0% found this document useful (0 votes)

69 views814 pages

Parameter Reference

Parameter reference

Uploaded by

kikirn

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

69 views814 pages

Parameter Reference

Parameter reference

Uploaded by

kikirn

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

259352859.

xls

RNC
V200R009

BTS3900-BTS3900A-DBS3900 WCDMA
V200R011C00SPC110 Parameter Reference

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance,
headquarters.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base

Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:
Email:

[Link]
support@[Link]

Copyright Huawei Technologies Co., Ltd. 2009. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of H

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this

02/04/2015

1814

[Link]

MA
erence

d service. For any assistance, please contact our local office or company

out prior written consent of Huawei Technologies Co., Ltd.

spective holders.

made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in th

02/04/2015

2814

[Link]

nd recommendations in this document do not constitute the warranty of any kind, express or implied.

02/04/2015

3814

[Link]

Purpose

This describes NodeB parameters, including the meaning, values, and usage of NodeB paramete

Version
The product version related to this document is: V200R011C00SPC110

Intended Audience
Network planners
Field engineers
System engineers
Shift operators

Organization
Each parameter is described in the following aspects.
Description
Parameter ID
Parameter Name
NE
MML Command
Description
Value Type
GUI Value Range
Actual Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Access

02/04/2015

4814

[Link]

Service Interrupted During Modification

Interruption Scope
Interruption Duration (Min)
Caution
Validation of Modification
Impact on Radio Network Performance
Introduced in Version
Attribute

02/04/2015

5814

[Link]

, including the meaning, values, and usage of NodeB parameters.

s document is: V200R011C00SPC110

e following aspects.
Remarks
A simple string for uniquely identifying a parameter
The full name of the parameter
Net Elements which the parameter is set
All the commands that use the parameter; optional/mandatory attribute of the
parameter in each command
The definition, function, and the reference protocol of the parameter
The data type of parameter value: integer, enumeration, and so on
The value range on the MML interface; the definition and the applied
situations for enumeration values
The actual value. For example, if the GUI value is 0, the actual value is OFF.
The unit of parameter value
The initial value specified by the system
Recommended values in different situations
The affected range upon modifying the value, such as RAB, IPPATH, CELL
The restriction and relation with other parameters, such as, the switches to
active the parameter and the value of related parameters
Whether this parameter is read/write,read only,or internal.

02/04/2015

6814

[Link]

Modifying the parameters leads to service interruption?

The scope where the services are interrupted
The approximate duration of service interruption, in the unit of minute
Cautions to be taken during the modification
The way that you can take it effect.
Impact on Radio Network Performance
The version that the var appear firstly.
Whether this parameter is a radio parameter,a transport parameter,or an
equipment parameter.

02/04/2015

7814

[Link]

02/04/2015

8814

[Link]

02/04/2015

9814

Parameter ID

Parameter Name

MML Command

AC Upper Limit(V)

NodeB SET ACDCVLIMIT(Optional)

ACVLL

AC Lower Limit(V)

NodeB SET ACDCVLIMIT(Optional)

BEAR

Bear Type

NodeB ADD OMCH(Mandatory)

BPT

BootpTime(minute) NodeB SET BOOTPSWITCH(Optional)

AER

Tilt Alarm Error

NodeB SET TILTAER(Mandatory)
Range(0.1 degree)

AGTHRESHO
AG Threshold
LD

NodeB SET MACEPARA(Optional)

SET ALMSHLD(Mandatory)
ADD OBJALMSHLD(Mandatory)

AID

Alarm ID

NodeB

AIDST

Alarm ID Select
Type

NodeB ADD OBJALMSHLD(Mandatory)

ALMID

Alarm ID

NodeB SET ALMPORT

BRT

Binding Route

NodeB ADD OMCH(Optional)

ANT1CN

Cabinet No. of
NodeB ADD SEC(Optional)
Antenna Channel1

ANT1N

Antenna Channel1
NodeB ADD SEC(Mandatory)
No.

ANT1N

Antenna No. of
Power Amplifier1

ANT1SRN

Subrack No. of
NodeB ADD SEC(Mandatory)
Antenna Channel1

ANT2CN

Cabinet No. of
NodeB ADD SEC(Optional)
Antenna Channel2

NodeB ADD LOCELL(Optional)

ANT2N

Antenna Channel2
NodeB ADD SEC(Mandatory)
No.

ANT2N

Antenna No. of
Power Amplifier2

ANT2SRN

Subrack No. of
NodeB ADD SEC(Mandatory)
Antenna Channel2

ANT3CN

Cabinet No. of
NodeB ADD SEC(Optional)
Antenna Channel3

NodeB ADD LOCELL(Optional)

ANT3N

Antenna Channel3
NodeB ADD SEC(Mandatory)
No.

ANT3SRN

Subrack No. of
NodeB ADD SEC(Mandatory)
Antenna Channel3

ANT4CN

Cabinet No. of
NodeB ADD SEC(Optional)
Antenna Channel4

ANT4N

Antenna Channel4
NodeB ADD SEC(Mandatory)
No.

ANT4SRN

Subrack No. of
NodeB ADD SEC(Mandatory)
Antenna Channel4

ANTM

Antenna Magnitude NodeB ADD SEC(Mandatory)

BER Threshold

NodeB SET BERTHRESHOLD(Optional)

AST

ALD(Antenna Line
Device) System
Type

NodeB SET ALDPWRSW(Mandatory)

Alarm Type

NodeB SET NEMUDBAV(Mandatory)

ATMODE

Auto Test Mode

NodeB SET BATATPA(Mandatory)

ATTEN

Rx Attenuation
Value(dB)

NodeB SET RXATTEN(Mandatory)

CCTM

Timer_CC(ms)

NodeB ADD SAALLNK(Optional)

AUTHMODE

Authentication
Mode

NodeB SET SSLAUTHMODE(Optional)

AUTOSW

Auto Touchoff
Switch

NodeB SET EMGLICENSE(Optional)

CLKM

Clock Mode

NodeB SET ALDDEV(Mandatory)

BASEID11

Base station ID

NodeB SET ALDDEV(Mandatory)

BASEID20

Base station ID

NodeB SET ALDDEV(Mandatory)

Battery Capacity

NodeB ADD BATTERY(Optional)

BCD

Boost-Charging
Duration

NodeB ADD BATTERY(Optional)

BCLC

Battery Current
NodeB ADD BATTERY(Optional)
Limiting Coefficient

Environment Mode NodeB ADD BATTERY(Mandatory)

TUL

Temperature alarm
NodeB ADD BATTERY(Optional)
Upper Limit

TLL

Temperature alarm
NodeB ADD BATTERY(Optional)
Lower Limit

BCVOL

SET
NodeB HSDPAFLOWCTRLPARA(Option
al)

Discard Rate

DSTIP

Destination IP
Address

NodeB ADD OMCH(Mandatory)

DSTMASK

Destination IP
Mask

NodeB ADD OMCH(Mandatory)

EBS

Excessive Burst
Size(kbit)

NodeB SET LR(Mandatory)

BEARING

Antenna Bearing

NodeB SET ALDDEV(Mandatory)

BFLG

Battery
Overtemperature
Shutdown Flag

NodeB SET HTPROTECT(Optional)

Backup Mode

NodeB ADD RRUCHAIN(Mandatory)

Sub Board No.

NodeB STR E1T1RTTST(Optional)

Enable Switch

NodeB SET CPSWITCH(Optional)

BRKPOS1

Break Position1

NodeB

SET
RRUCHAINBRKPOS(Mandatory)

BRKPOS2

Break Position2

NodeB

SET
RRUCHAINBRKPOS(Optional)

Enable Switch

NodeB

SET
DHCPRELAYSWITCH(Optional)

BSDF

Battery Shutdown
Flag

NodeB SET SDPA(Optional)

BSDV

Battery Shutdown
Voltage

NodeB SET SDPA(Optional)

FERAT

Frame Error Rate

AppearThreshold
of FE MAC Layer

NodeB SET ETHPORT(Optional)

Board Type

NodeB ADD BRD(Optional)

Board Type

NodeB ACT SOFTWARE(Mandatory)

BTEM

Battery Shutdown
Temperature.

NodeB SET HTPROTECT(Optional)

CARRIER

Carrier No.

NodeB SET RTWPINITADJ(Optional)

Scenario

FERDT

Frame Error Rate

DisappearThreshol NodeB SET ETHPORT(Optional)
d of FE MAC Layer

CCAEnableSta

Enable state of the

NodeB SET CERTFILE(Optional)
certificate chain

FLAG

Flag

FPMUXSWITC
FPMUX Switch
H

CertChain

NodeB

ADD ALD(Optional)
SET ALDPWRSW(Optional)

CASE

NodeB ADD OMCH(Optional)

NodeB SET FPMUX(Optional)

Name of the
NodeB SET CERTFILE(Mandatory)
certificate chain file

Condition for
Failure

IFT

Interface Type

NodeB ADD OMCH(Mandatory)

IMPEDANCE

Line
Impedance(ohm)

NodeB SET E1T1BEAR(Optional)

CLKSRC

Clock Source Type NodeB SET CLKMODE(Optional)

CLS

Sub Board Type

NodeB STR E1T1RTTST(Mandatory)

ADD SCTPLNK(Optional)
ADD SUBRACK(Optional)
ADD TREELNKPVC(Optional)
ADD TSCROSS(Optional)
ADD UNILNK(Optional)
ADD CFMMA(Optional)
ADD CFMMEP(Optional)
ADD ETHTRK(Optional)
ADD ETHTRKLNK(Optional)
ADD BFDSESSION(Optional)
SET ACDCVLIMIT(Optional)
SET ALDPWRSW(Optional)
SET ALMPORT(Optional)
SET ANTTILT(Optional)
SET BATATPA(Optional)
SET BATCTPA(Optional)
SET BCFCVOLTAGE(Optional)
SET CLKMODE(Optional)
SET HTPROTECT(Optional)
NodeB
SET IFOFFSET(Optional)
SET OUTPORT(Optional)
SET PWRSYSCFG(Optional)
SET CMUCFG(Optional)
SET RFDESPARAM(Optional)
SET RTWPINITADJ(Optional)
SET RXATTEN(Optional)
SET RXSW(Optional)
SET SASUDCLD(Optional)
SET SASUDCSW(Optional)
SET SASUGAIN(Optional)
SET SASUMODE(Optional)
SET SASUVSWRTHD(Optional)
SET SDPA(Optional)
SET SUBBRD(Optional)
SET TILTAER(Optional)
SET TMAGAIN(Optional)
SET TMAMODE(Optional)
SET TXSW(Optional)

Cabinet No.

CN1

Cabinet No. of
Power Amplifier1

NodeB ADD LOCELL(Optional)

CN2

Cabinet No. of
Power Amplifier2

NodeB ADD LOCELL(Optional)

CNB

Cabinet No. of
RRU Begin

ADD LOCELL(Optional)
NodeB ADD SEC(Optional)
ADD TXPAIR(Optional)

COUNT

Count

NodeB SET EMGLICENSE(Optional)

COVERTYPE

Cover Type

NodeB ADD SEC(Mandatory)

IP Address

NodeB SET LOCALIP(Mandatory)

Local IP Address

NodeB ADD OMCH(Mandatory)

CQIFA

CQI Filter Alpha

NodeB SET MACHSPARA(Optional)

CRL

Name of the cancel

NodeB SET CERTFILE(Mandatory)
list file

CRLEnableSta

Enable state of the

NodeB SET CERTFILE(Optional)
certificate chain
SET PWRSYSCFG(Mandatory)
SET CMUCFG(Mandatory)

Config State

NodeB
SET
NCMUCFG(Mandatory)

CSLSDF

Cold Start Load

Shutdown Flag

NodeB SET SDPA(Optional)

CSLSDT

Cold Start Load

Shutdown
Temperature

NodeB SET SDPA(Optional)

CTRLSW

CM Control enable
NodeB SET CMCTRLSW(Mandatory)
switch

CURRDA

Current DA

NodeB MOD CURRDA(Optional)

NodeB MOD CENTERDA(Optional)

DATE

Installation Date

NodeB MOD BATINDT(Optional)

DATE

Date

NodeB SET EMGLICENSE(Mandatory)

DAYS

Days

NodeB SET EMGLICENSE(Mandatory)

DBD

Dead band

NodeB SET HTCDPA(Optional)

DCID

Destination Cell ID NodeB MOD CMBGROUP(Mandatory)

DCID1

Destination Cell
ID1

NodeB ADD CMBGROUP(Mandatory)

DCID2

Destination Cell
ID2

NodeB ADD CMBGROUP(Optional)

DCLOAD

DC Load(20mA)

NodeB SET SASUDCLD(Mandatory)

DCSWITCH

DC Switch State

NodeB SET SASUDCSW(Mandatory)

DCVHL

DC Upper Limit

NodeB SET ACDCVLIMIT(Optional)

DCVLL

DC Lower Limit

NodeB SET ACDCVLIMIT(Optional)

DDSTM

Delayed Discharge
NodeB SET BATATPA(Optional)
Test Time(Day)

DEFPWRLVL

Default Power
Level

NodeB ADD LOCELL(Optional)

JNRSCGRP

Join Resource
Group

KATM

Timer_Keep_Alive(
NodeB ADD SAALLNK(Optional)
ms)

DEVTP

Device Type

NodeB

DEVTP

Device Type

NodeB SET SASUVSWRTHD(Optional)

DEVTP

Device Type

SET TILTAER(Mandatory)
NodeB SET TMAMODE(Optional)
SET ANTTILT(Mandatory)

DEVVER

AISG Protocl
Version

NodeB SET ALDDEV(Mandatory)

DFACHID

Destination FACH
Channel ID

NodeB MOD CMBGROUP(Mandatory)

NodeB ADD OMCH(Optional)

SET TMAGAIN(Optional)
ADD ALD(Mandatory)

DFACHID1

Destination FACH
Channel ID1

NodeB ADD CMBGROUP(Mandatory)

DFACHID2

Destination FACH
Channel ID2

NodeB ADD CMBGROUP(Optional)

LOCIP

Local IP Address

NodeB

SET
IPREMOTELOOP(Mandatory)

Desensitization
Intensity

NodeB

SET DESENS(Mandatory)
ADD LOCELL(Optional)

DSTPN

Destination Port
No.

NodeB ADD TREELNKPVC(Optional)

DSTPN

Destination Fraatm
NodeB ADD TREELNKPVC(Optional)
Link No.

DSTPN

Destination Port
No.

NodeB ADD TSCROSS(Mandatory)

DSTPT

Destination Port
Type

NodeB ADD TREELNKPVC(Mandatory)

MCR

Min Cell Rate

NodeB ADD OMCH(Mandatory)

DSTSBT

Destination
Subboard Type

NodeB ADD TREELNKPVC(Mandatory)

DSTSBT

Destination
Subboard Type

NodeB ADD TSCROSS(Mandatory)

DSTSN

Destination Slot
No.

NodeB

ADD TREELNKPVC(Mandatory)
ADD BACKE1T1(Mandatory)

DSTSN

Destination Slot
No.

NodeB ADD TSCROSS(Mandatory)

DSTSRN

Destination
Subrack No.

NodeB ADD TREELNKPVC(Mandatory)

MODE

Bearing Mode

NodeB SET E1T1BEAR(Optional)

NEXTHOP

Next Hop IP

NodeB ADD OMCH(Mandatory)

NRTM

Timer_No_Respon
NodeB ADD SAALLNK(Optional)
se(ms)

OMPRI

OM Priority

NodeB SET DIFPRI(Optional)

DYNCODESW

Dynamic Code
Switch

NodeB SET MACHSPARA(Optional)

EAGCHPCMO E-AGCH HPC

D
Mode

NodeB SET MACEPARA(Mandatory)

EAGCHPCPA E-AGCH HPC

RA
Parameters

NodeB SET MACEPARA(Optional)

EAGCHPOWE
E-AGCH Power
R

NodeB SET MACEPARA(Mandatory)

EAGCHPWRO E-AGCH Power

FFSET
Offset

NodeB SET MACEPARA(Mandatory)

PCR

NodeB ADD OMCH(Mandatory)

Peak Cell Rate

End Date

NodeB STR E1T1RTTST(Mandatory)

EDAY

End date

NodeB SET TZ(Mandatory)

EFF

Battery Charge
Efficiency

NodeB SET BATCTPA(Optional)

EFFECT

Effect Signal

NodeB SET LCPSW(Mandatory)

End date mode.

NodeB SET TZ(Mandatory)

EMONTH

End month

NodeB SET TZ(Mandatory)

ENCRYMODE

Transport
Encrypted Mode

NodeB SET FTPSCLT(Optional)

ENDV

End Voltage

NodeB SET BATCTPA(Optional)

PEERIP

Peer IP Address

NodeB ADD OMCH(Mandatory)

PEERMASK

Peer IP Mask

NodeB ADD OMCH(Mandatory)

End time

NodeB SET TZ(Mandatory)

End Time

NodeB STR E1T1RTTST(Mandatory)

EWEEK

End week

NodeB SET TZ(Mandatory)

EWSEQ

End week
sequence

NodeB SET TZ(Mandatory)

FCVOL

Float-charging
Voltage

NodeB SET BCFCVOLTAGE(Optional)

PEERUDPPO
Peer UDP Port
RT

PLRAT

PLR Appear
Threshold

NodeB

SET
IPREMOTELOOP(Mandatory)

NodeB SET PLRTHRESHOLD(Optional)

PLRDT

PLR Disappear
Threshold

NodeB SET PLRTHRESHOLD(Optional)

POLL

Timer_Poll(ms)

NodeB ADD SAALLNK(Optional)

FLAG

Enable Flag

NodeB SET CFGFILEENB(Mandatory)

FLG

NMPT Backup Flag NodeB SET MPTBKP(Mandatory)

FLR

RRU Floor

NodeB ADD RRU(Optional)

PREF

Route Preference

NodeB ADD OMCH(Optional)

PRIRULE

Priority Rule

NodeB SET DIFPRI(Optional)

RSCGRPID

Resource Group ID NodeB ADD OMCH(Mandatory)

Route Type

NodeB ADD OMCH(Optional)

RXBW

Rx
Bandwidth(kbps)

NodeB ADD RSCGRP(Mandatory)

SCR

Sustain Cell Rate

NodeB SET ALDDEV(Mandatory)

GAIN4

Antenna Gain

NodeB SET ALDDEV(Mandatory)

GPSCD

GPS Cable Delay

NodeB SET GPSDELAY(Mandatory)

HCN

Head Cabinet No.

NodeB ADD RRUCHAIN(Optional)

TTW

Two Tx Way

NodeB ADD LOCELL(Optional)

NodeB ADD OMCH(Mandatory)

SET TMAGAIN(Mandatory)
SET SASUGAIN(Mandatory)

HISPM

High Speed
Movement Mode

NodeB ADD LOCELL(Optional)

HLL

Humidity Lower
Limit

NodeB MOD NEMUTHLIMIT(Optional)

HORAD

Local Cell Inner

Handover Radius

NodeB ADD LOCELL(Optional)

HPN

Head Port No.

NodeB ADD RRUCHAIN(Mandatory)

HSN

Head Interface
Board Slot No.

NodeB ADD RRUCHAIN(Mandatory)

HSRN

Head Subrack No.

NodeB ADD RRUCHAIN(Optional)

HTCP

High Temperature
critical point

NodeB SET HTCDPA(Optional)

HTCT

Heater Close
Temperature

NodeB SET HTPA(Optional)

HTDO

High temperature
delta Tout

NodeB SET HTCDPA(Optional)

HTST

Heater Start
Temperatue

NodeB SET HTPA(Optional)

HUL

Humidity Upper
Limit

NodeB MOD NEMUTHLIMIT(Optional)

RRU Horizontal

NodeB ADD RRU(Optional)

Bearing Service
Type

NodeB ADD SAALLNK(Optional)

SUBFRAMELE Sub Frame Max

N
Length(byte)

NodeB SET FPMUX(Optional)

SWITCH

Hsdpa Switch

SET
NodeB HSDPAFLOWCTRLPARA(Option
al)

IFOFFSET

IF Offset

NodeB SET IFOFFSET(Mandatory)

Time Delay(5ms)

SET
NodeB HSDPAFLOWCTRLPARA(Option
al)

TIMER

Timer(ms)

NodeB SET FPMUX(Optional)

TLFRSWITCH TLFR SWITCH

NodeB SET TLFRSWITCH(Optional)

SET
STM1WORKMODE(Mandatory)

TXCLK

Tx Clock

NodeB

VCI

Bearing VCI

NodeB ADD OMCH(Mandatory)

INFNO

Interface No.

NodeB SET NEMUANLGIN(Mandatory)

VPI

Bearing VPI

NodeB ADD OMCH(Mandatory)

CBS

Committed Burst
Size(kbit)

NodeB SET LR(Mandatory)

INSTALLDATE Installation Date

NodeB SET ALDDEV(Mandatory)

INSTALLID

Installer's ID

NodeB SET ALDDEV(Mandatory)

ULCIR

Committed
Information
Ratekbps

NodeB SET LR(Mandatory)

DLCIR

Committed
Information
Ratekbps

NodeB SET LR(Mandatory)

DUPLEX

Duplex

NodeB SET ETHPORT(Optional)

NTP Server IP
Address

NodeB SET SNTPCLTPARA(Optional)

FTP Server IP

NodeB SET CHRSW

FRAME

Frame Structure

NodeB

FUNCTION

Function

NodeB SET LR(Optional)

SET
E1T1WORKMODE(Optional)

IPMODE

IP Clock Mode

NodeB SET CLKMODE(Optional)

INSTAG

Insert VLAN Tag

NodeB SET VLANCLASS(Optional)

Loopback Mode

NodeB SET E1T1LOP(Optional)

Loopback Mode

NodeB SET IPREMOTELOOP(Optional)

LFLG

Load
Overtemperature
Shutdown Flag

NodeB SET HTPROTECT(Optional)

LIMIT

Alarm Limit

NodeB

Lower Limit(V)

NodeB SET NEMUINVLIMIT(Optional)

Lower Alarm Occur

NodeB SET ALMPORT
Limit

SET
VSWRALMPARAM(Mandatory)

Loopback Mode

NodeB SET STM1LOP(Optional)

LNCODE

Line Code

NodeB

SET
E1T1WORKMODE(Optional)

LNCODE

Line Code

NodeB

SET
E1T1WORKMODE(Optional)

Loopback
Time(minute)

SET IPREMOTELOOP(Optional)
NodeB SET E1T1LOP(Optional)
SET STM1LOP(Optional)

SET
IPREMOTELOOP(Mandatory)

PEERIP

Peer IP Address

NodeB

SCRAM

Scramble Mode

NodeB SET SCRAM(Optional)

SPEED

Speed

NodeB SET ETHPORT(Optional)

IP Clock Link No.

NodeB SET CLKMODE(Optional)

SRVPRIO

User Data Service

Priority

NodeB SET VLANCLASS(Mandatory)

TRAFFIC

Traffic Type

NodeB SET VLANCLASS(Mandatory)

VLANGROUP
VLAN Group No
NO

NodeB SET VLANCLASS(Optional)

BLK LOCELL(Optional)
ADD LOCELL(Mandatory)
SET RSCLMTPARA(Optional)
SET DESENS(Optional)
SET MACHSPARA(Optional)
SET MACEPARA(Optional)
LOCELL

Local Cell ID

NodeB

VLANID

VLAN ID

NodeB SET VLANCLASS(Optional)

VLANPRIO

VLAN Priority

NodeB SET VLANCLASS(Optional)

MTU

Maximum
Transmission Unit

NodeB

LOWERLIMIT

Minimum timer
value

NodeB SET CLSPATIMER

LSDF

Load Shutdown
Flag

NodeB SET SDPA(Optional)

LSDV

Load Shutdown
Voltage(V)

NodeB SET SDPA(Optional)

ACFC

Address & Control

Field Compress

NodeB

LST LOCELL(Optional)
DSP LOCELL(Optional)
DSP LOCELLRES(Optional)
UBL LOCELL(Optional)
RMV LOCELL(Mandatory)
MOD
RRUOFLOCELL(Mandatory)

SET ETHPORT(Optional)
ADD ETHTRK(Optional)

ADD MPLNK(Optional)
ADD PPPLNK(Optional)

LTCP

Low temperature
critical point

NodeB SET HTCDPA(Optional)

LTEM

Load Shutdown
Temperature.

NodeB SET HTPROTECT(Optional)

LTH

Low Temperature
Threshold

NodeB SET TATH(Optional)

MANUALSW

Manual Touchoff
Switch

NodeB SET EMGLICENSE(Optional)

ADDR

ATM Address

NodeB ADD AAL2NODE(Mandatory)

ADDR

ATM Address

NodeB ADD AAL2ADJNODE(Mandatory)

ANI

Adjacent Node ID

NodeB

ADD AAL2PATH(Optional)
ADD AAL2ADJNODE(Mandatory)

MAXAGCHPO E-AGCH Max

WER
Power

NodeB SET MACEPARA(Mandatory)

AUTH

Authentication

NodeB

AUTOSWITCH

Auto Switch to
MasAddr

NodeB ADD SCTPLNK(Optional)

BEAR

NCP/CCP Bearing
Type

NodeB ADD IUBCP(Optional)

MAXRRUPWR

Max RRU Output

Power

NodeB

ADD MPGRP(Mandatory)
ADD PPPLNK(Mandatory)

MOD
RRUOFLOCELL(Mandatory)

BEAR

Bearing Type

NodeB ADD IP2RSCGRP(Optional)

BEAR

Bearing Type

SET
HSDPAFLOWCTRLPARA(Option
NodeB
al)
ADD RSCGRP(Mandatory)

CDVT

Cell Delay Variation

ADD TREELNKPVC(Optional)
NodeB
Tolerance(0.1us)
ADD AAL2PATH(Optional)

Diff Max Delay(ms) NodeB ADD IMAGRP(Optional)

DESCRI

Description

NodeB

ADD TSCROSS(Optional)
ADD TREELNKPVC(Optional)

DHCPSVRIP

DHCP Server IP
Address

NodeB ADD DHCPSVRIP(Mandatory)

DSCP

Differentiated
Services Code
Point

NodeB ADD IPPATH(Mandatory)

DSTIP

Destination IP
Address

NodeB

MUL

Measurement
Upper Limit

NodeB SET NEMUANLGIN(Optional)

DSTMASK

NodeB ADD ALD(Mandatory)

NAME

Device Name

NodeB SET TMAMODE(Mandatory)

DSTRSCGRP

Destination
NodeB ADD TREELNKPVC(Mandatory)
Resource Group ID

DSTTSN

Destination E1/T1
Time Slot No.

NodeB ADD TSCROSS(Mandatory)

DSTVCI

Destination Port
VCI

NodeB ADD TREELNKPVC(Mandatory)

DSTVPI

Destination Port
VPI

NodeB ADD TREELNKPVC(Mandatory)

FLAG

Flag

NodeB ADD IUBCP(Optional)

FPMUXSWITC
FPMUX Switch
H

NodeB ADD IPPATH(Optional)

FRAATM

NodeB ADD FRAATM(Optional)

Fraatm Link No.

E-HICH HPC Mode

NSEHICHPCM
for Non-service
NodeB SET MACEPARA(Mandatory)
OD
Radio Links Set

E-HICH HPC
NSEHICHPCP Parameters for
ARA
Non-service Radio
Links Set

NodeB SET MACEPARA(Optional)

NSEHICHPO
WER

E-HICH Power for

Non-service Radio
Links Set

NSEHICHPW
ROFFSET

E-HICH Power
Offset for NonNodeB SET MACEPARA(Mandatory)
service Radio Links
Set

NodeB SET MACEPARA(Mandatory)

E-RGCH HPC
NSERGCHPC
Mode for NonNodeB SET MACEPARA(Mandatory)
MOD
service Radio Links

E-RGCH HPC
NSERGCHPC Parameters for
PARA
Non-service Radio
Links

NodeB SET MACEPARA(Optional)

E-RGCH Power for

NSERGCHPO
Non-service Radio NodeB SET MACEPARA(Mandatory)
WER
Links

E-RGCH Power
NSERGCHPW
Offset for NonNodeB SET MACEPARA(Mandatory)
ROFFSET
service Radio Links

FRAMELEN

Frame Max
Length(byte)

NodeB ADD IPPATH(Optional)

FRAMODE

Frame Mode

NodeB SET FRAMEMODE(Optional)

NTDI

Normal
temperature delta
Tint

NodeB SET HTCDPA(Optional)

NTDO

Normal
temperature delta
Tout

NodeB SET HTCDPA(Optional)

OBJAID

Object Alarm ID

NodeB ADD OBJALMSHLD(Mandatory)

OBJN

Object No.

NodeB ADD OBJALMSHLD(Mandatory)

OBJTP

Object Type

NodeB ADD OBJALMSHLD(Mandatory)

OCTHD

Overcurrent Alarm
Clear
Threshold(mA)

NodeB SET ALDPWRSW(Optional)

FRMLEN

Tx Frame Length

NodeB ADD IMAGRP(Optional)

OOS

On/Off Status

NodeB SET OUTPORT(Mandatory)

OOTHD

Overcurrent Alarm
Occur
Threshold(mA)

NodeB SET ALDPWRSW(Optional)

OPESORT

Operating Sort

NodeB SET ALDDEV(Mandatory)

ALD Protocl
Version

NodeB SET ALDDEV(Mandatory)

OPMODE

Operating Mode

SET TILTAER(Optional)
SET TMAGAIN(Optional)
SET SASUDCLD(Optional)
SET SASUDCSW(Optional)
NodeB SET SASUGAIN(Optional)
SET SASUMODE(Optional)
SET TMAMODE(Optional)
SET SASUVSWRTHD(Optional)
SET ANTTILT(Optional)

OPTYPE

Operation Type

NodeB MOD CMBGROUP(Mandatory)

OTH

Over Temperature
Threshold

NodeB SET TATH(Optional)

OPEVER

IFNO

Interface Number

NodeB ADD IPRT(Optional)

IFT

Interface Type

NodeB ADD IPRT(Mandatory)

IMAGRPN

IMA Group No.

NodeB

IMALNKN

IMA Link No.

