[Link]| write@theprofessionalwriters.
com| +91-
Professional Engineer
Summary Report
Name
PROFESSIONAL ENGINEER
Summary Statement
Competency Element
A brief summary of how you have
applied the element
Paragraph in the career
episode(s) where the element is
addressed
PE1 KNOWLEDGE BASE
Interest and expertise in IC design
and using the Cadence tool.
Classification of the development
process Develop a user friendly
and faster self service
PE1.1
Knowledge of science
and engineering
fundamentals
PE1.2
In-depth technical
competence in
at least one
engineering
discipline
PE1.3
Techniques and
resources
Engineers
Australia
C.E.1.2
CE 2.5
Analyzing the callers demands and CE 2.9,CE 2.17
service requests
Gather required information to
understanding the Process flow of
the application. Understanding the
requirements of SCADA
CE 3.1
Design a 4 Bit Ripple Carry Adder
using NORA logic which is one of
the prominent low power design
technique for digital circuits
C.E.1.2, C.E.1.4
Identification of interfacing
problems (hardware and software)
Evaluating the Remote AC
Traction power system
CE 2.12
Implemented 4 bit Ripple Carry
Adder with a low power design
technique
C.E. 1.4, C.E. 1.5
Whole process of design of an
IVRS into two sections namely
C.E. 2.5
CE 3.2
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
Paragraph in the career
episode(s) where the element is
addressed
1. Hardware section
2. Software section
The three parts Host system,
Communication Interfaces and
Railway Traction Remote
Terminal Unit (RTU).
C.E. 3.9
To overcome disadvantages
implemented faster and smaller
logic gates
C.E. 1.2, C.E. 1.4
Procedures in respect of health,
quality, safety
CE 2.10
Knowledge of testing and Testing
and involved in various activities
C.E. 3.7, C.E. 3.3
By careful observation and by
guidelines of the project
supervisor I reduced one transistor
from each latch.
C.E. 1.11
Encountered technical difficulties
in software support.
CE 2.12
Necessary measures for the proper
CE 2.11
PE1.4
General Knowledge
PE2 ENGINEERING ABILITY
PE2.1
Ability to undertake
problem
identification,
formulation, and
solution
Engineers
Australia
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
A brief summary of how you have
applied the element
Competency Element
Paragraph in the career
episode(s) where the element is
addressed
functioning of micro controller
.
CE 3.5
Validating the process control
Simulating and analyzing the
results of the design.
CE 3.6
Analytical in the formulation and
solutions of problems
PE2.2
Understanding of
social, cultural,
global, and
environmental
responsibilities
and the need to
employ
principles of
sustainable
development
PE2.3
Ability to utilise a
Engineers
Australia
Low power circuits reduce the cost C.E. 1.8
of the chip and attract customer to
use the technology which plays a
vital role in social and economical
environment.
Knowledge about the various
departments, mode of working .
CE 2.17
Establishment of coordination
between the different teams
CE 2.15
Understand the basic RTU
operations and also verify the
specifications and its reliable
performance.
CE 3.6
Design each block very carefully
in terms of low power.
Technical factors which can lead
to failure
C.E. 1.8 ,C.E. 1.9
CE 2.8, CE 2.9
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
Paragraph in the career
episode(s) where the element is
addressed
CE 2.9
Limitations of IVRS
CE 2.10
Resources responsible to support
the IVRS
systems
approach to
complex
problems and to
design and
operational
Focus was to discover all the
problems identified which
undergoing the phases in testing.
Design a 4 Bit Ripple Carry
C.E. 3.7
Connection between the
telephone line and ring detector
CE 2.7
IVRS in internet applications
CE 2.9
PE2.4
Development of a visual basic
program for transmission of data
CE 2.7
Proficiency in
engineering
design
Evaluation of the product and the
process through a control plan.
CE 3.15
Identification of various critical
parameters that exist in the
Engineering work as a team, plan,
conduct good meetings, manage
details, gather useful data, analyze
the data, communicate the results
and implementing changes.
Engineers
Australia
C.E 1.6
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
Paragraph in the career
episode(s) where the element is
addressed
The assigned project was
successfully implemented by me.
