opos91-legacy-6.12_defconfig
[BUILDROOT] add OPOS91 and OPOS91Dev support (w/ and w/o OPTEE)
[BUILDROOT] opos93: add opos93-{,optee}-legacy-6.12_defconfig
[BUILDROOT] 2025.02: patches to update fimware-ele-imx and firmware-imx
[BUILDROOT] Bump to BR 2025.02.7
configs: opos91: disable DM_THERMAL
configs: add opos91dev_optee_defconfig
arm: CONFIG_IMX93_OPOS91 -> CONFIG_IMX91_OPOS91
arm: add OPOS91 and OPOS91Dev support
LFU-904 ddr: imx9: fix refresh rate when dyn_ref is disabled
LFU-895 ddr: imx9: Fix DYN_REF collision with SW driven mode register operation
LFU-715 arm: imx9: Fix LPCG number in ccm_reg structure
LFU-917 imx9: clock: Fix missing break in get_clk_src_rate
LFU-848 iMX91: Update part number detection
imx9: trdc: correct DEBUG usage
imx9: trdc: introduce trdc_mbc_blk_num
imx9: trdc: cleanup code
imx: Use per board ddrphy_trained_csr
arm64: dts: add NXP i.MX91 device tree
pinctrl: imx93: support i.MX91
ddr: imx: Add new rates for i.MX91
clk: imx: clk-fracn-gppll: Add new PLL rate
clk: imx93: support i.MX91
imx: Add iMX91 support
dt-bindings: imx93: sync clock header
imx: imx9: Imply IMX_TMU
imx93: Update 9x9 part fuses checking
imx9: clock: Fix board_interface_eth_init for FEC
hardware: Add opos93 KiCAD files
[BUILDROOT] Bump to BR 2025.02.6
[LINUX] 4.19: refresh patches so they apply with --fuzz=0
[BUILDROOT] opos6ul{,nano}: add firmwares for LBEE5KL1YN
[BUILDROOT] 2025.02: patch to bump murata-cyw-fw
[LINUX] 5.10: patch to add LBEE5KL1YN Bluetooth support
[LINUX] 5.10: backport patches to add LBEE5KL1YN support
[BUILDROOT] 2025.02: opos93sp: bump Linux to e6494020ade6f5196e058e76f00ae1a7751dff49
[BUILDROOT] 2025.02: opos93sp: add default bitstream
[BUILDROOT] 2025.02: patch to fix python-numpy build
BUILDROOT] 2025.02: patch to bump gst1-plugins-bayer2rgb-neon
[BUILDROOT] opos93: add opos93-optee-legacy-6.1_defconfig
[BUILDROOT] 2025.02: backport patches to bump optee packages to 4.6.0
Makefile: fix help message when BR is not configured
configs: opos93dev_optee_defconfig: set loadaddr to 0x82000000
imx93: move OP-TEE at the start of the DRR
LF-15212 fix(imx8m): add mask for jr0mid check
LF-14731 fix(imx94): remove the SCMI_RESUME_CPU flag
LF-14353 fix(imx93): reduce the bl31 limit
LF-15175 feat(imx8ulp): add retention support for lpddr3
LF-15058 fix(imx8mq): fix the build for rdc_csu_test
LF-15102 fix(scmi): fix build break when DEBUG=1 for imx95
LF-14579 fix(imx8ulp): retry if upower return UPWR_RESP_RESOURCE err
LF-15061-03 fix(imx94): fix the out of bound access
LF-15061-02 fix(imx95): fix out of bound access
LF-15061-01 fix(scmi): use bitwise operator
LF-13064 feat(imx95): Fix bug to ensure A0 can work
LF-15054 feat(imx8mm) Set RDC to level 0
MA-23605 android: imx8mq: disable logs to save memory
MA-23381 imx943: add trusty support
spd: trusty: clear CPTR_EL3.TFP in resume
trusty: delete the fp registers save&restore at init stage
simd: Fix base register in fpregs_context_*
Revert "spd: trusty: only process one function ID at a time"
spd: trusty: Add header file for plat_trusty_set_boot_args
spd: trusty: Be robust against bad core orders
trusty: rework trusty setup/init boot args handling
LF-13064 feat(imx95): Dynamically detect silicon revision
LF-14969 fix(nxp-tools): fix build break
LF-14964: fix(imx95): switch to forceful LM shutdown
LF-14705 imx: support LMM for M7
LF-14609-07 fix(imx943): add xspi MTO register save/restore
LF-14609-06 fix(imx943): add gpio & wdog save/restore
LF-14609-05 feat(imx943): Add the mcore boot support for imx94
LF-14609-04 fix(imx943): enable the wdog3 lpm control by default
LF-14609-03 fix(imx94) Add semaphore used for quiescing the gic
LF-14609-02 feat(imx943): add initial support for imx94
LF-14609-01 refactor(imx9): refine the imx95 for imx943 support
LF-14401 Add Copyright for some files without copyright in ATF
MA-23473 imx93: fix memory map failed with QNX SPL
MA-23254-3 [8QXP] Fragment secure heap and vpu boot memory
MA-23254-2 [8QXP]Configure can only be controlled by the secure world
MA-23254 [8QXP] Security configure for widevine L1 on imx8qxp
LF-14247 imx95: fix m7 status check
LF-14043 feat(imx91): update security policies of ocram region
LF-14079 feat(imx8ulp): update the ddr retention flow
LF-13160-3: plat: imx8ulp: scmi sensor update temp return val
LF-13160-2: drivers: scmi-msg: sensor: follow return temp val with spec data types
LF-13160-1: plat: imx8ulp: scmi sensor: fix invalid temp error
LF-11519-2: plat: imx8ulp: apd context: save/restore tpm6
LF-11519-1: plat: imx8ulp: bl31 setup: start tpm6 clock
MA-23026 Fix bug: failed boot on LS platforms due caam driver
LF-13734 fix(imx95): add missing license header