NodeB ADD IMALNK(Optional)

INSTAG

Insert VLAN Tag

NodeB ADD VLANMAP(Optional)

ADD IMAGRP(Optional)
ADD IMALNK(Optional)

IP Address

NodeB ADD DEVIP(Mandatory)

IPHC

IP Header
Compress

NodeB

ADD MPGRP(Optional)
ADD PPPLNK(Optional)

IPMASK

Local IP Mask

NodeB

ADD MPGRP(Optional)
ADD PPPLNK(Optional)

JNRSCGRP

Join Resource
Group

ADD AAL2PATH(Optional)
ADD IPPATH(Optional)
NodeB
ADD SAALLNK(Optional)
ADD TREELNKPVC(Optional)

Link No.

NodeB ADD IPCLKLNK(Optional)

SAAL Link No.

NodeB ADD IUBCP(Optional)

SCTP Link No.

NodeB ADD IUBCP(Optional)

SAAL Link No.

NodeB

ADD AAL2NODE(Optional)
ADD AAL2ADJNODE(Optional)

LOCALIP

Local IP Address

NodeB

ADD MPGRP(Optional)
ADD PPPLNK(Optional)

RHUB Port ID

NodeB ADD RRU(Mandatory)

Private Key
PKPEnableSta Password Enabled NodeB SET CERTFILE(Optional)
State
LOCPORT

Local SCTP Port

NodeB ADD SCTPLNK(Mandatory)

MASK

Port No.

SET E1T1LOP(Optional)
SET
E1T1WORKMODE(Optional)
SET ETHPORT(Optional)
NodeB SET
HSDPAFLOWCTRLPARA(Option
al)
SET LR(Optional)
SET SCRAM(Optional)

Bearing Port No.

ADD AAL2PATH(Optional)
NodeB ADD IP2RSCGRP(Optional)
ADD RSCGRP(Optional)

Bearing Fraatm
Link No.

ADD AAL2PATH(Optional)
NodeB ADD RSCGRP(Optional)
ADD SAALLNK(Optional)

Fraatm Link No.

NodeB ADD OMCH(Mandatory)

Fraatm Link No.

SET
HSDPAFLOWCTRLPARA(Option
NodeB
al)
SET SCRAM(Optional)

MBS

Max Burst
Size(cell)

NodeB

ADD TREELNKPVC(Optional)
ADD AAL2PATH(Optional)

PORT

Destination Port

NodeB

ADD
FTPSCLTDPORT(Mandatory)

MCPPP

Multi Class PPP

NodeB ADD MPGRP(Optional)

MCR

Min Cell Rate

NodeB ADD SAALLNK(Mandatory)

ADD AAL2PATH(Mandatory)
ADD TREELNKPVC(Mandatory)

MCR

Min Cell Rate

NodeB

MINLNK

Min Number of
Links Activated

NodeB ADD IMAGRP(Optional)

MPDAAT

MLPPP Packets
Discard Alarm
Appear Threshold

NodeB ADD MPGRP(Optional)

PrivKey

Private Key File

Name

NodeB SET CERTFILE(Optional)

RRU Position

NodeB ADD RRU(Mandatory)

PSP

Power Supply Port

Of ALD(Antenna
NodeB SET ALDPWRSW(Mandatory)
Line Device)
System

PST

power type

NodeB SET NBPWRTYPE(Mandatory)

Port Type

NodeB SET ALMPORT

PTYPE

Power Type

NodeB SET PWRSYSCFG(Optional)

PubCert

Certificate File
Name

NodeB SET CERTFILE(Optional)

MPDADT

MLPPP Packets
Discard Alarm
Disappear
Threshold

NodeB ADD MPGRP(Optional)

PWD

Private Key
Password

NodeB SET CERTFILE(Mandatory)

PWD

Password

NodeB SET CHRSW

PWRMGN

Power Margin

NodeB SET MACHSPARA(Optional)

PWRMODE

Power Setting
Mode

NodeB MOD RRUOFLOCELL(Optional)

PWRSW

Power Supply
Switch Of
ALD(Antenna Line
Device) System

NodeB SET ALDPWRSW(Mandatory)

RADIUS

Local Cell Radius

NodeB ADD LOCELL(Optional)

RCN

RRU Chain No.

ADD RRU(Mandatory)
SET
NodeB
RRUCHAINBRKPOS(Mandatory)
ADD RRUCHAIN(Optional)

MPGRPN

ML PPP Group No. NodeB

ADD MPGRP(Optional)
ADD MPLNK(Optional)

REMOTECEL Index of remote cell

ADD
NodeB
LGRPINDEX group
REMOTECELLGRP(Mandatory)

REMOTECEL Name of Remote

LGRPNAME
Cell Group

NodeB

ADD
REMOTECELLGRP(Mandatory)

ADD MPLNK(Optional)
ADD PPPLNK(Optional)

MRU

Maximum Receive
Unit(byte)

NodeB

RETTP

RET Type

NodeB ADD ALD(Optional)

RFDS

RF Desensitivity

NodeB SET RFDESPARAM(Optional)

RGOPTYPE

Operation Type

NodeB

Rollback Mode

NodeB ACT BATCHFILE(Mandatory)

RMTCGRPID

Index of Remote
Cell Group

NodeB ADD LOCELL(Optional)

MOD ULGROUP(Mandatory)
MOD DLGROUP(Mandatory)

RMTCM

Remote Cell Mode NodeB ADD LOCELL(Optional)

RRU Name

NodeB ADD RRU(Optional)

MUXCP

PPP MuxCP

NodeB

RootCert

Root Certificate File

NodeB SET CERTFILE(Optional)
Name

RRUMODE

RRU Mode

NodeB ADD LOCELL(Optional)

RRU Work
Standard

NodeB ADD RRU(Mandatory)

RSCALLOCM

Resource Allocate
Method

NodeB SET MACHSPARA(Optional)

NEXTHOP

Next Hop IP
Address

NodeB ADD IPRT(Mandatory)

NEXTHOPIP

Next Hop IP

NodeB ADD VLANMAP(Mandatory)

ADD MPGRP(Optional)
ADD PPPLNK(Optional)

RSCLMSW

Resource Limiting
Switch

NodeB SET MACHSPARA(Optional)

RSTMODE

Reset Mode

NodeB SET CFGFILEENB(Mandatory)

Tscross No.

NodeB ADD TSCROSS(Mandatory)

PVC No.

NodeB ADD TREELNKPVC(Mandatory)

RRU Type

NodeB ADD RRU(Mandatory)

NODEBIP

NodeB IP Address

NodeB ADD IPPATH(Mandatory)

RTWPINITADJ

RTWP Initial
Adjusting(0.1dB)

NodeB SET RTWPINITADJ(Mandatory)

Node Type

NodeB ADD AAL2NODE(Mandatory)

RULE

Resource Allocate
Rule

NodeB SET RESALLOCRULE(Optional)

Node Type

NodeB ADD AAL2PATH(Mandatory)

RXID

Rx Index

NodeB SET RXATTEN(Mandatory)

RxNo

Rx Unit No.

NodeB SET RXSW(Optional)

RXSW

Rx Unit Switch.

NodeB SET RXSW(Mandatory)

PATHCHK

Path Check

NodeB ADD IPPATH(Optional)

PATHID

IP Path ID

NodeB ADD IPPATH(Mandatory)

PATHID

AAL2 Path ID

NodeB ADD AAL2PATH(Mandatory)

PCR

Peak Cell Rate

NodeB ADD SAALLNK(Mandatory)

SBS

Subboard Status

NodeB SET SUBBRD(Mandatory)

SBT

Subboard Type

NodeB SET SUBBRD(Mandatory)

Subboard Type

ADD LNKSRC(Mandatory)
ADD DEVIP(Mandatory)
ADD PPPLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD FRAATM(Mandatory)
ADD IMAGRP(Mandatory)
ADD IMALNK(Mandatory)
ADD IP2RSCGRP(Mandatory)
ADD IPPATH(Mandatory)
ADD IPRT(Mandatory)
NodeB
ADD MPGRP(Mandatory)
ADD MPLNK(Mandatory)
ADD OMCH(Mandatory)
ADD RSCGRP(Mandatory)
ADD SAALLNK(Mandatory)
ADD UNILNK(Mandatory)
ADD CFMMEP(Mandatory)
ADD ETHTRK(Mandatory)
ADD ETHTRKLNK(Mandatory)
ADD BACKE1T1(Mandatory)

SBT

Subboard Type

SET
E1T1WORKMODE(Mandatory)
NodeB SET ETHPORT(Mandatory)
SET LR(Mandatory)
SET SCRAM(Mandatory)

SBT

Subboard Type

SET
NodeB HSDPAFLOWCTRLPARA(Mand
atory)

SCCHPWR

HS-SCCH Power

NodeB SET MACHSPARA(Mandatory)

SBT

SCHEDULEPA MAC-e Schedule

RA
Para

NodeB SET MACEPARA(Optional)

SCID

Source Cell ID

NodeB ADD CMBGROUP(Mandatory)

PCR

Peak Cell Rate

NodeB

PEERIP

Peer IP Address

ADD SCTPLNK(Mandatory)
NodeB ADD PPPLNK(Optional)
ADD MPGRP(Optional)

PEERPORT

Peer SCTP Port

NodeB ADD SCTPLNK(Mandatory)

PFC

Protocol Field
Compress

NodeB

ADD MPLNK(Optional)
ADD PPPLNK(Optional)

PPPLNKN

ML PPP Link No.

NodeB

ADD MPLNK(Optional)
ADD PPPLNK(Optional)

PREF

Route Preference

NodeB ADD IPRT(Optional)

Start Date

NodeB STR E1T1RTTST(Mandatory)

SDAY

Start date

NodeB SET TZ(Mandatory)

SDSEV

Simple Discharge
End Voltage(V)

NodeB SET BATCTPA(Optional)

ADD AAL2PATH(Mandatory)
ADD TREELNKPVC(Mandatory)

SDSTML

Simple Discharge
Time LimitMinute

NodeB SET BATCTPA(Optional)

PWD

Password

NodeB

SECN

Sector No.

ADD SEC(Mandatory)
NodeB ADD LOCELL(Mandatory) ADD
TXPAIR(Manaatory)

SECN

Sector No.

NodeB

RCR

Receive Cell Rate

NodeB ADD AAL2PATH(Mandatory)

SECT

Sector Type

NodeB

SECTORID11

Supported
Frequency Band of NodeB SET ALDDEV(Mandatory)
800MHz

ADD MPGRP(Mandatory)
ADD PPPLNK(Mandatory)

SET ANTTILT(Mandatory)
SET TILTAER(Mandatory)

ADD SEC(Optional)
ADD LOCELL(Mandatory)

Supported
SECTORID20 Frequency Band of NodeB SET ALDDEV(Mandatory)
800MHz

E-HICH HPC Mode

SEHICHPCMO
for Service Radio
NodeB SET MACEPARA(Mandatory)
D
Links Set

E-HICH HPC
SEHICHPCPA Parameters for
RA
Service Radio
Links Set

NodeB SET MACEPARA(Optional)

SEHICHPOW
ER

E-HICH Power for

Service Radio
Links Set

NodeB SET MACEPARA(Mandatory)

SEHICHPWR
OFFSET

E-HICH Power
Offset for Service
Radio Links Set

NodeB SET MACEPARA(Mandatory)

E-RGCH HPC
SERGCHPCM
Mode for Service
OD
Radio Links Set

NodeB SET MACEPARA(Mandatory)

E-RGCH HPC
SERGCHPCP Parameters for
ARA
Service Radio
Links Set

NodeB SET MACEPARA(Optional)

E-RGCH Power for

SERGCHPOW
Service Radio
NodeB SET MACEPARA(Mandatory)
ER
Links Set

E-RGCH Power
SERGCHPWR
Offset for Service
OFFSET
Radio Links Set

NodeB SET MACEPARA(Mandatory)

SERIAL

Serial No.

NodeB ADD ALD(Optional)

SERIALNUM

Antenna Serial No. NodeB SET ALDDEV(Mandatory)

SERVERIP

FTP Server Ip
Address

NodeB

SFACHID

Source FACH
Channel ID

NodeB ADD CMBGROUP(Mandatory)

SHLDFLG

Shield Flag

NodeB SET ALMSHLD(Mandatory)

ADD
FTPSCLTDPORT(Mandatory)

ADD MPLNK(Optional)
ADD PPPLNK(Optional)

RESTARTTMR RestartTimer(ms)

NodeB

SINGLERLEHI E-HICH Power for

CHPOWER
Single Radio Link

NodeB SET MACEPARA(Mandatory)

RNCIP

NodeB ADD IPPATH(Mandatory)

RNC IP Address

Start date mode

NodeB SET TZ(Mandatory)

Scheduling Method NodeB SET MACHSPARA(Optional)

SMONTH

Start month

NodeB SET TZ(Mandatory)

Slot No.

SET RTWPINITADJ(Mandatory)
SET TXSW(Mandatory)
SET IFOFFSET(Mandatory)
SET RXATTEN(Mandatory)
SET RFDESPARAM(Mandatory)
SET
VSWRALMPARAM(Mandatory)
SET RXSW(Optional)
NodeB
ADD OBJALMSHLD(Mandatory)
ADD RRU(Mandatory)
SET OUTPORT(Mandatory)
SET SUBBRD(Mandatory)
ADD BRD(Mandatory)
SET CLKMODE(Optional)
SET ALMPORT(Mandatory)
SET RXINTDETSW(Optional)

Slot No.

ADD LNKSRC(Mandatory)
ADD DEVIP(Mandatory)
ADD PPPLNK(Mandatory)
ADD AAL2PATH(Mandatory)
ADD FRAATM(Mandatory)
ADD IMAGRP(Mandatory)
ADD IMALNK(Mandatory)
ADD IP2RSCGRP(Mandatory)
ADD IPCLKLNK(Mandatory)
ADD IPPATH(Mandatory)
ADD IPRT(Mandatory)
ADD MPGRP(Mandatory)
NodeB
ADD MPLNK(Mandatory)
ADD OMCH(Mandatory)
ADD RSCGRP(Mandatory)
ADD SAALLNK(Mandatory)
ADD SCTPLNK(Mandatory)
ADD UNILNK(Mandatory)
ADD CFMMA(Mandatory)
ADD CFMMEP(Mandatory)
ADD BFDSESSION(Mandatory)
ADD ETHTRK(Mandatory)
ADD ETHTRKLNK(Mandatory)
ADD BACKE1T1(Mandatory)

Slot No.

SET E1T1BEAR(Mandatory)
SET E1T1LOP(Mandatory)
SET
E1T1WORKMODE(Mandatory)
SET ETHPORT(Mandatory)
SET
HSDPAFLOWCTRLPARA(Mand
atory)
NodeB
SET
IPREMOTELOOP(Mandatory)
SET LR(Mandatory)
SET SCRAM(Mandatory)
SET
STM1WORKMODE(Mandatory)
SET STM1LOP(Mandatory)
SET SDHJ0J1J2(Mandatory)

SN1

Slot No. of Power

Amplifier1

NodeB ADD LOCELL(Optional)

SN2

Slot No. of Power

Amplifier2

NodeB ADD LOCELL(Optional)

SNB

Slot No. of RRU

Begin

ADD SEC(Optional)
NodeB ADD LOCELL(Optional)
ADD TXPAIR(Optional)

SNE

Slot No. of RRU

Sensor Output
Upper LimitA

NodeB SET NEMUANLGIN(Optional)

Sync
Period(Minute)

NodeB SET SNTPCLTPARA(Optional)

RSCGRPID

ADD AAL2PATH(Optional)
ADD IP2RSCGRP(Optional)
Resource Group ID NodeB ADD IPPATH(Optional)
ADD RSCGRP(Optional)
ADD SAALLNK(Optional)

SPR

Speed Rate

NodeB ADD LOCELL(Mandatory)

SPTSTATEFW Support State

L
Firewall

NodeB SET FTPSCLT(Optional)

SRCPN

Source Port No.

NodeB ADD TREELNKPVC(Optional)

SRCPN

Source Fraatm Link

NodeB ADD TREELNKPVC(Optional)
No.

SRCPN

Source Port No.

NodeB ADD TSCROSS(Mandatory)

SRCPT

Source Port Type

NodeB ADD TREELNKPVC(Mandatory)

RSW

Expected Rx
Switch

NodeB SET SDHJ0J1J2(Optional)

SRCSBT

Source Subboard
Type

NodeB

ADD TREELNKPVC(Mandatory)
ADD TSCROSS(Mandatory)

SRCSBT

Source Subboard
Type

NodeB

ADD TREELNKPVC(Mandatory)
ADD TSCROSS(Mandatory)

SRCSN

Source Slot No.

NodeB ADD TREELNKPVC(Mandatory)

SRCSN

Source Slot No.

NodeB ADD TSCROSS(Mandatory)

SRCSRN

Source Subrack
No.

NodeB ADD TREELNKPVC(Mandatory)

RTTYPE

Route Type

NodeB ADD IPRT(Mandatory)

Rate Unit

ADD AAL2PATH
ADD SAALLNK
NodeB ADD TREELNKPVC
ADD RSCGRP
ADD OMCH

RXBW

Rx
Bandwidth(kbps)

NodeB ADD IPPATH(Mandatory)

E-HICH Power
SRLEHICHPW
Offset for Single
ROFFSET
Radio Link

NodeB SET MACEPARA(Mandatory)

SRN

SET TXSW(Mandatory)
SET IFOFFSET(Mandatory)
SET RXATTEN(Mandatory)
SET RFDESPARAM(Mandatory)
SET
VSWRALMPARAM(Mandatory)
SET RXSW(Mandatory)
SET HTPROTECT(Mandatory)
SET BCFCVOLTAGE(Mandatory)
ADD OBJALMSHLD(Mandatory)
SET TMAGAIN(Mandatory)
ADD RRU(Mandatory)
SET ACDCVLIMIT(Mandatory)
SET BATATPA(Mandatory)
SET BATCTPA(Mandatory)
SET HTCDPA(Mandatory)
SET OUTPORT(Mandatory)
SET PWRSYSCFG(Mandatory)
NodeB SET TATH(Mandatory)
SET SUBBRD(Mandatory)
SET TILTAER(Mandatory)
SET SASUDCLD(Mandatory)
SET SASUDCSW(Mandatory)
SET SASUGAIN(Mandatory)
SET SASUMODE(Mandatory)
SET ANTTILT(Mandatory)
ADD NPSU(Mandatory)
SET HTPA(Mandatory)
SET SDPA(Mandatory)
ADD BRD(Mandatory)
ADD ALD(Mandatory)
SET SDPA(Mandatory)
SET TMAMODE(Mandatory)
SET CLKMODE(Optional)
SET ALDPWRSW(Mandatory)
SET ALMPORT(Mandatory)
SET RXINTDETSW(Mandatory)

Subrack No.

SRN

RXV

Expected Rx
Information

NodeB SET SDHJ0J1J2(Optional)

RXVER

Expected Rx
Procotol Version

NodeB SET SDHJ0J1J2(Optional)

SAALNO

SAAL Link No.

NodeB ADD SAALLNK(Optional)

SCR

Sustain Cell Rate

NodeB ADD TREELNKPVC(Optional)

Start time

NodeB SET TZ(Mandatory)

Start Time

NodeB STR E1T1RTTST(Mandatory)

SCR

Sustain Cell Rate

NodeB ADD AAL2PATH(Mandatory)

STN

Site No.

ADD SITE(Mandatory)
ADD SEC(Mandatory)
NodeB
ADD LOCELL(Mandatory) ADD
TXPAIR(Mandatory)

STN

Site No.

NodeB

STNAME

Site Name

NodeB ADD SITE(Mandatory)

SET ANTTILT(Mandatory)
SET TILTAER(Mandatory)

SCRAM

Scramble Mode

ADD FRAATM(Optional)
NodeB ADD IMAGRP(Optional)
ADD UNILNK(Optional)

SCTPNO

SCTP Link No.

NodeB ADD SCTPLNK(Optional)

SUBUNIT

Subunit No.

NodeB ADD ALD(Mandatory)

Switch of Time
Sync

NodeB SET SNTPCLTPARA(Optional)

SECLOCIP

Second Local IP
Address

NodeB ADD SCTPLNK(Optional)

SWEEK

Start week

NodeB SET TZ(Mandatory)

SECPEERIP

Second Peer IP
Address

NodeB ADD SCTPLNK(Optional)

SWITCH

Function Switch

NodeB

SET
VSWRALMPARAM(Mandatory)

SWITCH

Smooth Power
Change Function
Switch

NodeB

SET
SMTHPWRSWTCH(Mandatory)

SWSEQ

Start week
sequence

NodeB SET TZ(Mandatory)

SIP

Server IP Address

NodeB ADD IPCLKLNK(Mandatory)

TCC

Temperature
Compensation
Coefficient

NodeB ADD BATTERY(Optional)

TCN

Tail Cabinet No.

NodeB ADD RRUCHAIN(Optional)

SRCRSCGRP

Source Resource
Group ID

NodeB ADD TREELNKPVC(Mandatory)

TDSTM

Timely Discharge
Test Time

NodeB SET BATATPA(Optional)

TILT

Antenna Tilt(0.1
degree)

NodeB SET ANTTILT(Mandatory)

TILT1

Installed
Mechanical Tilt

NodeB SET ALDDEV(Mandatory)

TILT2

Installed
Mechanical Tilt

NodeB SET ALDDEV(Mandatory)

SRCTSN

Source E1/T1 Time

NodeB ADD TSCROSS(Mandatory)
Slot No.

SRCVCI

Source Port VCI

NodeB ADD TREELNKPVC(Mandatory)

SRCVPI

Source Port VPI

NodeB ADD TREELNKPVC(Mandatory)

TLL

Temperature Alarm
NodeB MOD NEMUTHLIMIT(Optional)
Lower Limit

TLT

Tout Limit

NodeB SET HTCDPA(Optional)

Time

NodeB SET EMGLICENSE(Mandatory)

Time offset(Minute) NodeB SET TZ(Mandatory)

RRU Topo Position NodeB ADD RRU(Mandatory)

TPN

Tail Port No.

NodeB ADD RRUCHAIN(Mandatory)

Service Type

NodeB ADD TREELNKPVC(Optional)

Bearing Service
Type

NodeB ADD AAL2PATH(Optional)

SET
NodeB STM1WORKMODE(Optional)
SET STM1LOP(Optional)

STM1N

STM1 No.

TSN

Tail Interface Board

NodeB ADD RRUCHAIN(Mandatory)
Slot No.

TSRN

Tail Subrack No.

NodeB ADD RRUCHAIN(Optional)

Topo Type

NodeB ADD RRUCHAIN(Optional)

TUL

Temperature Alarm
NodeB MOD NEMUTHLIMIT(Optional)
Upper Limit

SUBFRAMELE Sub Frame Max

N
Length(byte)

NodeB ADD IPPATH(Optional)

Tx Switch

NodeB SET SDHJ0J1J2(Optional)

Trace Byte

NodeB SET SDHJ0J1J2(Optional)

TIMER

Timer(ms)

NodeB ADD IPPATH(Optional)

TS16

16th Timeslot
Support

NodeB

TxNo

Tx Unit No.

NodeB SET TXSW(Mandatory)

TXSW

Tx Unit Switch

NodeB SET TXSW(Mandatory)

TSN

E1/T1 Time Slot

No.

ADD MPLNK(Mandatory)
NodeB ADD PPPLNK(Mandatory)
ADD FRAATM(Mandatory)

ADD IMAGRP(Optional)
ADD UNILNK(Optional)

TXBW

TX
Bandwidth(kbps)

NodeB ADD IPPATH(Mandatory)

TXBW

Tx
Bandwidth(kbps)

NodeB ADD RSCGRP(Mandatory)

TYPE

Sensor Type

NodeB SET NEMUANLGIN(Optional)

UCTHD

Undercurrent Alarm
Clear
NodeB SET ALDPWRSW(Optional)
Threshold(mA)

Upper Limit

NodeB SET NEMUINVLIMIT(Optional)

Upper Alarm Occur

NodeB ADD IPPATH(Mandatory)

UOTHD

Undercurrent Alarm
Occur
NodeB SET ALDPWRSW(Optional)
Threshold(mA)

UPPERLIMIT

Maximum timer
value

NodeB SET CLSPATIMER

USR

User Name

NodeB SET CHRSW

TXT

Tx Type

NodeB SET SDHJ0J1J2(Optional)

TXV

Tx Information

NodeB SET SDHJ0J1J2(Optional)

VENDOR

Vendor Code

NodeB ADD ALD(Optional)

TXVER

Tx Procotol Version NodeB SET SDHJ0J1J2(Optional)

ADD MPGRP(Mandatory)
ADD PPPLNK(Mandatory)

User Name

NodeB

UNILNKN

UNI Link No.

NodeB ADD UNILNK(Optional)

VCI

Bearing VCI

NodeB

ADD AAL2PATH(Mandatory)
ADD SAALLNK(Mandatory)

VST

VP/VC Switch Type NodeB ADD TREELNKPVC(Mandatory)

RRU Vertical

NodeB ADD RRU(Optional)

Work Mode

NodeB MOD DEMMODE(Optional)

ZONET

Time zone

NodeB SET TZ(Optional)

Switch of Detecting NodeB SET RXINTDETSW(Optional)

Check mode

NodeB SET RXINTDETSW(Optional)

IQDL

IQ Data Length

Rate Unit

ADD SAALLNK(Mandatory)
ADD AAL2PATH(Mandatory)
NodeB ADD TREELNKPVC(Mandatory)
ADD OMCH(Mandatory)
ADD RSCGRP(Mandatory)

ICPT

Ipclk ProtocolType

NodeB ADD IPCLKLNK(Optional)

Domain

NodeB ADD IPCLKLNK(Optional)

BELONG

Belong Flag

NodeB

NAME

MD name

NodeB ADD CFMMD(Mandatory)

LEVEL

MD level

NodeB ADD CFMMD(Optional)

MD Name

ADD CFMMA(Mandatory)
ADD CFMMEP(Mandatory)
NodeB
ADD CFMRMEP(Mandatory)
ADD CFMBNDIP(Mandatory)

MANAME

MA Name

ADD CFMMA(Mandatory)
ADD CFMMEP(Mandatory)
NodeB
ADD CFMRMEP(Mandatory)
ADD CFMBNDIP(Mandatory)

VLANID

VLAN ID

NodeB ADD CFMMA(Mandatory)

MDNAME

ADD IUBCP(Optional)
ADD AAL2NODE(Optional)

MEPID

MEP ID

NodeB ADD CFMMEP(Mandatory)

RMEPID

RMEP ID

NodeB ADD CFMBNDIP(Mandatory)

MAC

RMEP MAC Addr

NodeB ADD CFMRMEP(Optional)

BNDIP

RMEP IP Addr

NodeB ADD CFMBNDIP(Mandatory)

NodeB ADD ETHTRK(Optional)

CQI Adjust
CQIADJALGO Algorithm Switch of
NodeB SET MACHSPARA(Optional)
FCON
Conversational
Service

CQI Adjust
CQIADJALGO Algorithm Switch of
NodeB SET MACHSPARA(Optional)
FNONCON
non-Conversational
Service

RBLERTARGE Residual Bler

T
Target

NodeB SET MACHSPARA(Optional)

HSUPACESC
HSWITCH

HSUPA CE
SCHEDULING
SWITCH

NodeB SET MACEPARA(Optional)

HSUPAOLSC
HSWITCH

HSUPA
OVERLOAD
SCHEDULING
SWITCH

NodeB SET MACEPARA(Optional)

SLOCELL

Source LocalCell
ID

NodeB ADD PAGRP(Mandatory)

DLOCELL

Destination
LocalCell ID

NodeB ADD PAGRP(Mandatory)

MAXSHRTO

Max Sharing Power

NodeB ADD PAGRP(Optional)
Ratio

SHMGN

Sharing Power
Margin

NodeB ADD PAGRP(Optional)

SWITCH

R99 Flow Control

Function Switch

SET
NodeB R99FLOWCTRLSWICH(Mandat
ory)

DLRESMODE

Dl BB Resource
Allocation Mode

NodeB ADD LOCELL(Optional)

BBPOOLTYPE

BB Resource Pool
Type

NodeB ADD LOCELL(Optional)

ISD

Itel Shutdown
Switch

Switch of Detecting NodeB SET RXINTDETSW(Optional)

Check mode

SET
NodeB ITELSHUTDOWN(Mandatory)

NodeB SET RXINTDETSW(Optional)

IQDL

IQ Data Length

Bearing Port Type

NodeB ADD AAL2PATH(Optional)

ADD DEVIP(Optional)ADD
IPPATH(Optional)

Port Type

NodeB

Bearing Port Type

NodeB ADD IP2RSCGRP(Optional)

Port Type

NodeB ADD LNKSRC(Optional)

Port Type

NodeB ADD OMCH(Optional)

Bearing Port Type

NodeB ADD RSCGRP(Optional)

IMAGRPSBT

IMA Group
Subboard Type

NodeB ADD IMALNK(Optional)

IPDAAT

IP Packets Discard
ADD MPGRP(Optional)ADD
Alarm Appear
NodeB
PPPLNK(Optional)
Threshold

IPDAAT

IP Packets Discard
ADD MPGRP(Optional)ADD
Alarm Disappear
NodeB
PPPLNK(Optional)
Threshold

MPGRPSBT

ML PPP Group
Subboard Type

RMEPID

RMEP ID

NodeB ADD CFMRMEP(Mandatory)

SBT

Subboard Type

SET
STM1WORKMODE(Mandatory)
NodeB
SET STM1LOP(Mandatory)
SET SDHJ0J1J2(Mandatory)

OAM3AHSW

3ah Switch

SET
NodeB STM1WORKMODE(Mandatory)
SET STM1LOP(Mandatory)

PTPPRI

PTP Priority

NodeB SET DIFPRI(Mandatory)

CLEAR

Clear Statistic

NodeB DSP CFMMEP(Mandatory)

STR
NodeB CFMLOOPBACKTST(Mandatory
)

CNT

No. of Send
Packets

STR
Packet Size(bytes) NodeB CFMLOOPBACKTST(Mandatory
)

TMOUT

Timeout(s)

STR
NodeB CFMLOOPBACKTST(Mandatory
)

INTVL

Interval(s)

STR
NodeB CFMLOOPBACKTST(Mandatory
)

Port Type

NodeB SET LR(Mandatory)

PTYPE

The type of power

NodeB ADD BATTERY(Mantory)

Description

Value Type

GUI Value Range

Actual Value Range Unit

Upper limit ratio of the power for

the user with 128 kbps GBR to the Interval Type
total power of the cell

1~100

Upper limit ratio of the power for

the user with 16 kbps GBR to the
total power of the cell

Interval Type

1~100

16QAM Switch

ARP Proxy

Enumeration
Type

DISABLE(Disable
Arp Proxy),
ENABLE(Enable
Arp Proxy)

DISABLE, ENABLE None

Antenna Connector Number

Enumeration
Type

N0A,
N1B,
N3A,
N4B,

N0B,
N2A,
N3B,
N5A,

N1A,
N2B,
N4A,
N5B

N0B,
N2A,
N3B,
N5A,

N1A,
N2B,
N4A,
N5B

None

AC Upper Limit of the NPMU

MASTER

It is the No. of the first antenna

connector; There are one or more
antenna channels in one sector.
The number of the channels
Enumeration
equals antenna magnitude. The
Type
antenna channels are identified by
antenna connectors at the cabinet
top, hereinafter referred to as
"antenna connector".

