EMERSON MOOG MODULAR SYSTEM
EMERSON MOOG MODULAR SYSTEM
The Emerson Moog Modular System (EMMS) is composed of a main system unit encased in a stainless
steel shell with a steel angle iron frame. Inside of this shell, there are five wood module mounting
cabinets. Outside of this shell, there is the primary controller (usually referred to as the keyboard) unit.
The EMMS consists of three types of wood cabinets:
MAIN CONSOLE CABINET:
48 1/4 Wide by 15 High by 16 Deep
Sloped front with two rows of modules
Top row consists of standard removable Moog modules, 22 positions
Bottom row consists of Console panels that are not removable
EXPANSION CABINET:
48 1/4 Wide by 9 1/2 High by 8 1/4 Deep
One row of standard removable Moog modules, 22 positions
KEYBOARD CABINET:
43 Wide by 4 High by 9 Deep
5- Octave Pratt-Read organ-style keyboard
Range, Scale, and Portamento controls, with Glide/No Glide switch
POWER SUPPLIES:
For increased reliability, the original Moog 930 power supplies have been replaced with modern linear
power supplies. The rear of the system has a tool-removable cover to protect the user from potentially
hazardous voltages.
SPECIFICATIONS:
Input: 120 VAC
Outputs: +12 VDC @ 6.8 amps, - 6 VDC @ 4 amps, +15 VDC @ 1.5 amps, -15 VDC @ 1.5 amps
Sequencer cabinet power: +12 VDC @ 2 amps, -6 VDC @ 2 amps
Lamp power: 6.3 VAC @ 6 amps
PRESET REMOTE:
A Preset Selector Remote is connected to the main cabinet via a standard DB-25 cable. It allows
selection of presets from a convenient location away from the main system. A special preset scanner allows
the user to set the remote to automatically step through the presets, with a configurable rate control.
CABINETS:
All cabinets are made to the same specifications as the original Moog modular console design:
Quality wood with the same color and finish as the original systems
Metal Nut Bars for module mounting
Original 6-32 Truss-head screws for mounting modules to Nut Bars
Original piano hinges for mounting of the console panels
MODULES:
All modules are made to the exacting specifications of the original Moog modules:
Metal C-Frames and PCB brackets
Original 4-40 Oval-head screws for mounting C-Frames to the front panels
AMP DUO-TYNE edge connectors
Switchcraft and Cinch-Jones jacks
Original manufacturer knobs
Front panels made using the same processes specified by Moog and pressed on the exact type of turret press.
There are three classes of modules used in the EMMS:
1. Standard Moog modules
2. Standard Moog modules that were modified over the years to meet Emersons needs
3. Custom modules that are unique to Keith Emersons system and have never been replicated until now
1
B e low is an ove rview of e ac h m odule or pa nel in the system . To o ri ent
yo u r s e lf start at the b ottom c a binet, left m ost position.
EXPANSION CABINET 3
POSITION
10
11
12
13
14
15
16
17
18
19
20 21
22
10
11
12
13
14
15
16
17
18
19
20 21
22
10
11
12
13
14
15
16
17
18
19
20 21
22
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
19 20
21
22
10
11
12
13
14
15
16
17
18
19 20
21
22
EXPANSION CABINET 2
POSITION
EXPANSION CABINET 1
POSITION
MAIN CONSOLE MODULE ROW
POSITION
19
20
21
22
MAIN CONSOLE PANEL ROW
POSITION
BOTTOM EXPANSION CABINET
POSITION
EMERSON MOOG MODULAR SYSTEM OVERVIEW
TUNER
Bottom Expansion Cabinet, positions 1 and 2
*** Unique to Keith Emersons Original System ***
Custom module containing a tuner powered by the system. The input is internally connected to the
center panel in the main console panel section.
