DESMI INC.
R O TA N I N T E R N A L G E A R P U M P S
Serving industry since 1921
Available in cast iron, carbon steel,
and stainless steel construction
GP/HD/PD/CD/MD SERIES
DESMI ROTAN, one of the worlds
leading manufacturers of internal gear pumps
DESMI A/S, formerly known as A/S De Smithske, was founded
in 1834. Today DESMI A/S develops, manufactures and markets pumps and pumping systems worldwide.
The ROTAN pumps are marketed by the DESMI ROTAN division and are distributed by subsidiaries, sales agencies and
distributors in more than 40 countries.
The internal gear pump principle was developed in 1915 by a
Danish American. In 1921, he licensed a Danish Company to
manufacture the pumps, which have been continuously marketed worldwide under the ROTAN name. The unique, modular
concept of ROTAN pumps is generally recognized as the most
advanced internal gear pump design available today.
Extensive inventory and assembly capability in North America
Main ofce and factory in Aalborg, Denmark
DESMI INC. facility in Norfolk, Virginia
The ROTAN internal gear pump has a standard in-line, opposing connection design. Oversized ports provide superior selfpriming capability with gentle liquid handling as the direction
of the liquid flow is changed only slightly. In addition to reduced
NPSH requirements, this means high viscosity and shear sensitive materials may be readily pumped. Lubricating and non-lubricating liquids, with appropriate provisions, can be pumped.
Liquid inlet
Passage of
liquid
Discharge
Method of operation
Every pump is hydrostatically
and performance tested
ISO 9001:2000 certicate
Manufacturing with state-of-the-art CNC equipment
ROTAN pumps offer the following additional advantages and
benefits:
Pumping capability in either direction (all models) allowing
installation flexibility
Modular, back pull-out (except GP) design makes inspection and maintenance easy.
Construction is simple and rugged with only two rotating
parts and a shaft seal, enhancing service life
External axial adjustment of rotor/shaft for wear and repositioning after maintenance saves time and expense
Large choice of configurations provide flexibility to handle a
wide range of applications
Substantial inventories are maintained, including stainless
steel and mag drive pumps, to meet customer schedules
Competitively priced, reducing customers initial and operation costs
Computerized selection program available for customers
needing immediate sizing and related application information
Standard, integral relief valve mounted on casing saves
space and simplifies piping
GP/CC
SERIES
Direct coupled pumps in cast iron,
for clean and mildly abrasive liquids
GP monoblock pumps are typically used for handling various
clean and mildly abrasive liquids. The simple and compact construction makes it a low cost pump, often used in modified versions by OEM customers.
CC models (shown below) are close-coupled, providing the ultimate compact construction. GP/CC pumps are designed for
use with NEMA or IEC-flanged motors.
Capacity range:
Speed:
Differential pressure:
Suction lift:
Viscosity range:
Temperature:
Up to 225 gpm
Up to 1750 rpm
Up to 250 psi
Up to 15 Hg vacuum while
priming
Up to 24 Hg vacuum while
pumping
Up to 7,500 cST
Up to 300 F
HD
SERIES
Heavy Duty pumps in cast iron, for a wide
range of viscous, non-corrosive liquids
HD pumps are specifically designed for difficult applications and
those involving high viscosity liquids.
Typical applications include pumping oils, asphalts, chocolates,
paints, lacquers, molasses, soaps, and other industrial viscous
process fluids.
HD pumps are known for their rugged and simple construction.
Capacity range:
Speed:
Differential pressure:
Suction lift:
Viscosity range:
Temperature:
Up to 750 gpm
Up to 1750 rpm
Up to 250 psi
Up to 15 Hg vacuum while
priming
Up to 24 Hg vacuum while
pumping
Up to 250,000 cST
Up to 500 F
PD
SERIES
Petrochemical Duty Pumps in carbon steel, designed
for Renery and Petrochemical applications
PD pumps are designed for refinery and petrochemical applications, and are of steel external construction.
Typical applications include pumping fuel oils, gasoline, lube
oils, greases, and other hydrocarbon-based fluids. PD pumps
are available to meet most API 676 standards.
