Welcome to use home media gateway
Password: (admin)
Login success!
MG6002A(TX)>en
Password: (telmex)
MG6002A(TX)#set ip
WAN
->**IP Address[[Link]]: [Link] (ip telefonia)
->**Net Mask[[Link]]: [Link] (mask)
LAN
->**IP Address[[Link]]:
->**Net Mask[[Link]]:
->Whether Use the Default Gateway, 'yes' or 'no'[no]: y
->**Default Gateway Address[[Link]]: [Link] (default ip)
***Taking effect must restart the system after configurations be saved!***
Are you sure to change the configurations? 'yes' or 'no'[no]: y
MG6002A(TX)#set vlan
Do you want to enable VLAN?'yes' or 'no'[yes]:y
Do you want to Disable Data Vlan Tag?'yes' or 'no'[no]:n
Please input Data VLAN Vid [0050]:50
Please input Voice VLAN Vid [0020]:20
MG6002A(TX)#set tos
->**Please enter the MGCP packet's TOS value(0~255)[160]:160
->Please enter the voice packet's TOS value(0~255)[160]:160
Are you sure change configuration? 'yes' or 'no'[no]: y
MG6002A(TX)#set mgcp
->**Gateway Name[[Link]]: LIMGA02mg8100960 (sot)
->**Gateway Port(Default port is 2427, and not within RTP port range)[2427]:
->**RTP Port From(Default:3000, must more than 1024 and be even)[3000]:
->**Calling Agent Address:[[Link]]: [Link]
->**Calling Agent Port(Default port is 2727)[2727]:
->**Use Backup calling agent?'yes' or 'no'[no]: y
->**Backup Calling Agent Address[[Link]]: [Link]
->**Backup Calling Agent Port(Default Port is 2727)[2727]:
->**Mode of Port Register(0-Single Match, 1-All Match)[1]: 1
->**Transaction handle mode(0-step, 1-loop)[1]: 1
->Mode of Number Transmit(0-single digital, 1-String)[0]: 1
***Taking effect must restart the system after configurations be saved!***
Are you sure? 'yes' or 'no'[no]: y
MG6002A(TX)#set codec
-> Batch All Endpoint Codec'yes' or 'no'[yes]:
Start to Configure All Endpoint by Batch mode:
->Enable G.711 ALaw Codec? 'yes' or 'no'[yes]:
->Enable G.723.1 Codec? 'yes' or 'no'[yes]: n
->Enable G.729 Codec? 'yes' or 'no'[yes]:
->Enable G.711 Mu Law Codec? 'yes' or 'no'[no]:
->Please Select Priority Voice Codec algorithm(0-G.729, 1-G.711 A Law)[1]: 0
->Please Select Fax Mode(0-Transparent, 1-T.38)[1]:1
->Please Select Modem Codec algorithm(0-G.711 A Law,1-G.711Mu Law)[1]: 0
Are you sure change configuration? 'yes' or 'no'[no]: y
MG6002A(TX)#set pots
->Configuration Port Information, Please Input Port Number[1]: (enter)
->Port Information is[6282300]: 6372418
Continue configuration? 'yes' or 'no'[yes]: y
->Configuration Port Information, Please Input Port Number[2]: (enter)
->Port Information is[]: 6372419
Continue configuration? 'yes' or 'no'[yes]: n
MG6002A(TX)#save
Are you sure save current configuration? 'yes' or 'no'[no]: y
Operate Successfully!
MG6002A(TX)#set ethernetport
Do you want to enable LAN Port Auto Negotiation?'yes' or 'no'[no]:n
Select LAN Speed(0-10Mbps 1-100Mbps)[1]:1
Select LAN Duplex Mode(0-Half 1-Full)[1]: 1
EN ESTA PARTE DE LA CONFIGURACIN EL IAD GAOKE SE REINICIA
ES NORMAL NO HAY NINGUN PROBLEMA SE VUELVE A INGRESAR Y
SE CONTINUA CON LA CONFIG.
Welcome to use home media gateway
Password: (admin)
Login success!
MG6002A(TX)>en
Password: (telmex)
MG6002A(TX)#set ethernetport
Do you want to enable LAN Port Auto Negotiation?'yes' or 'no'[no]:n
Select LAN Speed(0-10Mbps 1-100Mbps)[1]:1
Select LAN Duplex Mode(0-Half 1-Full)[1]:1
Do you want to enable WAN Port Auto Negotiation?'yes' or 'no'[no]:n
Select WAN Speed(0-10Mbps 1-100Mbps)[1]:1
Select WAN Duplex Mode(0-Half 1-Full)[1]:1
MG6002A(TX)#hostname PAYASITO
Set Hostname Successfully!!
PAYASITO#save
Are you sure save current configuration? 'yes' or 'no'[no]: y
Operate Successfully!
PAYASITO#reset
Are you sure reset device? 'yes' or 'no'[no]: y
