WELCOME TO
MECH 211, Mechanical
Engineering Drawing
Time: M _ W _ _ 10:15 - 11:30
Credits: 3.5 Session: Fall 2013
Introduction
Lecture 1
Whatever area you will
choose
This course is fundamental.
A bit of history
The objective need to communicate
A bit of history
The time line
History in images
Artistic Drawing
Paper could take about
anything
Observe the way
the posts are crossing
Have you ever seen
such a construction?
The fundamental difference ?
Artistic Drawing
Mechanical/Technical drawing
Content of the Course
Introduction to graphic language and design means and
techniques. The third and the first angle projections.
Orthographic projection of points, lines, planes and solids.
Principal and auxiliary views. Views in a given direction.
Sectional views. Intersection of lines, planes and solids.
Development of surfaces. Drafting practices. Dimensioning,
fits and tolerancing. Computer-aided drawing and solid
modelling. Working drawings detail and assembly
drawing. Design practice. Machine elements representation.
Case Study
Content of the Course
A, B, C, D ARE POINTS
Content of the Course
A, B, C, D ARE POINTS
AB, BC, CD, DA, CA ARE LINES
Content of the Course
A, B, C, D ARE POINTS
AB, BC, CD, DA, CA ARE LINES
ABC, CDA ARE PLANES
Content of the Course
A, B, C, D ARE POINTS
AB, BC, CD, DA, CA ARE LINES
ABC, CDA ARE PLANES
ABCD IS A SOLID
Content of the Course
A, B, C, D ARE POINTS
AB, BC, CD, DA, CA ARE LINES
ABC, CDA ARE PLANES
CASE
STUDY
EXPLAIN
WITH TEXT
L
A
IC
N
H
C
TE
COMMUNI
CATION
R
TI
ST
IC
ISOMETRIC
P
PR AR
O AL
JE LE
C L
TI
O
N
PERSPECTIVE
D
M EV
EN EL
T OP
INTERSECTION
ABCD IS A SOLID
GRAPHICS
C
Mission of the Course
Enables the students to learn the techniques and
standard practices of technical graphics
At the end of the lectures, one would be able to:
Read a working or assembly drawing (blueprint)
Represent mechanical components in multiview orthographic
representation
Create conceptual design sketches
Create assembly drawings (limited)
Capability to use AutoCAD for 2-D representations
* The amount of acquired skills will be proportional to the capabilities, will and effort of the individuals
Main Objective of the Course
To acquire essential skills that are part of the mechanical
engineering practice
To be able to communicate with other mechanical
engineering professionals regardless their spoken
language
To be able to communicate with manufacturers of
mechanical systems
Class Logistics
3 teaching hours/week M-W-- 10:15 11:30
12 weeks and one Review week
2 hour of tutorial following the class
4 hours of laboratory every 4 Weeks
3 parallel sections
Class Materials
[Link]
Required textbook
Recommended textbook
Class Materials
Tutorial materials handed in during tutorial periods, also available
on the web. Tutorials will be held in AUTOCAD labs and set of
practicing drawings available on the web site to learn AUTOCAD
Assignments: 8 available on the internet
Solutions to the assignments will be with PODs after assignment
due date
RECOMMENDATION: Attend the classes!
Class Materials
Lect Textbook Description
#
Chapter
1
1, 6
Introduction to graphic language and design, means and techniques, views of a
geometric object, multiview projections, applications and examples - ,
2 2, 3, 4
Instruments, geometric constructions, CAD tools, demonstration examples - ,
3
5, 7, 8, 10 Sketching and shape description, shape generation, sectional and auxiliary views,
examples and applications - ,
4
19
Descriptive Geometry Points and lines, examples -
5
19
Descriptive Geometry Points and lines, examples - ,
6
20
Descriptive Geometry Parallelism & perpendicularity examples - ,
7
21
Descriptive Geometry Solids in space and Intersections examples - ,
8* 21, 22
Descriptive Geometry Intersections, examples, ,
9 22
Descriptive Geometry Developments, examples, - ,
10 11, 12
Dimensioning and tolerancing, examples and applications - ,
11 13
Threads, fasteners, springs, gears, examples - ,
12 14
Design and working drawings examples, Design case study - ,
13 ---Makeup class, Review,
* During the tutorial period of week # 8, the midterm test will be carried
- PowerPoint presentation, - Material available on course website, Lecture to be done on board/screen
Class Instructor and Contacts
Instructor: Dr. S. Narayanswamy
Office: EV Building
Room: 004 124
Phone: 848-2424 (7923)
Office Hours: _ _ _ J _ 10:00 12:00 or by appointment
e-mail: nrskumar@[Link]
Course Web Site: [Link]
What you have to do
Attend the lectures, laboratories and tutorials try to understand the
objectives as well as the procedures
Use time at home to read and study the chapters in the book use
the material posted on the internet
Do your home-work by yourself consult only your colleagues, tutor,
lab instructor or class instructor
Submit on time your assignments
Write the midterm test this is a good measurement means for your
performance in the class
Write the final exam with confidence that you will do very well
Midterm Exams
Scheduled for October 28th, 2013 and it will be
conducted during the tutorial period.