R0A(Cabinet
No.0A Ant),
R0B(Cabinet
No.0B Ant)

It is the Antenna No. of the first

antenna connector;

ANTA(No.A Ant of
Power Amplifier),
ANTA, ANTB
ANTB(No.B Ant of
Power Amplifier)

None

Subrack No. of Antenna Channel1:

There are one or more antenna
channels in one sector. The
number of the channels equals
antenna magnitude. The antenna Interval Type
channels are identified by antenna
connectors at the cabinet top,
hereinafter referred to as "antenna
connector".

20~254

None

Cabinet No. of Antenna Channel2:

MASTER(Master
cabinet)

MASTER

None

Enumeration
Type

R0A, R0B

None

It is the No. of the second antenna

R0A(Cabinet
No.0A Ant),
R0B(Cabinet
No.0B Ant)

It is the Antenna No. of the second Enumeration

antenna connector;
Type

ANTA(No.A Ant of
Power Amplifier),
ANTA, ANTB
ANTB(No.B Ant of
Power Amplifier)

None

Subrack No. of Antenna Channel2:

20~254

None

Cabinet No. of Antenna Channel3:

MASTER(Master
cabinet)

MASTER

None

R0A, R0B

None

It is the No. of the third antenna

R0A(Cabinet
No.0A Ant),
R0B(Cabinet
No.0B Ant)

R0A, R0B

None

20~254

None

It refers to the magnitude of

antennas in the sector. Do not use Enumeration
it when Sector Type is Distributed Type
Sector.

1(single antenna),
2(two antennas),
4(four antennas)

1, 2, 4

None

BER Threshold

Enumeration
Type

1E-3(E1/T1 high bit

error rate threshold
1E-3), 1E-4(E1/T1
high bit error rate
threshold 1E-4),
1E-3, 1E-4, 1E-5,
1E-5(E1/T1 high bit 1E-6
error rate threshold
1E-5), 1E-6(E1/T1
high bit error rate
threshold 1E-6)

None

Enumeration
Type

TMA12DB_ONLY_
NON_AISG (Only
TMA 12dB
(NON_AISG)),
TMA24DB_ONLY_
NON_AISG (Only
TMA 24dB
(NON_AISG)),
RET_ONLY_COAX
IAL (Only RET
(COAXIAL)),
RET_ONLY_MULT
ICORE (Only RET
(MULTICORE)),
TMA12DB_AISG
(12dB TMA and
RET or Only TMA
12dB (AISG)),
TMA24DB_AISG
(24dB TMA and
RET or Only TMA
24dB (AISG)),
CUSTOM
(Custom)

TMA12DB_ONLY_N
ON_AISG
TMA24DB_ONLY_N
ON_AISG
None
RET_ONLY_COAXI
AL TMA12DB_AISG
TMA24DB_AISG
CUSTOM

Enumeration
Type

WATER (water
immersion),
SMOKING
(smoking),
INFRARED
(infrared),
GATING (door
control)

WATER, SMOKING,
INFRARED,
None
GATING

Battery Auto Test Mode

Enumeration
Type

PERIOD (Period
Auto Test),
POWERCUT
(Power Cut Auto
Test),
PERIODPOWERC
UT (Period and
Power Cut Auto
Test),
NOAUTOTEST
(No Auto Test)

PERIOD,
POWERCUT,
None
PERIODPOWERCU
T, NOAUTOTEST

Value of the WRFU/RRU RX

Attenuation

Interval Type

0, 4~22

Timer_CC, which indicates the

length of the SSCOP timer
Timer_CC specified in the SAALrelated protocol.

Interval Type

100~65535

Antenna Line Device (ALD)

System Type

Alarm Type Value

SSL Handshake Authentication

Mode

Enumeration
Type

NONE (Verify
None), PEER
(Verify Peer
Certificate)

None, PEER

None

Auto Touchoff Switch

Enumeration
Type

ON, OFF

None

Clock Mode. If this parameter is

not specified, the original value is
kept.

Enumeration
Type

MASTER(Master),
MASTER, SLAVE
SLAVE(Slave)

None

NEMU Dedicated Boolean Alarm

Voltage

Enumeration
Type

HIGH (High), LOW

HIGH, LOW
(Low)

None

Alarm Voltage

Enumeration
Type

HIGH (Alarms at
high impedance),
LOW (Alarms at
low impedance)

HIGH, LOW

None

Frequency Band

Enumeration
Type

No, Yes

None

Frequency Band

Enumeration
Type

No, Yes

None

Frequency Band

Enumeration
Type

No, Yes

None

Frequency Band

Enumeration
Type

No, Yes

None

Frequency Band

Enumeration
Type

No, Yes

None

Frequency Band

Enumeration
Type

No, Yes

None

Base station ID

String Type

None

A string of up to 12
bytes

None

Base station ID

String Type

None

A string of up to 32
bytes

None

Battery Capacity

Interval Type

5~600

Boost-Charging Duration

Interval Type

30~240

day

0.05~0.25

None

INNER, OUTER

None

Over-temperature alarm threshold

Interval Type
of battery temperature

40~79

Celsi
us

Under-temperature alarm
threshold of battery temperature

Interval Type

-19~5

Celsi
us

Boost-Charging Voltage of the

NPMU

Any Type

43.2~57.6

43.2~57.6,
Precision: 0.01

Battery Current Limiting Coefficient Any Type

Environment Mode

Enumeration
Type

Beamwidth

Range Type

0~255

deg

Beamwidth

Range Type

0~255

deg

Beamwidth

Range Type

0~255

deg

Beamwidth

Range Type

0~65535

deg

Beamwidth

Range Type

0~65535

deg

Beamwidth

Range Type

0~65535

deg

Beamwidth

Range Type

0~65535

deg

Discard Rate. The link is not

congested when the frame loss
ratio is lower than or equal to this
threshold.

Interval Type

0~1000

0~1, Step: 0.001

None

Destination IP Address. This

parameter must meet all the
following conditions:
The IP address must be the one of
legal A, B, or C type, excluding
the default route (IP address
IP Address Type [Link]).
The IP & mask must be equal to
this IP address.
The mask in binary does not allow
"0" before "1", or "1" after "0".

[Link]~255.255.255
None
.255

Destination IP Mask. This

parameter must meet all the
following conditions:
The IP & mask must be equal to
IP Address Type this IP address.
The mask in binary does not allow
"0" before "1", or "1" after "0".

[Link]~255.255.255
None
.255

Excessive Burst Size

Interval Type

0~155000

kbit

Antenna Bearing

Range Type

0~65535

None

Battery Overtemperature
Shutdown Flag

Enumeration
Type

DISABLE(Disable),
ENABLE, DISABLE
ENABLE(Enable)

None

Link Backup Mode (For Ring

Topology Only)

Enumeration
Type

COLD, HOT

None

Number of the Sub-Board of the

E1/T1 Routine Test

Interval Type

Enable Switch

Enumeration
Type

COLD, HOT

0 None

DISABLE(Disable),
DISABLE, ENABLE None
ENABLE(Enable)

First Break Point Position of the

RRU Chain/Ring

Interval Type

0~8

None

Second Break Point Position of the

RRU Chain/Ring (For Ring
Topology Only) If it is not specified, Interval Type
it equals to the value of the first
break point position.

0~8

None

Enable Switch

Enumeration
Type

DISABLE(Disable),
DISABLE, ENABLE None
ENABLE(Enable)

Battery Shutdown Flag

Enumeration
Type

DISABLE(Disable),
ENABLE, DISABLE None
ENABLE(Enable)

Battery Shutdown Voltage

Any Type

35.0~55.6

35.0~55.6,
Precision: 0.01

Frame Error Rate

AppearThreshold of FE MAC
Layer

Interval Type

0~100

0~0.1, Step: 0.001

None

Added Board Type

Enumeration
Type

NEMU (NE
Environment
Monitoring Unit),
NFAN (NodeB FAN
Box), WMPT
(WCDMA Main
Processing &
Transmission unit),
UTRP (Universal
extension
TRansmission
Processing unit),
WBBPa (WCDMA
BaseBand Process
unit type A),
WBBPb (WCDMA
BaseBand Process
unit type B), UPEA
(Universal Power
and environment
Interface Unit A),
UPEB (Universal
Power and
environment
Interface Unit B),
UEIU (Universal
environment
Interface Unit).

Activated Board Type

Enumeration
Type

HBBU/HBBUC,
MRRU, RHUB,
PRRU

None

Battery Shutdown Temperature

Interval Type

40~70

degre
e

Number of the Carrier in the Initial

RTWP Adjusting

Interval Type

0~1(2 carrier
RRU), 0~3(4
carrier RRU)

0~1(2 carrier RRU),

0~3(4 carrier RRU)

None

WMPT, UTRP,
WBBPa, WBBPb,
MRRU, RHUB,
PRRU, SRXU,
WRFU

None

Antenna Line Device Scenario

Enumeration
Type

REGULAR
(Regular
Installation
Scenario: One
RET antenna
connects to one
antenna connector
for signal
transmission),
SECTOR_SPLITTI
NG (Sector
Splitting Scenario:
A number of RET
antennas transmit
signals to cover
one cell in which
the single sector is
logically divided
into multiple subsectors),
DAISY_CHAIN
(Antenna
Cascaded
Scenario: A
number of RET
antennas are
sequentially
connected to a
single cable),
2G_EXTENSION
(2G Extension
Scenario: Control
the RET antennas
of 2G networks by
NodeB)

REGULAR,
SECTOR_SPLITTIN
None
G, DAISY_CHAIN,
2G_EXTENSION

Frame Error Rate

DisappearThreshold of FE MAC
Layer

Interval Type

0~100

0~0.1, Step: 0.001

Enabled State of the SSL

Certificate Chain

Enumeration
Type

DISABLE(Disable),
Disable, Enable
ENABLE(Enable)

None

A flag, which indicates whether

Enumeration
the OM channel is the master one
Type
or the slave one.

MASTER(Master
Channel),
SLAVE(Slave
Channel)

MASTER, SLAVE

None

FPMUX Switch, which is a switch

to enable or disable FP
multiplexing.

DISABLE(Disable
FP multiplexing),
ENABLE(Enable
FP multiplexing)

DISABLE, ENABLE None

None

A string of up to 64
characters

Enumeration
Type

Name of the SSL Certificate Chain

String Type
File

None

Fault Handling Mode for Failure in Enumeration

Running the Batch Command Files Type

BEST_EFFORT
(Best effort),
BREAK_ON_FAIL
URE (Break on
failure)

BEST_EFFORT,
BREAK_ON_FAILU
RE

None

Compress Flag

Enumeration
Type

COMPRESSED,
COMPRESSED,
UNCOMPRESSED UNCOMPRESSED

None

Number of the RX Channel in the

Initial RTWP Adjusting

Interval Type

0~1

None

CHR Switch

Enumeration
Type

ON, OFF

byte

Timer_Idle. Length of the SSCOP

timer Timer_Idle specified in the
SAAL-related protocol. The value
of this parameter should be larger
than or equal to the value of
KATM.

100~65535

Interval Type

Interface Number

Interval Type

0~15

None

Interface Type

Enumeration
Type

PPP(PPP),
MPGRP(MLPPP
GROUP)

PPP, MPGRP

None

Enumeration
Type

75(the line
workmode is E1),
120(the line
workmode is E1),
100(the line
workmode is T1)

75, 120, 100

ohm

Enumeration
Type

GPSCARD (GPS
card clock source),
LINE(LINE clock
GPSCARD, LINE,
source), IPCLK(IP
IPCLK, PTP, PEER
clock source),
PTP(PTP clock
source), PEER

E1 or T1 line Impendance

Clock Source Type of the NodeB

None

Sub-Board Type of the E1/T1

Routine Test

Enumeration
Type

BASE_BOARD,
BASE_BOARD,
E1_COVERBOAR
None
E1_COVERBOARD
D

Cabinet No.

Enumeration
Type

MASTER(Master
cabinet)

MASTER

None

Cabinet No. of Power

Amplifier1:Power Amplifier refers
to the power amplify unit in RRU.

Enumeration
Type

MASTER(Master
cabinet)

MASTER

None

Cabinet No. of Power

Amplifier2:Power Amplifier refers
to the power amplify unit in RRU.

Enumeration
Type

MASTER(Master
cabinet)

MASTER

None

Operator Index

Interval Type

0~65535

None

Operator Name

String Type

A string of up to 31 A string of up to 31
bytes
bytes

None

Connection Type Value of the

Accepted Connection

Enumeration
Type

ALL(ALL Type)

None

ALL

Statistic Count

Cover Type of Sector

Interval Type

0~65535

Enumeration
Type

SAMEZONE
(Same Cover
SAMEZONE,
Type), DIFFZONE
DIFFZONE
(Different Cover
Type)

IP Address. The local IP cannot be

the same as the peer IP address.
The value range should meet the
following conditions: The IP
address is of legal A, B, or C type
but cannot be the reserved IP
address 0.x.x.x or 127.x.x.x. The
IP Address Type IP & ~mask cannot be 0, the IP &
mask cannot be 0, the IP & mask
+ ~mask cannot be 0xffffffff, and
the IP & ~mask + mask cannot be
0xffffffff. Note that "~mask"
indicates the complement on
mask.

0~65535

None

Cold Start Load Shutdown

Temperature of the NEMU

Interval Type

-40~0

degre
e

Flag for Setting the CM Control

Switch

Enumeration
Type

ON(turnon),
OFF(turnoff)

ON, OFF

None

Current DA

Interval Type

255~65520

None

Interval Type

255~65520

None

Installation Date

Interval Type

1~31

None

Start Time

Compound Type

Format:
YYYY&MM&DD

None

Lasting days

Interval Type

0~65535

None

Dead Band of the NCMU Heat

Control Delta Parameter

Interval Type

0~30

Celsi
us

Destination Cell ID

Interval Type

0~65535

None

The First Destination Cell ID

Interval Type

0~65535

None

The Second Destination Cell ID

Interval Type

0~65535

None

SASU DC Load

Interval Type

0~65535

0~65535*0.2,
Step:0.2

SASU DC Switch State

Enumeration
Type

BS (Supplied by
BS), UMTS
(Supplied by
UMTS), OFF
(OFF)

DC Upper Limit of the NPMU

AC/DC Voltage Alarm Threshold

Any Type

58.0~60.0

58.0~60.0,
Precision: 0.01

DC Lower Limit of the NPMU

AC/DC Voltage Alarm Threshold

Any Type

35.0 ~ 55.6

35.0~55.6,
Precision: 0.01

Delayed Discharge Test Time

Interval Type

1~60

Default Power Level; use it when

Sector Type is Distributed Sector.

(ALD)

Enumeration
Type

SINGLE_RET
(Single-antenna
Remote Electrical
Tilt), MULTI_RET
(Multi-antenna
Remote Electrical
Tilt)

AISG Protocl Version

Enumeration
Type

V1.1, V2.0_3GPP V1.1, V2.0_3GPP

None

Destination FACH Channel ID

Interval Type

0~255

None

Device Type

100~65534

SINGLE_RET,
MULTI_RET

0~255

None

The First Destination FACH

Channel ID

Interval Type

0~255

None

The Second Destination FACH

Channel ID

Interval Type

0~255

None

Local IP Address. The local IP

address can be [Link]. If the local
IP address is not [Link], it should
IP Address Type belong to legal A, B, or C type but
cannot be the reserved IP address
0.x.x.x or 127.x.x.x.

[Link]~255.255.255
None
.255

address should belong to legal A,
B, or C type but cannot be the
reserved IP address 0.x.x.x or
127.x.x.x. The parameter cannot
IP Address Type be equal to the other SCTP link IP
address. The parameter must be
the active interface address of this
board.

[Link]~255.255.255
None
.255

Max STAT Count, which indicates

the maximum number of list
elements in STAT PDU specified in Interval Type
SAAL-related protocol. It must be
an odd number.

3~65535

None

Max Poll Data Count, which

indicates the maximum number of
Interval Type
times of polling data transmissions
specified in SAAL-related protocol.

1~65535

None

Discharge Test Time Limit of the

Battery Capacity Test

Interval Type

1~100

None

Destination Port No.

Range Type

0~7

None

Destination Fraatm Link No.

Range Type

0~7

None

Destination Port No.

Range Type

0~7

None

Enumeration
Type

IMA(Bearing Port
Type is IMA),
UNI(Bearing Port
Type is UNI),
FRAATM(Bearing
Port Type is
FRAATM)

IMA, UNI, FRAATM None

Min Cell Rate

Interval Type

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

Range Type

Bearing Mode

Enumeration
Type

Next Hop IP. A valid IP address

must satisfy all the following
conditions:Legal A/B/C type IP
address. IP address can not be
[Link] and [Link].

IP Address Type -

[Link]~255.255.255
None
.255

Timer_No_Response. Length of
the SSCOP timer timer
Timer_No_Response specified in
the SAAL-related protocolIt.

Interval Type

101~65535

Refers to OM priority

Interval Type

0~63

None

Dynamic Code Resource

Distribuiton Switch of HSDPA

Enumeration
Type

OPEN, CLOSE

None

ATM, IPV4

None

0 None

ATM, IPV4

None

FIXED (Fixed
transmit power),
RNC_BASED
(Dynamic transmit
power control
based on the Pilot
of DPCH or FDPCH),
FOLLOW_TPC
(Dynamic transmit
power control
based on the TPC
of DPCH or FDPCH),
CQI_BASED
(Dynamic transmit
power control
based on CQI),
HSSCCH_BASED
(Dynamic transmit
power control
based on HSSCCH)

FIXED,
RNC_BASED,
FOLLOW_TPC,
CQI_BASED,
HSSCCH_BASED

None

Whether to set the E-AGCH power Enumeration

control parameters or not
Type

NO, YES

None

This parameter specifies the power

offset of the E-AGCH from the
Interval Type
power of the Common Pilot
Channel.

-350~150

-35~15 dB, step: 0.1

dB
dB

E-AGCH Power Offset; An offset is

added to the power of the current
2 ms sub-frame based on the TPC
field power of its corresponding
Interval Type
DPCCH. This offset is related to
the Signal-to-Noise Ratio
difference.

0~255

-32~31.75 dB, step:

dB
0.25 dB

Peak cell rate of ATM channel.

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

E-AGCH power control policy

Enumeration
Type

Interval Type

End Date of the E1/T1 Routine

JAN(January),
FEB(February),
MAR(March),
APR(April),
MAY(May),
JUN(June),
JUL(July),
AUG(August),
SEP(September),
OCT(October),
NOV(November),
DEC(December)

JAN, FEB, MAR,

APR, MAY, JUN,
JUL, AUG, SEP,
OCT, NOV, DEC

None

End Month of the Daylight Saving

Time

Transport Encryption Mode of the

FTPS Client Parameter

Enumeration
Type

Auto(Automatic),
Plaintext(Plaintext), Auto, Plaintext,
Encrypted(SSL
Encrypted
encrypted)

None

End Voltage Of Battery Capacity

Test

Interval Type

1.70~2.20

1.70~2.20,
Precision: 0.01

V/cell

Peer IP Address, which is of legal

A, B, or C type but cannot be the
reserved IP address 0.x.x.x or
127.x.x.x. The IP & ~mask cannot
be 0, the IP & mask cannot be 0,
IP Address Type the IP & mask + ~mask cannot be
0xffffffff, and the IP & ~mask +
mask cannot be 0xffffffff.
Note that "~mask" indicates the
complement on the mask.

[Link]~255.255.255
None
.255

Peer IP Mask. The IP & ~mask

cannot be 0, the IP & mask cannot
be 0, the IP & mask + ~mask
cannot be 0xffffffff, and the IP &
~mask + mask cannot be 0xffffffff. IP Address Type Note that "~mask" indicates the
complement on the mask. The
mask in binary allows no "0" before
"1" or "1" after "0".

[Link]~255.255.255
None
.255

End Time of the Daylight Saving

Time (At a Non-DST).

Daylight Saving Time

Enumeration
Type

FIRST(First),
SECOND(Second), FIRST, SECOND,
THIRD(Third),
THIRD, FOURTH,
FOURTH(Fourth), LAST
LAST(Last)

None

Float-Charging Voltage of the

NPMU

Any Type

43.2~57.6

43.2~57.6,
Precision: 0.1

Peer UDP Port is one of the

parameters between NodeB and
RNC.

Interval Type

1024~3584

None

PLR Appearing Threshold

Interval Type

0~100

0~0.1, Step: 0.001

None

End Week of the Daylight Saving

Time

Packet Loss Rate Disappearing

Threshold, and its value shall not
be larger than the PLRAT value.

Interval Type

0~100

0~0.1, Step: 0.001

None

Resource Group ID

0~3

None

Interval Type

0~3

Route type option

Enumeration
Type

NEXTHOP(IP
address of the next NEXTHOP, IF
hop), IF(Out port)

None

Rx Bandwidth of this resource

group

Interval Type

32~15800

Bearing Service Type. When the

value is CBR or UBR, only PCR
needs to be set; when the value is
Enumeration
RTVBR or NRTVBR, both PCR
Type
and SCR need to be set; when the
value is UBR+, both PCR and
MCR need to be set.

CBR(Constant Bit
Rate),
RTVBR(Real Time
Variable Bit Rate),
NRTVBR(Non-Real CBR, RTVBR,
Time Variable Bit
NRTVBR, UBR,
Rate),
UBR+
UBR(Unspecified
Bit Rate),
UBR_PLUS(Unspe
cified Bit Rate+)

TMA Gain

Interval Type

0~255

0~255*0.5, Step:0.5 dB

Antenna Gain

Range Type

0~255

0~25.5, Step:0.1

Antenna Gain

Range Type

0~255

0~25.5, Step:0.1

Antenna Gain

Range Type

0~255

0~25.5, Step:0.1

Antenna Gain

Range Type

0~255

0~25.5, Step:0.1

the Local Cell

Enumeration
Type

FALSE (Not
Support), TRUE
(Support)

FALSE, TRUE

None

Humidity Lower Limit

Interval Type

5.00~95.00

Local Cell Inner Handover Radius

Interval Type

0~200000

Optical Port Number of the Head

Interface Board

Interval Type

0~2(WBBPa),
0~5(WBBPb)

0~5

None

2~3

None

Slot Number of the Head Interface

Interval Type
Board
Number of the Head Subrack

Interval Type

High Temperature Critical Point of

the NCMU Heat Control Delta
Parameter

Interval Type

-99~70

0 None

-99~70

Celsi
us

Heater Close Temperature of the

NCMU Heater Parameter

Interval Type

-99~40

Celsi
us

High Temperature at the Delta Air

0~500, Step: 5ms

This parameter indicates the

duration of Timer.

Interval Type

1~20

Transmission Link Fault Recover

Switch

Enumeration
Type

DISABL(Disabl),
ENABLE(Enable)

DISABLE, ENABLE None

Installer's ID

String Type

None

A string of up to 5
bytes

None

Interval Type

ETH:32~100000
ETH:32~100000
MPGRP:32~31744
MPGRP:32~31744 kpbs
ETHTHK:32~1000
ETHTHK:32~100000
00

Committed Information Rate,

which is related to a specific
physical interface but lower than
the physical interface rate.

None

Committed Information Rate,

which is related to a specific
physical interface but lower than
the physical interface rate.

Interval Type

ETH:32~100000
ETH:32~100000
MPGRP:32~31744
MPGRP:32~31744 kbps
ETHTHK:32~1000
ETHTHK:32~100000
00

Duplex. Interface duplex mode.

The value can be forced fullduplex. If the value is null, the
duplex mode is not modified.

Enumeration
Type

FULL(Full-Duplex) FULL

IP Address of the NTP Server

IP Address Type None

Unicast address in
[Link]~255.255.255 None
.254

IP address of the FTP Serve

IP Address Type None

[Link]~255.255.255
None
.255

None

Frame Structure. If this parameter

Enumeration
is not specified, the original value
Type
is kept.

E1_DOUBLE_FRA
ME (Double
framtype for E1),
E1_CRC4_MULTI_
FRAME (CRC4
Mutipiy framtype
for E1),
T1_SUPER_FRAM
E (Super framtype
for T1),
T1_EXTENDED_S
UPER_FRAME
(Extended Super
framtype for T1)

Function. DISABLE means

disabling the LR settings on the
Enumeration
port. ENABLE means enabling the Type
LR settings on the port.

DISABLE(Disable
the LR settings on
the port),
DISABLE, ENABLE None
ENABLE(Enable
the LR settings on
the port)

E1_DOUBLE_FRAM
E,
E1_CRC4_MULTI_F
RAME,
None
T1_SUPER_FRAME
,
T1_EXTENDED_SU
PER_FRAME

Auto or Manual IP Clock

Synchronization Mode

Enumeration
Type

AUTO(Auto),
AUTO, MANUAL
MANUAL(Manual)

This parameter indicates whether

to add the VLAN tag. DISABLE
means not adding the VLAN tag,
and ENABLE means adding the
VLAN tag.

Enumeration
Type

ENABLE(Insert
VLAN Tag),
DISABLE(not
Insert VLAN Tag)

None

ENABLE, DISABLE None

Enumeration
Type

NOLOOP
(loopback mode is
cancelled.),
LOCAL (Local end
loopback, which
means that data
goes through a
loop within a
NodeB instead of
through E1 cables.
It is used to check
whether the
NOLOOP, LOCAL,
transmission chips REMOTE
are normal..),
REMOTE (Remote
loopback, which
means that data
goes through a
loop of E1 cables
between NodeB
and RNC. it is used
to check whether
the E1 cables are
normal.)

Loopback Mode of IP Level

Enumeration
Type

NOLOOP (No
loop), ALL (ALL IP
Address), IPADDR
(Appointed IP
Address),
IPADDRADDUDPP
ORT (Appointed IP
Address and UDP
port No.)

NOLOOP,
ALLLOOP,
ONLYIPADDR,
None
IPADDRANDUDPPO
RT

Load Overtemperature Shutdown

Flag

Enumeration
Type

ENABLE,
DISABLE

ENABLE, DISABLE

None

Automatic Alarm Handling Limit

After the VSWR Alarm

Interval Type

15~30

None

Lower Threshold of the Input

Voltage Alarm of the NEMU

Any Type

36.00~43.00

36.00~43.00,
Precision: 0.1

Enumeration
specified, the original value is
Type
kept.

AMI(AMI code for

E1or T1),
B8ZS(B8ZS code
for T1)

AMI, B8ZS

None

Loopback Time

1~60

min

Loopback Mode

Enumeration
Type

Range Type

Peer IP Address, which is of legal

Scramble Mode

Enumeration
Type

[Link]~255.255.255
None
.255

ENABLE(Scramble
, it must be
ENABLE, when
E1/T1 adopts AMI ENABLE, DISABLE None
mode),
DISABLE(No
scramble)

Speed mode. The value can be

forced 10 Mbps, forced 100 Mbps,
or auto-negotiated. It must be
consistent with the peer IP
Enumeration
interface. If the value is null, the
Type
speed is not modified.
Value range: 10M (Forced 10
Mbps), 100M (Forced 100 Mbps),
AUTO (Auto-negotiation).

10M(Forced
10Mbps),
100M(Forced
100Mbps),
AUTO(Autonegotiation)

Ethernet electrical
port: 10M, 100M,
AUTO; Ethernet
optical port: 100M

None

Interval Type

0~3

None

0~3

Local Cell ID

Interval Type

0~268435455

None

VLAN ID

Interval Type

1~4094

None

VLAN Priority, which indicates the

Interval Type
priority level of VLAN

0~7

None

Maximum number of transmission

units. It is the maximum length of
the IP packets on the port. If this
parameter is not specified, the
MTU is not modified.

Interval Type

46~1500

None

Minimum value of the timer for

disabling the cell transmitter

Interval Type

0~255

min

Load Shutdown Flag of the NEMU

Enumeration
Type

ENABLE,
DISABLE

ENABLE, DISABLE

None

35.0~55.6

35.0~55.6,
precision:0.1

DISABLE,
ENABLE

DISABLE, ENABLE None

Load Shutdown Voltage Of NEMU Any Type

Address & Control Field Compress

Enumeration
Type

Low Temperature Critical Point of

the NCMU Heat Control Delta
Parameter

Interval Type

-99~70

Celsi
us

Load Shutdown Temperature

Interval Type

55~70

None

-40~10

Celsi
us

ON, OFF

None

Low Temperature Threshold of the

Interval Type
NCMU

Manual Touchoff Switch

Enumeration
Type

Any Type

A hexadecimal
string of 40
characters
(excluding H').
Format:
H'3902030405060
708090001020304
050607080900.
The ATM address
must start with 39,
45, or 47 to
comply with the
protocols.

A hexadecimal string
of 40 characters
(excluding H').
Format:
H'390203040506070
8090001020304050 None
607080900. The
ATM address must
start with 39, 45, or
47 to comply with the
protocols.

ATM Address

Any Type

A hexadecimal
string of 40
characters
(excluding H').
Format:
H'3902030405060
708090001020304
050607080900.
The ATM address
must start with 39,
45, or 47 to
comply with the
protocols.

