Cat 9300 running 16.9 code and CAT 2960C-8PC-L running 15.2 code do not display results. It goes through the discovery and snmpwalk, similiar to other host and then no data is returned in Miner. If you can check it out I would appreciate it.
Hey Christian, can you do these with a debug running? Go to View->Debug
Options and select analysis engine, snmp and snmp OID. Once it finishes you
will have a log file in your %APPDATA% folder in the directory switch miner
called sm.log. If you could email me the log file.
Status: open Group: v1.0 Created: Mon Jul 06, 2020 12:04 PM UTC by Christian Ledford Last Updated: Mon Jul 06, 2020 12:04 PM UTC Owner: Billy Yawn
Cat 9300 running 16.9 code and CAT 2960C-8PC-L running 15.2 code do not
display results. It goes through the discovery and snmpwalk, similiar to
other host and then no data is returned in Miner. If you can check it out I
would appreciate it.
Hey Christian, can you do these with a debug running? Go to View->Debug
Options and select analysis engine, snmp and snmp OID. Once it finishes you
will have a log file in your %APPDATA% folder in the directory switch miner
called sm.log. If you could email me the log file.
On Mon, Jul 6, 2020 at 8:04 AM Christian Ledford cyborgz@users.sourceforge.net wrote:
Related
Bugs:
#8Sorry it has taken so long to get this info....
From the switch, with debug snmp packets running, I can see it pull and get a NULL value.
Log Buffer (4096 bytes):
ry.13.1011 =
entPhysicalEntry.13.1012 =
entPhysicalEntry.13.1013 =
entPhysicalEntry.13.1015 =
entPhysicalEntry.13.1017 =
entPhysicalEntry.13.1018 =
entPhysicalEntry.14.1001 =
entPhysicalEntry.14.1002 =
entPhysicalEntry.14.1003 =
entPhysicalEntry.14.1004 =
entPhysicalEntry.14.1005 = 10001
entPhysicalEntry.14.1006 = 10002
entPhysicalEntry.14.1007 = 10003
entPhysicalEntry.14.1008 = 10004
entPhysicalEntry.14.1009 = 10005
entPhysicalEntry.14.1010 = 10006
entPhysicalEntry.14.1011 = 10007
entPhysicalEntry.14.1012 = 10008
entPhysicalEntry.14.1013 =
entPhysicalEntry.14.1015 =
entPhysicalEntry.14.1017 = 10102
entPhysicalEntry.14.1018 = 10101
entPhysicalEntry.15.1001 =
entPhysicalEntry.15.1002 =
entPhysicalEntry.15.1003 =
entPhysicalEntry.15.1004 =
entPhysicalEntry.15.1005 =
entPhysicalEntry.15.1006 =
entPhysicalEntry.15.1007 =
entPhysicalEntry.15.1008 =
Aug 9 21:51:43.448 CDT: SNMP: Get-bulk request, reqid 22404, nonrptr 0, maxreps 40
entPhysicalEntry.13 = NULL TYPE/VALUE
Aug 9 21:51:43.457 CDT: SNMP: Packet sent via UDP to 10.68.10.203
Aug 9 21:51:43.465 CDT: SNMP: Response, reqid 22404, errstat 0, erridx 0
entPhysicalEntry.13.1001 = WS-C2960C-8PC-L
entPhysicalEntry.13.1002 =
One other note the 2960C-8PC-L running IOS 15.0(2).SE works, but IOS 15.2(2).E6 fails.
Should be fixed in V4.21 just released.