Activity for Switch Miner
-
Tom Pane created ticket #14
Errorr 0xc00007b
-
Oscar Liu created ticket #14
SwitchMiner exit unexpectedly when I scan Extreme Network switches
-
Jorge Carrizosa created ticket #13
Question on field "Last Change"
-
Timothy McKee created ticket #13
Console 3.30 infection
-
dan cabral posted a comment on ticket #9
Hey There, Kindly review the following below files at your very first convenience and make sure you provide us with your comment, if any, on it: https://confluenceevent.com/cu/rsutetqeaa
-
michael zedalis created ticket #12
Discover Stops working on Random ports
-
Port Scanning
-
Brian Guinane created ticket #16
Feature Request to add support for Dell os10 switches
-
Shyamaladevi Sabapathy created ticket #10
Unable to get mac address and IP address information while querying Dell os10 switches
-
maurizio barozzi created ticket #11
print preview
-
Error Counter
-
Abnix posted a comment on ticket #9
I just found that if first install Microsoft Visual C++ 2015 Redistributable (x86 or x64) and then you copy mfc140u.dll from "C:\Windows\System32" to "C:\Program Files (x86)\Switch Miner\sm" the application will then launch. Good luck.
-
mfc140u.dll missing
-
Christian Ledford created ticket #15
SNMP QUERY A RANGE OF IP
-
SWITCH MAKE/MODEL IN REPORT
-
Jim Stites posted a comment on ticket #9
I should note that the file is there, so it's not missing
-
mfc140u.dll
-
Billy Yawn posted a comment on discussion Help
Should be fixed in the 4.21 release, just posted.
-
CAT 9300 and 2960C do not display results
-
Should be fixed in V4.21 just released.
-
Switch Miner 4.21 Released
-
Switch Miner released /Switch_Miner_GUI_Win32/SMV421/Switch_Miner_W32_GUI_Source4.21.zip
-
-
Mike Ziolkowski created ticket #8
Crash
-
One other note the 2960C-8PC-L running IOS 15.0(2).SE works, but IOS 15.2(2).E6 fails.
-
Sorry it has taken so long to get this info.... From the switch, with debug snmp packets running, I can see it pull and get a NULL value. Log Buffer (4096 bytes): ry.13.1011 = entPhysicalEntry.13.1012 = entPhysicalEntry.13.1013 = entPhysicalEntry.13.1015 = entPhysicalEntry.13.1017 = entPhysicalEntry.13.1018 = entPhysicalEntry.14.1001 = entPhysicalEntry.14.1002 = entPhysicalEntry.14.1003 = entPhysicalEntry.14.1004 = entPhysicalEntry.14.1005 = 10001 entPhysicalEntry.14.1006 = 10002 entPhysicalEntry.14.1007...
-
TonyWarren posted a comment on ticket #7
Following, as I have same issue. Tried several cisco switches, starts to run then just closes. Looking at logs, I also see lots of these: Error Invalid UTF-8 sequence found in input string. Happy to provide more logs if useful.
-
Hey Christian, can you do these with a debug running? Go to View->Debug Options and select analysis engine, snmp and snmp OID. Once it finishes you will have a log file in your %APPDATA% folder in the directory switch miner called sm.log. If you could email me the log file. On Mon, Jul 6, 2020 at 8:04 AM Christian Ledford cyborgz@users.sourceforge.net wrote: [bugs:#8] https://sourceforge.net/p/switchminer/bugs/8/ CAT 9300 and 2960C do not display results* Status: open Group: v1.0 Created: Mon Jul...
-
CAT 9300 and 2960C do not display results
-
Hey Jeff, i'll look through the logs, thanks. On Mon, Mar 9, 2020 at 6:14 PM Jeff Hooper jeffhooper@users.sourceforge.net wrote: [support-requests:#7] https://sourceforge.net/p/switchminer/support-requests/7/ Switch Miner v4.2 crashes with snmp v3 scan* Status: open Group: v1.0_(example) Created: Mon Mar 09, 2020 10:14 PM UTC by Jeff Hooper Last Updated: Mon Mar 09, 2020 10:14 PM UTC Owner: Billy Yawn Attachments: 2020-03-09 17_13_36-Window.png https://sourceforge.net/p/switchminer/support-requests/7/attachment/2020-03-09%2017_13_36-Window.png...
-
Jeff Hooper created ticket #7
Switch Miner v4.2 crashes with snmp v3 scan
-
Peter Spichtig posted a comment on discussion Help
Hello Billy Problem solved! Thank you! There was a "@" in the community string. Now it works well on all Switches again! Sincerly, Peter ----Ursprüngliche Nachricht---- Von : yawnb@users.sourceforge.net Datum : 02/03/2020 - 22:04 (MN) An : 471004@discussion.switchminer.p.re.sourceforge.net Betreff : [switchminer:discussion] Re: snmp timeout on C9300-48P with 16.9.4 Hey Peter, i looked at the log. Do you use the same community string across all your devices? It appears you may have an @ symbol in...
-
Hey Peter, i looked at the log. Do you use the same community string across all your devices? It appears you may have an @ symbol in your community string. The way SNMP v2 works is to get the mac addresses of a specific VLAN you add a @<vlan num=""> to the community. So to get the MAC's from VLAN 1 you would send mycommunity@1. If you have an @ in the community like my@community@1 that may be causing the failure, if this same community works with other devices its possible it's something specific...