The midterm test is not mandatory but is
recommended
If the midterm result is better than the final, it will
be counted for 10% towards final grade.
Laboratory
There is lab component to this course
You will be learning about few machineries
There are four of them done in H-1067
once 4 weeks (4 hours a week).
Safety is important and the details are
available in the course outline.
Grading Scheme
To pass, it is imperative to work during the term.
The following grading scheme will be used for those who
wrote the midterm and their grade is higher than the
grade in the final:
Assignments: 16%
Midterm Examination: 10%
Laboratory 14%
Final Examination 60%
who do not write the midterm or their
midterm grade in below the final:
Assignments: 16%
Laboratory 14%
Final Examination 70%
Content of the first lecture
Graphics as communication means
A bit of history
Multiview representation and orthographic
projections
Technical procedures
How to generate multi-view orthographic
projection
Representation rules
Mechanical components
Geometry
is a fundamental thing!
In Nature
In Human Need
[Link]
Introduction
to Graphic Language and Design
Why graphics is necessary?
Communicate information that would not be possible to exchange
in writing
Why not use pictures to communicate visual information?
Usually, a drawing represents something that exists just at
conceptual level
Why not use pictorial representation?
The information contained in a drawing must be used to build an
accurate component/system.
What is Drawing?
Drawing is a graphic representation of a real
thing, an idea, or a proposed design
Why graphic representation?
Graphic method of representation is a basic
natural form of communication of ideas that is
universal and timeless.
It is impossible to explain things through text.
Graphic Language
A simple component!
How hard to
define in words?
Try to describe in words the
following representation: A
MECHANISM
Graphic Language
Graphics language is universal
Graphic Language
The information can be conveyed regardless the
spoken language
1.
og
4. *$#! y
7. ~}z^C
10. @ #&
2.
5. Z $
8. ^?%
11.
3.
@/
6. wd] !;8
9. u $*
Graphic Language
When spoken language is known, the information is more
accurate
Essentials of a good drawing
Should represent the concept/idea/geometry
clearly
Should be able to communicate with others with
out doubt
Should respect the manufacturing feasibility
Should favor a lot standardization
Lets see how to make a good mechanical drawing!
Views
An object could be represented in more ways:
Projections/ Drawing Basics
The way one is visualizing an object
(Simple and sufficient)
Two basic projection types use parallel
projection
Perspective
Parallel
Projections and views (brief)
What is perspective representation
Representation of objects based on the rule of distance: 2
identical object are seen different from different distances
shape is deformed too
This type of representation is not used for technical
purposes in Mechanical Engineering
What should be drawn?
What is seen follow certain rules
Views - Multi-view representation
Project the visible and hidden
edges/corners
Views - Multi-view representation
Multi-views
A part is represented in multiple views (a single part is
seen as more than one part)
The representation makes the user to fully understand
the shape of the part, to perceive the relative proportions
of the geometric features and to position the features one
with respect to another
The parallel projection principle and the alignment of the
features is used in the representation
Type of Projections
Projection planes
The component is aligned with
respect to the principal projection
planes
Top (T) or Horizontal (H)
Front (F) or Vertical (V)
Side (S) or Profile (P)
The projection is carried such that
each feature parallel to the
projection planes to be seen as true
length
Object orientation
Projection principles
Projection principles
Projection Types
Third angle projection
First angle projection
Relative position of the views
All views must be aligned with respect to
each other feature to feature
Drafting strategies (3 view)
Technical procedures
When representing the third view, scale, divider of
miter line is used to ensure the alignment of the
three views
Example
Represent the shown component using multiple
view representation
Example
Start with the front view
The edge C cannot be seen but is
represented by a dashed line (hidden
feature)
Example
Align the top view with respect to the
front view
Example
Complete the representation
Later, dimensioning and comments will
be added to the drawing
The principal projection planes
The object should
be aligned with
respect to the
projection planes
The principal projection planes
- unfolded
Notice the relationship
between the features
The depth distance
from the front to the
object is measured in
the Horizontal and
Profile
Multi-view Projection Drawing
How to generate
Assume the given part as
shown besides.