PRESET PROGRAMMER MASTER MODULE
Bottom Expansion Cabinet, position 3
*** Unique to Keith Emersons Original System ***
Collects the preset control voltages from the Programmer Preset modules to the right
Illuminated push button switch that turns off any active preset module, and puts the programmable
modules in the main console into the mode set up on their respective front panel controls (panel mode)
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
PROGRAMMER PRESET MODULE
Bottom Expansion Cabinet, position 5
*** Unique to Keith Emersons Original System ***
Two presets, enabled by illuminated pushbutton switches
Two sets of preset settings controls behind the front panel
Upper preset button enables settings controls on the left side
Lower preset button enables settings controls on the right side
Fine tuning screwdriver adjustment potentiometers on the front panel for VCO 1, 2, and 3 for each
preset, with locknuts to prevent accidental retuning
Octave Up/Normal/Octave Down switches for VCO 1, 2, and 3 for each preset
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
Note: All Programmer Preset modules are separated by blank panels that can be removed by
thumbscrews, allowing access to control settings
PROGRAMMER PRESET MODULE
Bottom Expansion Cabinet, position 7
*** Unique to Keith Emersons Original System ***
Two presets, enabled by illuminated pushbutton switches
Two sets of preset settings controls behind the front panel
Upper preset button enables settings controls on the left side
Lower preset button enables settings controls on the right side
Fine tuning screwdriver adjustment potentiometers on the front panel for VCO 1, 2, and 3 for each
preset, with locknuts to prevent accidental retuning
Octave Up/Normal/Octave Down switches for VCO 1, 2, and 3 for each preset
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
Note: All Programmer Preset modules are separated by blank panels that can be removed by
thumbscrews, allowing access to control settings.
EMERSON MOOG MODULAR SYSTEM OVERVIEW
PROGRAMMER PRESET MODULE
Bottom Expansion Cabinet, position 9
*** Unique to Keith Emersons Original System ***
Two presets, enabled by illuminated pushbutton switches
Two sets of preset settings controls behind the front panel
Upper preset button enables settings controls on the left side
Lower preset button enables settings controls on the right side
Fine tuning screwdriver adjustment potentiometers on the front panel for VCO 1, 2, and 3 for each
preset, with locknuts to prevent accidental retuning
Octave Up/Normal/Octave Down switches for VCO 1, 2, and 3 for each preset
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
Note: All Programmer Preset modules are separated by blank panels that can be removed by
thumbscrews, allowing access to control settings.
PROGRAMMER PRESET MODULE
Bottom Expansion Cabinet, position 11
*** Unique to Keith Emersons Original System ***
Two presets, enabled by illuminated pushbutton switches
Two sets of preset settings controls behind the front panel
Upper preset button enables settings controls on the left side
Lower preset button enables settings controls on the right side
Fine tuning screwdriver adjustment potentiometers on the front panel for VCO 1, 2, and 3 for each
preset, with locknuts to prevent accidental retuning
Octave Up/Normal/Octave Down switches for VCO 1, 2, and 3 for each preset
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
Note: All Programmer Preset modules are separated by blank panels that can be removed by
thumbscrews, allowing access to control settings.
PROGRAMMER PRESET MODULE
Bottom Expansion Cabinet, position 13
*** Unique to Keith Emersons Original System ***
Two presets, enabled by illuminated pushbutton switches
Two sets of preset settings controls behind the front panel
Upper preset button enables settings controls on the left side
Lower preset button enables settings controls on the right side
Fine tuning screwdriver adjustment potentiometers on the front panel for VCO 1, 2, and 3 for each
preset, with locknuts to prevent accidental retuning
Octave Up/Normal/Octave Down switches for VCO 1, 2, and 3 for each preset
Circuitry implemented on custom circuit boards, derived from the handmade point-to-point
vectorboard circuits in Emersons original system.
The circuit schematics are identical.
Note: All Programmer Preset modules are separated by blank panels that can be removed by
thumbscrews, allowing access to control settings.
EMERSON MOOG MODULAR SYSTEM OVERVIEW
902 VCA FRONT PANEL
Bottom Expansion Cabinet, position 15
Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space panel
911 ENVELOPE GENERATOR FRONT PANEL
Bottom Expansion Cabinet, position 16
Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
904B VOLTAGE CONTROLLED HIGH PASS FILTER FRONT PANEL
Bottom Expansion Cabinet, positions 17 and 18
Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
914 FIXED FILTER BANK FRONT PANEL
Bottom Expansion Cabinet, positions 19, 20, 21, and 22
Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
Mounted with thumbscrews for easy removal
Removing panel exposes system power supply voltage test points
EMERSON MOOG MODULAR SYSTEM OVERVIEW
CP3A MIXER
Main Console panel row, positions 1, 2, 3, and 4
*** Unique to Keith Emersons Original System ***
Standard Moog CP3A module
Illuminated slide switches to enable console control voltages to the two 921A Oscillator Driver
modules directly above. These switches are the same as used in the original Moog CP3A.