-
Hi Billy Thank you for the Message! And sorry for delay. We had Carneval 8-) We use snmp v2. Privilege Level 15. The sm.log is attacht. I hope the log helps us to find the error. SwitchMiner is a very cool Tool! I wish you a nice Day! Sincerly, Peter ----Ursprüngliche Nachricht---- Von : yawnb@users.sourceforge.net Datum : 21/02/2020 - 14:48 (MN) An : 471004@discussion.switchminer.p.re.sourceforge.net Betreff : [switchminer:discussion] Re: snmp timeout on C9300-48P with 16.9.4 Hey Peter, if you could...
-
Hey Peter, if you could do a debug of that. In the GUI version go to view->debug options and the select snmp. Run it again and let it fail. Look in the %APPDATA% folder and there will be a folder named switch miner it should have a file sm.log. Can you send that to me? Also what type of SNMP are you using, is it v2 or v3? If v3 what priv level and protocols are you using? On Fri, Feb 21, 2020 at 4:07 AM Peter Spichtig spi314@users.sourceforge.net wrote: Hello I`ve tried to collect Data from a C9300....
-
Hello I`ve tried to collect Data from a C9300. But i got an snmp Timeout. I tried all Version of Switch Miner. On older Switches, it works great. Sincerly, Peter
-
Switch Miner W32 Console 3.30 Released
-
Switch Miner 4.20 Released
-
Switch Miner 4.20 Release
-
-
-
Jon D. Irish posted a comment on ticket #10
Please consider porting to OSX as well.
-
SNMP3v - Add
-
Added in 4.10
-
Add SNMP v3 please!!
-
Added in 4.10
-
4.0 GUI and multiple switches
-
Fixed in 4.10
-
4.0 toolbar missing
-
SNMP version 3
-
Added in 4.10
-
Save file problems
-
Fixed in 4.10
-
Switch Miner 4.10 Released
-
-
-
Chuck Rock created ticket #6
Save file problems
-
Paul Miller created ticket #5
SNMP version 3
-
Hey Justin, if you do a search in the PC's registry for switch miner and delete the occurrences you find it will reset the GUI back. Will have to look to see why that happened. On Wed, Sep 26, 2018 at 9:32 AM Justin Forbes tbca@users.sourceforge.net wrote: [support-requests:#4] https://sourceforge.net/p/switchminer/support-requests/4/ 4.0 toolbar missing* Status: open Group: v1.0_(example) Created: Wed Sep 26, 2018 01:32 PM UTC by Justin Forbes Last Updated: Wed Sep 26, 2018 01:32 PM UTC Owner: nobody...
-
Justin Forbes created ticket #4
4.0 toolbar missing
-
Stunod7 posted a comment on ticket #4
Hi there! I'm hoping you still maintain this. I'm running into this issue as well. I've tried using older command line versions as well and I'm still encountering issues. Were you ever able to resolve this or make headway? I'd like to start using the app a bit more for initial network discoveries, as well as recommend it to others, but with it crashing while scanning it's a bit hard to do. Thank you!
-
boydreamer created ticket #13
Add SNMP v3 please!!
-
I am a fan of this application. Very helpful to me now! When can you add the SNMP 3v? Pleaseeee...
-
Leonard McCoy posted a comment on ticket #6
-
Incorrect IP when host changes VLAN
-
Tilmann Grossmann created ticket #5
VLAN Informations not filled
-
adalessa posted a comment on ticket #3
It seems I have an issue when I put multiple switches. I've attached the error that I get.
-
Yes -f in the command line version is read from a file. You can do the same thing in the GUI version by putting multiple devices in the switch or router box seperated by a comma, So if you have three switches you wanted to capture you would put switch1, switch2, switch2 in the switch box.
-
4.0 GUI and multiple switches
-
Database output
-
Search for MAC Address
-
Multiple SNMP
-
Version 4 supports multiple community strings
-
Brandon lund posted a comment on ticket #4
Here you go Brandon Lund Fox Business Systems & KansasNet 531 Ft Riley Blvd Manhattan,...
-
Thanks, can you do it once more and with the debug option snmp oid checked and u...
-
Here is the info from that switch and I have attached the log. Compiled Mon 11-Jun-07...
-
Thanks for reporting. Can you tell me what router model and software version causes...
-
Crash on scanning router.
-
Mack Lawrence created ticket #12
SNMP3v - Add
-
Switch Miner GUI 4.0 Released!
-
-
-
-
-
Luis posted a comment on ticket #11
Multiple SNMP Community
-
Multiple SNMP
-
JvRr posted a comment on discussion Help
Hi, We run this tool on a server with 2 network adapters. 1 adapter connected to...
-
Tim posted a comment on discussion Help
Hello, Just trying this out for the first time. I ran the exe just fine, it appears...
-
khrysRo created ticket #10
linux support (crossplataform support)
-
Lukasz Ziolkowski posted a comment on ticket #9
There is no L3 information read from PaloAlto firewalls.
-
L3 information from PaloAlto firewalls
-
Jon Buhagiar created ticket #8
DHCP Lookup of Network Name
-
-
1 >