A hexadecimal string
of 40 characters
(excluding H').
Format:
H'390203040506070
8090001020304050 None
607080900. The
ATM address must
start with 39, 45, or
47 to comply with the
protocols.

Adjacent Node ID

Interval Type

0~31

E-AGCH Max Power

Interval Type

-350~150

-35~15 dB, step: 0.1

dB
dB

Authentication

Enumeration
Type

NONAUTH(no
authentication),
PAP(PAP
authentication),
CHAP(CHAP
authentication)

NONAUTH, PAP,
CHAP

Auto Switch to Master Address.

When the master address is
restored, the service can be
switched to the master address
automatically.

Enumeration
Type

ENABLE,
DISABLE

DISABLE, ENABLE None

NCP/CCP Bearing Type, which

indicates whether the Resource
Group Bearing Type is configured
on the IP link or the ATM link.

Enumeration
Type

ATM, IPV4

None

Max RRU Output Power

Interval Type

0~500

0~50 dB, step: 0.1

ATM Address, a hexadecimal

string of 40 characters (excluding
H').

None

Resource Group Bearing Type

Enumeration
Type

IPV4

None

Bearing Type, which indicates

whether the Resource Group
Bearing Type is configured on the
IP link or the ATM link.

Enumeration
Type

ATM, IPV4

None

Cell Delay Variation Tolerance

Interval Type

1024~13300000

102.4~1330000,
Step: 0.1us

Client IP Address, which must be

the IP address of ETHPORT.

IP Address Type -

For the different links in a group

may go through different
transmission network, the links
may use the different synchronize
source. In this case, the clock
mode of the IMA group should be
ITC.

Enumeration
Type

ITC(Independent
Transmit Clock),
CTC(Common
Transmit Clock)

ITC, CTC

E-AGCH Min TX Power

Interval Type

-350~150

-35~15 dB, step: 0.1

dB
dB

CCP Port No.. It is valid when

NCP/CCP Port Type is CCP.

Range Type

0~65535

None

Statistic Periods

Interval Type

0~65535

None

0~4294967295

0~4294967.295,
precision:0.001

None

NCP, CCP

None

Measurement Lower Limit of the

NEMU Standby Analog Value Input Any Type
Parameters

[Link]~255.255.255
None
.255

None

NCP/CCP Port Type

Enumeration
Type

NCP(NCP port),
CCP(CCP port)

SASU Mode

Enumeration
Type

NORMAL (Normal
Mode), BYPASS NORMAL, BYPASS
(Bypass Mode)

None

TMA Mode

Enumeration
Type

NORMAL (Normal
Mode), BYPASS NORMAL, BYPASS
(Bypass Mode)

None

Enumeration
Type

MANUAL, FREE

None

Work Mode

Enumeration
Type

OFF(Disabled
mode),
DEFAULT(System
default mode),
CUSTOM(Userdefined mode)

None

Antenna Model No.

String Type

None

A string of up to 15
bytes

None

4~100

The identifier, the parameter can

not include the letters of '<', '>',
'?', '!', ''', '\' and '"'.

0~64 characters

None

System Clock Working Mode

String Type

DHCP Server IP Address

IP Address Type -

Differentiated Services Code Point.

Interval Type
Refer to [MML]SET DIFPRI[/MML].

0~63

[Link]~255.255.255
None
.255
0~63

None

Destination IP Address. This

String Type

None

A string of up to 31
characters

None

Name of the RET Antenna of

Which the Downtilt Needs Setting

String Type

None

A string of up to 31
characters

None

Device Name of the Antenna Line

Device (ALD)

String Type

None

A string of up to 31
characters.

None

Device Name of the Smart TowerString Type

Mounted Amplifier (STMA)

None

A string of up to 31
characters.

None

Destination Resource Group ID

0~3

None

Interval Type

Destination E1/T1 Time Slot No. A

map of the timeslot, denoted in
binary format.
Enumeration
If a timeslot is selected, it
Type
indicates that the timeslot is used;
otherwise, it indicates that the
timeslot is not used.

TS1, TS2, TS3,

TS4, TS5, TS6,
TS7, TS8, TS9,
TS10, TS11,
TS12, TS13,
TS14, TS15,
TS16, TS17,
TS18, TS19,
TS20, TS21,
TS22, TS23,
TS24, TS25,
TS26, TS27,
TS28, TS29,
TS30, TS31

A map of the
timeslot, denoted in
binary format. If a
timeslot is selected,
it is crossed to the
timeslot with the
same No. of E1 0.
Or else, it is not
crossed. Select
"SELECT ALL" or
"CLEAR ALL" to
select or not select
all the timeslots. In
None
E1 mode,
TS1~TS31
respectively
corresponds to
timeslots 1~31.
Timeslots 0 cannot
be configured. In T1
mode, TS1~TS24
respectively
corresponds to
timeslots 1~24, and
the other timeslots
are unavailable.

Destination Port VCI

Interval Type

32~511

None

Destination Port VPI

Interval Type

0~255

None

A flag, which indicates whether

the transmission channel is the
master one or the slave one.

Enumeration
Type

MASTER(Master
Channel),
SLAVE(Slave
Channel)

MASTER, SLAVE

None

FPMUX Switch, which is a switch

to enable or disable FP
multiplexing.

Enumeration
Type

DISABLE(Disable
FP multiplexing),
ENABLE(Enable
FP multiplexing)

DISABLE, ENABLE None

Fraatm Link No.

Interval Type

0~7

None

E-HICH power control policy for

non-service radio link set

Enumeration
Type

Whether to set the E-HICH power

Enumeration
control parameters for non-service
Type
radio link set or not
This parameter specifies the power
offset of the E-HICH non-serving
Interval Type
RLS from the power of the
Common Pilot Channel.
E-HICH Power Offset for Nonservice Radio Links Set. An offset
is added to the power of the
current 2 ms sub-frame based on
Interval Type
the TPC field power of its
corresponding DPCCH. This offset
is related to the Signal-to-Noise
Ratio difference.

E-RGCH power control policy for

non-service radio links

Enumeration
Type

Whether to set the E-RGCH power

Enumeration
control parameters for non-service
Type
radio links or not
This parameter specifies the power
offset of the E-RGCH non-serving
Interval Type
RL from the power of the Common
Pilot Channel.
E-RGCH Power Offset for Nonservice Radio Links; an offset is
added to the power of the current
2 ms sub-frame based on the TPC
Interval Type
field power of its corresponding
DPCCH. This offset is related to
the Signal-to-Noise Ratio
difference.

FIXED (Fixed
transmit power),
RNC_BASED
(Dynamic transmit
power control
based on the Pilot
FIXED,
of DPCH or FRNC_BASED,
DPCH),
FOLLOW_TPC
FOLLOW_TPC
(Dynamic transmit
power control
based on the TPC
of DPCH or FDPCH)

None

Celsi
us

Normal Temperature at the Delta

Air Outlet and Inlet of the NCMU
Heat Control Delta Parameter

0~30

Celsi
us

Interval Type

Object Alarm ID

Interval Type

1~32000

None

Object Number

Interval Type

0~254

None

Type of Objects Needed Shielding

Enumeration
Type

ALL(ALL),
BRD(Board),
E1/T1(E1/T1),
ALL, BRD, E1/T1,
E1/T1OnChannels E1/T1OnChannelsS None
Subbrd(E1/T1 On ubbrd
Channels
Subboard)

Overcurrent Alarm Clearance

Threshold of the Antenna Line
Device (ALD)

Interval Type

0~1000

Tx Frame Length. A longer Tx

Frame Length brings about more
efficient data transmission but
lower sensitivity to data
transmission errors. The default
value is recommended.

Enumeration
Type

D32(Tx Frame
Length D32),
D64(Tx Frame
Length D64),
D128(Tx Frame
Length D128),
D256Tx Frame
Length D256)

D32, D64, D128,

D256

None

On/Off Status of the Environment

Devices

Enumeration
Type

ON, OFF

ON~0 OFF~1

None

Overcurrent Alarm Occurrence

Threshold Of ALD(Antenna Line
Device)

Interval Type

0~1000

Operating Sort

Enumeration
Type

DEV, OPE

None

Enumeration
Type

V1.1, V2.0_3GPP V1.1, V2.0_3GPP

None

to add the VLAN tag. DISABLE
means not adding the VLAN tag,
and ENABLE means adding the
VLAN tag.

Enumeration
Type

ENABLE(Insert
VLAN Tag),
DISABLE(not
Insert VLAN Tag)

ENABLE, DISABLE None

IP Address. The local IP cannot be

IP Header Compress. DISABLE

means that the IP header is not
expected to be compressed from Enumeration
the peer end. ENABLE means that Type
the UDP/IP header is expected to
be compressed from the peer end.

DISABLE(The IP
header is not
expected to be
compressed from
the peer),
ENABLE(The
UDP/IP header is
expected to be
compressed from
the peer)

Local IP Mask. If the IP mask is

[Link], it indicates that the IP
mask must be negotiated; if the IP
mask is not [Link], the following
conditions must be met: The IP &
~mask cannot be 0, the IP & mask
cannot be 0, the IP & mask +
IP Address Type ~mask cannot be 0xffffffff, and the
IP & ~mask + mask cannot be
0xffffffff. Note that "~mask"
indicates the complement on the
mask. The mask in binary does not
allow "0" before "1", or "1" after
"0".

[Link]~255.255.255
None
.255

DISABLE, ENABLE None

[Link]~255.255.255
None
.255

Join Resource Group

Enumeration
Type

DISABLE(Not Join
in Transmission
Resource Group),
DISABLE, ENABLE None
ENABLE(Not Join
in Transmission
Resource Group)

Link No.

Interval Type

0~1

None

0~63

None

No. of the SAAL link where the CP

Interval Type
is located.

SCTP Link No.

Interval Type

0~19

None

No. of the SAAL link where the

AAL2 node is located.

Interval Type

0~63

None

Local IP Address. The parameter

must meet all the following
conditions:
The local IP address can be
[Link]. If it is not [Link], the IP
address is of legal A, B, or C but
cannot be the reserved IP address
0.x.x.x or 127.x.x.x.
The IP & ~mask cannot be 0, the
IP & mask cannot be 0, the IP &
IP Address Type mask + ~mask cannot be 0xffffffff,
and the IP & ~mask + mask cannot
be 0xffffffff.
Note that "~mask" indicates the
complement on the mask. If the IP
address is [Link], it indicates that
the IP address must be negotiated;
if the IP address is not [Link], it
cannot be the same as the peer IP
address.

[Link]~255.255.255
None
.255

Port Number of the RHUB Where

the Pico RRU is Located

Interval Type

0~7

Password Enabled State of the

Private Key File

Enumeration
Type

DISABLE(Disable),
Disable, Enable
ENABLE(Enable)

None

Local SCTP Port, which is one of

the parameters between NodeB
and RNC.

Interval Type

1024~65535

Interval Type

0~35

None

Port No.

Range Type

0~7

None

Port No.

Providing the FTP Services

Interval Type

21~65535

None

Multi Class PPP. DISABLE means

Enumeration
not using MCPPP; ENABLE
Type
means using MCPPP.

DISABLE(not use
MCPPP),
ENABLE(use
MCPPP)

DISABLE, ENABLE None

Min Cell Rate

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

Interval Type

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

1~8

Auxiliary Power System Type

Enumeration
Type

APM100,
APM100, APM200,
APM200, APM30,
APM30, OMB
OMB

None

BOOL(Boolean
port),
None
VALUE(Analog port)

None

Name of the Public Key Certificate

String Type
File

None

A string of up to 64
characters

None

MLPPP Packets Discard Alarm

Disappear Threshold

Interval Type

0~100

0~0.1, Step: 0.001

None

Private Key Password

Password Type None

A string of up to 64
characters

None

User password for login

Password Type None

0~16 characters,
excluding <, >, !, ?, : None
in the password

Power Margin Ratio, to prevent

the total power from exceeding the Interval Type
100% power margin in 2 ms.

0~100

It is power setting mode of the

RRU.

Enumeration
Type

DEFAULT(Use the
default power),
ABSOLUTE(Use
DEFAULT,
this absolute power ABSOLUTE
value for power
amplifier)

None

Power Supply Switch of the

Antenna Line Device (ALD)
System

Enumeration
Type

ON, OFF

Maximum Receive Unit

Interval Type

128~1500

byte

RET Type

Enumeration
Type

DUAL

None

RF Desensitivity of the RRU

Interval Type

0~10

None

It indicates whether you are

deleting the board from the
resource group or add a board to
the resource group.

Enumeration
Type

ADDULPUNIT,
DELULPUNIT(MO
D ULGROUP)
ADDDLPUNIT,
DELDLPUNIT(MO
D DLGROUP)

ADDULPUNIT,
DELULPUNIT(MOD
ULGROUP)
None
ADDDLPUNIT,
DELDLPUNIT(MOD
DLGROUP)

Rollback Mode for Activating the

Baseline

Enumeration
Type

ENABLE (Support
rollback),
ENABLE, DISABLE None
DISABLE (Not
support rollback)

Remote Cell Group Index of Local

Interval Type
Cell

0~4294967295

None

Remote Mode of the Local Cell

Enumeration
Type

FALSE (Not
Support), TRUE
(Support)

FALSE, TRUE

None

RRU Name

String Type

None

A string of up to 64
characters

None

PPP MuxCP. DISABLE means

disabling the local protocol;
Enumeration
ENABLE means enabling the local Type
protocol.

DISABLE(Local
protocol disable),
ENABLE(Local
protocol enable)

DISABLE, ENABLE None

Name of the Root Certificate File

String Type

None

A string of up to 64
characters

Enumeration
Type

UNSYNC (use part

of the sector
RRUs), SYNC
UNSYNC, SYNC
(use all of the
sector RRUs)

None

Enumeration
Type

UO (UMTS ONLY),
G/U (G/U DUAL
MODE(Only MRRU UO~128 G/U~192
support)), GO
GO~64
(GSM ONLY(Only
MRRU support))

None

Enumeration
Type

CODE_PRI(Code
Priority:refers to
power limited cell),
POWER_PRI(Pow CODE_PRI,
er Priority:refers to POWER_PRI,
None
code limited cell), POWERCODE_BAL
POWERCODE_BA
L(Balance between
Code and Power)

Mode of RRU used in this local

cell; if Sector Type is Distributed
Sector, just use the sector type; if
the mode is SYNC, the local cell
uses all the RRUs in the sector
where the local cell is; if the mode
is UNSYNC, the local cell uses
specified RRUs.

RRU Work Standard

Resource Allocate Method of

HSDPA

None

Next Hop IP Address. A valid IP

address must meet all the
following conditions:
The IP address is of legal A, B, or IP Address Type C type.
The IP address cannot be [Link]
or [Link].

[Link]~255.255.255
None
.255

Next Hop IP. A valid IP address

must satisfy all the following
conditions:Legal A/B/C type IP
address. IP address can not be
[Link] and [Link].

[Link]~255.255.255
None
.255

IP Address Type -

Resource Limiting Switch of

HSDPA

Enumeration
Type

OPEN (OPEN),
CLOSE (CLOSE)

OPEN, CLOSE

None

NodeB Resetting Mode After the

Enumeration
Download of the Configuration File Type

LATER(Later
reset),
IMMEDIATELY(Im
mediately reset)

LATER,
IMMEDIATELY

None

Tscross No.

Interval Type

0~15

None

Tree link PVC No.

Interval Type

0~65535

None

RRU Type

Enumeration
Type

MRRU, RHUB,
PRRU, WRFU

None

NodeB IP Address, which

indicates the NodeB IP address of
the IP port. It can be classified into
the following types:
When the NodeB IP address is
configured by the link Layer, the
configured address can be used.
IP Address Type When the DEVIP is configured,
the DEVIP address can be used.
When the NodeB IP address is
obtained by the link layer
negotiation, the negotiated
address cannot be used but can
be configured as [Link].

[Link]~255.255.255
None
.255

Value of the RTWP Initial Adjusting Interval Type

-130~130

-13~13, step 0.1

LOCAL(End
Node),
HUB(Switching
Node)

LOCAL, HUB

None

Node Type

Enumeration
Type

Resource Allocate Rule of

Baseband

Enumeration
Type

Node Type

Enumeration
Type

Index of the WRFU/RRU RX

Channel

Interval Type

RX Unit Number of the

WRFU/RRU
RX Unit Switch of the WRFU/RRU

PERFFIRST
(Handover
performance first
mode),
CAPAFIRST
(Capacity first
mode)
LOCAL(End
Node),
HUB(Switching
Node),
ADJNODE(Adjace
nt Node)

PERFFIRST,
CAPAFIRST

None

LOCAL, HUB,
ADJNODE

None

0~1

None

Interval Type

0~1

None

Enumeration
Type

ON (Switch on),
OFF (Switch off)

ON, OFF

None

Path Check. DISABLE means not

using PING to detect the path
Enumeration
state; ENABLE means using PING Type
to detect the path state.

DISABLE,
ENABLE

DISABLE, ENABLE None

IP Path ID

Interval Type

0~65535

None

AAL2 Path ID

Interval Type

1~4294967295

None

Peak cell rate of ATM channel

Interval Type

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

Status of the Sub-Board

Enumeration
Type

YES (has a
subboard), NO
YES, NO
(has no subboard)

None

Sub-Board Type

Enumeration
Type

UAEC, UPEC,
UUAS, UQEC,
UEOC

None

UAEC, UPEC,
UUAS, UQEC,
UEOC

Enumeration
Type

BASE_BOARD(ba
se board),
E1_COVERBOAR
D(E1/T1 cover
board),
BACK_BOARD(ba
ck board)

BASE_BOARD(Base
Board),
E1_COVERBOARD(
None
E1 Coverboard),
BACK_BOARD(Back
Board)

Enumeration
Type

BASE_BOARD(ba
se board),
E1_COVERBOAR
D(E1/T1 cover
board)

BASE_BOARD(Base
Board),
None
E1_COVERBOARD(
E1 Coverboard)

Subboard Type

Enumeration
Type

BASE_BOARD(ba
se board),
E1_COVERBOAR
D(E1/T1 cover
board),
BACK_BOARD(ba
ck board)

BASE_BOARD(Base
Board),
E1_COVERBOARD(
None
E1 Coverboard),
BACK_BOARD(Back
Board)

The power of the HS-SCCH is an

offset in dB to the transmit power
of the PCPICH. The power of the
HS-SCCH is valid only when the
power of the HS-SCCH is
controlled by predefined values.
The power is a fixed value.

Interval Type

0~80

-10~10 dB, step:

0.25 dB

Subboard Type

Whether to set the Mac-e schedule Enumeration

parameters or not
Type

NO, YES

None

Source logical Cell ID

Interval Type

0~65535

None

Interval Type

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

Peak cell rate of ATM channel

Peer IP Address, which is of legal

[Link]~255.255.255
None
.255

Peer SCTP Port is one of the

parameters between NodeB and
RNC.

Interval Type

1024~65535

Protocol Field Compress.

DISABLE means not being
compressed; ENABLE means
being compressed.

Enumeration
Type

DISABLE,
ENABLE

DISABLE, ENABLE None

ML PPP Link No.

Interval Type

0~15

None

Route Preference

Interval Type

40.00~54.00

40.00~54.00,
Precision: 0.01

None

Simple Discharge Time Limit of the

Interval Type
Battery Capacity Test

1~240

min

Password. It is mandatory if AUTH

Password Type 0~16 characters
is not NONAUTH.

0~16 characters

None

It is sequentially numbered in the

site. Up to six sectors can be
configured to one site.

Interval Type

0~5

None

Sector Number

Interval Type

0~5

None

The value range is

30~20999 when
rate unit is kbps;
The value range is
71~49526 when
rate unit is cell per
second;

The value range is

30~20999 when rate
unit is kbps;
kbps
The value range is
or
71~49526 when rate cell/s
unit is cell per
second;

Receive Cell Rate. The RCR value

must be equal to the DL bandwidth
configured at the RNC. When the
AAL2PATH is configured at the
NodeB, the RCR will be used as
the receive bandwidth, which is an Interval Type
important parameter in the
algorithm for flow control. Whether
the RCR is configured correctly or
not will affect the result of the
algorithm for flow Control.

1~240

It indicates type of the sector.

Enumeration
Type

REMOTE_SECTO
R (Remote Sector), REMOTE_SECTOR,
None
DIST_SECTOR
DIST_SECTOR
(Distributed Sector)

Sector ID

String Type

None

A string of up to 4
bytes

None

Sector ID

String Type

None

A string of up to 32
bytes

None

E-HICH power control policy for

service radio link set

Enumeration
Type

Whether to set the E-HICH power

Serial Number

String Type

None

A string of up to 64
characters

None

Antenna Serial No.

String Type

None

A string of up to 17
bytes

None

IP Address of the FTP Server

IP Address Type None

Unicast address in
[Link]~255.255.255 None
.254

Source FACH Channel ID

Interval Type

0~255

Shield Flag to Be Set

Enumeration
Type

UNSHIELDED(Not
Shielded),
UNSHIELDED,
SHIELDED(Shield SHIELDED
ed)

None

RestartTimer. Timer for ConfigureRequest or Terminate-Request

Interval Type
packets.

1~65535

E-HICH Power for Single Radio

Link

Interval Type

-350~150

-35~15 dB, step: 0.1

dB
dB

IP address bearing traffic at the

RNC.

Start Month of the Daylight Saving Enumeration

Time
Type

Slot No.

Interval Type

0~7, 16, 18~19

None

Slot No.

Range Type

0~7

None

Slot No.

Range Type

0~7

None

Slot No. of Power Amplifier1:Power

Amplifier refers to the power
Interval Type
amplify unit in RRU.

0 None

Slot No. of Power Amplifier2:Power

Amplifier refers to the power
Interval Type
amplify unit in RRU.

0 None

Slot No. of RRU Begin

Interval Type

0 None

Synchronization Period of the

SNTP Client Parameters

Interval Type

1~525600

min

Resource Group ID

Interval Type

0~3

None

Speed Rate of High Speed Local

Cell

Enumeration
Type

250 (250km/h),
400 (400km/h),
500 (500km/h)

250, 400, 500

km/h

State of the Supported Firewall

Enumeration
Type

No, Yes

None

Source Port No.

Range Type

0~7

None

Source Fraatm Link No.

Range Type

0~7

None

Source Port No.

Range Type

0~7

None

Source Port Type

Enumeration
Type

Expected Rx Switch, if it is empty,

Enumeration
the Rx Expected Trace Byte
Type
Setting will not be changed.

IMA(Bearing Port
Type is IMA),
UNI(Bearing Port
Type is UNI),
FRAATM(Bearing
Port Type is
FRAATM)

IMA, UNI, FRAATM None

DISABLE(Disable),
DISABL, ENABLE
ENABLE(Enable)

None

Source Subboard Type

Enumeration
Type

BASE_BOARD(ba
BASE_BOARD
se board)

Source Subboard Type

Enumeration
Type

E1_COVERBOAR
D(E1/T1 cover
E1_COVERBOARD None
board)

Source Slot No.

Range Type

0~7

None

Source Slot No.

Range Type

0~7

None

Source Subrack No.

Range Type

Route type option

Enumeration
Type

NEXTHOP(IP
address of the next NEXTHOP, IF
hop), IF(Out port)

0 None

None

Rate unit

None

Expected Rx Type

Enumeration
Type

TRACE_1BYTE(O
ne byte type),
TRACE_1BYTE,
TRACE_16BYTE(1
TRACE_16BYTE,
6 byte CRC type),
TRACE_64BYTE
TRACE_64BYTE(6
4 Byte type)

Expected Rx Information

Any Type

0~64 characters

None

Expected Rx Procotol Version.

According to the Second Revision
of ITU-T 3/G.831, the trace
message will be padded with T.50
"NUL" character to get a maximum
available byte character string. For
Enumeration
interworking with equipment
Type
developed prior to this version of
protocol that may use the T.50
space as a padding character, new
equipment should be able to
generate T.50 "SPACE" padding
characters as an option.

REVISION_2ND(S
econd Revision.
Padding with T.50
"NUL"),
REVISION_2ND,
EARLIER_VER(Pri EARLIER_VER
or to Second
Revision. Padding
with T.50 space)

None

SAAL Link No.

Interval Type

0~63

None

Interval Type

The value range is

30~6759 when rate
unit is kbps;
The value range is
71~15942 when
rate unit is cell per
second;

The value range is

30~6759 when rate
unit is kbps;
kbps
The value range is
or
71~15942 when rate cell/s
unit is cell per
second;

Sustain Cell Rate

Start Time of the Daylight Saving

Time (At a Non-DST).

Compound Type None

HOUR , MIN , SEC None

Start Time of the E1/T1 Routine

Test

Compound Type None

Format:HH&MM&SS None

Sustain Cell Rate

Interval Type

The value range is

30~6759 when rate
unit is kbps;
The value range is
71~15942 when
rate unit is cell per
second;

The value range is

30~6759 when rate
unit is kbps;
kbps
The value range is
or
71~15942 when rate cell/s
unit is cell per
second;

It is the number of the site.

Interval Type

0~4294967295

None

Site Number

Interval Type

0~4294967295

None

Site Name

String Type

None

A string of up to 31
bytes

None

Scramble Mode

Enumeration
Type

ENABLE(Scramble
, it must be
ENABLE, when
E1/T1 adopts AMI ENABLE, DISABLE None
mode),
DISABLE(No
scramble)

SCTP Link No.

Interval Type

0~19

None

Subunit Number of the Antenna

Line Device (ALD)

Interval Type

1~6

None

ON (Need to be
synchronized),
OFF (Not need to
be synchronized)

ON, OFF

None

Switch of the Time Synchronization Enumeration

of the SNTP Client Parameters
Type

Second local IP address of SCTP

association. This parameter is one
of those between NodeB and
RNC. This parameter must meet
the following conditions:
This parameter can be set to
[Link]. If it is not set to [Link],
the IP address is of legal A, B, or
IP Address Type C type, but cannot be the
reserved IP address 0.x.x.x or
127.x.x.x. If it is set to [Link], this
parameter is not used. The
parameter cannot be equal to any
other SCTP link IP address but
must be an active interface
address of this board.

Start Week of the Daylight Saving

Time

Enumeration
Type

[Link]~255.255.255
None
.255

SUN(Sunday),
MON(Monday),
TUE(Tuesday),
SUN, MON, TUE,
WED(Wednesday), WED, THU, FRI,
THU(Thursday),
SAT
FRI(Friday),
SAT(Saturday)

None

Second peer IP address of SCTP

association. This parameter is one
of those between NodeB and
RNC. This parameter must be set
to meet the following conditions:
This parameter can be set to
[Link]. If it is not set to [Link],
IP Address Type the IP address is of legal A, B, or
C type, but cannot be the
reserved IP address 0.x.x.x or
127.x.x.x. If it is set to [Link], this
parameter is not used. The
parameter cannot be equal to any
other SCTP link IP address.

[Link]~255.255.255
None
.255

Automatic Alarm Handling Switch

After the VSWR Alarm

Enumeration
Type

ON (Switch on),
OFF (Switch off)

ON, OFF

None

Smooth Power Change Function

Switch

Enumeration
Type

OPEN (OPEN),
CLOSE (CLOSE)

OPEN, CLOSE

None

Enumeration
Type

FIRST(First),
SECOND(Second), FIRST, SECOND,
THIRD(Third),
THIRD, FOURTH,
FOURTH(Fourth), LAST
LAST(Last)

Start Week Sequence of the

Daylight Saving Time

None

IPCLK Server IP Address, which

should belong to legal A, B, or C
type but cannot be the reserved IP IP Address Type address 0.x.x.x or 127.x.x.x. The
CIP and SIP should be different.

[Link]~255.255.255
None
.255

Temperature Compensation
Coefficient

Interval Type

0~500

Celsi
us

Number of the Tail Cabinet in the

RRU Ring

Enumeration
Type

MASTER(Master
cabinet)

MASTER

None

Source Resource Group ID

Interval Type

0~3

None

Timely Discharge Test Time

Interval Type

30~240

Antenna Tilt

Interval Type

-100~300

-100~300*0.1,
Step:0.1

degre
e

Installed Mechanical Tilt

Range Type

-100~127

-10~12.7, Step:0.1

degre
e

Installed Mechanical Tilt

Range Type

-10~30

-100~300, Step:10

degre
e

Source E1/T1 Time Slot No. A map

of the timeslot, denoted in binary
format.
Enumeration
If a timeslot is selected, it is
Type
crossed to the timeslot. Otherwise,
it is not crossed.

TS1, TS2, TS3,

TS4, TS5, TS6,
TS7, TS8, TS9,
TS10, TS11,
TS12, TS13,
TS14, TS15,
TS16, TS17,
TS18, TS19,
TS20, TS21,
TS22, TS23,
TS24, TS25,
TS26, TS27,
TS28, TS29,
TS30, TS31

Source Port VCI

Interval Type

32~511

None

Source Port VPI

Interval Type

0~255

None

Temperature Alarm Lower Limit

Interval Type

-10.00~55.00

Celsi
us

Minimum Preferable Value of the

Temperature at the Delta Air Outlet
Interval Type
of the NCMU Heat Control Delta
Parameter

-99~70

Start Time

Format:HH&MM&S
Format:HH&MM&SS None
S

Compound Type

Time Offset of the Daylight Saving

Interval Type
Time

-120~120

-99~70

-120~120

Celsi
us

None

TRUNK (TRUNK),
BRANCH
TRUNK, BRANCH
(BRANCH)

0~1

None

Slot Number of the Tail Interface

Board (For Ring Topology Only)

Interval Type

2~3

None

Number of the Tail Subrack (For

Ring Topology Only)

Interval Type

Topology Type of the RRU Chain

Enumeration
Type

CHAIN (Chain
Topology Type),
RING (Ring
Topology Type)

CHAIN, RING

None

Temperature Alarm Upper Limit

Interval Type

-10.00~55.00

Celsi
us

Sub Frame Max Length, which

indicates the maximum length of
the FP before multiplexing. The FP
Interval Type
can be multiplexed only when its
frame length is smaller than this
value.

1~1023

byte

Tx Switch, if it is empty, the Tx

Trace Byte Setting will not be
changed.

Enumeration
Type

DISABLE(Disable),
DISABLE, ENABLE None
ENABLE(Enable)

Trace Byte

Enumeration
Type

J0(J0), J1(J1),
J2(J2)

0 None

J0, J1, J2

None

This parameter indicates the

duration of Timer.