Capacity range:
Speed:
Differential pressure:
Suction lift:
Viscosity range:
Temperature:
Up to 750 gpm
Up to 1750 rpm
Up to 250 psi
Up to 15 Hg vacuum while
priming
Up to 24 Hg vacuum while
pumping
Up to 250,000 cST
Up to 500 F
CD
SERIES
Chemical Duty pumps in stainless steel,
designed to handle corrosive liquids
CD pumps are designed for handling corrosive liquids, primarily
in the chemical processing, food, and pharmaceutical industries.
Typical applications include pumping organic acids, fatty acids,
alkalis, caustic soda, polymer solutions, soap, shampoo, animal
fat, vegetable fat, chocolate, and other special fluids.
Capacity range:
Speed:
Differential pressure:
Suction lift:
Viscosity range:
Up to 750 gpm
Up to 1750 rpm
Up to 250 psi
Up to 15 Hg vacuum while
priming
Up to 24 Hg vacuum while
pumping
Up to 250,000 cST
Temperature:
Up to 500 F
MD
SERIES
Mag Drive sealless pumps, for ultimate
protection against leakage
MD pumps are designed for applications demanding zero emissions. Previously, these applications were typically isocyanate,
solvents and other hazardous organic liquids. The use of MD
pumps is rapidly expanding to include many non-hazardous liquids.
This is due to the increasing need to eliminate leakage and subsequent pollution. Another advantage of installing MD pumps
is the extremely low maintenance requirement. They will often
provide a cost-effective solution for installations where a conventional pump would need frequent replacement of the shaft
seal(s).
Capacity range:
Speed:
Differential pressure:
Suction lift:
Viscosity range:
Temperature:
Up to 400 gpm
Up to 1750 rpm
Up to 250 psi
Up to 15 Hg vacuum while
priming
Up to 24 Hg vacuum while
pumping
Up to 10,000 cST
Up to 500 F
Most important MD model features and benets:
Maximum protection against leakage, sealless design provides assurance against environmental contamination
Advanced, patented cooling system based on an integral
pump eliminates the need for external cooling
Dynamic axial balancing system minimizes axial loads,
reduces energy consumption, and increases equipment
MTBM
Inherent secondary containment system, provided by completely enclosed magnetic coupling housing, controls leakage if primary containment fails
Superior, positive thrust control feature maintains correct
running clearances and eliminates failures common to other designs.
Wide choice of bearing materials available, including cast
iron, bronze, carbon and tungsten carbide
Standard magnet material is neodymium-iron-boron. Optional samarium cobalt permanent magnets allow operating
temperatures up to 500F.
Reversible pumping capability, available by changing the
rotation of the motor, allows installation flexibility
Optional external heating jackets for both front cover and
magnetic coupling housing available when required to assure proper pump operation
Genuine back-pullout design
Pump comes standard as close-coupled, optional with bare
shaft
Both internal and external canister protection
Suction
(Discharge)
Discharge
(Suction)
ROTAN MD SERIES PUMP
The most advanced, magnetically driven, positive displacement
pump available.
9
By indicating the options in the order below,
the complete pump can be identied
1) Pump series
GP
General Purpose, mono block pump in cast iron
CC
General Purpose, close-coupled pump in cast iron
HD
Heavy Duty pump in cast iron
PD
Petrochemical Duty pump in carbon steel
MD
Mag Drive pump, magnetically coupled, in cast iron,
carbon steel or stainless steel
2) Pump sizes
26
DN 25-1
33
DN 32-1
41
DN 40-1
51
DN 50-2
66
DN 65-2
81
DN 80-3
101
DN 100-4
126
DN 125-5
151
DN 150-6
152
DN 150-6
201
DN 200-8
Available with anges* or NPT tapped dependent on the size and
material. GP pumps are available through size 101; PD are not
available in size 152.
