Code No: 56017
Set No. 1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., II Mid-Term Examinations, April 2014
FINITE ELEMENT METHODS
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
Choose the correct alternative:
1.
In a three noded triangular element N1, N2, and N3 are the shape functions which can be expressed in
natural coordinates and therefore N1 is equal to
[ d ]
B) +
C)
D)
A)
2.
In three dimensional axisymmetric solids strain vector is defined as which is equal to
[
C) r , x , y yz ,
D) none
A) [ r , z , yrz , ]
B) r , x , xy , z
3.
To analyse problems involving curved boundaries or surfaces, the following type of elements are [
most suitable elements
A) Linear elements
B) Isoparametric elements
C) 1-D elements
D) cubic elements
4.
Stress in triangular element is given by {} = [D] [B] {Q} where {} is equal to
B) x y xy
C) [ x ]
A) x y
5.
6.
7.
b ]
D) y
The values of Wi and i for Gauss quadrature two-point formula are given as
A) W1 = W2 = 1; 1 = - 2 = 1/ 3 B) W1 = 1; 1 = 1 C) W1 = 2; 1 = 0
D) W1 = 0 ; 1 = 0
In the finite element analysis of isoparametric elements the shape functions for general four noded
rectangular element (in terms of , ) N2 is equal to
A) (1+ ) (1- ) /4
B) (1+ ) (1+ ) /4
C) (1- ) (1- ) /4
D) (1- ) /4
The governing equation for structural dynamics is given by [M]{q}+[C]{q}+[K]{q}=P(t)+Pb(t)+PT(t),
the term [C] is known as
[
A) mass matrix
B) stiffness matrix
C) displacement matrix
D) damping matrix
8.
Conductance matrix is the equivalent of stiffness matrix in the following analysis
A) Dynamic
B) thermal
C) fluid flow
D) static structural
9.
The governing equation for convection process is
A) q = h A Ts
B) q = h A [ Th Ts]
C) q = h A Th
10.
D) q = h A [ Ts Th ]
Number of shape functions the quadrilateral plane stress elements will have
A) 8
B) 4
C) 3
D) 2
Cont2
Code No: 56017
:2:
Set No. 1
II
Fill in the blanks
11.
A triangular element in which strain is constant throughout the element is known as______________
12.
The three dimensional tetrahedron element will have nodes equal to________________
13.
The consistent matrix for one dimensional bar element is given by _______________
14.
The mode of heat transfer in which the transfer of heat take place from one part of a
substance to another part of the same substance is known as ____________________
15.
Jacobian [J] for four node Isoparametric element is given by ________
16.
The elements in which less number of nodes is used to define geometry than are used to define
the shape function are known as________________
17.
A fin is an external surface which is added on to a surface to increase the ___________________
18.
Element conductivity matrix for 1-D heat conduction element is given by ________________
19.
Units for convection heat transfer coefficient is______________________
20.
An axisymmetric solid sometimes called as __________________________
-oOo-
Code No: 56017
Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., II Mid-Term Examinations, April 2014
FINITE ELEMENT METHODS
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
Choose the correct alternative:
1.
Stress in triangular element is given by {} = [D] [B] {Q} where {} is equal to
B) x y xy
C) [ x ]
A) x y
2.
3.
4.
D) y
The values of Wi and i for Gauss quadrature two-point formula are given as
A) W1 = W2 = 1; 1 = - 2 = 1/ 3 B) W1 = 1; 1 = 1 C) W1 = 2; 1 = 0
D) W1 = 0 ; 1 = 0
In the finite element analysis of isoparametric elements the shape functions for general four noded
rectangular element (in terms of , ) N2 is equal to
A) (1+ ) (1- ) /4
B) (1+ ) (1+ ) /4
C) (1- ) (1- ) /4
D) (1- ) /4
The governing equation for structural dynamics is given by [M]{q}+[C]{q}+[K]{q}=P(t)+Pb(t)+PT(t),
[
the term [C] is known as
A) mass matrix
B) stiffness matrix
C) displacement matrix
D) damping matrix
5.
