Element Selection in Abaqus
[Link] | Dassault Systmes
R 6.12
About this Course
Course objectives
Upon completion of this course you will be able to: Understand the distinguishing characteristics of the wide range of continuum and structural elements available in Abaqus for stress analyses Understand modeling features that may cause certain types of elements to behave poorly Choose appropriate element types for different applications including the effects of fully or nearly incompressible material behavior, contact, bending, etc.
[Link] | Dassault Systmes
Targeted audience
Simulation Analysts
Prerequisites
This course is recommended for engineers with experience using Abaqus
2 days
Day 1
Lecture 1 Solid Elements in Abaqus
Lecture 2
Lecture 3 Demo 1
[Link] | Dassault Systmes
Cylindrical and Infinite Elements
Solid Element Integration, Hourglassing, and Incompressible Material Behavior Hourglass control Plane Strain Elements Key Properties of Solid Elements Plane Stress Elements Modeling Bending and Stress Concentrations with Solid Elements 3-D Solid Elements
Workshop 1 Lecture 4 Workshop 2 Lecture 5 Workshop 3
Day 2
Lecture 6 Structural Elements in Abaqus
Lecture 7
Workshop 4 Lecture 8
[Link] | Dassault Systmes
Conventional Shell Elements
Shell Elements Continuum Shell Elements Beam and Frame Elements Beam Elements
Lecture 9 Workshop 5
Legal Notices
The Abaqus Software described in this documentation is available only under license from Dassault Systmes and its subsidiary and may be used or reproduced only in accordance with the terms of such license. This documentation and the software described in this documentation are subject to change without prior notice. Dassault Systmes and its subsidiaries shall not be responsible for the consequences of any errors or omissions that may appear in this documentation. No part of this documentation may be reproduced or distributed in any form without prior written permission of Dassault Systmes or its subsidiary. Dassault Systmes, 2012. Printed in the United States of America Abaqus, the 3DS logo, SIMULIA and CATIA are trademarks or registered trademarks of Dassault Systmes or its subsidiaries in the US and/or other countries. Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal Notices in the Abaqus 6.12 Release Notes and the notices at: [Link]
[Link] | Dassault Systmes
Revision Status
Lecture 1 Lecture 2 Lecture 3 Lecture 4
[Link] | Dassault Systmes
5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12 5/12
Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12 Updated for 6.12
Lecture 5 Lecture 6 Lecture 7 Lecture 8 Lecture 9 Demo 1 Workshop 1 Workshop 2 Workshop 3 Workshop 4 Workshop 5
Lesson 1: Solid Elements in Abaqus
The following topics are covered in this lesson.
L1.1
Lesson content: Solid Elements in Abaqus
[Link] | Dassault Systmes
90 minutes
Solid Elements in Abaqus
L1.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. 2. 3. 4. 5. 6.
Introduction Solid Elements in Abaqus Planar Elements Generalized Plane Strain Elements (S) Axisymmetric Elements Axisymmetric Elements with Nonaxisymmetric Response (S) 7. Axisymmetric Elements with Twist (S) 8. Three-dimensional Elements
(S) Abaqus/Standard only
Lesson 2: Cylindrical and Infinite Elements
The following topics are covered in this lesson.
L2.1
Lesson content: Cylindrical and Infinite Elements
[Link] | Dassault Systmes
60 minutes
Cylindrical and Infinite Elements
L2.2
Here are the steps to be followed:
1. Cylindrical Elements (S) 2. Infinite Elements
[Link] | Dassault Systmes
(S) Abaqus/Standard only
Lesson 3: Solid Element Integration, Hourglassing, and Incompressible Material Behavior
L3.1
The following topics are covered in this lesson.
[Link] | Dassault Systmes
Lesson content: Solid Element Integration, Hourglassing, and Incompressible Material Behavior Workshop Preliminaries Demonstration 1: Hourglass control Workshop 1: Plane Strain Elements (IA) Workshop 1: Plane Strain Elements (KW)
Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one.
90 minutes
Solid Element Integration, Hourglassing, and Incompressible Material Behavior
L3.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. 2. 3. 4. 5. 6.
