IBM SPSS Statistics for Windows
Installation Instructions (Single User)
The following instructions are for installing IBM SPSS Statistics version 19 using a
single-user license. A single-user license allows you to install SPSS Statistics on up to two
computers, if those computers are used by one user.
System Requirements for IBM SPSS Statistics
The minimum hardware and software requirements for IBM SPSS Statistics are as follows:
Operating System
Microsoft Windows XP (32-bit version), Windows Vista (32-bit and 64-bit versions), or
Windows 7 (32-bit and 64-bit versions).
Configuration
Intel or AMD processor running at 1 gigahertz (GHz) or higher.
1 gigabyte (GB) of RAM or more.
800 megabytes (MB) of available hard-disk space. If you install more than one help language,
each additional language requires 60-70 MB of disk space.
DVD drive.
Super VGA (800x600) or a higher-resolution monitor.
For connecting with IBM SPSS Statistics Server, a network adapter running the TCP/IP
network protocol.
Authorization Code
You will also need your authorization code, which is delivered along with your software on
a separate sheet of paper or on the inside cover of the DVD case. If you downloaded SPSS
Statistics, your authorization code is available from your Asset Management Portal or from
[Link] The authorization code enables you to obtain a license for
Base and any SPSS Statistics add-on modules that you have purchased. If you cannot find your
authorization code, contact your sales representative. In some cases, you might have multiple
codes. You will need all of them.
Note: You cannot run SPSS Statistics remotely via Windows Terminal Services or Citrix with
a single-user license.
Copyright SPSS Inc. 1989, 2010
2
IBM SPSS Statistics for Windows Installation Instructions (Single User)
Installing IBM SPSS Statistics
Note: To install IBM SPSS Statistics, you must be logged on to your computer with
administrator privileges.
Running Multiple Versions and Upgrading from a Previous Release
You do not need to uninstall an old version of IBM SPSS Statistics before installing the new
version. Multiple versions can be installed and run on the same machine. However, do not install
the new version in the same directory in which a previous version is installed.
Note for IBM SPSS Statistics Developer
If you are installing IBM SPSS Statistics Developer, you can run the product standalone. You
can also install R Essentials and Python Essentials to develop with R and Python. For more
information, see the topic IBM SPSS Statistics Integration Plug-ins on p. 5 .
Installing from the DVD
Windows XP
E Insert the DVD into your DVD drive. The AutoPlay feature presents a menu.
E On the AutoPlay menu, click Install IBM SPSS Statistics, and then follow the instructions that
appear on the screen. See Notes for Installation for any special instructions.
Windows Vista or Windows 7
You must run the AutoPlay as administrator:
E Close the AutoPlay window that automatically appeared when you inserted the DVD into your
DVD drive.
E Using Windows Explorer, browse to the DVD drive.
E Right-click [Link] in the Windows subfolder and choose Run as Administrator.
E On the AutoPlay menu, click Install IBM SPSS Statistics, and then follow the instructions that
appear on the screen. See Notes for Installation for any special instructions.
Installing from a Downloaded File
Windows XP
E Double-click the file that you downloaded, and then follow the instructions that appear on the
screen. See Notes for Installation for any special instructions.
3
IBM SPSS Statistics for Windows Installation Instructions (Single User)
Windows Vista or Windows 7
You must run the installer as administrator:
E Using Windows Explorer, browse to folder where you downloaded the file.
E Right-click the downloaded file and choose Run as Administrator.
E Follow the instructions that appear on the screen. See Notes for Installation for any special
instructions.
Notes for Installation
This section contains special instructions for this installation.
License type. Be sure to select Single-User License.
Help language. IBM SPSS Statistics provides the ability to change the user interface language.
If you want the help language to always match the user interface language, select the languages
that you may use. Installing help for additional languages increases disk space requirements by
60-70 MB for each language. You can also install additional languages later by choosing to
change the installation in the Windows Control Panel.
Licensing Your Product
After the main part of the installation is complete, click OK to launch the License Authorization
Wizard. The License Authorization Wizard allows you to obtain a license for IBM SPSS
Statistics.