Conductance matrix is the equivalent of stiffness matrix in the following analysis
A) Dynamic
B) thermal
C) fluid flow
D) static structural
6.
The governing equation for convection process is
A) q = h A Ts
B) q = h A [ Th Ts]
C) q = h A Th
D) q = h A [ Ts Th ]
7.
Number of shape functions the quadrilateral plane stress elements will have
A) 8
B) 4
C) 3
D) 2
8..
In a three noded triangular element N1, N2, and N3 are the shape functions which can be expressed in
natural coordinates and therefore N1 is equal to
[
A)
B) +
C)
D)
9.
In three dimensional axisymmetric solids strain vector is defined as which is equal to
[
C) r , x , y yz ,
B) r , x , xy , z
A) [ r , z , yrz , ]
D) none
10.
To analyse problems involving curved boundaries or surfaces, the following type of elements are [
most suitable elements
A) Linear elements
B) Isoparametric elements
C) 1-D elements
D) cubic elements
Cont2
Code No: 56017
II
:2:
Set No. 2
Fill in the blanks
11.
The mode of heat transfer in which the transfer of heat take place from one part of a
substance to another part of the same substance is known as ____________________
12.
Jacobian [J] for four node Isoparametric element is given by ________
13.
The elements in which less number of nodes is used to define geometry than are used to define
the shape function are known as________________
14.
A fin is an external surface which is added on to a surface to increase the ___________________
15.
Element conductivity matrix for 1-D heat conduction element is given by ________________
16.
Units for convection heat transfer coefficient is______________________
17.
An axisymmetric solid sometimes called as __________________________
18.
A triangular element in which strain is constant throughout the element is known as______________
19.
The three dimensional tetrahedron element will have nodes equal to________________
20.
The consistent matrix for one dimensional bar element is given by _______________
-oOo-
Code No: 56017
Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., II Mid-Term Examinations, April 2014
FINITE ELEMENT METHODS
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
Choose the correct alternative:
1.
In the finite element analysis of isoparametric elements the shape functions for general four noded
rectangular element (in terms of , ) N2 is equal to
B) (1+ ) (1+ ) /4
C) (1- ) (1- ) /4
D) (1- ) /4
A) (1+ ) (1- ) /4
2.
The governing equation for structural dynamics is given by [M]{q}+[C]{q}+[K]{q}=P(t)+Pb(t)+PT(t),
the term [C] is known as
[
A) mass matrix
B) stiffness matrix
C) displacement matrix
D) damping matrix
3.
Conductance matrix is the equivalent of stiffness matrix in the following analysis
A) Dynamic
B) thermal
C) fluid flow
D) static structural
4.
The governing equation for convection process is
A) q = h A Ts
B) q = h A [ Th Ts]
C) q = h A Th
D) q = h A [ Ts Th ]
5.
Number of shape functions the quadrilateral plane stress elements will have
A) 8
B) 4
C) 3
D) 2
6.
In a three noded triangular element N1, N2, and N3 are the shape functions which can be expressed in
natural coordinates and therefore N1 is equal to
[
B) +
C)
D)
A)
7.
In three dimensional axisymmetric solids strain vector is defined as which is equal to
[
A) [ r , z , yrz , ]
C) r , x , y yz ,
B) r , x , xy , z
D) none
8.
To analyse problems involving curved boundaries or surfaces, the following type of elements are [
most suitable elements
A) Linear elements
B) Isoparametric elements
C) 1-D elements
D) cubic elements
9.
Stress in triangular element is given by {} = [D] [B] {Q} where {} is equal to
A) x y
B) x y xy
C) [ x ]
10.