Interval Type

1~20

16th TimeSlot Support. This

parameter is valid when the
timeslot is in E1 mode.

Enumeration
Type

ENABLE(Enable),
ENABLE, DISABLE None
DISABLE(Disable)

Tx Unit No.

Range Type

0~1

None

WRFU/RRU TX Unit Switch

Enumeration
Type

ON (Switch on),
OFF (Switch off)

ON, OFF

None

TS1, TS2, TS3,

TS4, TS5, TS6,
TS7, TS8, TS9,
TS10, TS11,
TS12, TS13,
TS14, TS15,
TS16, TS17,
TS18, TS19,
TS20, TS21,
TS22, TS23,
TS24, TS25,
TS26, TS27,
TS28, TS29,
TS30, TS31

E1/T1 Time Slot No. A map of the

timeslot, denoted in binary format.
Enumeration
If a timeslot is selected, it is
Type
crossed to the timeslot. Otherwise,
it is not crossed.

1~20

Tx Bandwidth

Interval Type

8~100000

kbit/s

The TXBW of RSCGRP should be

smaller than or equal to the
Interval Type
physical port bandwidth.

32~15800

kbit/s

Sensor Type of the NEMU Standby Enumeration

Analog Value Input Parameters
Type

VOLTAGE (Voltage
VOLTAGE,
Type), CURRENT
CURRENT
(Current Type)

None

Undercurrent Alarm Clearance

Threshold of the Antenna Line
Device (ALD)

0~1000

Interval Type

0~1000

Upper Threshold of the NEMU

Input Voltage Alarm

Any Type

57.00~60.00

57.00~60.00,
precision:0.01

Upper Alarm Occur Limit

0~64 characters

None

Vendor Code

String Type

None

A string of up to 64
characters

None

Tx Procotol Version. According to

DEM_2_CHAN (2Channels
Demodulation
Mode),
DEM_4_CHAN (4Channels
Demodulation
Mode),
DEM_ECON_4_C
HAN (Economical
4-Channels
Demodulation
Mode)

DEM_2_CHAN,
DEM_4_CHAN,
DEM_ECON_4_CH
AN

None

Enumeration
Type

GMT-0400 (GMT04:00), GMT-0330

(GMT-03:30),
GMT-0300 (GMT03:00), GMT-0200
(GMT-02:00),
GMT-0100 (GMT01:00), GMT
(GMT),
GMT+0100
(GMT+01:00),
GMT+0200
(GMT+02:00),
GMT+0300
(GMT+03:00),
GMT+0330
(GMT+03:30),
GMT+0400
(GMT+04:00),
GMT+0430
(GMT+04:30),
GMT+0500
(GMT+05:00),
GMT+0530
(GMT+05:30),
GMT+0545
(GMT+05:45),
GMT+0600
(GMT+06:00),
GMT+0630
(GMT+06:30),
GMT+0700
(GMT+07:00),
GMT+0800
(GMT+08:00),
GMT+0900
(GMT+09:00),

Work Mode

Time Zone (If it is not specified,

the time zone settings do not
change.)

(GMT-05:00), GMT0400 (GMT-04:00),

GMT-0330 (GMT03:30), GMT-0300
(GMT-03:00), GMT0200 (GMT-02:00),
GMT-0100 (GMT01:00), GMT (GMT),
GMT+0100
(GMT+01:00),
GMT+0200
(GMT+02:00),
GMT+0300
(GMT+03:00),
GMT+0330
(GMT+03:30),
GMT+0400
(GMT+04:00),
GMT+0430
None
(GMT+04:30),
GMT+0500
(GMT+05:00),
GMT+0530
(GMT+05:30),
GMT+0545
(GMT+05:45),
GMT+0600
(GMT+06:00),
GMT+0630
(GMT+06:30),
GMT+0700
(GMT+07:00),
GMT+0800
(GMT+08:00),
GMT+0900
(GMT+09:00),
GMT+0930
(GMT+09:30),

Switch for disturb detect

range

0~1

None

Check mode

range

0~2

None

range

If the check mode

is POW_IQ_MODE
or IQ_MODE, the
range is 9~[Link] the
check mode is
POW_MODE, the
range is 0xFF for
invalid value.

If the check mode is

POW_IQ_MODE or
IQ_MODE, the range
is 2^9~2^[Link] the
byte
check mode is
POW_MODE, 255
for invalid value.

Power Start Period

range

If the check mode

0~1

None

IQ Data Length

Carrier Index 2

range

0~3

None

Unit Index 2

range

0~1

None

Carrier Index 3

range

0~3

None

Unit Index 3

range

0~1

None

Carrier Index 4

range

0~3

None

Unit Index 4

range

0~1

None

Carrier Index 5

range

0~3

None

Unit Index 5

range

0~1

None

Carrier Index 6

range

0~3

None

Unit Index 6

range

0~1

None

Carrier Index 7

range

0~3

None

Unit Index 7

range

0~1

None

Carrier Index 8

range

0~3

None

Unit Index 8

range

0~1

None

Rate Unit

Enumerate

kbps, cell/s

None

Protocol Type

Enumerate

HW_DEFINED,
PTP

HW_DEFINED, PTP None

Domain which slave side join in

Range Type

0~127

None

A flag indicating which RNC the

NodeB belong to.

Enumerate

MASTER, SLAVE

None

Maintenance Domain name

String Type

1~43byte

None

Maintenance level

Range Type

0~7

None

Maintenance Domain name

String Type

1~43byte

None

Maintenance Association name

String Type

1~43byte

None

Virtual LAN ID

Range Type

1~4094

None

Maintenance End Point ID, only in

Hop Type

Enumeration
Type

SINGLE_HOP,
MULTI_HOP

None

User configure local TX interval

Range Type

10~1000

User configure local RX interval

Range Type

10~1000

User configure local detect

multiplier

Range Type

3~10

None

TrunkNo.

Range Type

0~1

None

Lacp Switch

Enumeration
Type

DISABLE,
ENABLE

DISABLE, ENABLE

None

ArpProxy
Frame Error Rate
AppearThreshold of FE MAC
Layer

Enumeration
Type

Range Type

DISABLE,
ENABLE

0~100

DISABLE, ENABLE

EFACH HS-SCCH Power Control

Method

Enumeration
Type

CQI (CQI-based
power control),
FIXED (Fixed
Power)

CQI, FIXED

None

HS-SCCH FER Target in CELL

DCH State

Range Type

1~999

Enumeration
Type

NO_CQI_ADJ(Not
CQI Adjust
NO_CQI_ADJ,
Algorithm),
CQI_ADJ_BY_RBLE None
CQI_ADJ_BY_RBL
R
ER(CQI Adjusted
by RBLER),

CQI Adjustment Algorithm Switch

of Conversational Service

CQI Adjustment Algorithm Switch

of non-Conversational Service

Enumeration
Type

NO_CQI_ADJ(Not
CQI Adjust
NO_CQI_ADJ,
Algorithm),
CQI_ADJ_BY_IBLE None
CQI_ADJ_BY_IBL
R
ER(CQI Adjusted
by IBLER)

Residual BLER Target is valid only

when the CQI Adjust Algorithm is Range Type
set to CQI_ADJ_BY_RBLER

1~50

HSUPA CE SCHEDULING
SWITCH

Enumeration
Type

OPEN, CLOSE

0, 1

None

HSUPA OVERLOAD
SCHEDULING SWITCH

Enumeration
Type

OPEN, CLOSE

0, 1

None

It refers to Source LocalCell ID

Range Type

0~26843545

None

It refers to Destination LocalCell ID Range Type

0~26843545

None

Max Sharing Power Ratio

Range Type

1~80

Sharing Power Margin

0~2

None

range

If the check mode

is POW_IQ_MODE
or IQ_MODE, the
range is 9~28;If the
check mode is
POW_MODE, the
range is 0xFF for
invalid value.

If the check mode is

POW_IQ_MODE or
IQ_MODE, the range
is 2^9~2^28;If the
byte
check mode is
POW_MODE, 255
for invalid value.

Power Start Period

range

If the check mode

0~1

None

Carrier Index 2

range

0~3

None

Unit Index 2

range

0~1

None

Carrier Index 3

range

0~3

None

Unit Index 3

range

0~1

None

Carrier Index 4

range

0~3

None

Unit Index 4

range

0~1

None

IQ Data Length

Carrier Index 5

range

0~3

None

Unit Index 5

range

0~1

None

Carrier Index 6

range

0~3

None

Unit Index 6

range

0~1

None

Carrier Index 7

range

0~3

None

Unit Index 7

range

0~1

None

Carrier Index 8

range

0~3

None

Unit Index 8

range

0~1

None

Enumeration
Type

When SBT is
BASE_BOARD,
choose IMA
(IMAGRP), UNI
(UNILNK), or
FRAATM
(FRAATM)
When SBT is
UNCHANNELLED
_COVERBARD,
choose STM1
(Unchannelled
STM1)
When SBT is
BACK_BOARD,
choose UNI
(UNILNK), or
FRAATM
(FRAATM)

When SBT is
BASE_BOARD,
choose IMA
(IMAGRP), UNI
(UNILNK), or
FRAATM (FRAATM)
When SBT is
UNCHANNELLED_
COVERBARD,
None
choose STM1
(Unchannelled
STM1)
When SBT is
BACK_BOARD,
choose UNI
(UNILNK), or
FRAATM (FRAATM)

Bearing Port Type

Port Type

Bearing Port Type

Enumeration
Type

when SBT is
E1_COVERBOAR
D: PPP(PPP),
MPGRP(MLPPPP
GROUP) are
available.
when SBT is
ETH_COVERBOA
RD:
ETH(ETHPORT),
ETHTRK(Ethernet
Trunk Group) ,
LOOPINT(LOOPB
ACK INTERFACE)
are available.
when SBT is
BACK_BOARD:
PPP(PPP) is
available.

when SBT is
E1_COVERBOARD:
PPP(PPP),
MPGRP(MLPPPP
GROUP) are
available.
when SBT is
ETH_COVERBOAR
D: ETH(ETHPORT),
None
ETHTRK(Ethernet
Trunk Group) ,
LOOPINT(LOOPBA
CK INTERFACE) are
available.
when SBT is
BACK_BOARD:
PPP(PPP) is
available.

Enumeration
Type

When SBT is
BASE_BOARD,
choose PPP
(PPP), MPGRP
(MLPPP Group),
ETH (ETH), or
LOOPINT(LOOPB
ACK INTERFACE)
When SBT is
E1_COVERBOAR
D, choose PPP
(PPP) or MPGRP
(MLPPP Group)
When SBT is
ETH_COVERBOA
RD, choose ETH
(ETH), ETHTRK
(Ethernet Trunk
Group), or
LOOPINT(LOOPB
ACK INTERFACE)
When SBT is
BACK_BOARD,
choose PPP(PPP)

When SBT is
BASE_BOARD,
choose PPP (PPP),
MPGRP (MLPPP
Group), ETH
(ETH), or
LOOPINT(LOOPBA
CK INTERFACE)
When SBT is
E1_COVERBOARD,
choose PPP (PPP)
or MPGRP (MLPPP
None
Group)
When SBT is
ETH_COVERBOAR
D, choose ETH
(ETH), ETHTRK
(Ethernet Trunk
Group), or
LOOPINT(LOOPBA
CK INTERFACE)
When SBT is
BACK_BOARD,
choose PPP(PPP)

Port Type

Enumeration
Type

E1T1~ETH: when
SBT is
BASE_BOARD;
STM1:when SBT is
UNCHANNELLED
_COVERBOARD;
E1T1: when SBT is
E1_COVERBOAR
D

E1T1~ETH: when
SBT is
BASE_BOARD;
STM1:when SBT is
None
UNCHANNELLED_
COVERBOARD;
E1T1: when SBT is
E1_COVERBOARD

Enumeration
Type

it is valid when
BEAR is ATM
mode
Value range: IMA
(Bearing Port Type
is IMA), UNI
(Bearing Port Type
is UNI), STM1
(Bearing Port Type
is STM1),
FRAATM (Bearing
Port Type is
FRAATM)

it is valid when
BEAR is ATM mode
Value range: IMA
(Bearing Port Type is
IMA), UNI (Bearing
Port Type is UNI),
None
STM1 (Bearing Port
Type is STM1),
FRAATM (Bearing
Port Type is
FRAATM)

(IMAGRP), UNI
(UNILNK), or
FRAATM
(FRAATM)
When SBT is
UNCHANNELLED
_COVERBARD,
choose STM1
(Unchannelled
STM1)
When SBT is
BACK_BOARD,
choose UNI
(UNILNK), or
FRAATM
(FRAATM)
When the bear
type is IPV4,
When SBT is
BASE_BOARD,
choose PPP
(PPP), MPGRP
(MLPPP Group),
ETH (ETH), or
LOOPINT(LOOPB
ACK INTERFACE)
When SBT is
E1_COVERBOAR
D, choose PPP
(PPP) or MPGRP
(MLPPP Group)
When SBT is
ETH_COVERBOA
RD, choose ETH
(ETH), ETHTRK
(Ethernet Trunk
Group), or
LOOPINT(LOOPB
If SN = 0~5,
E1_COVERBOAR
D: E1 Coverboard;
If SN = 6~7,
BASE_BOARD:
Base Board;

BASE_BOARD,
choose IMA
(IMAGRP), UNI
(UNILNK), or
FRAATM (FRAATM)
When SBT is
UNCHANNELLED_
COVERBARD,
choose STM1
(Unchannelled
STM1)
When SBT is
BACK_BOARD,
choose UNI
(UNILNK), or
FRAATM (FRAATM)
When the bear type
is IPV4,
When SBT is
None
BASE_BOARD,
choose PPP (PPP),
MPGRP (MLPPP
Group), ETH
(ETH), or
LOOPINT(LOOPBA
CK INTERFACE)
When SBT is
E1_COVERBOARD,
choose PPP (PPP)
or MPGRP (MLPPP
Group)
When SBT is
ETH_COVERBOAR
D, choose ETH
(ETH), ETHTRK
(Ethernet Trunk
Group), or
LOOPINT(LOOPBA
If SN = 0~5,
E1_COVERBOARD:
E1 Coverboard;
None
If SN = 6~7,
BASE_BOARD:
Base Board;

Interval Type

0~100

None

Interval Type

0~100

E1T1 Subboard Type

Enumeration
Type

If SN = 0~5,
If SN = 0~5,
E1_COVERBOAR E1_COVERBOARD: None
D:E1 Coverboard E1 Coverboard

E1T1 Port No.

Range Type

0~3: When SBT is

PTP Priority

Clear Statistic

None

This parameter indicates the

number of the sent packets.

Range Type

1~256

None

This parameter indicates the size

of the sent packet.

Range Type

95~1500

bytes

This parameter indicates the

preset timeout (unit: s).

Range Type

1~65535

This parameter indicates the

preset interval (unit: s).

Range Type

1~60

Bearing Port Type

Enumeration
Type

ETHTRK(ETHTRK
), MPGRP(MLPPP ETHTRK(ETHTRK),
None
GROUP),
MPGRP, ETH
ETH(ETH)

The type of power

Enumeration
Type

APM100,
APM200, APM30

APM100, APM200,
APM30

None

Default Value

Recommended
Value

Impact

Parameter Relationship

None

20 Cell

None

10 Cell

None

Cell

None

25 Cell

None

15 Cell

None

30 Cell

None

15 Cell

None

10 Cell

None

OPEN

None

NodeB

None

NodeB

This parameter is valid when

the operating mode is CSAT

NPMU

This parameter value must

be greater than
[PARA]ACVLL[/PARA] in
[MML]SET
ACDCVLIMIT[/MML]

180 None

NPMU

[PARA]ACVLL[/PARA] is less
than [PARA]ACVHL[/PARA]
in [MML]SET
ACDCVLIMIT[/MML]

None

OMCH

None

500000 NodeB

None

NodeB

None

Cell

It is valid when
[PARA]SCHEDULEPARA[/P
ARA] is YES in [MML]SET
MACEPARA[/MML].

280 None

None

500000

None

NodeB

None

NodeB

This parameter is valid only

when the
[PARA]OBJN[/PARA] is set
"BRD", E1/T1(E1/T1),
E1/T1OnChannelsSubbrd.

NodeB

When MODE = CUSTOM,

this parameter is valid. If the
parameter is not specified,
the existing binding relation
is not changed. If the original
setting of the system is 0,
the alarm ID is invalid.

None

OMCH

This parameter is valid when

the [PARA]BEAR[/PARA]
parameter in [MML]ADD
OMCH[/MML] is set to IPV4.

MASTER

Cell

None

ANTA

None(ADD SEC)

None

Cell

For DBS:when
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is set
to REMOTE_SECTOR, the
value range is R0A, R0B.
For
BTS:REMOTE_SECTOR
and LOCAL_SECTOR is
[Link]
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is set
to LOCAL_SECTOR, the
value range is N0A, N0B,
N1A, N1B, N2A, N2B, N3A,
N3B, N4A, N4B, N5A, N5B;

Cell

None

None(ADD SEC)

Cell

For DBS:When
[PARA]SECT[/PARA] is set
to REMOTE_SECTOR, the
value range is 20~254;
For
BTS:REMOTE_SECTOR
and LOCAL_SECTOR is
[Link]
[PARA]SECT[/PARA] is set
to LOCAL_SECTOR, the
value range is 4~[Link]
[PARA]SECT[/PARA] is set
to REMOTE_SECTOR, the
value range is 20~254;

MASTER

Cell

None

ANTA

None(ADD SEC)

None

Cell

None

None(ADD SEC)

Cell

MASTER

Cell

None

None(ADD SEC)

Cell

None

None(ADD SEC)

Cell

MASTER

Cell

None

Cell

None

None(ADD SEC)

None

None(ADD SEC)

None

1.00E-05 1ENone5

Cell

This parameter is valid only

When the
[PARA]SECT[/PARA] is
REMOTE_SECTOR or
LOCAL_SECTOR.
When [PARA]WM[PARA] of
[MML]SET DEMODE[/MML]
is set to DEM_2_CHAN,
there will be 1 or 2 antena;
When [PARA]WM[PARA] of
[MML]SET DEMODE[/MML]
is set to
DEM_4_CHAN or
DEM_ECON_4_CHAN ,
there will be 1/2/4 antena.

NodeB

None

NodeB

None

NEMU

None

Battery

This parameter TDSTM is

valid only when
[PARA]TDSTM[/PARA] in
[MML]SET BATATPA[/MML]
is set to "PERIOD" or
"PERIODPOWERCUT"

None

NodeB

None

1000

1000 SAAL

None

NodeB

None

OFF

None

NodeB

None

NodeB

None

NEMU

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

56.5

56.5 NodeB

This parameter must be

greater than
[PARA]FCVOL[/PARA] in
[MML]SET
BCFCVOLTAGE[/MML] and
less than
[PARA]DCVHL[/PARA] in
[MML]SET
ACDCVLIMIT[/MML]-1, and
between 43.2 and 57.6.

None

1 NodeB

This parameter is valid when

in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V1.1.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V1.1.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V1.1.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.

None

OMCH

This parameter is valid when

in [MML]ADD OMCH[/MML]
[PARA]BEAR[/PARA] is set
to IPV4 and
[PARA]BRT[/PARA] is set to
[Link]
[PARA]DSTIP[/PARA] & the
[PARA]DSTMASK[/PARA]
must be equal to the
[PARA]DSTIP[/PARA].

OMCH

This parameter is valid when

in [MML]ADD OMCH[/MML]
[PARA]BEAR[/PARA] is set
to IPV4 and
[PARA]BRT[/PARA] is set to
[Link]
[PARA]DSTIP[/PARA] & the
[PARA]DSTMASK[/PARA]
must be equal to the
[PARA]DSTIP[/PARA].
This parameter is valid only
when the
[PARA]FUNCTION[/PARA]
parameter is set to ENABLE.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to OPE.

None

NodeB

None

ENABLE

NodeB

None

NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
RING.

0 None

NodeB

None

IUBCP

None

DISABLE

None

NodeB

None

NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
"RING"

ENABLE

NodeB

None

NodeB

If the value is "ENABLE",

the value of
[PARA]BSDV[/PARA] in
[MML]SET SDPA[/MML] is
valid.

NodeB

The parameter is valid only

when the
[PARA]BSDF[/PARA] in
[MML]SET SDPA[/MML] is
set to Enable.

ENABLE

None

43 None

None

10 Ethport

[PARA]FERAT[/PARA]
should be greater than or
equal to
[PARA]FERDT[/PARA].

None

0 None

NodeB

None

NodeB

The parameter is valid only

when the
[PARA]SWT[/PARA] in
[MML]ACT
SOFTWARE[/MML] is set to
HOMOBRDSW or
HOMOBRDROM.

53 NodeB

NodeB

BTEM could be configed

when [PARA]BFLG[/PARA]
in [MML]SET
HTPROTECT[/MML] is
ENABLE
None

REGULAR

None

NodeB

8 Ethport

None

[PARA]FERDT[/PARA]
should be smaller than or
equal to
[PARA]FERAT[/PARA].

None

NodeB

None

MASTER

OMCH

None

DISABLE

NodeB

None

NodeB

[PARA]CertChain[/PARA] is
valid while
[PARA]CCAEnableSta[/PAR
A]=Enable in [MML]SET
CERTFILE[/MML].

None

BEST_EFFORT

None

NodeB

None

COMPRESSED

NodeB

This parameter is valid only

when
[PARA]CHRSW[/PARA]=ON
in [MML]SET CHRSW[/MML]

None

NodeB

None

OFF

NodeB

None

NodeB

This parameter is valid only

when
[PARA]CHRSW[/PARA]=ON
in [MML]SET CHRSW[/MML]

ALL

None

NodeB

This parameter is valid only

when [PARA]TYPE[/PARA]
in [MML]STR
RTWPRTTST[/MML] is set
to "CHANGE" or
"CHANGE_THRESHOLD"

None

NodeB

None

270

15000

270 NodeB

15000 SAAL

This parameter is valid only

when the
[PARA]FPMUXSWITCH[/PA
RA] parameter in [MML]SET
FPMUX[/MML] is set to
ENABLE.
The difference between
[PARA]FRAMELEN[/PARA]
(Frame Max Length) and
[PARA]SUBFRAMELEN[/PA
RA](Sub Frame Max Length)
is greater than 4.
The value of this paramter
must be greater than or
equal to the value of
[PARA]KATM[/PARA].

None

LINE

OMCH

This parameter is valid when

in [MML]ADD OMCH[/MML]
[PARA]BEAR[/PARA] is set
to IPV4 ,
[PARA]BRT[/PARA] is set to
YES and [PARA]RT[/PARA]
is set to IF.

None

OMCH

This parameter is valid when

in [MML]ADD OMCH[/MML]
[PARA]BEAR[/PARA] is set
to IPV4 ,
[PARA]BRT[/PARA] is set to
YES and [PARA]RT[/PARA]
is set to IF.

75 None

NodeB

None

NodeB

This parameter is valid only

when [PARA]MODE[/PARA]
in [MML]SET
CLKMODE[/MML] is set to
"MANUAL"

None

LINE

None
UNILNK)
MASTER(ADD
CFMMA)
MASTER(ADD
CFMMEP)
MASTER(ADD
BFDSESSION)
MASTER(ADD
ETHTRK)
MASTER(ADD
ETHTRKLNK)
MASTER(SET
ACDCVLIMIT)
MASTER(SET
ALDPWRSW)
MASTER(SET
ALMPORT)
MASTER(SET
ANTTILT)
MASTER(SET
BATATPA)
MASTER(SET
BATCTPA)
MASTER(SET
BCFCVOLTAGE)
MASTER(SET
CLKMODE)
MASTER(SET
HTPROTECT)
MASTER(SET
IFOFFSET)
MASTER(SET
OUTPORT)
MASTER(SET
PWRSYSCFG)
MASTER(SET
RFDESPARAM)
MASTER(SET

None
CFMMA)
MASTER(ADD
CFMMEP)
MASTER(ADD
BFDSESSION)
MASTER(ADD
ETHTRK)
MASTER(ADD
ETHTRKLNK)
MASTER(SET
ACDCVLIMIT)
MASTER(SET
ALDPWRSW)
MASTER(SET
ALMPORT)
MASTER(SET
ANTTILT)
MASTER(SET
BATATPA)
MASTER(SET
BATCTPA)
MASTER(SET
BCFCVOLTAGE)
MASTER(SET
CLKMODE)
MASTER(SET
HTPROTECT)
MASTER(SET
IFOFFSET)
MASTER(SET
OUTPORT)
MASTER(SET
PWRSYSCFG)
MASTER(SET
CMUCFG)
MASTER(SET
RFDESPARAM)

NodeB

MASTER

None

Cell

MASTER

None

NodeB

None
Processing unit)
0
0
0~5
UTRP (Universal extension
TRansmission Processing
unit)
0
0
6~7
WMPT (WCDMA Main
Processing & Transmission
unit)
0
0
16
UBF
(Universal BBU Fan unit)

0
0
18~19
UPEA(Universal Power and
Environment interface unit
type A(-48V))
\UPEB(Universal Power and
Environment interface unit
type B(24V))
\UEIU(Universal
Environment Interface Unit)
0
6
0
NEMU (NodeB Environment
Monitoring Unit)

Cell

0
7
0
NPMU (NodeB Power
For DBS:This parameter is
valid only When the
[PARA]SECT[/PARA] is
REMOTE_SECTOR.
For BTS:This parameter is
valid When the
[PARA]SECT[/PARA] is
REMOTE_SECTOR and
LOCAL_SECTOR.
For DBS:This parameter is
valid only When the
[PARA]SECT[/PARA] is
REMOTE_SECTOR.
For BTS:This parameter is
valid When the
[PARA]SECT[/PARA] is
REMOTE_SECTOR and
LOCAL_SECTOR.

ADD SEC:This parameter is

valid only When the
[PARA]SECT[/PARA] is
DIST_SECTOR.
ADD LOCELL:This
parameter is valid noly
When the
[PARA]SECT[/PARA] is
DIST_SECTOR, at the same
time[PARA]RRUMODE[/PAR
A] is UNSYNC.
ADD SEC:This parameter is
valid only When the
[PARA]SECT[/PARA] is
DIST_SECTOR.
ADD LOCELL:This
parameter is valid noly
When the
[PARA]SECT[/PARA] is
DIST_SECTOR, at the same
time[PARA]RRUMODE[/PAR
A] is UNSYNC.

MASTER

None

Cell

MASTER

None

Cell

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

MASTER

NodeB

None

NodeB

None

NodeB

None

ALL

None

NodeB

None

64 None

None

NodeB

It is valid when
[PARA]AUTOSW[/PARA] is
ON in [MML]SET
EMGLICENSE[/MML].

Cell

It is valid only When

[PARA]DIVM[/PARA] in
[MML]ADD SEC[/MML] is
HALFFREQ.

NodeB

maintenance, IP address of
the Ethernet port, and IP
address for remote
maintenance must be
unique.
The IP addresses of the FE
port, local maintenance
channel, and remote
maintenance channel cannot
be on the same network
segment. In addition, the
network segments of the
three types of IP address
must be exclusive of each
other.
Check whether two IP
addresses are on the same
network segment by using
the following formula:
(IpValueA &
IpMaskA==IpValueB &
IpMaskB)&&(IpMaskA==IpM
askB)
Check whether two network
segments are exclusive of
each other by using the
following formulas:
1. IpMask=IpMaskA &
IpMaskB
2. IpValueA &
IpMask==IpValueB & IpMask
IP & ~mask cannot be 0
IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff

None

OMCH

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

Cell

None

NodeB

[PARA]CRL[/PARA] is valid
while
[PARA]CRLEnableSta[/PAR
A]=Enable in [MML]SET
CERTFILE[/MML].

None

NodeB

None

Auxiliary power
system
CMU

None

DISABLE

None

NodeB

None

NodeB

This parameter is valid only

when
[PARA]CSLSDF[/PARA] in
[MML]SET SDPA[/MML] is
set to "ENABLE"

-10 None

None

No involved

None

NodeB

None

NodeB

None

NodeB

None

NodeB

It is valid when
[PARA]MANUALSW[/PARA]
is ON in [MML]SET
EMGLICENSE[/MML].

None

NodeB

It is valid when
[PARA]MANUALSW[/PARA]
is ON in [MML]SET
EMGLICENSE[/MML].

2 None

NCMU

None

Cell

None

NodeB

None

NodeB

None

NodeB

None

58 NPMU

48.5

14 None

100(ADD
LOCELL)

NodeB

None

This parameter must be

greater than
[PARA]BCVOL[/PARA] in
[MML]SET
BCFCVOLTAGE[/MML] + 1

48.5 NPMU

This parameter value must

be greater than
[PARA]LSDV[/PARA] in
[MML]SET SDPA[/MML],
less than
[PARA]FCVOL[/PARA] in
[MML]SET
BCFCVOLTAGE[/MML]-2
This parameter value must
be greater than
[PARA]BSDV[/PARA] in
[MML]SET SDPA[/MML]
when [PARA]LSDF[/PARA]
in [MML]SET SDPA[/MML] is
set to "Disable"
This parameter value must
be greater than 35 when
[PARA]LSDF[/PARA] and
[PARA]BSDF[/PARA] in
[MML]SET SDPA[/MML] are
both set to "Disable"

Battery

The [PARA]DDSTM[/PARA]
value must be smaller than
[PARA]TDSTM[/PARA] value
in [MML]SET
BATATPA[/MML].

Cell

This parameter is valid noly

When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
DIST_SECTOR.

DISABLE

None

2000

OMCH

2000 SAAL

The resource group is added

when [PARA]BEAR[/PARA]
in [MML]ADD OMCH[/MML]
is set to ATM.
This parameter must be
greater than or equal to the
value of
[PARA]POLL[/PARA].
This parameter must be
smaller than or equal to the
value of
[PARA]IDLE[/PARA].
This parameter must be
smaller than the value of
[PARA]NRTM[/PARA].

None

NodeB

None

NodeB

None

NodeB

[PARA]DEVTP[/PARA] is
valid while
[PARA]OPMODE[/PARA]=S
ECTOR or OPMODE=CSAT

V1.1

NodeB

None

Cell

None

NodeB

None

NodeB

None

NodeB

This parameter is valid only

when the value of
[PARA]LM[/PARA] is set to
ONLYIPADDR or
IPADDRANDUDPPORT.

