The IMSBC Code
(Non all-inclusive chart of the Code;only basic step-by-step guide for compliance requirements of a bulk cargo)
IMSBC Code The Basics
The Code does not
cover grain cargoes
regulated by the
International Grain
Code
The Code does not
cover solid cargoes in
bags, or similar
packaged goods
regulated by the IMDG
Code (International
Maritime Dangerous
Goods Code)
Before accepting cargo for shipment, shipper must
provide master with cargo information and signed
cargo declaration form (ref. s 4)
Correct Bulk Cargo shipping
name (BCSN) Important
(Implications)
Cargos physical
and chemical
properties
(s 4.2.2)
If cargos BCSN is not in the Code,
it is considered a cargo not listed in the Code
Section 1.3 of the Code applies Shippers
responsibility to provide cargo information to
competent authority at port of loading (CA-PL) for
assessment of the appropriate carriage
requirements
If assessed as Group C, CA-PL
will authorise carriage and CA
port of discharge (CA-PD)
and vessels Flag State (FS)
will be informed
If assessed as
Group A or B,
tripartite
agreement
required from
CA-PL, CA-PD
and FS.
CA-PL provides master with certificate of cargo
schedule, i.e. cargo characteristics and carriage
requirements. CA-PL will also inform IMO of same.
IMSBC Code Miscelleanous
IMSBC Code - Classification
Entry into
enclosed spaces;
A.1050 (27)
Solid bulk cargoes categorized into three distinct groups in the Code:
Group A:
Cargoes that
may liquefy
Risk:
Liquefaction,
cargo shift,
capsizing
Cargoes
prone to
liquefaction:
Contain a
certain
quantity of
moisture and
small fine
particles
Requirements:
(1) TML
Certificate
(2) Moisture
Content
Certificate
(3) MC < TML
Group B:
Cargoes that possess chemical hazards
Dangerous goods;
(e.g. cargoes that
have been assigned
by a UN number by
the United Nations
Sub-Committee of
Experts on the
Transport of
Dangerous Goods)
Materials
Hazardous Only
in Bulk (MHB);
Cargoes that do
not meet the
criteria for
inclusion in the
IMDG classes for
dangerous
goods.
Risk: Fire or explosion due to chemical
hazards, release of toxic gases and
corrosion, damage to ship structures due to
poor loading procedures.
Requirements:
(1) Doc of Compliance for ship. Special list,
manifest or stowage plan. Instructions for
emergency response.
(2) Segregation requirements important.
Group C:
Nonharzardous
cargoes
(cargoes
that do not
meet Group
A
or B)
Some cargoes
may still
carry some
risks e.g. iron
ore and high
density
cargoes
overstressing
the tanktop.
Pesticides;
Recommendations
MSC .1/circ.1264
& circ. 1396
Loading Plan
agreed between
Master and
Terminal
Representative
(SOLAS Reg. VI/7,
BLU Code)
CO2 fire fighting
exemption (MSC
1/circ.1395/rev.1)
for certain solid
bulk cargoes (ref:
SOLAS regulation
II-2/[Link])
Trim level,
consider ship
ballasting and
loading
sequences.
Cargo Residues,
hold washing
water & HME
substances
(ref: MARPOL
Annex V)
Sand, cement
generation
of dust.
Contact details of
CAs (BC.1/circ.71)
Follow
precautions in
Code.
Disclaimer: The information contained in this chart is based on
information from the IMSBC Code and is provided for general guidance
and information purposes only. Whilst every effort is made to ensure
that the chart is accurate and up to date, BIMCO does not warrant, nor
does it accept any responsibility or liability for the accuracy or
completeness of the chart or for any loss or damages which may arise
from reliance on the information contained in the chart
MSC.1/circ. 1452
(Implementation
of early measures
of 02-13
amendments)
DSC.1/circ.71-iron
ore fines
17 Jan 2014
BIMCO Marine dept ACFN