Numerical Integration Hourglassing and Hourglass Control Incompressible Material Behavior The B Approach Hybrid (Mixed) Elements (S) Demonstration
(S) Abaqus/Standard only
Lesson 4: Key Properties of Solid Elements
The following topics are covered in this lesson.
L4.1
Lesson content: Key Properties of Solid Elements Workshop 2: Plane Stress Elements (IA) Workshop 2: Plane Stress Elements (KW)
[Link] | Dassault Systmes
Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one.
60 minutes
Key Properties of Solid Elements
L4.2
Here are the steps to be followed:
1. 2.
[Link] | Dassault Systmes
3. 4. 5. 6. 7. 8. 9.
Key Properties of First-Order Triangles and Tetrahedra Key Properties of Fully Integrated FirstOrder Quads and Bricks Key Properties of Reduced-Integration First-Order Quads and Bricks Key Properties of Second-Order Triangles and Tetrahedra Key Properties of Fully Integrated SecondOrder Quads and Bricks (S) Key Properties of Reduced-Integration Second-Order Quads and Bricks (S) Using Second-Order Bricks in Contact Problems (S) Quads/Bricks or Triangles/Tetrahedra? First- or Second-Order Elements?
(S) Abaqus/Standard only
Lesson 5: Modeling Bending and Stress Concentrations with Solid Elements
The following topics are covered in this lesson.
L5.1
Lesson content: Modeling Bending and Stress Concentrations with Solid Elements Workshop 3: 3-D Solid Elements (IA) Workshop 3: 3-D Solid Elements (KW)
[Link] | Dassault Systmes
Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one.
60 minutes
Modeling Bending and Stress Concentrations with Solid Elements
L5.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. Bending Problems and Shear Locking 2. Incompatible Mode Elements 3. Summary: Modeling Bending Using Continuum Elements 4. Stress Concentrations 5. Second-order Accuracy (E) 6. Solid Element Selection Summary 7. Abaqus/Standard vs. Abaqus/Explicit 8. Continuum vs. Structural Elements
(E) Abaqus/Explicit only
Lesson 6: Structural Elements in Abaqus
The following topics are covered in this lesson.
L6.1
Lesson content: Structural Elements in Abaqus
[Link] | Dassault Systmes
60 minutes
Structural Elements in Abaqus
L6.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. 2. 3. 4.
Overview Introduction Structural Elements in Abaqus Classical Formulation of Thin Shells and Slender Beams (S) 5. Shear Flexible Formulation of Shells and Beams 6. Thickness Changes 7. Mode-based and Implicit Dynamics (S)
(S) Abaqus/Standard only
Lesson 7: Conventional Shell Elements
The following topics are covered in this lesson.
L7.1
Lesson content: Conventional Shell Elements Workshop 4: Shell Elements (IA) Workshop 4: Shell Elements (KW)
[Link] | Dassault Systmes
Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one.
2 hours
Conventional Shell Elements
L7.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. Conventional vs. Continuum Shell Elements 2. Defining Conventional Shells 3. Conventional Shell Element Behavior 4. Conventional shell Element Types 5. Comparison Studies 6. Axisymmetric shell elements 7. Viewing Shell Element Output
Lesson 8: Continuum Shell Elements
The following topics are covered in this lesson.
L8.1
Lesson content: Continuum Shell Elements
[Link] | Dassault Systmes
60 minutes
Continuum Shell Elements
L8.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. Introduction to Continuum Shell Elements 2. Defining the Thickness Direction for Continuum Shell Elements 3. Continuum Shell Modeling 4. Continuum Shell Example 5. Shell Element Selection Summary 6. Abaqus/CAE Demonstration: Controlling the Mesh Stack Direction
Lesson 9: Beam and Frame Elements
The following topics are covered in this lesson.
L9.1
Lesson content: Beam and Frame Elements Workshop 5: Beam Elements (IA) Workshop 5: Beam Elements (KW)
[Link] | Dassault Systmes
Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one.
2 hours
Beam and Frame Elements
L9.2
Here are the steps to be followed:
[Link] | Dassault Systmes
1. 2. 3. 4. 5. 6.
Beam Elements Defining Beam Elements Viewing Beam Element Output Meshed Beam Cross Sections (S) Beam Element Selection Summary Frame Elements (S)
(S) Abaqus/Standard only