-(SET DESENS)
0(ADD LOCELL)

None

Cell

This parameter is valid only

when the sector type of local
cell is not distributed sector.

Cell

This parameter is invalid

when the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
DIST_SECTOR; HALFFREQ
is valid when
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
REMOTE_SECTOR.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, N0A, N1A, N2A,
N3A, N4A, N5A.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, N0A, N1A, N2A,
N3A, N4A, N5A.

COMMON_MODE COMMON_MODE

100(ADD SEC)

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, N0A, N1A, N2A,
N3A, N4A, N5A.

100(ADD SEC)

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, N0A, N1A, N2A,
N3A, N4A, N5A.

None

Cell

None

None(ADD
DLGROUP)

NodeB

None

0(ADD LOCELL)

None

Cell

None

SCTP

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

Battery

None

NodeB

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

NodeB

None

NodeB

This parameter is valid only

when
[PARA]CHRSW[/PARA]=ON
in [MML]SET CHRSW[/MML]

None

OMCH

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

4 SAAL

None

67 SAAL

None

25 SAAL

None

0 None

Battery

None

NodeB

The value range is 0~1 when

[PARA]DSTPT[/PARA] is
IMA and
[PARA]DSTSBT[/PARA] is
BASE_BOARD;
The value range is 0~3 when
[PARA]DSTPT[/PARA] is
IMA and
[PARA]DSTSBT[/PARA] is
E1_COVERBOARD;
The value range is 0~3 when
[PARA]DSTPT[/PARA] is
UNI and
[PARA]DSTSBT[/PARA] is
BASE_BOARD;
The value range is 0~7 when
[PARA]DSTPT[/PARA] is
UNI and
[PARA]DSTSBT[/PARA] is
E1_COVERBOARD;

0 None

NodeB

The value range is 0~3 when

[PARA]DSTPT[/PARA] is
FRAATM and
[PARA]DSTSBT[/PARA] is
BASE_BOARD;
The value range is 0~7 when
[PARA]DSTPT[/PARA] is
FRAATM and
[PARA]DSTSBT[/PARA] is
E1_COVERBOARD;

None

NodeB

The value range is 0~3 when

[PARA]DSTSBT[/PARA] is
BASE_BOARD;
The value range is 0~7 when
[PARA]DSTSBT[/PARA] is
E1_COVERBOARD;

None

NodeB

None

OMCH

This parameter is valid only

when in [MML]ADD
OMCH[/MML]
[PARA]BEAR[/PARA] is set
to ATM and
[PARA]ST[/PARA] is set to
UBR+ .

None

None(ADD
-(ADD
TREELNKPVC)
TREELNKPVC)
None(ADD
-(ADD TSCROSS)
TSCROSS)

NodeB(ADD
TREELNKPVC)
NodeB(ADD
TSCROSS)

None(ADD
-(ADD
TREELNKPVC)
TREELNKPVC)
None(ADD
-(ADD TSCROSS)
TSCROSS)

NodeB(ADD
TREELNKPVC)
NodeB(ADD
TSCROSS)

None(ADD
-(ADD
TREELNKPVC)
TREELNKPVC)
None(ADD
-(ADD BACKE1T1)
BACKE1T1)

NodeB(ADD
TREELNKPVC)
NodeB(ADD
BACKE1T1)

When the value range of

[PARA]DSTSN[/PARA] is
6~7,
[PARA]DSTSBT[/PARA] is
BASE_BOARD.
BASE_BOARD: when the
board in destination slot is
WMPT;
E1_COVERBOARD:When
the board in destination slot
is UTRP
Value range:
BASE_BOARD,
E1_COVERBOARD
None

None

NodeB

The value range is 0~7 when

the value range of
[PARA]NO[/PARA] in
[MML]ADD
TSCROSS[/MML] is 0~7;
The value range is 0~5 when
the value range of
[PARA]NO[/PARA] in
[MML]ADD
TSCROSS[/MML] is 8~15;

None

NodeB

None

ATM

None

NodeB

None

OMCH

This parameter is valid only

when in [MML]ADD
OMCH[/MML]
[PARA]BEAR[/PARA] is set
to IPV4, [PARA]BRT[/PARA]
is set to YES,
[PARA]SN[/PARA] is set to
6-7 and [PARA]RT[/PARA] is
set to NEXTHOP .

None

15000

15000 SAAL

This parameter must be

greater than the value of
[PARA]KATM[/PARA].

None

NodeB

The value range is 0~7 when

[PARA]PRIRULE[/PARA] is
set to IPPRECEDENCE. The
value range is 0~63 when
[PARA]PRIRULE[/PARA] is
set to DSCP.

None

OPEN

Cell

None

FIXED

Cell

It is valid when
[PARA]EAGCHPCPARA[/PA
RA] is YES in [MML]SET
MACEPARA[/MML].

None

Cell

None

-132 Cell

None

142 Cell

None

OMCH

It is valid when
[PARA]EAGCHPCMOD[/PA
RA] is FIXED in [MML]SET
MACEPARA[/MML].
It is valid when
[PARA]EAGCHPCMOD[/PA
RA] is RNC_BASED,
FOLLOW_TPC,
CQI_BASED,
HSSCCH_BASED in
[MML]SET
MACEPARA[/MML].
When the
[PARA]BEAR[/PARA]
parameter in the MML
command is set to ATM , and
[PARA]ST[/PARA] parameter
in the MML command is set
to RTVBR, NRTVBR, or
UBR+, the value of this
parameter should be greater
than that of
[PARA]SCR[/PARA] or
[PARA]MCR[/PARA].

None

NodeB

End Date and End

Time"[PARA]ED[/PARA] and
[PARA]ET[/PARA]in
[MML]STR
E1T1RTTST[/MML]" must be
later than the current date
and time. Start Date and
Start
Time"[PARA]SD[/PARA] and
[PARA]ST[/PARA]in
[MML]STR
E1T1RTTST[/MML]" plus
test time must be earlier
than the End Date and End
Time"[PARA]ED[/PARA] and
[PARA]ET[/PARA]in
[MML]STR
E1T1RTTST[/MML]".

None

NodeB

[PARA]EDAY[/PARA] is valid
while
[PARA]DST[/PARA]=YES
and EM is DATEWEEK or
DATE in [MML]SET
TZ[/MML].

None

Battery

None

NodeB

None

NodeB

[PARA]EM[/PARA] is valid
while
[PARA]DST[/PARA]=YES in
[MML]SET TZ[/MML].

NodeB

[PARA]EMONTH[/PARA] is
valid while
[PARA]DST[/PARA]=YES
and [PARA]EM[/PARA] is
DATEWEEK or DATE in
[MML]SET TZ[/MML].

None

No involved

None

Battery

None

OMCH

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

OMCH

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

NodeB

[PARA]ET[/PARA] is valid
while
[PARA]DST[/PARA]=YES in
[MML]SET TZ[/MML].

None

53.5

None

NodeB

[PARA]EWEEK[/PARA] is
valid while
[PARA]DST[/PARA]=YES
and [PARA]EM[/PARA] is
DATEWEEK or WEEK in
[MML]SET TZ[/MML].

NodeB

[PARA]EWSEQ[/PARA] is
valide while
[PARA]DST[/PARA]=YES
and
[PARA]EM[/PARA]=WEEK.

53.5 NodeB

None

NodeB

End Date and End

NodeB

10 NodeB

This parameter must be less

than [PARA]BCVOL[/PARA]
in [MML]SET
BCFCVOLTAGE[/MML] and
greater than
[PARA]DCVLL[/PARA] in
[MML]SET
ACDCVLIMIT[/MML]+2, and
between 43.2 and 57.6.
This parameter is valid only
when the value of
[PARA]LM[/PARA] is set to
IPADDRANDUDPPORT.
[PARA]PLRAT[/PARA]
should be greater than or
equal to
[PARA]PLRDT[/PARA].

8 NodeB

750

750 SAAL

[SET PLRTHRESHOLD]
This is the threshold for
clearing the packet loss
alarm. The value of this
command should not exceed
the alarm generation
threshold.
[PARA]PLRDT[/PARA]
should be smaller than or
equal to
[PARA]PLRAT[/PARA].
The value of this parameter
must be smaller than or
equal to the value of
[PARA]KATM[/PARA].

None

NodeB

None

NodeB

None

NodeB

None

OMCH

in [MML]ADD OMCH[/MML]
[PARA]BEAR[/PARA] is set
to ATM and
[PARA]ST[/PARA] is set to
RTVBR or NRTVBR.

SAAL

This parameter is valid when

in [MML]ADD
SAALLNK[/MML]
[PARA]ST[/PARA] is set to
RTVBR or NRTVBR.

NodeB

The value range is 0~7 when

[PARA]PRIRULE[/PARA] is
IPPRECEDENCE;
The value range is 0~63
when
[PARA]PRIRULE[/PARA] is
DSCP;

None

OMCH

This parameter should be

set when
[PARA]BEAR[/PARA] in
[MML]ADD OMCH[/MML] is
set to ATM.

None

NodeB

None

This parameter is valid when

in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.

None

GPS

None

MASTER

None

NodeB

None

Cell

None

0 None

FALSE(ADD
LOCELL)

None

Cell

For DBS:This parameter is

valid only When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
REMOTE_SECTOR.
For BTS:This parameter is
valid When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
REMOTE_SECTOR or
LOCAL_SECTOR
[PARA]HLL[/PARA] is less
than [PARA]HUL[/PARA]
in[MML]MOD
NEMUTHLIMIT[/MML]
The inner handover radius of
the local cell must not be
greater than
[PARA]RADIUS[/PARA]
in[MML]ADD
LOCELL[/MML].

None

0(ADD LOCELL)

None

Cell

None

NodeB

None

0 NodeB

None

0 None

NodeB

None

40 None

NCMU

None

15 None

NCMU

None

10 None

NCMU

None

5 None

None

0 None

CBR

None

127

NCMU

None

[PARA]HLL[/PARA] is less
than [PARA]HUL[/PARA]
in[MML]MOD
NEMUTHLIMIT[/MML]

NodeB

None

SAAL

None

127 NodeB

This parameter is valid when

[PARA]FPMUXSWITCH[/PA
RA] in [MML]SET
FPMUX[/MML] is set to
ENABLE.
The difference between
[PARA]FRAMELEN[/PARA]
(Frame Max Length) and
[PARA]SUBFRAMELEN[/PA
RA](Sub Frame Max Length)
is greater than 4.

BW_SHAPING_O
None
NOFF_TOGGLE

NodeB

None

No involved

None

MIDDLE

ENABLE

None

4 NodeB

None

1 NodeB

This parameter is valid when

[PARA]FPMUXSWITCH[/PA
RA] in [MML]SET
FPMUX[/MML] is set to
ENABLE.

NodeB

None

STM1

None

OMCH

This parameter should be

set when
[PARA]BEAR[/PARA] in
[MML]ADD OMCH[/MML] is
set to ATM.

None

NEMU

None

OMCH

None

ULCIRx0.5

NodeB

None

NodeB

This parameter should be

set when
[PARA]BEAR[/PARA] in
[MML]ADD OMCH[/MML] is
set to ATM.
This parameter is valid only
when the
[PARA]FUNCTION[/PARA]
parameter is set to ENABLE.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to OPE.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to OPE.
This parameter is valid only
when the
[PARA]FUNCTION[/PARA]
parameter is set to ENABLE.
The value depends on the
physical interface rate and
must be lower than the
physical interface rate.
When [PARA]PT[/PARA] is
set to MPGRP, the value
range is 32 to 155000 kbit/s;
when [PARA]PT[/PARA] is
set to ETH, the value range
is 32 to 155000 kbit/s.

ETH:100000
MPGRP:31744
ETHTHK:100000

None

NodeB

This parameter is valid only

when the
[PARA]FUNCTION[/PARA]
parameter is set to ENABLE.
The value depends on the
physical interface rate and
must be lower than the
physical interface rate.
When [PARA]PT[/PARA] is
set to MPGRP, the value
range is 32 to 155000 kbit/s;
when [PARA]PT[/PARA] is
set to ETH, the value range
is 32 to 155000 kbit/s.

NodeB

If the Ethernet port is an

electrical port and
[PARA]SPEED[/PARA] in
[MML]SET ETHPORT[/MML]
is not set to AUTO, this
parameter is valid. If the
Ethernet port is an optical
port, this parameter is set to
forced full-duplex.

NodeB

This parameter is valid only

when [PARA]SW[/PARA] in
[MML]SET
SNTPCLTPARA[/MML] is set
to "ON".
This parameter is valid only
when
[PARA]CHRSW[/PARA]=ON
in [MML]SET CHRSW[/MML]

None

NodeB

None

NodeBSET
E1T1WORKMODE None
)

DISABLE

NodeB

None

AUTO

NodeB

This parameter is valid when

[PARA]MODE[/PARA] in
[MML]SET
CLKMODE[/MML] is set to
MANUAL and
[PARA]CLKSRC[/PARA] in
[MML]SET
CLKMODE[/MML] is set to
"IP"

DISABLE

None

NodeB

None

NOLOOP

NodeB

None

NOLOOP

NodeB

None

DISABLE

NodeB

None

NodeB

The value range is 15~30

when
[PARA]SWTICH[/PARA] in
[MML]SET
VSWRALMPARAM[/MML] is
set to ATM.

None

42 NodeB

None

NodeB

LL is less than
[PARA]UL[/PARA] in
[MML]SET
NEMUINVLIMIT[/MML]
When [PARA]PT[/PARA] in
[MML]SET ALMPORT[/MML]
is VALUE, this parameter is
valid.

NOLOOP

None

NodeB

None

NodeB

[PARA]LNCODE[/PARA] can
be HDB3 or AMI when
[PARA]FRAME[/PARA] is
E1_DOUBLE_FRAME or
E1_CRC4_MULTI_FRAME.

NodeB

[PARA]LNCODE[/PARA] can
be B8ZS or AMI when
[PARA]FRAME[/PARA] is
T1_SUPER_FRAME or
T1_EXTENDED_SUPER_F
RAME.

The parameter is valid only

when the
[PARA]LSDF[/PARA] in
[MML]SET SDPA[/MML] is
set to Enable.

MLPPP Link(ADD
MPLNK)
PPP Link(ADD
PPPLNK)

None

1 None

DISABLE

None

44 None

ENABLE

0 None

OFF

NCMU

65 NodeB

None

LTEM could be configed

when [PARA]LFLG[/PARA] in
[MML]SET
HTPROTECT[/MML] is
ENABLE

-20 None

NodeB

[PARA]OTH[/PARA] is more
than [PARA]LTH[/PARA] in
[MML]SET THAT[/MML]

None

NodeB

None

NodeB

This parameter is valid only

when the [PARA]NT[/PARA]
parameter in [MML]ADD
AAL2NODE[/MML] is set to
LOCAL.

None

NodeB

None

0(ADD
AAL2PATH)
-(ADD
AAL2ADJNODE)

0(ADD AAL2PATH)
None(ADD
AAL2ADJNODE)

AAL2 Path(ADD
AAL2PATH)
NodeB(ADD
AAL2ADJNODE)

This parameter is valid only

when the [PARA]NT[/PARA]
parameter in [MML]ADD
AAL2PATH[/MML] is set to
ADJNODE.

None

-60 Cell

It is valid when
[PARA]EAGCHPCMOD[/PA
RA] is CQI_BASED,
HSSCCH_BASED in
[MML]SET
MACEPARA[/MML].

None

MLPPP Group(ADD
MPGRP)
None
PPP Link(ADD
PPPLNK)

ENABLE

SCTP

None

ATM

None

IUBCP

None

Cell

It is valid when
[PARA]PWRMODE[/PARA]
is ABSOLUTE in [MML]MOD
RRUOFLOCELL[/MML].

None

IPV4

NodeB

None

ATM(SET
HSDPAFLOWCTR
None
LPARA)
-(ADD RSCGRP)

NodeB

None

Tree Link
PVC(ADD
10240 TREELNKPVC)
AAL2 Path(ADD
AAL2PATH)

10240

None

NodeB

None

ITC

None

NodeB

None

-300 Cell

0 None

15 None

It is valid when
[PARA]EAGCHPCMOD[/PA
RA] is CQI_BASED,
HSSCCH_BASED in
[MML]SET
MACEPARA[/MML].

IUBCP

This parameter is valid only

when in [MML]ADD
IUBCP[/MML]
[PARA]CPPT[/PARA] is set
to CCP.

NodeB

It is valid when
[PARA]AUTOSW[/PARA] is
ON in [MML]SET
EMGLICENSE[/MML].

None

NEMU

MLL is less than

[PARA]MUL[/PARA] in
[MML]SET
NEMUANLGIN[/MML]

NCP

None

IUBCP

None

NodeB

None

NodeB

None

MANUAL

NodeB

None

NodeB

None

This parameter is valid when

in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to DEV.

None

25 IMA Group

None

Tree Link
PVC(ADD
TREELNKPVC)
Timeslot
Cross(ADD
TSCROSS)

None

NodeB

None

IP Path

None

NodeB

The [PARA]DSTIP[/PARA] &

the
[PARA]DSTMASK[/PARA]
must be equal to the
[PARA]DSTIP[/PARA].

NEMU

This parameter value must

be greater than
[PARA]MLL[/PARA] in
[MML]SET
NEMUANLGIN[/MML]

NodeB

The [PARA]DSTIP[/PARA] &

the
[PARA]DSTMASK[/PARA]
must be equal to the
[PARA]DSTIP[/PARA].

Cell

For DBS:This parameter is

valid only When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
REMOTE_SECTOR.
For BTS:This parameter is
valid When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
REMOTE_SECTOR or
LOCAL_SECTOR

None

100 Cell

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

Tree Link PVC

This parameter is valid only

when the
[PARA]JNRSCGRP[/PARA]
parameter in [MML]ADD
TREELNKPVC[/MML] is set
to ENABLE.

0 None

None

Timeslot Cross

The number of
[PARA]DSTTSN[/PARA] and
[PARA]SRCTSN[/PARA]
timeslots must be equal.

None

Tree Link PVC

It is valid when
[PARA]VST[/PARA] is
VC_SWITCH in [MML]ADD
TREELNKPVC[/MML].

None

Tree Link PVC

None

MASTER

IUBCP

None

IP Path

This parameter is valid only

when the [PARA]PT[/PARA]
parameter in [MML]ADD
IPPATH[/MML] is set to ETH.

DISABLE

0 Fractional ATM

The value range is 0~3 when

[PARA]SBT[/PARA] is set to
BASE_BOARD;
The value range is 0~7 when
[PARA]SBT[/PARA] is set to
E1_COVERBOARD;

None

FIXED

Cell

It is valid when
[PARA]NSEHICHPCPARA[/P
ARA] is YES in [MML]SET
MACEPARA[/MML].

None

Cell

None

-136 Cell

It is valid when
[PARA]NSEHICHPCMOD[/P
ARA] is FIXED in [MML]SET
MACEPARA[/MML].

Cell

It is valid when
[PARA]NSEHICHPCMOD[/P
ARA] is RNC_BASED,
FOLLOW_TPC in [MML]SET
MACEPARA[/MML].

None

FIXED

Cell

It is valid when
[PARA]NSERGCHPCPARA[/
PARA] is YES in [MML]SET
MACEPARA[/MML].

None

Cell

None

-173 Cell

It is valid when
[PARA]NSERGCHPCMOD[/
PARA] is FIXED in
[MML]SET
MACEPARA[/MML].

105 Cell

It is valid when
[PARA]NSERGCHPCMOD[/
PARA] is RNC_BASED,
FOLLOW_TPC in [MML]SET
MACEPARA[/MML].

270

FRAMEMODE_SD
None
H

270 IP Path

This parameter is valid only

when in [MML]ADD
IPPATH[/MML] the value of
[PARA]PT[/PARA] is set to
ETH and
[PARA]FPMUXSWITCH[/PA
RA] is set to ENABLE.
The difference between
[PARA]FRAMELEN[/PARA]
(Frame Max Length) and
[PARA]SUBFRAMELEN[/PA
RA](Sub Frame Max Length)
is greater than 4.

STM1

None

9 None

NCMU

None

16 None

NCMU

None

The parameter is valid when

[PARA]AIDST[/PARA] in
[MML]SET
OBJALMSHLD[/MML]is set
to "ONEBYONE".
The parameter is valid when
[PARA]SN[/PARA] in
[MML]SET
OBJALMSHLD[/MML]is
valid.

None

NodeB

None

NodeB

None

NodeB

None

NodeB

You must enter the

parameter when the ALD
system type
[PARA]AST[/PARA]in
[MML]SET
ALDPWRSW[/MML] is set to
"CUSTOM".
Alarm Clear Threshold must
be
satisfied:UOTHD<UCTHD<
OOTHD;UOTHD<OCTHD<
OOTHD

D128

IMA Group

None

NodeB

None

NodeB

You must enter the

parameter when the ALD
system type
[PARA]AST[/PARA]in
[MML]SET
ALDPWRSW[/MML] is set to
"CUSTOM".
Alarm Clear Threshold must
be
satisfied:UOTHD<UCTHD<
OOTHD;UOTHD<OCTHD<
OOTHD

DEV

NodeB

None

V1.1

NodeB

None

NAME

None

NodeB

None

Cell

None

NodeB

[PARA]OTH[/PARA] is more
than [PARA]LTH[/PARA] in
[MML]SET THAT[/MML]

65 None

None

0 NodeB

None

DISABLE

None

NodeB

This paramter is valid when

[PARA]RTTYPE[/PARA] in
[MML]ADD IPRT[/MML] is
set to IF.
The value range is 0~7 when
[PARA]PT[/PARA] is PPP
and [PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~15
when [PARA]PT[/PARA] is
PPP and [PARA]SBT[/PARA]
is E1_COVERBOARD;
The value range is 0~1 when
[PARA]PT[/PARA] is MPGRP
and [PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~3 when
[PARA]PT[/PARA] is MPGRP
and [PARA]SBT[/PARA] is
E1_COVERBOARD;

This parameter is valid only

when
[PARA]RTTYPE[/PARA] in
[MML]ADD IPRT[/MML] is
set to IF.

IMA Group(ADD
IMAGRP)
0
IMA Link(ADD
IMALNK)

The value range is 0~1 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~3 when
[PARA]SBT[/PARA] is
E1_COVERBOARD;

0 IMA Link

The value range is 0~3 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~7 when
[PARA]SBT[/PARA] is
E1_COVERBOARD;

NodeB

This parameter is valid only

when
[PARA]VLANMODE[/PARA]
in [MML]ADD
VLANMAP[/MML] is set to
SINGLEVLAN.

None

ENABLE

[Link]

DISABLE

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

NodeB

ENABLE

MLPPP Group(ADD
MPGRP)
None
PPP Link(ADD
PPPLNK)

None

IP & ~mask cannot be 0

IP & mask cannot be 0
MLPPP Group(ADD IP & mask + ~mask cannot
MPGRP)
be 0xffffffff
PPP Link(ADD
IP & ~mask + mask cannot
PPPLNK)
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

AAL2 Path(ADD
AAL2PATH)
IP Path(ADD
IPPATH)
SAAL(ADD
SAALLNK)
Tree Link
PVC(ADD
TREELNKPVC)

None

NodeB

None

IUBCP

The value range is 0~63

when [PARA]BEAR[/PARA]
in [MML]ADD IUBCP[/MML]
is set to ATM.

0 None

[Link]

0 None

IUBCP

The value range is 0~19

when [PARA]BEAR[/PARA]
in [MML]ADD IUBCP[/MML]
is set to IPV4.

0 None

NodeB

None

IP & ~mask cannot be 0

IP & mask cannot be 0
MLPPP Group(ADD IP & mask + ~mask cannot
MPGRP)
be 0xffffffff
PPP Link(ADD
IP & ~mask + mask cannot
PPPLNK)
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

NodeB

This parameter is valid when

[PARA]TP[/PARA] in
[MML]ADD RRU[/MML] is
set to "BRANCH"

None

NodeB

None

SCTP

None

NodeB

IP & ~mask cannot be 0

IP & mask cannot be 0
IP & mask + ~mask cannot
be 0xffffffff
IP & ~mask + mask cannot
be 0xffffffff
Note: "~mask" indicates the
complement on mask.

None

NodeB

None

NodeB

None

NodeB

None

NodeB

Value Range:
BTS3900:
UPEA/ UPEB:0~7
MRRU:0~6
RHUB:0~3
PRRU:0
NEMU:0~35
BTS3900A:
UPEA/UPEB:0~7
MRRU:0~6
RHUB:0~3
PRRU:0
NPMU:5~7
DBS3900:
UPEA/UPEB:0~7
MRRU:0~6
RHUB:0~3
PRRU:0
NEMU:0~35
NPMU:5~7

None

[PARA]SBT[/PARA] is
NodeB(SET
BASE_BOARD.
0(SET
None(SET
HSDPAFLOWCTR
The value range is 0~7 when
HSDPAFLOWCTR HSDPAFLOWCTRLP LPARA)
[PARA]SBT[/PARA] is
LPARA)
ARA)
IMA Group/UNI
E1_COVERBOARD.
0(SET SCRAM)
None(SET SCRAM) Link/Fractional
The value range is 0~3 when
ATM(SET SCRAM)
[PARA]SBT[/PARA] is
BACK_BOARD.
Tree Link
PVC(ADD
1000
1000 TREELNKPVC)
None
AAL2 Path(ADD
AAL2PATH)
None

None

NodeB

None

ENABLE

MLPPP Group

None

SAAL

This parameter is valid when

[PARA]ST[/PARA] is set to
UBR+, and its value should
be smaller than the value of
[PARA]PCR[/PARA].

None

100

AAL2 Path(ADD
AAL2PATH)
Tree Link
PVC(ADD
TREELNKPVC)

This parameter is valid only

when the [PARA]ST[/PARA]
is UBR+, and the value of
this parameter is smaller
than the [PARA]PCR[/PARA]
value.

1 IMA Group

The value range is 1~4 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 1~8 when
[PARA]SBT[/PARA] is
E1_COVERBOARD;

100 MLPPP Group

The value of this parameter

cannot be smaller than that
of [PARA]MPDADT[/PARA].

None

NodeB

None

NodeB

None

NodeB

when the ALD system type

[PARA]AST[/PARA] in
[MML]SET
ALDPWRSW[/MML] is set to
"custom", the value range is
between R0A, R0B and
RET_PORT;
when the ALD system type
[PARA]AST[/PARA] in
[MML]SET
ALDPWRSWALD[/MML] is
set to
"RET_ONLY_MULTICORE",
the value range is only
RET_PORT;
otherwise the value range is
between R0A and R0B.
For the WRFU subrack, the
value range is between N0A
and N5A, N0B and N5B.
For the RRU, if the ALD
system type is custom, the
value range is between R0A,
R0B and RET_PORT, if the
ALD system type is
RET_ONLY_MULTICORE,
the value range is only
RET_PORT, otherwise the
value range is between R0A
and R0B.

None

NodeB

None

NodeB

When MODE = CUSTOM,

this parameter is valid. If the
parameter is not specified,
the existing type is not
changed.

None

APM100

None

NodeB

[PARA]PTYPE[/PARA] is
valid while
[PARA]CS[/PARA]=CONFIG
ED in [MML]SET
PWRSYSCFG[/MML]

None

NodeB

None

50 MLPPP Group

None

NodeB

The value of this parameter

cannot be greater than that
of [PARA]MPDAAT[/PARA].
[PARA]PWD[/PARA] is valid
while
[PARA]PKPEnableSta[/PAR
A]=Enable in [MML]SET
CERTFILE[/MML].

None

NodeB

5 Cell

This parameter is valid only

when
[PARA]CHRSW[/PARA]=ON
in [MML]SET CHRSW[/MML]

None

ABSOLUTE

Cell

This para is valid for

distribution cell.

None

NodeB

None

29000(ADD
LOCELL)

None

Cell

None

NodeB

None

MLPPP Group(ADD
MPGRP)
0
MLPPP Link(ADD
MPLNK)

The value range is 0~1 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~3 when
[PARA]SBT[/PARA] is
E1_COVERBOARD;

None

NodeB

None

NodeB

None

MLPPP Link(ADD
MPLNK)
1500
PPP Link(ADD
PPPLNK)

1500

DUAL

None

DUAL

NodeB

None

0 None

NodeB

None

Cell

None

NodeB

None

Cell

It is valid when
[PARA]RMTCM[/PARA] is
TRUE in [MML]ADD
LOCELL[/MML].

None

0 None

Cell

None

NodeB

None

DISABLE

MLPPP Group(ADD
MPGRP)
None
PPP Link(ADD
PPPLNK)

None

NodeB

None

RruName

SYNC(ADD
LOCELL)

None

Cell

This parameter is valid noly

When the
[PARA]SECT[/PARA] in
[MML]ADD SEC[/MML] is
DIST_SECTOR.

NodeB

None

CODE_PRI

Cell

None

NodeB

This parameter is valid when

[PARA]RTTYPE[/PARA] in
[MML]ADD IPRT[/MML] is
set to NEXTHOP.

None

NodeB

None

OPEN

None

Cell

None

NodeB

This parameter is valid only

when
[PARA]RSTMODE[/PARA] in
[MML]SET
CFGFILEENB[/MML] is set
to "ENABLE".

None

Timeslot Cross

The value range of

[PARA]SRCSN[/PARA] is
0~7 when [PARA]NO[/PARA]
is 0~7.
The value range of
[PARA]SRCSN[/PARA] is
0~5 when [PARA]NO[/PARA]
is 8~15.

None

Tree Link PVC

None

NodeB

Value Range:
BTS3900&BTS3900A:
MRRU, RHUB, PRRU ,
WRFU
DBS3900:
MRRU, RHUB , PRRU

None

IP Path

None

NodeB

None

NodeB

The LOCAL node must

already exist before the HUB
node is added.

PERFFIRST

None

NodeB

None

AAL2 Path

None

NodeB

None

0 None

NodeB

None

NodeB

None

DISABLE

IP Path

None

IP Path

None

AAL2 Path

None

SAAL

When the [PARA]ST[/PARA]

parameter in the MML
command is set to RTVBR,
NRTVBR, or UBR+, the
value of this parameter
should be greater than that
of [PARA]SCR[/PARA] or
[PARA]MCR[/PARA].