Trunk Line jacks which provide inputs to the master output XLR driver circuit
Voltage control of mixer channel volumes from the Preset Programmer using a custom Vactrol circuit board
PCBs created from original factory trace layout films
Special components used include:
NOS Illuminated slide switches
NOS 1458 dual op amps, identical to the original design
1% metal film resistors for all CV summing functions
CP3A MIXER
Main Console panel row, positions 5, 6, 7, and 8
*** Unique to Keith Emersons Original System ***
Standard Moog CP3A module
Illuminated slide switches to enable console control voltages to the single 921A Oscillator Driver
module directly above. These switches are the same parts as used in the original Moog CP3A.
Trunk Line jacks which provide inputs to the master output XLR driver circuit
Voltage control of mixer channel volumes from the Preset Programmer using a custom Vactrol circuit board
PCBs created from original factory trace layout films
Special components used include:
NOS Illuminated slide switches
NOS 1458 dual op amps, identical to the original design
1% metal film resistors for all CV summing functions
CUSTOM INTERFACE PANEL
Main Console panel row, positions 9 and 10
*** Unique to Keith Emersons Original System ***
Audio Output switch to turn XLR jacks on the rear of the system on and off
Frequency Counter Select rotary switch to determine what signal is routed to the tuner in the
bottom expansion cabinet External, VCO1, VCO2, or VCO3
Pedalboard Outputs (2) 1/4 and (2) Cinch-Jones 2-pin male, output to ground when Drone
switch is in the ON position
Dymo labels on a hand-drilled and hand-stuffed blank panel
CP3A MIXER
Main Console panel row, positions 11, 12, 13, and 14
Standard Moog CP3A module
Illuminated slide switches to enable console control voltages to the 904A Lowpass Filter module
directly above. These switches are the same parts as used in the original Moog CP3A.
Trunk Line jacks which provide inputs to the master output XLR driver circuit
PCBs created from original factory trace layout films
Special components used include:
NOS Illuminated slide switches
NOS 1458 dual op amps, same as the original design
1% metal film resistors for all CV summing functions
5
EMERSON MOOG MODULAR SYSTEM OVERVIEW
CONSOLE VOLTAGES AND TRIGGERS PANEL
Main Console panel row, positions 15, 16, 17, and 18
*** Unique to Keith Emersons Original System ***
Illuminated slide switches to enable console control voltages to the 904A Lowpass Filter module
directly above. These switches are the same parts as used in the original Moog CP3A.
Reversible Attenuator using custom circuit board that allows filter modulation depth to be controlled
both by the front panel control and the preset programmer
Illuminated slide switches to enable console controller triggers to the leftmost (2) 911 Envelope
Generator modules in the main console module row above, as well as coupling of the 911 outputs to the
left and right 902 VCA modules in the main console row above. These switches are the same parts as
used in the original Moog CP3A.
