Scribd
Upload
61 views1 page

Thickness, Min Process In. MM Gtaw 1/8 3 Smaw 3/16 5 Gmaw 1/4 6 Fcaw-S 1/4 6 Fcaw-G 3/8 10 SAW 3/8 10

This document lists various welding processes and their minimum thickness requirements in both inches and millimeters. Gas tungsten arc welding has the lowest minimum thickness of 1/8 inches (3 mm), while flux cored arc welding-gas and submerged arc welding have higher minimum thicknesses of 3/8 inches (10 mm). It also notes some common welding acronyms and mentions that postweld heat treatment may not always be practical.

Uploaded by

TemesgenAbiy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
61 views1 page

Thickness, Min Process In. MM Gtaw 1/8 3 Smaw 3/16 5 Gmaw 1/4 6 Fcaw-S 1/4 6 Fcaw-G 3/8 10 SAW 3/8 10

This document lists various welding processes and their minimum thickness requirements in both inches and millimeters. Gas tungsten arc welding has the lowest minimum thickness of 1/8 inches (3 mm), while flux cored arc welding-gas and submerged arc welding have higher minimum thicknesses of 3/8 inches (10 mm). It also notes some common welding acronyms and mentions that postweld heat treatment may not always be practical.

Uploaded by

TemesgenAbiy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

Thickness, min

Process
in.
mm
GTAW
1/8
3
SMAW
3/16
5
GMAW
1/4
6
FCAW-S
1/4
6
FCAW-G
3/8
10
SAW
3/8
10
Submerged arc welding (SAW)
gas metal arc welding (GMAW)
flux cored arc welding (FCAW)
gas tungsten arc welding (GTAW)
Shielded Metal Arc Welding(SMAW )
Alternatively, when it is impractical to
postweld heat treat (PWHT)

You might also like