None

NodeB

None

NodeB

This parameter is valid only

when [PARA]SBS[/PARA] in
[MML]SET SUBBRD[/MML]
is set to "YES".

None

None(ADD LNKSRC)
None(ADD DEVIP)
-(ADD LNKSRC) None(ADD PPPLNK)
-(ADD DEVIP)
None(ADD
-(ADD PPPLNK)
AAL2PATH)
-(ADD AAL2PATH) None(ADD FRAATM)
-(ADD FRAATM)
None(ADD IMAGRP)
-(ADD IMAGRP)
None(ADD IMALNK)
-(ADD IMALNK)
None(ADD
-(ADD
IP2RSCGRP)
IP2RSCGRP)
None(ADD IPPATH)
-(ADD IPPATH)
None(ADD IPRT)
-(ADD IPRT)
None(ADD MPGRP)
-(ADD MPGRP)
None(ADD MPLNK)
-(ADD MPLNK)
None(ADD OMCH)
-(ADD OMCH)
None(ADD
-(ADD RSCGRP) RSCGRP)
-(ADD SAALLNK) None(ADD
-(ADD UNILNK)
SAALLNK)
-(ADD CFMMEP) None(ADD UNILNK)
-(ADD ETHTRK)
None(ADD
-(ADD
CFMMEP)
ETHTRKLNK)
None(ADD ETHTRK)
None(ADD
ETHTRKLNK)

-(SET
E1T1WORKMOD
E)
-(SET ETHPORT)
-(SET LR)
-(SET SCRAM)

None

None(SET
E1T1WORKMODE)
None(SET
ETHPORT)
None(SET LR)
None(SET SCRAM)

None

NodeB(ADD
LNKSRC)
NodeB(ADD
DEVIP)
PPP Link(ADD
PPPLNK)
AAL2 Path(ADD
AAL2PATH)
Fractional
ATM(ADD
FRAATM)
IMA Group(ADD
IMAGRP)
IMA Link(ADD
IMALNK)
NodeB(ADD
IP2RSCGRP)
IP Path(ADD
IPPATH)
NodeB(ADD IPRT)
MLPPP Group(ADD
MPGRP)
MLPPP Link(ADD
MPLNK)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)
SAAL(ADD
SAALLNK)
UNI Link(ADD
UNILNK)
ETH OAM(ADD
CFMMEP)
NodeB(ADD
ETHTRK)
NodeB(ADD
ETHTRKLNK)
NodeB(SET
E1T1WORKMODE
)
Ethport(SET
ETHPORT)
NodeB(SET LR)
IMA Group/UNI
Link/Fractional
ATM(SET SCRAM)

NodeB

28 Cell

When [PARA]SN[/PARA] is
in the range of 0~5, choose
E1_COVERBOARD.
When [PARA]SN[/PARA] is
in range of 6~7, choose
BASE_BOARD,
BACK_BOARD

When [PARA]SN[/PARA] is
in the range of 0~5, choose
E1_COVERBOARD.
When [PARA]SN[/PARA] is
in range of 6~7, choose
BASE_BOARD,
BACK_BOARD
When [PARA]SN[/PARA] is
in the range of 0~5, choose
E1_COVERBOARD.
When [PARA]SN[/PARA] is
in range of 6~7, choose
BASE_BOARD,
BACK_BOARD

It is valid when
[PARA]SCCHPWRCM[/PAR
A] is FIXED in [MML]SET
MACHSPARA[/MML].

None

Cell

None

None(ADD
CMBGROUP)

Cell

None
When the [PARA]ST[/PARA]
parameter in the MML
command is set to RTVBR,
NRTVBR, or UBR+, the
value of this parameter
should be greater than that
of [PARA]SCR[/PARA] or
[PARA]MCR[/PARA].

None

AAL2 Path(ADD
AAL2PATH)
Tree Link
PVC(ADD
TREELNKPVC)

None

None(ADD
SCTPLNK)
[Link](ADD
PPPLNK)
[Link](ADD
MPGRP)

SCTP(ADD
SCTPLNK)
PPP Link(ADD
None
PPPLNK)
MLPPP Group(ADD
MPGRP)

None

SCTP

None

ENABLE

MLPPP Link(ADD
MPLNK)
PPP Link(ADD
PPPLNK)

None

MLPPP Link(ADD
MPLNK)
PPP Link(ADD
PPPLNK)

The value range is 0~7 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~15
when [PARA]SBT[/PARA] is
E1_COVERBOARD;

60 None

NodeB

None

NodeB

None

ENABLE

0 None

None

NodeB

[PARA]SDAY[/PARA] is valid
while
[PARA]DST[/PARA]=YES
and [PARA]SM[/PARA] is
DATEWEEK or DATE in
[MML]SET TZ[/MML].

None

Battery

None

Battery

None

MLPPP Group(ADD
This parameter is mandatory
MPGRP)
if [PARA]AUTH[/PARA] is not
PPP Link(ADD
NONAUTH.
PPPLNK)

None

Cell

For BTS:When the value of

[PARA]SECT[/PARA] is
LOCAL_SECTOR, It's valua
is 0~5.

None

NodeB

This parameter is valid when

the operating mode is
SECTOR.

None

AAL2 Path

None

REMOTE_SECTO REMOTE_SECTOR(
R(ADD SEC)
ADD SEC)
Cell
-(ADD LOCELL)
None(ADD LOCELL)

None

For BTS, The para

LOCAL_SECTOR of
[MML]ADD SEC[/MML] is
valid and optional, When
[PARA]SECT[/PARA] is
LOCAL_SECTOR, It's value
should be 4 or 5.
For DBS, When
[PARA]SECT[/PARA] is
REMOTE_SECTOR, It's
value should be ROA and
R0B
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to OPE and
[PARA]OPEVER[/PARA] is
set to V1.1.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]OPESORT[/PARA] is
set to OPE and
[PARA]OPEVER[/PARA] is
set to V2.0_3GPP.

None

FIXED

Cell

It is valid when
[PARA]SEHICHPCPARA[/PA
RA] is YES in [MML]SET
MACEPARA[/MML].

None

Cell

None

-197 Cell

None

It is valid when
[PARA]SEHICHPCMOD[/PA
RA] is FIXED in [MML]SET
MACEPARA[/MML].

96 Cell

It is valid when
[PARA]SEHICHPCMOD[/PA
RA] is RNC_BASED,
FOLLOW_TPC in [MML]SET
MACEPARA[/MML].

None

FIXED

Cell

It is valid when
[PARA]SERGCHPCPARA[/P
ARA] is YES in [MML]SET
MACEPARA[/MML].

None

Cell

None

-210 Cell

It is valid when
[PARA]SERGCHPCMOD[/P
ARA] is FIXED in [MML]SET
MACEPARA[/MML].

100 Cell

It is valid when
[PARA]SERGCHPCMOD[/P
ARA] is RNC_BASED,
FOLLOW_TPC in [MML]SET
MACEPARA[/MML].

None

NodeB

None

This parameter is valid when

in [MML]SET
ALDDEV[/MML]
[PARA]DEVVER[/PARA] is
set to DEV .

None

NodeB

None

None(ADD
CMBGROUP)

NodeB

None

NodeB

None

3000

None

MLPPP Link(ADD
MPLNK)
3000
PPP Link(ADD
PPPLNK)

None

-243 Cell

It is valid when
[PARA]SEHICHPCMOD[/PA
RA] is FIXED in [MML]SET
MACEPARA[/MML].

IP Path

None

NodeB

[PARA]SM[/PARA] is valid
while
[PARA]DST[/PARA]=YES in
[MML]SET TZ[/MML].

None

EPF

Cell

None

NodeB

[PARA]SMONTH[/PARA] is
valid while
[PARA]DST[/PARA]=YES
and [PARA]SM[/PARA] is
DATEWEEK or DATE in
[MML]SET TZ[/MML].

None

NodeB

Slot No. Board type

0 0 0~3 WBBPa
(WCDMA BaseBand
Process unit type A)
\WBBPb (WCDMA
BaseBand Process unit type
B) \UTRP (Universal
extension TRansmission
Processing unit)
0 0 0~5 UTRP (Universal
extension TRansmission
Processing unit)
0 0 6~7 WMPT
(WCDMA Main Processing &
Transmission unit)
0 0 16 UBF (Universal
BBU Fan unit)
0 0 18~19
UPEA(Universal Power and
Environment interface unit
type A(-48V))
\UPEB(Universal Power and
Environment interface unit
type B(24V))
\UEIU(Universal
Environment Interface Unit)
0 4 0~5 WRFU (WCDMA
Radio Frequency Unit)
0 6 0 NEMU (NodeB
Environment Monitoring
Unit)
0 7 0 NPMU (NodeB
Power Monitoring Unit)
0 11 0 NFAN (NodeB
FAN Box)
0 20~254 0
MRRU\RHUB\PRRU (Radio
Remote Unit)

None(ADD
PPPLNK)
None(ADD
AAL2PATH)
None(ADD
FRAATM)
None(ADD
IMAGRP)
None(ADD
IMALNK)
None(ADD
IP2RSCGRP)
None(ADD
IPCLKLNK)
None(ADD
IPPATH)
None(ADD IPRT)
None(ADD
MPGRP)
None(ADD
MPLNK)
None(ADD OMCH)
None(ADD
RSCGRP)
None(ADD
SAALLNK)
None(ADD
SCTPLNK)
None(ADD
UNILNK)
None(ADD
CFMMA)
None(ADD
CFMMEP)
None(ADD
BFDSESSION)
None(ADD
ETHTRK)
None(SET
E1T1BEAR)
None(SET
E1T1LOP)
None(SET
E1T1WORKMOD
E)
None(SET
ETHPORT)
None(SET
HSDPAFLOWCTR
LPARA)
None(SET
IPREMOTELOOP)
None(SET LR)
None(SET
SCRAM)

None(ADD LNKSRC)
None(ADD DEVIP)
None(ADD PPPLNK)
None(ADD
AAL2PATH)
None(ADD FRAATM)
None(ADD IMAGRP)
None(ADD IMALNK)
None(ADD
IP2RSCGRP)
None(ADD
IPCLKLNK)
None(ADD IPPATH)
None(ADD IPRT)
None(ADD MPGRP)
None(ADD MPLNK)
None(ADD OMCH)
None(ADD
RSCGRP)
None(ADD
SAALLNK)
None(ADD
SCTPLNK)
None(ADD UNILNK)
None(ADD CFMMA)
None(ADD
CFMMEP)
None(ADD
BFDSESSION)
None(ADD ETHTRK)
None(ADD
ETHTRKLNK)

None(SET
E1T1BEAR)
None(SET
E1T1LOP)
None(SET
E1T1WORKMODE)
None(SET
ETHPORT)
None(SET
HSDPAFLOWCTRLP
ARA)
None(SET
IPREMOTELOOP)
None(SET LR)
None(SET SCRAM)

l)
ADD
FRAATM(Optional)
ADD
IMAGRP(Optional)
ADD
IMALNK(Optional)
ADD
IP2RSCGRP(Optio
nal)
ADD
IPCLKLNK(Optiona
l)
ADD
IPPATH(Optional)
ADD
IPRT(Optional)
ADD
MPGRP(Optional) None
ADD
MPLNK(Optional)
ADD
OMCH(Optional)
ADD
RSCGRP(Optional)
ADD
SAALLNK(Optional
)
ADD
SCTPLNK(Optional
)
ADD
UNILNK(Optional)
ADD
CFMMA(Optional)
ADD
CFMMEP(Optional)
NodeB(SET
E1T1BEAR)
NodeB(SET
E1T1LOP)
NodeB(SET
E1T1WORKMODE
)
Ethport(SET
ETHPORT)
None
NodeB(SET
HSDPAFLOWCTR
LPARA)
NodeB(SET
IPREMOTELOOP)
NodeB(SET LR)
IMA Group/UNI
Link/Fractional
ATM(SET SCRAM)

None

Cell

None

Cell

0 Cell

When [PARA]SECT[/PARA]
is set to
REMOTE_SECTOR, the
value range is 0.
When [PARA]SECT[/PARA]
is LOCAL_SECTOR, the
value range is 0~5.
When [PARA]SECT[/PARA]
is set to
REMOTE_SECTOR, the
value range is 0.
When [PARA]SECT[/PARA]
is LOCAL_SECTOR, the
value range is 0~5.
This para is valid, when
[PARA]SECT[/PARA] is
DIST_SECTOR
This para is valid, when
[PARA]SECT[/PARA] is
DIST_SECTOR

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

NEMU

The parameter is valid only

when the
[PARA]TYPE[/PARA] in
[MML]SET
NEMUANLGIN[/MML] is set
to "VOLTAGE".

None

0 None

When the
[PARA]HISPM[/PARA] in
[MML]ADD LOCELL[/MML]
is TRUE.

None

0 None

None

No involved

When the value range of

[PARA]SRCSN[/PARA] is
6~7,
[PARA]SRCSBT[/PARA] is
BASE_BOARD.

None(ADD
-(ADD
TREELNKPVC)
TREELNKPVC)
None(ADD
-(ADD TSCROSS)
TSCROSS)

NodeB(ADD
TREELNKPVC)
NodeB(ADD
TSCROSS)

When the value range of

[PARA]SRCSN[/PARA] is
0~5,
[PARA]SRCSBT[/PARA] is
E1_COVERBOARD.

None

NodeB

None

ENABLE

None

NodeB

The value range is 0~7 when

the value range of
[PARA]NO[/PARA] in
[MML]ADD
TSCROSS[/MML] is 0~7;
The value range is 0~5 when
the value range of
[PARA]NO[/PARA] in
[MML]ADD
TSCROSS[/MML] is 8~15;
The [PARA]SRCSN[/PARA]
and [PARA]DSTSN[/PARA]
should be different.

None

NodeB

None

NodeB

When SBT is
BASE_BOARD, choose
NEXTHOP or IF
When SBT is
E1_COVERBOARD,
choose IF

None

None
MASTER(SET
HTPROTECT)
MASTER(SET
BCFCVOLTAGE)
MASTER(STR
E1T1RTTST)
None(ADD
OBJALMSHLD)
MASTER(SET
TMAGAIN)
MASTER(ADD
RRU)
MASTER(SET
ACDCVLIMIT)
MASTER(SET
BATATPA)
MASTER(SET
BATCTPA)
MASTER(SET
OUTPORT)
MASTER(SET
PWRSYSCFG)
MASTER(SET
SUBBRD)
MASTER(SET
TILTAER)
MASTER(SET
SASUDCLD)
MASTER(SET
SASUDCSW)
MASTER(SET
SASUGAIN)
MASTER(SET
ANTTILT)
MASTER(ADD
NPSU)
MASTER(SET

None

IP Path

The value range is

8~100000 when
[PARA]PT[/PARA] is ETH;
The value range is 8~1984
when [PARA]PT[/PARA] is
PPP;
The value range is 8~31744
when [PARA]PT[/PARA] is
MPGRP;

88 Cell
BATTST)
MASTER(SET
HTPROTECT)
MASTER(SET
BCFCVOLTAGE)
MASTER(STR
E1T1RTTST)
None(ADD
OBJALMSHLD)
MASTER(SET
TMAGAIN)
MASTER(ADD RRU)
MASTER(SET
ACDCVLIMIT)
MASTER(SET
BATATPA)
MASTER(SET
BATCTPA)
MASTER(SET
NodeB
OUTPORT)
MASTER(SET
PWRSYSCFG)
MASTER(SET
SUBBRD)
MASTER(SET
TILTAER)
MASTER(SET
SASUDCLD)
MASTER(SET
SASUDCSW)
MASTER(SET
SASUGAIN)
MASTER(SET
ANTTILT)
MASTER(ADD
NPSU)
MASTER(SET
SDPA)

It is valid when
[PARA]SEHICHPCMOD[/PA
RA] is RNC_BASED,
FOLLOW_TPC in [MML]SET
MACEPARA[/MML].
BaseBand Process unit type
B) \UTRP (Universal
extension TRansmission
Processing unit)
0 0 4~5 UTRP (Universal
extension TRansmission
Processing unit)

0 0 6~7 WMPT (WCDMA

Main Processing &
Transmission unit)

0 0 16 UBF (Universal BBU

Fan unit)

0 0 18~19 UPEA(Universal
Power and Environment
interface unit type A(48V)) \UPEB(Universal
Power and Environment
interface unit type B(24V))
\UEIU(Universal
Environment Interface Unit)
0 6 0 NEMU (NodeB
Environment Monitoring
Unit)

0 7 0 NPMU (NodeB Power

Monitoring Unit)

AAL2PATH)
Fractional
ATM(ADD
FRAATM)
IMA Group(ADD
-(ADD LNKSRC)
IMAGRP)
-(ADD DEVIP)
IMA Link(ADD
-(ADD PPPLNK)
IMALNK)
-(ADD AAL2PATH)
NodeB(ADD
-(ADD FRAATM)
IP2RSCGRP)
-(ADD IMAGRP)
NodeB(ADD
-(ADD IMALNK)
IPCLKLNK)
-(ADD
IP Path(ADD
IP2RSCGRP)
IPPATH)
-(ADD IPCLKLNK)
NodeB(ADD IPRT)
-(ADD IPPATH)
MLPPP Group(ADD
-(ADD IPRT)
MPGRP)
-(ADD MPGRP)
MLPPP Link(ADD
-(ADD MPLNK)
MPLNK)
-(ADD OMCH)
None
OMCH(ADD
-(ADD RSCGRP)
OMCH)
-(ADD SAALLNK)
NodeB(ADD
-(ADD SCTPLNK)
RSCGRP)
-(ADD
SAAL(ADD
TREELNKPVC)
SAALLNK)
-(ADD TSCROSS)
SCTP(ADD
-(ADD UNILNK)
SCTPLNK)
-(ADD CFMMA)
Tree Link
-(ADD CFMMEP)
PVC(ADD
-(ADD
TREELNKPVC)
BFDSESSION)
Timeslot
-(ADD ETHTRK)
Cross(ADD
-(ADD
TSCROSS)
ETHTRKLNK)
UNI Link(ADD
UNILNK)
ETH OAM(ADD
CFMMA)
ETH OAM(ADD
NodeB(SET
None(SET
E1T1BEAR)
E1T1BEAR)
None(SET
NodeB(SET
None(SET
E1T1BEAR)
E1T1LOP)
E1T1LOP)
None(SET
NodeB(SET
None(SET
E1T1LOP)
E1T1WORKMODE
E1T1WORKMOD None(SET
)
E)
E1T1WORKMODE)
Ethport(SET
None(SET
None(SET
ETHPORT)
ETHPORT)
ETHPORT)
None
NodeB(SET
None(SET
None(SET
HSDPAFLOWCTR
HSDPAFLOWCTR HSDPAFLOWCTRLP
LPARA)
LPARA)
ARA)
NodeB(SET
None(SET
None(SET
IPREMOTELOOP)
IPREMOTELOOP) IPREMOTELOOP)
NodeB(SET LR)
None(SET LR)
None(SET LR)
IMA Group/UNI
None(SET
None(SET SCRAM)
Link/Fractional
SCRAM)
ATM(SET SCRAM)
None(ADD LNKSRC)
None(ADD DEVIP)
None(ADD PPPLNK)
None(ADD
AAL2PATH)
None(ADD FRAATM)
None(ADD IMAGRP)
None(ADD IMALNK)
None(ADD
IP2RSCGRP)
None(ADD
IPCLKLNK)
None(ADD IPPATH)
None(ADD IPRT)
None(ADD MPGRP)
None(ADD MPLNK)
None(ADD OMCH)
None(ADD
RSCGRP)
None(ADD
SAALLNK)
None(ADD
SCTPLNK)
None(ADD
TREELNKPVC)
None(ADD
TSCROSS)
None(ADD UNILNK)
None(ADD CFMMA)
None(ADD
CFMMEP)
None(ADD
BFDSESSION)
None(ADD ETHTRK)
None(ADD
ETHTRKLNK)

None

Cell

None

Cell

None

Cell

None

Cell

None

When [PARA]SECT[/PARA]
is set to
REMOTE_SECTOR, the
value range is 20~254.
When [PARA]SECT[/PARA]
is LOCAL_SECTOR, the
value of this para is 4~5.
When [PARA]SECT[/PARA]
is set to
REMOTE_SECTOR, the
value range is 20~254.
When [PARA]SECT[/PARA]
is LOCAL_SECTOR, the
value of this para is 4~5.
This para is valid, when
[PARA]SECT[/PARA] is
DIST_SECTOR
This para is valid, when
[PARA]SECT[/PARA] is
DIST_SECTOR

0 NodeB

None

0 NodeB

None

0 NodeB

None

0 NodeB

None

0 NodeB

None

0 NodeB

None

0 NodeB

None

0 NodeB

None

NodeB

None

EARLIER_VER

None

STM1

This parameter is valid when

the [PARA]RSW[/PARA] is
ENABLE.
When [PARA]TB[/PARA] is
J0: TRACE_1BYTE and
TRACE_16BYTE and
TRACE_64BYTE is valid.
When [PARA]TB[/PARA] is
J1: TRACE_16BYTE and
TRACE_64BYTE is valid.
When [PARA]TB[/PARA] is
J2: TRACE_16BYTE is valid.

STM1

when [PARA]ST[/PARA] in
[MML]ADD
AAL2PATH[/MML] is set to
RTVBR or NRTVBR, and
the value of this parameter
should be smaller than the
[PARA]PCR[/PARA] value.

None

NodeB

None

NodeB

This parameter is valid when

the operating mode is
SECTOR.

None

NodeB

None

ENABLE

0 None

Fractional
ATM(ADD
FRAATM)
IMA Group(ADD
IMAGRP)
UNI Link(ADD
UNILNK)

SCTP

None

NodeB

This parameter is invalid

when [PARA]DEVTP[/PARA]
in [MML]ADD ALD[/MML] is
set to "SINGLE_RET"

None

NodeB

None

[Link]

None

SCTP

None

NodeB

[PARA]SWEEK[/PARA] is
valid while
[PARA]DST[/PARA]=YES
and [PARA]SM[/PARA] is
DATEWEEK or WEEK in
[MML]SET TZ[/MML].

None

[Link]

None

SCTP

None

NodeB

None

Cell

None

NodeB

[PARA]SWSEQ[/PARA] is
valid while
[PARA]DST[/PARA]=YES
and
[PARA]SM[/PARA]=WEEK in
[MML]SET TZ[/MML].

None

NodeB

None

80 NodeB

None

MASTER

None

0 None

120 None

NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
"RING"

Tree Link PVC

This parameter is valid only

when
[PARA]JNRSCGRP[/PARA]
in [MML]ADD
TREELNKPVC[/MML] is set
to ENABLE.

Battery

The TDSTM is valid only

when
[PARA]ATMODE[/PARA] in
[MML]SET BATATPA[/MML]
is set to PERIOD or
[Link]
DDSTM value must be
smaller than TDSTM value.

None

NodeB

None

This parameter is valid when

in [MML]SET
ALDDEV[/MML]
[PARA]DEVVER[/PARA] is
set to OPE and
[PARA]DEVVER[/PARA] is
set to V1.1.
This parameter is valid when
in [MML]SET
ALDDEV[/MML]
[PARA]DEVVER[/PARA] is
set to DEV and
[PARA]DEVVER[/PARA] is
set to V2.0_3GPP.

None

Timeslot Cross

[ADD TSCROSS]
When the source or
destination port of the
timeslot cross connection is
carried at the WMPT,
TscrossNo ranges from 0 to
7. When the source or
destination ports of the
timeslot cross connection
are carried at the UAEC,
TscrossNo ranges from 0 to
15.
The source E1/T1 link over
which timeslot cross
connection is configured
cannot carry the
IMA/UNI/FRAATM link or the
PPP/MP link.
For a timeslot cross
connection, the source and
destination timeslots can be
different timeslots at different
boards. The number of
source timeslots, however,
must be equal to that of the
destination timeslots.
If the sub-board type is
BASE_BOARD, only eight
timeslot cross connections
are supported.
The number of
[PARA]DSTTSN[/PARA] and
[PARA]SRCTSN[/PARA]
timeslots must be equal.

None

Tree Link PVC

This parameter is valid only

when [PARA]VST[/PARA] in
[MML]ADD
TREELNKPVC[/MML] is set
to VC_SWITCH.

None

Tree Link PVC

None

[PARA]TLL[/PARA] is less
than [PARA]TUL[/PARA]
in[MML]MOD
NEMUTHLIMIT[/MML]

None

45 None

None

NCMU

None

NodeB

It is valid when
[PARA]MANUALSW[/PARA]
is ON in [MML]SET
EMGLICENSE[/MML].

None

NodeB

[PARA]TO[/PARA] is valid
while
[PARA]DST[/PARA]=YES in
[MML]SET TZ[/MML].

None

NodeB

None

NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
"RING"

RTVBR

None

Tree Link PVC

None

RTVBR

None

AAL2 Path

None

0 None

None

127

ENABLE

STM1

The value is 0 when

[PARA]SBT[/PARA] is
CHANNELLED_COVERBO
ARD;
The value range is 0~1 when
[PARA]SBT[/PARA] is
UNCHANNELLED_COVER
BOARD;

NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
"RING"

0 NodeB

This parameter is valid only

when [PARA]TT[/PARA] in
[MML]ADD
RRUCHAIN[/MML] is set to
"RING"

NodeB

None

[PARA]TLL[/PARA] is less
than [PARA]TUL[/PARA]
in[MML]MOD
NEMUTHLIMIT[/MML]

127 IP Path

None

This parameter is valid only

STM1

Only ENABLE is valid when

[PARA]TB[/PARA] is J2.

STM1

The value range is J0~J2

when [PARA]SBT[/PARA] is
CHANNELLED_COVERBO
ARD;
The value range is J0~J1
when [PARA]SBT[/PARA] is
UNCHANNELLED_COVER
BOARD;

DISABLE

1 IP Path

None

IMA Group(ADD
IMAGRP)
UNI Link(ADD
UNILNK)

This parameter is valid only

when in [MML]ADD
IPPATH[/MML] the value of
[PARA]PT[/PARA] is set to
ETH and
[PARA]FPMUXSWITCH[/PA
RA] is set to ENABLE.

None

0 NodeB

None

NodeB

None

MLPPP Link(ADD
MPLNK)
PPP Link(ADD
PPPLNK)
Fractional
ATM(ADD
FRAATM)

None

IP Path

The value range is

8~100000 when
[PARA]PT[/PARA] is ETH.
The value range is 8~1984
when [PARA]PT[/PARA] is
PPP.
The value range is 8~31744
when [PARA]PT[/PARA] is
MPGRP.

None

NodeB

None

NEMU

None

NodeB

You must enter the

parameter when the ALD
system type
[PARA]AST[/PARA]in
[MML]SET
ALDPWRSW[/MML] is set to
"CUSTOM".
Alarm Clear Threshold must
be
satisfied:UOTHD<UCTHD<
OOTHD;UOTHD<OCTHD<
OOTHD

None

100(ADD SEC)

57 NodeB

None

100(ADD SEC)

UL is more than
[PARA]LL[/PARA] in
[MML]SET
NEMUINVLIMIT[/MML]

NodeB

When [PARA]PT[/PARA] in
[MML]SET ALMPORT[/MML]
is VALUE, this parameter is
valid.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B, N0A, N0B, N1A,
N1B, N2A, N2B, N3A, N3B,
N4A, N4B, N5A, N5B.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B, N0A, N0B, N1A,
N1B, N2A, N2B, N3A, N3B,
N4A, N4B, N5A, N5B.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B, N0A, N0B, N1A,
N1B, N2A, N2B, N3A, N3B,
N4A, N4B, N5A, N5B.

Cell

For DBS:It is valid when

[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B.
For BTS:It is valid when
[PARA]ANT1N[/PARA] in
[MML]ADD SEC[/MML] is
R0A, R0B, N0A, N0B, N1A,
N1B, N2A, N2B, N3A, N3B,
N4A, N4B, N5A, N5B.

None

Cell

None

NodeB

None

Cell

None

0 None

None

IP Path

None

IP Path

None

NodeB

You must enter the

parameter when the ALD
system type
[PARA]AST[/PARA]in
[MML]SET
ALDPWRSW[/MML] is set to
"CUSTOM".
Alarm Clear Threshold must
be
satisfied:UOTHD<UCTHD<
OOTHD;UOTHD<OCTHD<
OOTHD

None

Cell

None

NodeB

None

STM1

This parameter is valid when

[PARA]SW[/PARA] is
ENABLE
When [PARA]SBT[/PARA] is
UNCHANNELLED_COVER
BOARD, only
TRACE_64BYTE is valid.
When [PARA]SBT[/PARA] is
CHANNELLED_COVERBO
ARD:
For [PARA]TB[/PARA]=J0,
TRACE_1BYTE ,
TRACE_16BYTE and
TRACE_64BYTE are valid.
For [PARA]TB[/PARA]=J1,
TRACE_16BYTE and
TRACE_64BYTE are valid.
For [PARA]TB[/PARA]=J2,
TRACE_16BYTE is valid.

None

STM1

This parameter is valid when

[PARA]SW[/PARA] is
ENABLE.
It should be A integer(0~255)
or a string consist of single
space, A-Z, a-z, 0-9.
When
[PARA]TXT[/PARA]=TRACE
_1BYTE, it should be an
integer(0~255).
When
[PARA]TXT[/PARA]=TRACE
_16BYTE, it should be a
string which length is not
more than 15.
When
[PARA]TXT[/PARA]=TRACE
_64BYTE, it should be a
string which length is not
more than 62.

None

NodeB

None

STM1

This parameter is valid when

[PARA]TXT[/PARA] is
TRACE_16BYTE or
TRACE_64BYTE.

EARLIER_VER

None

MLPPP Group(ADD
This parameter is mandatory
MPGRP)
if [PARA]AUTH[/PARA] is not
PPP Link(ADD
NONAUTH.
PPPLNK)

0 None

UNI Link

The value range is 0~3 when

[PARA]SBT[/PARA] is
BASE_BOARD.
The value range is 0~7 when
[PARA]SBT[/PARA] is
E1_COVERBOARD.
None

None

AAL2 Path(ADD
AAL2PATH)
SAAL(ADD
SAALLNK)

V1.1

IMA Group

None

NodeB

[SET VLANCLASS]
A parameter is added.
Only eight different VLAN
IDs are allowed.
This parameter is valid only
when
[PARA]VLANMODE[/PARA]
in [MML]ADD
VLANMAP[/MML] is set to
SINGLEVLAN.