1/4 and Cinch-Jones 2-pin male connectors for controllers 1, 2, and 3
Special components used include:
NOS Illuminated slide switches
Old-school CA3080 and 1458 chips used for VC functions
1% metal film resistors for all CV summing functions
CUSTOM INTERFACE PANEL
Main Console panel row, positions 19 and 20
*** Unique to Keith Emersons Original System ***
Two sets of four-jack multiples
Pushbutton switches to provide ground signal on associated output jacks when depressed
Dymo labels on a hand-drilled and hand-stuffed blank panel
CP8 CONSOLE POWER AND FUSES
Main Console panel row, positions 21 and 22
Main power switch
Pilot lamp
Fuses for power supplies and lamp power
921 OSCILLATOR DRIVER
Main Console module row, position 1
*** Unique to Keith Emersons Original System ***
Standard Moog 921A module
PCB created from original factory trace layout films
Modification to add input and Volts/Octave adjustment from Preset Programmer section
Special components used include:
LM308 main CV summing amp as per original design, sourced NOS
1% metal film resistors for all CV summing functions
EMERSON MOOG MODULAR SYSTEM OVERVIEW
921B VOLTAGE CONTROLLED OSCILLATOR
Main Console module row, position 2
Standard Moog 921B module
PCB created from original factory trace layout films
Special components used include:
2N3954 Dual FETs, sourced NOS
CA3080 CAN-8 chips, sourced NOS
u796 Multiplier CAN-10 chips, for Sync circuit, sourced NOS
LM/CA3046 DIP-14 chips, sourced NOS
1% metal film resistors per original design
921 OSCILLATOR DRIVER
Main Console module row, position 3
*** Unique to Keith Emersons Original System ***
Standard Moog 921A module
PCB created from original factory trace layout films
Modification to add input and Volts/Octave adjustment from Preset Programmer section
Special components used include:
LM308 main CV summing amp as per original design, sourced NOS
1% metal film resistors for all CV summing functions
921B VOLTAGE CONTROLLED OSCILLATOR
Main Console module row, position 4
Standard Moog 921B module
PCB created from original factory trace layout films
Special components used include:
2N3954 Dual FETs, sourced NOS
CA3080 CAN-8 chips, sourced NOS
u796 Multiplier CAN-10 chips, for Sync circuit, sourced NOS
LM/CA3046 DIP-14 chips, sourced NOS
1% metal film resistors per original design
921 OSCILLATOR DRIVER
Main Console module row, position 5
*** Unique to Keith Emersons Original System ***
Standard Moog 921A module
PCB created from original factory trace layout films
Modification to add input and Volts/Octave adjustment from Preset Programmer section
Special components used include:
LM308 main CV summing amp as per original design, sourced NOS
1% metal film resistors for all CV summing functions
EMERSON MOOG MODULAR SYSTEM OVERVIEW
921B VOLTAGE CONTROLLED OSCILLATOR
Main Console module row, position 6
Standard Moog 921B module
PCB created from original factory trace layout films
Special components used include:
2N3954 Dual FETs, sourced NOS
CA3080 CAN-8 chips, sourced NOS
u796 Multiplier CAN-10 chips, for Sync circuit, sourced NOS
LM/CA3046 DIP-14 chips, sourced NOS
1% metal film resistors per original design
921 VOLTAGE CONTROLLED OSCILLATOR
Main Console module row, positions 7 and 8
Standard Moog 921
PCBs created from original factory trace layout films
Special components used include:
2N3954 Dual FETs, sourced NOS
CA3080 CAN-8 chips, sourced NOS
u796 Multiplier CAN-10 chips, for Sync circuit, sourced NOS
LM/CA3046 DIP-14 chips, sourced NOS
1% metal film resistors per original design
J113 FET, sourced NOS
903A RANDOM SIGNAL GENERATOR
Main Console module row, position 9
*** Unique to Keith Emersons Original System ***
Standard Moog 903A module
PCB created from original factory trace layout films
Modification to add 1/4 jacks that allow patch cord connections controlled by the four switches
added to the adjacent 905 module
Special components used include:
Noise diode implemented with 2N3392 transistor, per original Moog manufacturing update
905 REVERBERATION
Main Console module row, positions 10 and 11
*** Unique to Keith Emersons Original System ***
Standard Moog 905 module
PCB created from original factory trace layout films
Internal standard 6 reverberation tank replaced with RCA jacks on rear of module to connect to
external reverberation tank
Additional audio input jack added
Wet/Dry mix front panel control modified to provide wet mix only (dry signal is always passed
through unaffected)
Four toggle switches added to front panel to enable connection between jack pairs added to
adjacent 903A module
EMERSON MOOG MODULAR SYSTEM OVERVIEW
904A VOLTAGE CONTROLLED LOW PASS FILTER
Main Console module row, positions 12 and 13
Standard Moog 904A module
PCBs created from original factory trace layout films
Special components used include:
Original NOS Mallory 3243J Rotary Switch for range selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
1631 RING MODULATOR
Main Console module row, position 14
Standard Moog CE (Custom Engineering) 1631 front panel
Circuit board based on original Moog CE circuit
904A VOLTAGE CONTROLLED LOW PASS FILTER
Main Console module row, positions 15 and 16
*** Unique to Keith Emersons Original System ***
Standard Moog 904A module
PCBs created from original factory trace layout films
Additional audio input and output jack added
Modified to add voltage controlled resonance for control by Preset Programmer
Special components used include:
Original NOS Mallory 3243J Rotary Switch for range selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
Vactrol on resonance control to provide Preset Programmer control
902 VOLTAGE CONTROLLED AMPLIFIER
Main Console module row, position 17
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
902 VOLTAGE CONTROLLED AMPLIFIER
Main Console module row, position 18
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
EMERSON MOOG MODULAR SYSTEM OVERVIEW
911 ENVELOPE GENERATOR
Main Console module row, position 19
*** Unique to Keith Emersons Original System ***
Standard Moog 911 module
PCB created from original factory trace layout films
Modified to add voltage control of T1, T2, T3, and Sustain for control by Preset Programmer
911 ENVELOPE GENERATOR
Main Console module row, position 20
*** Unique to Keith Emersons Original System ***
Standard Moog 911 module
PCB created from original factory trace layout films
Modified to add voltage control of T1, T2, T3, and Sustain for control by Preset Programmer
911 ENVELOPE GENERATOR
Main Console module row, position 21
*** Unique to Keith Emersons Original System ***
Standard Moog 911 module
PCB created from original factory trace layout films
Modified to add voltage control of T1, T2, T3, and Sustain for control by Preset Programmer
911 ENVELOPE GENERATOR
Main Console module row, position 22
Standard Moog 911 module
PCB created from original factory trace layout films
995A REVERSIBLE ATTENUATOR
Expansion Cabinet 1, position 1
Standard Moog 995A module
PCB created from original factory trace layout films
921 VOLTAGE CONTROLLED OSCILLATOR
Expansion Cabinet 1, positions 2 and 3
Standard Moog 921
PCBs created from original factory trace layout films
Special components used include:
2N3954 Dual FETs, sourced NOS
CA3080 CAN-8 chips, sourced NOS
u796 Multiplier CAN-10 chips, for Sync circuit, sourced NOS
LM/CA3046 DIP-14 chips, sourced NOS
1% metal film resistors per original design
J113 FET, sourced NOS
10
EMERSON MOOG MODULAR SYSTEM OVERVIEW
904A VOLTAGE CONTROLLED LOW PASS FILTER
Expansion Cabinet 1, positions 4 and 5
Standard Moog 904A module
PCBs created from original factory trace layout films
Controlled by adjacent 992 Control Voltages module
Special components used include:
Original NOS Mallory 3243J Rotary Switch for range selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
992 CONTROL VOLTAGES
Expansion Cabinet 1, position 6
Standard Moog 992 module
PCB created from original factory trace layout films
Controls adjacent 904A module
911 ENVELOPE GENERATOR
Expansion Cabinet 1, position 7
Standard Moog 911 module
PCB created from original factory trace layout films
902 VOLTAGE CONTROLLED AMPLIFIER
Expansion Cabinet 1, position 8
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
911 ENVELOPE GENERATOR
Expansion Cabinet 1, position 9
Standard Moog 911 module
PCB created from original factory trace layout films
902 VCA FRONT PANEL
Expansion Cabinet 1, position 10
*** Unique to Keith Emersons Original System ***
Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
Front panel switch connected to panel jacks to allow A/B switch for patch cords
911A DUAL TRIGGER DELAY
Expansion Cabinet 1, position 11
Standard Moog 911A module
PCB created from original factory trace layout films
11
EMERSON MOOG MODULAR SYSTEM OVERVIEW
911 ENVELOPE GENERATOR
Expansion Cabinet 1, position 12
Standard Moog 911 module
PCB created from original factory trace layout films
911 ENVELOPE GENERATOR
Expansion Cabinet 1, position 13
Standard Moog 911 module
PCB created from original factory trace layout films
902 VOLTAGE CONTROLLED AMPLIFIER
Expansion Cabinet 1, position 14
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
902 VOLTAGE CONTROLLED AMPLIFIER
Expansion Cabinet 1, position 15
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
902 VOLTAGE CONTROLLED AMPLIFIER
Expansion Cabinet 1, position 16
Standard Moog 902 module
PCB created from original factory trace layout films
Special components used include:
Original NOS Rocker Switch for Linear/Exponential response selection
Obsolete Clarostat U80 series trim pots replaced with identical, obtainable trim pot, or fixed resistors
with hand-trimmed values.
