Scribd
Upload
745 views3 pages

STIX Formula R4

This document contains a Monohull Stability Index (STIX) calculator that evaluates the stability of a vessel. It requests inputs like hull dimensions, displacement, sail area, and angles. It then calculates stability factors and provides a STIX value and design category based on the inputs. If the maximum displacement exceeds 115% of the MOC displacement, it notes that STIX must be calculated for both conditions and the lower value should be used.

Uploaded by

lavrik
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
745 views3 pages

STIX Formula R4

This document contains a Monohull Stability Index (STIX) calculator that evaluates the stability of a vessel. It requests inputs like hull dimensions, displacement, sail area, and angles. It then calculates stability factors and provides a STIX value and design category based on the inputs. If the maximum displacement exceeds 115% of the MOC displacement, it notes that STIX must be calculated for both conditions and the lower value should be used.

Uploaded by

lavrik
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

Monohull Stability Index (STIX) Calculator

Vessel Name: INPUTS Overall Hull Length Length Waterline Flooded Buoyancy (Y/N) Beam Waterline Beam Displacement MOC Displacement Max Height of CE above DWL Height of CLR below DWL Angle of vanishing stability Downflooding angle, (Afl) GZ at downflooding angle GZ at 90 degrees Sail Area Area to flooding (Agz) Area to AVS 13.72 12.55 N 4.02 4.27 13642 16620 9.12 0.65 137 105 0.4 0.58 120.11 68.18 75 m m m m kg kg m m deg deg m m sq.m m.deg m.deg TEST RESULTS Base Length Factor (LBS) FL Displacement Length Factor (FDL) FB Beam Displacement Factor (FBD) FR Knockdown Recovery Factor (FKR) Inversion Recovery Factor (FIR) Dynamic Stability Factor (FDS) Vaw (Only if Dfl<90) Wind Moment Factor (FWM) Downflooding Factor (FDF) Delta STIX DESIGN CATEGORY Wave height max Windspeed max.

Dmax/Dmoc

1.218296

>?

1.15

YES: We have to calculate for maximum displacem

If Dmax > 1,15 * Dmoc, then you have to calculate both STIX numbers, for MOC and maximum load condition, Of the two figures as the STIX number to be asigned to the boat. Enter full data for each of the two conditions.

12.940 1.033 1.012 1.012 1.898 1.085 1.085 3.612 1.194 1.194 1.176 1.176 1.164 1.164 0.000 Not Applicable 1.000 1.000 1.167 0 52.274 A 7 metres Force 10

e for maximum displacement

maximum load condition, and use the lower ach of the two conditions.

0 Not Applicable Applicable

YES: We have to calculate for maximum displacement NO: We choose the STIX value calculated with Dmoc

You might also like