Scribd
Upload
272 views1 page

SolidWorks 2010 Crack Guide

This document provides instructions for cracking and installing a pirated version of Solidworks 2010 on Windows 7 x64. It details extracting files, disabling security programs, installing with a serial number, applying various cracks to specific folders, and starting Solidworks after installation is complete. Cracks are applied to folders like C:\Program Files (x86)\SolidWorks Corp and C:\Program Files\SolidWorks Corp. The instructions warn not to start Solidworks until all cracks are applied.

Uploaded by

dusan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
272 views1 page

SolidWorks 2010 Crack Guide

This document provides instructions for cracking and installing a pirated version of Solidworks 2010 on Windows 7 x64. It details extracting files, disabling security programs, installing with a serial number, applying various cracks to specific folders, and starting Solidworks after installation is complete. Cracks are applied to folders like C:\Program Files (x86)\SolidWorks Corp and C:\Program Files\SolidWorks Corp. The instructions warn not to start Solidworks until all cracks are applied.

Uploaded by

dusan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd

0. Extract the sw2k10sp0.0_cracks.rar file 1. I deleted all previous versions of Solidworks, including all folders 2.

Disconnect from internet and disable anti virus program 3. Open the contents of the .iso and go to the sldim folder then go open the sld im application 4. Install the product with the serial number (I used the first one in the sw201 0_SolidSQUAD file). If it says that you cant install it or you need to be connec ted to the internet just hit "Cancel" or "Okay" to continue and it should start the installation. 5. After its installed DO NOT START SOLIDWORKS!!!!!! I believe this will ruin th e crack and you will have to reinstall it or only use the trial version. 6. Apply the cracks. Go to the folders that appeared after extracting the sw2k10 sp0.0_cracks file. Open each folder and it has instructions where to put it. For Windows 7 x64 some of the directories you have to paste the cracks in are locat ed at C:Program Files (x86)SolidWorks Corp and some are in C:Program FilesSolidW orks Corp (See below for more details).For the Solidworks Folder crack it says y ou need to install it with a different serial. I didnt and it still worked, so i f its not working maybe use that. 8. After all this start up Solidworks and it should work. You can reconnect your internet and virus protector afterward. RedMan21 as 2011-01-23 02:20 CET: I got it to work on Windows 7 Ultimate x64 (so far) Cracks location (this is what I did): edrawings: C:Program Files (x86)SolidWorks CorpSolidWorks eDrawings Photoview: C:Program Files (x86)SolidWorks CorpPhotoView 360 Solidworks: C:Program FilesSolidWorks CorpSolidWorks Simulation: C:Program FilesSolidWorks CorpSolidWorksSimulationLicensesetupi386 ___________ SW Explorer*: C:Program FilesSolidWorks CorpSolidWorks Explorer *I think the SW Explorer should go in: C:Program Files (x86)SolidWorks CorpSolid Works Explorersetupi386 but the one I previously mentioned worked for me

***** C:Program Files (x86)SolidWorks CorpSolidWorks ExplorerSolidWorks Explorer 2010 ***** (win64) ___________ If yours doesnt work Im sorry. I myself have gone through many Solidworks versio ns. It could just be your hardware or something you cant control. Try other vers ions, one should work. BTW Windows 7 is only compatible with 2010 or newer unless you run it in xp comp atibility mode or something tricky. Good luck!

You might also like