C.E.1.12
PE2.5
Usage of audio amplifier as a
buffer
CE 2.7, CE 2.8
Ability to conduct an
engineering
project
In depth analysis of RTU
CE 3.9
Developing a product with good
quality values
CE 3.10
Done product planning
,implementation distributing work
business environment
C.E.1.11,C.E.1.12
Organizational goals, Quality and
Customer satisfaction
CE 2.11
Benefits of product planning to the
final customer
CE 2.14
Achieved the organizational goals
for Quality product
CE 3.8
PE2.6
Understanding of the
business
environment
Benefits of product planning
PE3 PROFESSIONAL
ATTRIBUTES
PE3.1
Discussed with my project
supervisor about process variation,
time to market, fabricate the chip
C.E.1.11
Ability to
communicate
effectively, with
the engineering
team and with
the community
Assigned a specific job and
responsibilities
CE 2.15,CE 2.14
Engineers
Australia
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
Effectively implement various
suggestions and ideas of team
members for the successful
completion of the project
at large
PE3.2
Ability to manage
information and
documentation
PE3.3
Capacity for
creativity and
innovation
Paragraph in the career
episode(s) where the element is
addressed
CE 3.11
CE 3.15
Receive feedback from the team
members for further improvements
in the way the project was being
carried out.
Had written the whole project
report
C.E.1.12
Utilization of my writing skills
CE 2.15
Synchronization between the two
involved teams.
CE 2.12
CE 2.8
Supporting the team members in
integration
Identified, documented and
communicated changes of Control
plans
CE 3.13
Circuit diagram based on low
power technique
C.E. 1.4. ,C.E. 1.6
Programming of micro controller
CE 2.11
Best features in both of
communication and software these
streams.
CE 2.3
CE 2.2
Introduction of IVRS in mobile
systems
.
Engineers
Australia
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
Enhance quality planning
according to the requirement.
Paragraph in the career
episode(s) where the element is
addressed
CE 3.7
CE3.3
Achievement of organizational
goals through initiatives taken.
PE3.4
Discussion with project guide and
implementing the project
successfully
Responsibilities in
telecommunications
C.E. 1.10
The policy of our organization
CE 2.3
Understanding of
Efficient design of Interactive
professional and voice response system,
ethical
responsibilities,
and commitment Ability to implement
to them
improvements in the discharge of
CE 2.1
CE 2.4
CE 3.8
professional duties
PE3.5
Ability to function
effectively as an
individual and in
multidisciplinary
and
multicultural
teams, as a
Engineers
Australia
Organizational benefiting through
technical accomplishment
CE 3.4
Ability to meet and solve issues
C.E.1.9 ,C.E. 1.16
Coordination of work between the
development team and quality
assurance team
CE 2.4
My duties in development process
CE 2.7
Ability to coordinate with the
other members of the team for the
professional execution of the
CE 3.11
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
team leader or
manager as well
as an effective
team member
A brief summary of how you have
applied the element
Paragraph in the career
episode(s) where the element is
addressed
project
Ability to utilize the qualities of
the team members for the success
of the project.
CE 3.12
Knowledge of MOSFET, MOS
transistors etc
C.E. 1.6, C.E. 1.5
PE3.6
Meeting the demands of its
customers
CE 2.17
Capacity for lifelong
learning and
professional
development
Applications of IVRS in other
areas
CE 2.2
Involved in the analysis of
determining various errors of a
unit
CE 3.4
Can handle the project alone and
dedicatedly
C.E. 1.11, C.E. 1.12
Infrastructure for rapid growth in
the organization
CE 2.1
PE3.7
Professional
Attitudes
CE 2.4
Forming a multidiscipline team
CE 2.9
Limitations of IVRS.
Ability to work in teams.
CE 3.5
Able to support team goals with
the organizational goals.
CE 3.14
Process flow knowledge involved
Engineers
Australia
[Link]| write@[Link]| +91-
Professional Engineer
Summary Report
Name
Competency Element
A brief summary of how you have
applied the element
in the manufacturing process of
automotive components.
Engineers
Australia
Paragraph in the career
episode(s) where the element is
addressed
CE 3.5