[
D) y
The values of Wi and i for Gauss quadrature two-point formula are given as
A) W1 = W2 = 1; 1 = - 2 = 1/ 3 B) W1 = 1; 1 = 1 C) W1 = 2; 1 = 0
[
D) W1 = 0 ; 1 = 0
Cont2
Code No: 56017
:2:
Set No. 3
II
Fill in the blanks
11.
The elements in which less number of nodes is used to define geometry than are used to define
the shape function are known as________________
12.
A fin is an external surface which is added on to a surface to increase the ___________________
13.
Element conductivity matrix for 1-D heat conduction element is given by ________________
14.
Units for convection heat transfer coefficient is______________________
15.
An axisymmetric solid sometimes called as __________________________
16.
A triangular element in which strain is constant throughout the element is known as______________
17.
The three dimensional tetrahedron element will have nodes equal to________________
18.
The consistent matrix for one dimensional bar element is given by _______________
19.
The mode of heat transfer in which the transfer of heat take place from one part of a
substance to another part of the same substance is known as ____________________
20.
Jacobian [J] for four node Isoparametric element is given by ________
-oOo-
Code No: 56017
Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., II Mid-Term Examinations, April 2014
FINITE ELEMENT METHODS
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
Choose the correct alternative:
1.
Conductance matrix is the equivalent of stiffness matrix in the following analysis
A) Dynamic
B) thermal
C) fluid flow
D) static structural
2.
The governing equation for convection process is
A) q = h A Ts
B) q = h A [ Th Ts]
C) q = h A Th
3.
4..
5.
D) q = h A [ Ts Th ]
Number of shape functions the quadrilateral plane stress elements will have
[
A) 8
B) 4
C) 3
D) 2
In a three noded triangular element N1, N2, and N3 are the shape functions which can be expressed in
natural coordinates and therefore N1 is equal to
[
B) +
C)
D)
A)
]
]
In three dimensional axisymmetric solids strain vector is defined as which is equal to
[
A) [ r , z , yrz , ]
C) r , x , y yz ,
B) r , x , xy , z
D) none
6.
To analyse problems involving curved boundaries or surfaces, the following type of elements are [
most suitable elements
A) Linear elements
B) Isoparametric elements
C) 1-D elements
D) cubic elements
7.
Stress in triangular element is given by {} = [D] [B] {Q} where {} is equal to
A) x y
B) x y xy
C) [ x ]
8.
9.
[
D) y
The values of Wi and i for Gauss quadrature two-point formula are given as
A) W1 = W2 = 1; 1 = - 2 = 1/ 3 B) W1 = 1; 1 = 1 C) W1 = 2; 1 = 0
D) W1 = 0 ; 1 = 0
In the finite element analysis of isoparametric elements the shape functions for general four noded
rectangular element (in terms of , ) N2 is equal to
A) (1+ ) (1- ) /4
B) (1+ ) (1+ ) /4
C) (1- ) (1- ) /4
D) (1- ) /4
10.
The governing equation for structural dynamics is given by [M]{q}+[C]{q}+[K]{q}=P(t)+Pb(t)+PT(t),
the term [C] is known as
[
]
A) mass matrix
B) stiffness matrix
C) displacement matrix
D) damping matrix
Cont2
Code No: 56017
:2:
Set No. 4
II
Fill in the blanks
11.
Element conductivity matrix for 1-D heat conduction element is given by ________________
12.
Units for convection heat transfer coefficient is______________________
13.
An axisymmetric solid sometimes called as __________________________
14.
A triangular element in which strain is constant throughout the element is known as______________
15.
The three dimensional tetrahedron element will have nodes equal to________________
16.
The consistent matrix for one dimensional bar element is given by _______________
17.
The mode of heat transfer in which the transfer of heat take place from one part of a
substance to another part of the same substance is known as ____________________
18
Jacobian [J] for four node Isoparametric element is given by ________
19.
The elements in which less number of nodes is used to define geometry than are used to define
the shape function are known as________________
20.
A fin is an external surface which is added on to a surface to increase the ___________________
-oOo-