1 None

NodeB

This parameter is valid when

in [MML]ADD
VLANMAP[/MML]
[PARA]VLANMODE[/PARA]
is set to SINGLEVLAN and
[PARA]INSTAG[/PARA] is
set to ENABLE.

None

NodeB

None

NodeB

This parameter is valid when

[PARA]VLANMODE[/PARA]
in [MML]ADD
VLANMAP[/MML] is set to
SINGLEVLAN and
[PARA]INSTAG[/PARA] in
[MML]ADD
VLANMAP[/MML] is set to
ENABLE.

AAL2 Path(ADD
AAL2PATH)
SAAL(ADD
SAALLNK)

None

0 None

None

0 None

None

0 None

Tree Link PVC

None

NodeB

None

DEM_2_CHAN

NodeB

When the para

[PARA]WM[PARA] of
[MML]SET DEMODE[/MML]
is DEM_2_CHAN, There will
be 1 or 2 antena;
When the para
[PARA]WM[PARA] of
[MML]SET DEMODE[/MML]
is DEM_4_CHAN or
DEM_ECON_4_CHAN,
There will be 1 or 2 or 4
antenas;

None

NodeB

None

0 None

None

RRU

This parameter is valid when

[PARA]SD[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to ON.

0xFF

None

RRU

None

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 1~8.

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 1~8.

0 None

1 None

0 None

2 None

0 None

3 None

0 None

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 6~8.

2 None

1 None

3 None

1 None

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 7~8.

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 7~8.

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 8.

RRU

This parameter is valid when

[PARA]NMCA[/PARA] in
[MML]SET
RXINTDETSW[/MML] is set
to 8.

kbps

NodeB

The Rate Unit of a NodeB is

unitive

HW_DEFINED

NodeB

None

NodeB

This parameter is valid when

[PARA]ICPT[/PARA] in
[MML]ADD
IPCLKLNK[/MML] is set to
PTP.

0 None

MASTER

NodeB

None

ETH OAM

None

0 None

ETH OAM

None

ETH OAM

None

ETH OAM

None

NodeB

None

ETH OAM

None

ETH OAM

None

ETH OAM

None

ETH OAM

None

ETH OAM

When [PARA]SBT[/PARA] is
BASE_BOARD, choose
ETH(ETH);
When [PARA]SBT[/PARA] is
ETH_COVERBOARD,
choose ETH(ETH),
ETHTRK(ETHTRK);

ETH

None

ETH OAM

The value range is 0~3 when

[PARA]PT[/PARA] is ETH.
The value range is 0~1 when
[PARA]PT[/PARA] is
ETHTRK.

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

10 NodeB

None

10 NodeB

None

3 None

NodeB

None

0 None

NodeB

None

NodeB

None

DISABLE

None

NodeB

None

100 None

NodeB

None

0 None

NodeB

None

NodeB

None

2 Cell

None

4 Cell

None

CQI

Cell

None

CQI

Cell

None

10 Cell

NO_CQI_ADJ

Cell

This parameter is valid when

[PARA]HSSCCHPWRCTRL
METHODINDCH[/PARA] in
[MML]SET
MACHSPARA[/MML] is set
to CQI

None

NO_CQI_ADJ

None

Cell

7 Cell

None

This parameter is valid when

[PARA]CQIADJALGOFCON[
/PARA] in [MML]SET
MACHSPARA[/MML] is set
to CQI_ADJ_BY_RBLER

None

OPEN

Cell

None

OPEN

Cell

None

Cell

None

Cell

None

50 Cell

None

10 Cell

None

Cell

None

INHBOARD

CELL

None

GEN_POOL

INHBOARD

CELL

None

ENABLE

None

NodeB

None

NMCA is set to 4~8.

NMCA is set to 8.

AAL2 Path(ADD
AAL2PATH)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)
SAAL(ADD
SAALLNK)

When [PARA]SBT[/PARA] is
BASE_BOARD, choose IMA
(IMAGRP), UNI (UNILNK),
or FRAATM (FRAATM);
When [PARA]SBT[/PARA] is
CHANNELLED_COVERBO
ARD, choose IMA
(IMAGRP) or UNI (UNILNK);
When [PARA]SBT[/PARA] is
UNCHANNELLED_COVER
BARD, choose STM1
(Unchannelled STM1);
When [PARA]SBT[/PARA] is
E1_COVERBOARD,
choose IMA (IMAGRP), UNI
(UNILNK).

IMA

None

NodeB(ADD
DEVIP)
NodeB(ADD
IP2RSCGRP)
IP Path(ADD
IPPATH)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)

None

NodeB(ADD
DEVIP)
NodeB(ADD
IP2RSCGRP)
IP Path(ADD
IPPATH)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)

None

NodeB(ADD
LNKSRC)
NodeB(ADD
DEVIP)
PPP Link(ADD
PPPLNK)
Fractional
ATM(ADD
FRAATM)
IP Path(ADD
IPPATH)
MLPPP Link(ADD
MPLNK)
OMCH(ADD
OMCH)
SAAL(ADD
SAALLNK)

None

NodeB(ADD
DEVIP)
NodeB(ADD
IP2RSCGRP)
IP Path(ADD
IPPATH)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)

None

E1_COVERBOAR
E1_COVERBOARD
D

AAL2 Path(ADD
AAL2PATH)
OMCH(ADD
OMCH)
NodeB(ADD
RSCGRP)
SAAL(ADD
SAALLNK)

None

IMA Group(ADD
IMAGRP)
IMA Link(ADD
IMALNK)

The value range is 0~1 when

[PARA]SBT[/PARA] is
BASE_BOARD;
The value range is 0~3 when
[PARA]SBT[/PARA] is
E1_COVERBOARD;

MLPPP Group(ADD
MPGRP)
PPP Link(ADD
10
None
PPPLNK)
PPPoE Link(ADD
PPPOELNK)

MLPPP Group(ADD
MPGRP)
PPP Link(ADD
8
None
PPPLNK)
PPPoE Link(ADD
PPPOELNK)

E1_COVERBOAR
E1_COVERBOARD
D

MLPPP Group(ADD
MPGRP)
None
MLPPP Link(ADD
MPLNK)

None

MLPPP Link(ADD
MPLNK)

None

MLPPP Link(ADD
MPLNK)

None

MLPPP Link(ADD
MPLNK)

None

MLPPP Link(ADD
MPLNK)

None

MLPPP Link(ADD
MPLNK)

None

CRC_16

MLPPP Link(ADD
MPLNK)

None

ETH OAM

None

NodeB

None

NodeB

None

NodeB

None

NodeB

None

10 None

NodeB

None

95 None

NodeB

None

2 None

NodeB

None

1 None

NodeB

None

NodeB

None

NodeB

None

Access

Service Interrupted During Modification Interruption Scope

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

NodeB

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

The board be actived

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

N (No impact on the UE in idle mode)

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

NodeB

Read & Write

Read & Write

Not involved

NodeB

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Read & Write

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Read & Write

NodeB

Read & Write

Not involved

Read & Write

Read & Write

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

N (No impact on the UE in idle mode)

Not involved

Read Only

Not involved

Read Only

Not involved

Read Only

Not involved

Read & Write

Not involved

Read & Write

Not involved

Read & Write

No involved

Read Only

Not involved

Read Only

Not involved

Read Only

No involved

The parameter
modification has no
impact on the equipment.

Read & Write

Not involved

The parameter modification has no

impact on the equipment.

threshold of the NodeB lowers the
upper limit of the BER alarm threshold.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The configuration takes effect

immediately after the parameter is
modified.
This command is valid only for the
NEMU manufactured by Huawei.

Not involved

The delayed discharge test time has a

direct impact on power-off test, timing
test and manual background test.

SLAVE CP channel will not take effect.
If you disable this switch when the
NodeB is using the SLAVE CP
channel, the NodeB does not switch
to the MASTER CP when the
MASTER CP is restored. This switch
should be consistent with that of the
RNC to ensure communication.

The service is affected until the RRU

Chain configuration is correct

point position. The services of the

RRUs in this part are not affected.
Part two consists of the RRUs
between the break point position and
the chain tail. The RRUs in this part
are isolated, and the services are
disrupted. You can rectify the fault
through the RMV RRUCHAINBRKPOS
command. You can run the DSP
RRUCHAINSTATE command to query
the attributes of the CPRI interfaces of
the RRU.
For an RRU ring, two break points can
be set and the ring can be divided into
three parts:
Part one consists of the RRUs
between the ring head and the first
break point position. The services of
the RRUs in this part may be affected.
Part two consists of the RRUs
between the break point positions. The
RRUs in this part are isolated, and the
services are disrupted. You can rectify
the fault through the RMV
RRUCHAINBRKPOS command.
Part three consists of the RRUs
between the second break point
position and the ring tail. The services
of the RRUs in this part may be
affected.
For an RRU ring, the value of Break
Point1 should be larger than that of
Break Point2. For an RRU chain, only
the value of Break Point1 can be set.

Not involved

point position. The services of the

Not involved

To enable the DHCP Relay function,

you need to run [MML]ADD
DHCPSVRIP[/MML] to add the DHCP
Server IP address, and you may need
to run [MML]ADD IPRT[/MML] to add
related routes to ensure the current
NodeB can communicate with this IP
address.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The BSDV is valid only when the

BSDF is set to ENABLE.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Until be actived successfully.

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

impact on the equipment.

Not involved

For the E1 lines, the 75-ohm and 120ohm modes are supported; for the T1
lines, only the 100-ohm mode is
supported. After you modify the line
impedance by running this command,
you must reset the Iub interface board
manually to make your modification
valid.

Not involved

run mode.
The system clock works in free-run
mode when the clock source is faulty.
After the reference clock source is
restored, the NodeB uses the clock
source.
Ensure that the clock source is
available before running the command.
If the system uses the IP clock source,
the IP clock source can be configured
to automatic or manual mode. In
automatic IP mode, the IP source link
in a normal state and with a high
priority will be chosen as the clock
source. In manual IP mode, the
cabinet number, subrack number, slot
number, and IP link number are
required, and they can be configured
successfully.
The command cannot be run when the
clock quality test is being performed.
If the system responds with a "Clock
source is unavailable" message after
you run the command, do as follows:
For the LINE clock source, check
whether the LINE clock is configured
through the DSP LNKSRC command.
If not, add the LINE clock source
through the ADD LNKSRC command.
For the GPS card clock source, check
whether the GPS is configured through
the DSP GPS command. If the system
responds with no information, you can
infer that the NodeB does not support

Not involved

The parameter modification has no

impact on the equipment.

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Modifying battery installation time will

clear all the saved battery test results of The parameter modification has no
NPMU. The NPMU restarts saving
impact on the equipment.
battery test result.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

You can successfully run this

command only if the NCMU works
properly.
The configuration takes effect
immediately after the parameter is
modified.
The value of the Low Temperature
Critical Point must be smaller than that
of the High Temperature Critical Point.
This command is applicable to only the
NCMU of the direct-ventilation type
and that with a ventilation film.
This command can be run successfully
for the NCMU in the auxiliary power
system of the RRU only when the
power system is the APM30.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter cannot be equal to

[PARA]PEERIP[/PARA]. It is not
displayed when the value of
[PARA]LM[/PARA] is set to ALL or
NOLOOP.

Not involved

After this parameter is set, the

receiver sensibility will be reduced.
Adjust the receiver sensibility
according to network planning and
optimization.

Not involved

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

You can successfully run this

Not involved

You can successfully run this

Not involved

There must be a gap of no less than

5% between the upper limit and the
lower limit of the humidity.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter indicates the maximum

length of the FP before multiplexing.
The FP can be multiplexed only when
its frame length is smaller than this
value.

Not involved

The parameter modification has no

impact on the equipment.

impact on the equipment.

The service is affected until the

configuration is correct.

The service is interrupted if the

[PARA]CBS[/PARA] value is set too
small.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

The service is affected until the

configuration is correct.

The value of this parameter must be

smaller than the physical interface
rate.

The service is affected until the

configuration is correct.

The value of this parameter must be

smaller than the physical interface
rate.

The service is affected until the

configuration is correct.

This parameter must be consistent

with the peer Ethernet interface.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

The service is affected until the

configuration is correct.

This parameter must be consistent

with the [PARA]FRAME[/PARA]
parameter of the peer E1/T1 interface.

The service is affected until the

configuration is correct.

The available bandwidth of service is

affected when [PARA]Function[/PARA]
is set to ENABLE and
[PARA]ULCIR[/PARA] is set too small.

Not involved

The service is affected until the

configuration is correct.

This parameter must be consistent

with that of the peer Ethernet interface.

The service is affected when the

The service is re-established only when
[PARA]LM[/PARA] is set to REMOTE
the loop is cancelled.
or LOCAL.

The loop back mode can be

overwritten. The command only takes
effect with the IP packets of the UDP
The service is re-established only when
protocol. This command cannot be
the loop is cancelled.
executed with IP tracing at the same
time. Some services may be
interrupted.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

If the switch is set to ON, it is

recommended that you run the LST
VSWRLIMIT to query the current
VSWR limit before setting the VSWR
limit.

Not involved

The parameter modification has no

This parameter must be consistent

with that of the peer ethernet interface.

Not involved

The parameter modification has no

impact on the equipment.

The service is affected until the

with that of the peer Ethernet interface.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The value is valid only when the LSDF

is set to ENABLE.

Not involved

This parameter cannot be modified.

Not involved

You can successfully run this

Not involved

The parameter modification has no

impact on the equipment.

Not involved

You can successfully run this

after the parameter is set, and the old
users use the old parameter.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

If the SASU works in bypass mode, it

does not support tower-mounted
amplification

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

impact on the equipment.

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The output ports only exist on the

NEMU.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The remote cell group to be modified

must exist; It contains a string of up to
31 bytes.
The string should not be totally blanks
or contain the following characters: '
&lt ', ' &gt ', ' ! ', '?', ' ' ', ' " '. In
addition it will be ignored if the end of
the string is "\".

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

A string of up to 31 characters can be

entered. The string cannot be all
blanks or contain the following
characters such as ">", "<", "!", "?",
";", """, "'", ", ", or "\".

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

To specify the RRUs for a local cell in

the distributed sector, you may
repeatedly execute the command;
when you remove the ending RRU
from the cell, the command fails to be
executed.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

The type of the sub-board can be

modified only if the sub-board is
removed.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

It only takes effect on the new user

after the parameter is set, and the old
users use the old parameter. To modify
the Mac-hs scheduling parameters of
the specified local cell, ensure that the
local cell supports HSDPA.

Not involved

It only takes effect on the new user

after the parameter is set, and the old
users use the old parameter.

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

Not involved

This parameter cannot be modified.

Not involved

It only takes effect on the new user

after the parameter is set, and the old
users use the old parameter.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

It only takes effect on the new user

after the parameter is set, and the old
users use the old parameter. To modify
the Mac-hs scheduling parameters of
the specified local cell, ensure that the
local cell supports HSDPA.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Among the input parameters, the

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

Adjusting the downtilt of the RET

antenna may affect the antenna
coverage.
Ensure that you have calibrated the
RET antenna before setting the
downtilt of the antenna through the
CLB ANT command.
The tilt range supported by the RET
antenna varies with models and
vendors. It is recommended that you
list the tilt range supported by the
antenna through the LST
ANTTILTRNG command before
adjusting the tilt.
It takes up to nine minutes to set the
tilt of an RET antenna.
For the single polarization RET
antenna, ensure that the two RET
antennas connected to the
ANT_Tx/RxA and ANT_RxB
connectors have the same tilt.

Not involved

The site to be modified must exist; It

contains a string of up to 31 bytes.
The string should not be totally blanks
or contain the following characters: '
&lt ', ' &gt ', ' ! ', '?', ' ' ', ' " '. In
addition it will be ignored if the end of
the string is "\".

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

There must be a gap of no less than

3C between the upper limit and the
lower limit of the temperature

Not involved

You can successfully run this

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

impact on the equipment.

Not involved

You can run this command only if the

specified RRU works properly.
Normally, the RRU TX unit is set to
ON. If you set the RRU TX unit to OFF,
the cell in this RRU cannot work
properly.
After you run this command to set the
RRU TX unit to ON in case that the
RRU TX unit is OFF, the TX
transmission channel of the RRU is
unavailable until the logical cell is set
up and the carrier frequency is
configured for the RRU.

Not involved

This parameter cannot be modified.

Modifying delay may affect normal

Not involved

Modifying delay may affect normal

Not involved

This parameter cannot be modified

when the logical cell exists; The
downlink and uplink frequencies of the
local cell must stay within the same
frequency band; If the power amplify
unit can only support two carriers,
then in a Power Amplifier, the
difference between frequencies of
local cells must be greater or equal to
4.2MHz(21*0.2MHz), and be less or
equal to 5MHz(25*0.2MHz) ; If the
power amplify unit can support four
carriers, then in a Power Amplifier,
the difference between frequencies of
local cells must be greater or equal to
4.2MHz(21*0.2MHz), and be less or
equal to 15MHz(75*0.2MHz).

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

The parameter modification has no

impact on the equipment.

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

Not involved

The parameter modification has no

impact on the equipment.

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

If two clock links of the PTP protocol

are configured, the two clock links
must be in the same slot with the same
client address and domain value.

No involved

This parameter is affective when link

type is 1588 clock link.

No involved

Before the secondary homing

NCP/CCP is added, the
corresponding primary homing
NCP/CCP must exist.

No involved

The maintenance domain name must

be unique in one equipment.

No involved

None

No involved

The maintenance domain name must

be unique in one equipment.

No involved

The maintenance association name

must be unique in one maintenance
domain.

No involved

VLAN must be mapped with the

maintenance association.

No involved

Only in VLAN

No involved

Only in VLAN

No involved

A string of 12 characters is required

No involved

One RMEP can be assigned with up to

four IP addresses. The assigned IP
address cannot be in conflict with the
local IP address.

Not involved

This parameter cannot be modified.

Not involved

This parameter cannot be modified.

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

after the parameter is set, and the old
users use the old parameter.

None

This parameter cannot be modified.

None

This parameter cannot be modified.

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

No involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

Not involved

None

This parameter cannot be modified.

has no impact on the
equipment.

None

Versions earlier than

RAN11.0

The parameter modification

has no impact on the
equipment.

None

Versions earlier than

RAN11.0

The parameter modification

has no impact on the
equipment.

None

Versions earlier than

RAN11.0

Attribute

Radio

Transport

Equipment

Transport

Equipment

Radio

Equipment

Transport

Equipment

Radio

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Radio

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Radio

Equipment

Transport

Radio

Equipment

Radio

Equipment

Radio

Equipment

Radio

Transport

Equipment

Radio

Transport

Radio

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Radio

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Radio

Transport

Equipment

Transport

Equipment

Radio

Transport

Radio

Transport

Radio

Transport

Radio

Transport

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Radio

Equipment

Transport

Radio

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Radio

Equipment

Transport

Radio

Transport

Equipment

Radio

Equipment

Transport

Equipment

Radio

Transport

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Radio

Equipment

Transport

Radio

Transport

Equipment

Radio

Equipment

Transport

Radio

Equipment

Transport

Equipment

Transport

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Radio

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Equipment

Transport

Radio

Equipment

Transport

Equipment

Transport

Equipment

Parameter Reference
No ratings yet
Parameter Reference
862 pages
Nodeb para
No ratings yet
Nodeb para
1,210 pages
NodeB V200R013C00SPC339 Parameter Reference
No ratings yet
NodeB V200R013C00SPC339 Parameter Reference
2,835 pages
RNC Parameter Reference
No ratings yet
RNC Parameter Reference
283 pages
NodeB Parameter Reference
No ratings yet
NodeB Parameter Reference
1,413 pages
Huawei RNC Parameter Reference PDF
No ratings yet
Huawei RNC Parameter Reference PDF
1,783 pages
Huawei RNC Parameter Reference
100% (2)
Huawei RNC Parameter Reference
1,783 pages
RNC Parameter Reference
100% (1)
RNC Parameter Reference
2,167 pages
BSC6810 Parameter Reference
No ratings yet
BSC6810 Parameter Reference
1,261 pages
BSC6810 V200R011C00 Parameter Reference
No ratings yet
BSC6810 V200R011C00 Parameter Reference
1,136 pages
Huawei RNC-Parameter-Reference
No ratings yet
Huawei RNC-Parameter-Reference
2,133 pages
ZTE GSM Radio Network Parameters Guide
No ratings yet
ZTE GSM Radio Network Parameters Guide
18 pages
ZXUR 9000 UMTS Radio Parameters Guide
No ratings yet
ZXUR 9000 UMTS Radio Parameters Guide
955 pages
URFSTG00571-WCDMA RAN12 Network Performance Parameter Mapping (Ericsson W10, NSN RU10, RU20, ALU UA5.1-Huawei R012) - V2R2B01
No ratings yet
URFSTG00571-WCDMA RAN12 Network Performance Parameter Mapping (Ericsson W10, NSN RU10, RU20, ALU UA5.1-Huawei R012) - V2R2B01
87 pages
BTS3900 V100R008C00 (NodeB) Used Reserved Parameter List 09 (2014!05!30)
No ratings yet
BTS3900 V100R008C00 (NodeB) Used Reserved Parameter List 09 (2014!05!30)
39 pages
HUAWEI RAN Parameters Settings
No ratings yet
HUAWEI RAN Parameters Settings
129 pages
3G Parameter Reference
No ratings yet
3G Parameter Reference
18 pages
BTS3900 V100R012C00 ENodeBFunction Used Reserved Parameter List Draft B (2016!08!08)
100% (1)
BTS3900 V100R012C00 ENodeBFunction Used Reserved Parameter List Draft B (2016!08!08)
34 pages
ZXUR 9000 UMTS (V4.15.10.20) Radio Parameter Reference
No ratings yet
ZXUR 9000 UMTS (V4.15.10.20) Radio Parameter Reference
1,482 pages
RSVD para List NR
100% (1)
RSVD para List NR
1,346 pages
Enodeb Parameter Reference
No ratings yet
Enodeb Parameter Reference
25 pages
Enodeb Parameter Reference
No ratings yet
Enodeb Parameter Reference
811 pages
Huawei RAN Parameters Settings
100% (1)
Huawei RAN Parameters Settings
85 pages
Huawei Ran Parameters Settings PDF Free
No ratings yet
Huawei Ran Parameters Settings PDF Free
85 pages
WCDMA RNC BSC6810 LLD Report
No ratings yet
WCDMA RNC BSC6810 LLD Report
112 pages
BSC6900 GU V900R015C00SPC529 Used Reserved Parameter List
No ratings yet
BSC6900 GU V900R015C00SPC529 Used Reserved Parameter List
1,145 pages
4G ParameterReference
No ratings yet
4G ParameterReference
16 pages
BSC6900 GSM V900R011C00SPC720 Parameter Reference
No ratings yet
BSC6900 GSM V900R011C00SPC720 Parameter Reference
4,519 pages
ZTE UMTS Radio Parameter Guide
100% (1)
ZTE UMTS Radio Parameter Guide
1,500 pages
Huawei 9947 MML Command Reference
100% (3)
Huawei 9947 MML Command Reference
8,055 pages
Para List For GSM
No ratings yet
Para List For GSM
316 pages
Huawei RAN DMPI Parameter Settings
No ratings yet
Huawei RAN DMPI Parameter Settings
84 pages
Lcs Excel Template
No ratings yet
Lcs Excel Template
94 pages
ZTE SDR CM Optimization Guide
No ratings yet
ZTE SDR CM Optimization Guide
529 pages
BSC6910 GU V100R016C00SPC650 Parameter Reference
0% (1)
BSC6910 GU V100R016C00SPC650 Parameter Reference
597 pages
HUAWEI... Parameter Reference
No ratings yet
HUAWEI... Parameter Reference
4,362 pages
Alcatel Switch Command Guide
No ratings yet
Alcatel Switch Command Guide
9 pages
OMCR Operations and Performance Management
No ratings yet
OMCR Operations and Performance Management
63 pages
BSC6900 GSM V900R011C00SPC720 Parameter Reference
No ratings yet
BSC6900 GSM V900R011C00SPC720 Parameter Reference
4,299 pages
3G Parameter
No ratings yet
3G Parameter
44 pages
EMS Guide for TDD & FDD Management
No ratings yet
EMS Guide for TDD & FDD Management
27 pages
BTS3900 V100R012C00SPH006 NodeBFunction Parameter Reference
No ratings yet
BTS3900 V100R012C00SPH006 NodeBFunction Parameter Reference
1,473 pages
Huawei PRACH Parameter Recommendations
No ratings yet
Huawei PRACH Parameter Recommendations
50 pages
2G Huawei - NSN Parameter Comparison
No ratings yet
2G Huawei - NSN Parameter Comparison
79 pages
ZTE SDR CM Optimization Guide
No ratings yet
ZTE SDR CM Optimization Guide
529 pages
Huawei Router Configuration Details
No ratings yet
Huawei Router Configuration Details
8 pages
3900 Series Base Station ENodeBFunction Parameter Reference (V100R011C00 - 02) (XLS) - en
No ratings yet
3900 Series Base Station ENodeBFunction Parameter Reference (V100R011C00 - 02) (XLS) - en
11,418 pages
Parameters List For GSM (Huawei)
No ratings yet
Parameters List For GSM (Huawei)
487 pages
RB Power Distribution Analysis
No ratings yet
RB Power Distribution Analysis
9 pages
COMANDOS HUAWEI
No ratings yet
COMANDOS HUAWEI
5 pages
Parameter Reference
No ratings yet
Parameter Reference
7,270 pages
Huawei LTE Parameters Description
No ratings yet
Huawei LTE Parameters Description
24,162 pages
Paging - PO and PF Calculation
No ratings yet
Paging - PO and PF Calculation
132 pages
ENodeB Parameter Reference
100% (1)
ENodeB Parameter Reference
11,382 pages
B68L Installation
No ratings yet
B68L Installation
20 pages
Path Loss and Link Budget in GSM Systems
No ratings yet
Path Loss and Link Budget in GSM Systems
31 pages
Cellular Network Configuration
No ratings yet
Cellular Network Configuration
1 page
Jaybeam 5880100 SlimLine
No ratings yet
Jaybeam 5880100 SlimLine
2 pages
TDD LTE Vs FDD LTE
100% (1)
TDD LTE Vs FDD LTE
10 pages
Nemo Analyze Database Server Administration Guide Windows Server 2008 R2
No ratings yet
Nemo Analyze Database Server Administration Guide Windows Server 2008 R2
51 pages
B68L Installation
No ratings yet
B68L Installation
20 pages
Huawei UBBP
100% (1)
Huawei UBBP
11 pages
SQL DBX
No ratings yet
SQL DBX
49 pages
RNC Tour Configuration and Parameters
No ratings yet
RNC Tour Configuration and Parameters
1 page
Amphenol Antenna Specifications 2170 MHz
No ratings yet
Amphenol Antenna Specifications 2170 MHz
197 pages
Assignment 1 Computer Skills
No ratings yet
Assignment 1 Computer Skills
9 pages
Laser Gauge for Gap and Flush Measurement
No ratings yet
Laser Gauge for Gap and Flush Measurement
2 pages
UTP Fluxes
No ratings yet
UTP Fluxes
2 pages
Literature Review 410
No ratings yet
Literature Review 410
9 pages
Installation1 GB46108A0051 Part1
No ratings yet
Installation1 GB46108A0051 Part1
55 pages
New DPR 12-05-2025
No ratings yet
New DPR 12-05-2025
9 pages
Control System Tutorial-1
No ratings yet
Control System Tutorial-1
2 pages
Microwave Communication System Design
No ratings yet
Microwave Communication System Design
21 pages
AVO 380lgt Turbo 01
No ratings yet
AVO 380lgt Turbo 01
7 pages
Diff BW MOR and MOE
No ratings yet
Diff BW MOR and MOE
6 pages
Flo Tech Classic Turbine Datasheet
0% (1)
Flo Tech Classic Turbine Datasheet
2 pages
Construction Equipment Management Overview
83% (6)
Construction Equipment Management Overview
18 pages
Test Report 3919781
No ratings yet
Test Report 3919781
31 pages
SBI PO Exam Family Arrangement Questions
No ratings yet
SBI PO Exam Family Arrangement Questions
43 pages
Equipment Rental Index 2018-2019
No ratings yet
Equipment Rental Index 2018-2019
126 pages
Intelligence: Buran Ultrapulse: Donaldson. and Everything Just Got Better
No ratings yet
Intelligence: Buran Ultrapulse: Donaldson. and Everything Just Got Better
5 pages
Weld Inspection Report: CC Ep T R Ej Ec T
No ratings yet
Weld Inspection Report: CC Ep T R Ej Ec T
2 pages
1 Dep A
No ratings yet
1 Dep A
1 page
S275JR
No ratings yet
S275JR
1 page
AutoCAD Basics for High Schoolers
No ratings yet
AutoCAD Basics for High Schoolers
10 pages
16670-1 Lightning Protection System
No ratings yet
16670-1 Lightning Protection System
4 pages
Electrical Plan for 2-Storey Building
No ratings yet
Electrical Plan for 2-Storey Building
1 page
Uji Sondir dan Analisis Tanah
No ratings yet
Uji Sondir dan Analisis Tanah
11 pages
Roi of BPM Suites
No ratings yet
Roi of BPM Suites
18 pages
Thermo Paper
No ratings yet
Thermo Paper
10 pages
HSE Training Program Overview
0% (1)
HSE Training Program Overview
5 pages
Concrete Admixture Performance Guide
No ratings yet
Concrete Admixture Performance Guide
2 pages
Symbols, Units, and Conversion Factors: Appendix
No ratings yet
Symbols, Units, and Conversion Factors: Appendix
2 pages
Tincan Treatment Plant-2
No ratings yet
Tincan Treatment Plant-2
19 pages
Maxiair Company Profile
No ratings yet
Maxiair Company Profile
23 pages