Scribd
Upload
482 views5 pages

Opening and Closing Device: TP201 Festo Didactic

The document describes a circuit to open and close a valve using a pushbutton switch. Pressing the switch energizes a solenoid valve that actuates a double-acting cylinder to open the valve. Releasing the switch de-energizes the solenoid valve, closing the valve. Diagrams show the pneumatic and electrical circuits, components include a cylinder, solenoid valve, and switch. The circuit uses pressurized air and electricity to mechanically open and close the valve.

Uploaded by

Macarena Dominguez
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
482 views5 pages

Opening and Closing Device: TP201 Festo Didactic

The document describes a circuit to open and close a valve using a pushbutton switch. Pressing the switch energizes a solenoid valve that actuates a double-acting cylinder to open the valve. Releasing the switch de-energizes the solenoid valve, closing the valve. Diagrams show the pneumatic and electrical circuits, components include a cylinder, solenoid valve, and switch. The circuit uses pressurized air and electricity to mechanically open and close the valve.

Uploaded by

Macarena Dominguez
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

A-5

Exercise 2

Electropneumatics Subject

Opening and closing device Title

„ Direct actuation of a double-acting cylinder Training aim

„ Drawing the pneumatic and electric circuit diagram Problem


„ Carrying out the pneumatic and electric circuit construction
„ Checking the sequence of the circuit

TP201 • Festo Didactic


A-6
Exercise 2

Problem description Using a special device, the valve in a pipe line is to be opened and
closed.
The valve is opened by pressing the pushbutton switch. When the
pushbutton is released the valve is closed.

Fig. 2/1: Positional sketch

TP201 • Festo Didactic


C-7
Solution 2

Opening and closing device

Fig. 2/2:
Circuit diagram, pneumatic

Representation without manifold

Fig. 2/3:
Circuit diagram, electrical

TP201 • Festo Didactic


C-8
Solution 2

Solution description By pressing the pushbutton switch S1 the electric circuit for the solenoid
coil 1Y is closed and the 5/2-way solenoid valve is actuated. The piston
rod of the double-acting cylinder advances to the forward end position.
After releasing the pushbutton switch S1 the electric circuit for the sole-
noid coil 1Y is opened and the 5/2-way solenoid valve is switched back
to its initial position. The piston rod returns to its retracted end position.

Fig. 2/4:
Circuit design, pneumatic

p = 400 ... 600 kPa (4 ... 6 bar)

TP201 • Festo Didactic


C-9
Solution 2

Quantity Description Components list

1 Double-acting cylinder
1 Service unit with on-off valve
1 Manifold
1 5/2-way single solenoid valve

Fig. 2/5:
Circuit design, electrical

Quantity Description Components list

1 Signal input plate, electrical


1 Indicator and distributor plate, electrical
1 Cabel set, universal
1 Electrical power supply unit, 24 V

TP201 • Festo Didactic

You might also like