Position the part in a
convenient way, to simplify
the representation as much
as possible
Multi-view Projection Drawing
How to generate
Select the position of the
projection planes
Start with one of the
projections usually the front
view
Each edge is represented
based on the principle of the
parallel projection
Multi-view Projection Drawing
How to generate
Complete the first view.
Use the basic representation
Principles:
visible edge is seen as a full
line
non-visible feature is
represented by a dash-line
axes of symmetric features
are represented by dash-dot
lines
Multi-view Projection Drawing
How to generate
Continue with the second view
Make sure that you have
accurately align the two views.
Use the same rules for
representation.
The alignment lines must be
perpendicular to the edge of
the projection planes
(The lines of sight are always
perpendicular to the fold line).
Multi-view Projection Drawing
How to generate
Continue with the third view
Make sure that you have
accurately align all views.
Use the same rules for
representation.
The alignment lines must be
perpendicular to the edges of
the projection planes
(The lines of sight are always
perpendicular to the
corresponding fold lines).
Multi-view Projection Drawing
How to generate
Complete the representation
Separate the top from the
profile view along the edge
(fold line)
Unfold the three views to lay
them on the same plane
Multi-view Projection Drawing
How to generate
This is the 3-view
orthographic representation
of the selected part
(FLANGE)
* Do not erase any of the
lines when writing a test
Orthographic multi-view
The above part will be projected on all 6
projection planes
Orthographic multi-view
Orthographic multi-view
Orthographic multi-view
Orthographic multi-view
Orthographic multi-view
Solid models
Minimum number of views
Certain shapes could be described in less number of
views
One must use the minimum number of views for
representation
Minimum number of views
Do not produce more views than necessary
Centerline
Axi-symmetric features are indicated with a
dash-point line - CENTERLINE
Hints on understanding shapes
Try to see the way a solid is created out
of primitives
Hints on understanding shapes
Complex shapes could be generated using Boolean
operations
Pay attention to edges
Projections and views (brief)
Where drawing is used?
It is important to know the rationale of
drawing
Drawing is an international communication
language
Fast way to convey certain type of
information
Limited number of concepts are better
represented by drawing, but not all
The design process
Drawings are created to represent parts
that do not exist yet
The designed parts are intended to be
manufactured
The drawings must carry all the necessary
information that enables the fabrication of
the part
The design process
Design involves constrained creation
Constraints:
Technology limits
Human and environment concerns
Durability and reliability
Cost
Market requirements
Etc.
The design process
REPRESENTATION
PERCEPTION
Basic requirements to be able to
KNOWLEDGE
perform a design
INTUITION
All the above interacts in your
judgment even if you are not
CONCEPT
aware of it
PURE CONCEPT
You have to train your judgment
EMPIRICAL CONCEPT
to be able to perform solutionNOTION
solving based thinking
IDEA
The graphic helps you to do so
The design process
A design is created after analysis, full
understanding of requirements and
constraints and synthesis
Two individuals may not come with the
same solution to the same problem
Example: Connect two straight pipes ND 4 to avoid
leaking of the gas and to permit easy maintenance
of the segment
Solutions to the problem
Multiple: flanges, clips, clamps, seals, etc.
1. Problem Defn.
2. Concept and
ideas
The design process
3. Solutions
4. Models/Prototype
5. Production and
working drawings
Concurrent engineering
approach
The design process
The design process
Drawings in product
development
Sketches
Mechanical
Engineer
Assembly
Drawings
Quality
Assurance
Prod.
drawings
Vendors/
Customers
Functional
Drawings
Designer
Production
Shops
Assembly
Drawings
Assembly
Drawings in product
development
A Component !