If you do not get a license now, you can enable SPSS Statistics to be used for a temporary usage
period. For IBM SPSS Statistics, all add-on modules are enabled. For IBM SPSS Statistics
Developer, only the Core system is enabled. After the temporary usage periodwhich begins
when the product is first usedSPSS Statistics will no longer run. Therefore, it is recommended
that you obtain a license as soon as possible. You must either obtain a license or enable for
temporary usage to use SPSS Statistics.
Note: Licenses are tied to your computers hardware with a lock code. If you replace your
computer or its hardware, you will have a new lock code and will need to repeat the authorization
process. If you find out that you exceeded the allowable number of authorizations specified in the
license agreement, contact your sales representative.
Warning: The license is sensitive to time changes. If you must change the system time and then
cannot run the product, contact SPSS Inc. Technical Support.
Using the License Authorization Wizard
Note: If you are running Windows Vista, you may be prompted for administrator credentials.
Without the correct credentials, you will not be able to run the License Authorization Wizard.
E If you dont launch the License Authorization Wizard during installation or cancel the License
Authorization Wizard before obtaining a license, you can launch it by choosing License
4
IBM SPSS Statistics for Windows Installation Instructions (Single User)
Authorization Wizard in the Windows Start menu program group for IBM SPSS Statistics. On
Windows Vista or 7, you must run as administrator. Right-click the License Authorization Wizard
shortcut and choose Run As Administrator.
E When prompted, choose License my product now. If you want to enable for temporary usage
instead, refer to Enabling for Temporary Usage on p. 4 .
E When prompted, enter one or more authorization codes. If you received a physical copy
of the installation media, authorization codes are delivered along with your software on a
separate sheet of paper or on the inside cover of the DVD case. If you downloaded SPSS
Statistics, your authorization code is available in your Asset Management Portal or from
[Link]
The License Authorization Wizard sends your authorization code over the Internet to SPSS Inc.
and automatically retrieves your license. If your computer is behind a proxy, click Configure
proxy settings and enter the appropriate settings.
If the authorization process fails, you will be prompted to send an e-mail message. Choose
whether you want to send the e-mail message through your desktop e-mail program or through a
Web-based e-mail application.
If you choose the desktop option, a new message with the appropriate information will be
created automatically.
If you choose the Web-based option, you must first create a new message in your Web-based
e-mail program. Then copy the message text from the License Authorization Wizard and
paste it into your e-mail application.
Send the e-mail message and respond to the prompt in the License Authorization Wizard. The
e-mail message will be processed almost instantaneously. You can click Enter License Code(s)
to enter any license code(s) that you receive. If you already closed the License Authorization
Wizard, restart it and select License my product now. On the Enter Codes panel, add the license
code that you received and click Next to complete the process.
Enabling for Temporary Usage
You can enable for temporary usage instead of installing the regular license.
E Launch the License Authorization Wizard.
E When prompted, choose Enable for temporary usage.
E On the next screen, click the browse button to locate the temporary usage file in the product
installation directory (typically [Link]).
Viewing Your License
You can view the license by relaunching the License Authorization Wizard. The first panel
displays the licensing information. Click Cancel when done, and click Yes when prompted about
cancelling.
5
IBM SPSS Statistics for Windows Installation Instructions (Single User)
Note: You can also view the license by running the SHOW LICENSE IBM SPSS Statistics
syntax command.
IBM SPSS Statistics Integration Plug-ins
IBM SPSS Statistics Integration Plug-ins enable you to extend the command syntax language
with programs written in R, Python, and [Link]. For more information, visit Developer Central
([Link]
Uninstalling IBM SPSS Statistics
To completely uninstall IBM SPSS Statistics:
E Use the Windows Control Panel to remove SPSS Statistics.
E Delete the following folder:
Windows XP. C:\Documents and Settings\<user>\Application
Data\Eclipse\[Link].help_19
Windows Vista and 7. C:\Users\<user>\Application
Data\Eclipse\[Link].help_19
Updating, Modifying, and Renewing IBM SPSS Statistics
If you purchase additional add-on modules or renew your license, you will receive a new
authorization code (or codes). For instructions on using the authorization code(s), see Licensing
Your Product on p. 3 .