* Flange connections according to:
ANSI B 16.1/B 16.5, ISO 2084, DIN 2501, BS 4504 1969
3) Congurations
E
Suction/discharge connections in-line
B
Suction/discharge connections at 90 angle (optional)
6) Lubrication
U
Idler bearing and main bearing lubricated by pump medium
M
Externally lubricated idler bearing and main bearing
7) Material codes for idler bearing
Code Idler Bush
Idler pin: GP-HD-PD
1
Cast iron
Hardened steel
2
Bronze
Hardened steel
3
Carbon
Hardened steel
4
[Link]
[Link] coated steel
5
Carbon
[Link], polished
8
Tungsten carbide Tungsten carbide
8) Material codes for main bearing
Code Bearing bush Shaft: GP-HD-PD
1
Cast iron
Carbon steel
2
Bronze
Carbon steel
3
Carbon
Carbon steel
4
[Link]
[Link] coated steel
8
Tungsten
Coated steel
carbide
B
Ball bearing Steel
Idler pin: CD
329 SS
329 SS
329 SS
329 SS
[Link], polished
Tungsten carbide
Shaft: CD
329 SS
329 SS
329 SS
[Link] coated329 SS
[Link] coated329 SS
Not applicable
9) Shaft seals
B
Teon-impregnated, non-asbestos packing
2
Single mechanical shaft seal
Bellows or O-ring type
22
Double mechanical seal, O-ring type
Only for MD pumps
Add: Choice of additional options, see page 12.
-
/xx
N
C
Hyphen
5) Material codes for wetted parts
Code Type
Casing/Covers Rotor/Idler
1
GP/HD Cast iron
Cast Iron
2
CD
316 SS
329 SS
3
PD
Cast steel
Cast iron
Shaft
Carbon Steel
329 SS
Carbon steel
For MD pumps, all material codes may be used.
10
Magnet length: xx cm
Magnet material: Neodymium-iron-boron
Magnet material: Samarium Cobalt
10) Special congurations
S
All special congurations are marked with: S
Item references and descriptions
BV Shaft
CR Bearing cover
CU Ball bearing
CS Bearing cover
CY Gland
CQ Bearing bracket
BN Shaft seal housing
BP Shaft seal housing
CJ Shaft seal
BC Main bearing bush
BA Rear cover
BU Rotor
AB Idler
AA Head
AD Idler bush
A Pump casing
S Blind cover
AC Idler pin
12
Pump Conguration Options
M -GP/HD
Sealing with stuffing box, with or without lantern ring, for
use of external lubrication. Used for high viscosities and
where some leakage is allowed.
MM (tandem) MMP (back-to-back)
Double mechanical shaft seals, DIN 24960 - KU, in tandem or back-to-back, with main bearing in the barrier
fluid. Used where no leakages are allowed. Up to 90 PSI
differential pressure allowed.
Sealing with mechanical shaft seal, DIN 24960 - KU,
combined with a ball bearing as main bearing.
Used where only minor leakage is allowed.
MMW (tandem) MMPW (back-to-back)
Double mechanical shaft seals, DIN 24960 - KU, in tandem or back-to-back, with main bearing in the liquid.
Used where no leakages are allowed. Up to 250 PSI differential pressure allowed.
M -PD/CD
Sealing with mechanical shaft seal, DIN 24960
- KU, combined with a slide bearing as main bearing.
Used where only minor leakage is allowed.
T
Special clearances increase of tolerances used for liquids
with a viscosity above 7,500 cST. or a temperature above
300F.
Heating jacket on the front cover, often required prior to
start-up when pumping high viscosity liquids and liquids
which tend to solidify.
Heating jacket on the rear cover, often required prior to
start-up when pumping high viscosity liquids and liquids
which tend to solidify. This jacket is also used as a seal
cooling jacket.
Combination of special clearances and heating jackets
together with external lubrication of the main bearing,
used in the chocolate industry.
Special configurations
Lubrication
Safety valve, (single acting lone direction), used to protect the pump and the complete installation against excessive pressures.
Example: Mounting of a cartridge seal, single or double,
is semi standard.
Idler bearing and main bearing externally lubricated. Used
when pumping non-lubricating or high viscosity fluids.
CHD
13
THE DESMI GROUP
2551 Eltham Avenue.
Suite G
Norfolk, Virginia 23513
USA
Phone:
(757) 857 7041
Fax:
(757) 857 6989
Homepage:
[Link]
E-mail:
info@[Link]