901A OSCILLATOR CONTROLLER
Expansion Cabinet 1, position 17
Standard Moog 901A module
PCB created from original factory trace layout films
Special components used inlude:
Original CA3019 CAN-10 Precision Diode Array chips, sourced NOS
12
EMERSON MOOG MODULAR SYSTEM OVERVIEW
901B OSCILLATOR
Expansion Cabinet 1, position 18
Standard Moog 901B module
PCB created from original factory trace layout films
Special components used include:
Film capacitors for frequency range selection feature hand-selected parts to bring octaves into
precise match, per the original manufacturing process
Original 1N34 Germanium Diodes for the sine wave shaper, sourced NOS
901B OSCILLATOR
Expansion Cabinet 1, position 19
Standard Moog 901B module
PCB created from original factory trace layout films
Special components used include:
Film capacitors for frequency range selection feature hand-selected parts to bring octaves into
precise match, per the original manufacturing process
Original 1N34 Germanium Diodes for the sine wave shaper, sourced NOS
903 WHITE SOUND SOURCE
Expansion Cabinet 1, position 20
*** Unique to Keith Emersons Original System ***
Standard Moog 901B module
PCB created from original factory trace layout films
Dual 4-position multiple jack clusters added
Special components used include:
Noise diode implemented with 2N3392 transistor, per original Moog manufacturing update
EMERSON SAMPLE AND HOLD MODULE
Expansion Cabinet 1, positions 21 and 22
*** Unique to Keith Emersons Original System ***
Custom module designed by Moog music for Emerson
Circuitry implemented on custom circuit board, derived from the handmade point-to-point
vectorboard circuit in Emersons original system. The circuit schematics are identical.
Uses adjacent 901A, 901B, and 903 modules for sample rate and sampling signal sources
960 SEQUENTIAL CONTROLLER
Expansion cabinet 2, positions 1 through 8
Standard Moog 960 module
PCBs created from original factory trace layout films
Special components used include:
Original Motorola Resistor-Transistor Logic (RTL) MC700 series chips, sourced NOS
Original T2 series Lamps
Original Switchcraft pushbutton switches
Original CA3019 CAN-10 Precision Diode Array chips, sourced NOS
13
EMERSON MOOG MODULAR SYSTEM OVERVIEW
962 SEQUENTIAL SWITCH
Expansion cabinet 2, position 9
Standard Moog 962 module
PCB created from original factory trace layout films
Special components used include:
Original Motorola Resistor-Transistor Logic (RTL) MC700 series chips, sourced NOS
Original T2 series Lamps
Original Switchcraft pushbutton switches
994 MULTIPLES
Expansion cabinet 2, position 10
Standard Moog 994 module
961 INTERFACE
Expansion cabinet 2, positions 11, 12, and 13
Standard Moog 961 module
Special components used include:
Original Motorola Resistor-Transistor Logic (RTL) MC700 series chips, sourced NOS
960 SEQUENTIAL CONTROLLER
Expansion cabinet 2, positions 14 through 21
Standard Moog 960 module
PCBs created from original factory trace layout films
Special components used include:
Original Motorola Resistor-Transistor Logic (RTL) MC700 series chips, sourced NOS
Original T2 series Lamps
Original Switchcraft pushbutton switches
Original CA3019 CAN-10 Precision Diode Array chips, sourced NOS
962 SEQUENTIAL SWITCH
Expansion cabinet 2, position 22
Standard Moog 962 module
PCB created from original factory trace layout films
Special components used include:
Original Motorola Resistor-Transistor Logic (RTL) MC700 series chips, sourced NOS
Original T2 series Lamps
Original Switchcraft pushbutton switches
14
EMERSON MOOG MODULAR SYSTEM OVERVIEW
CUSTOM BRAIN SALAD SURGERY ALBUM COVER ARTWORK PANEL
Expansion cabinet 3, positions 1 and 2
*** Unique to Keith Emersons Original System ***
Created specifically for Emersons system
CUSTOM MILITARY AIRCRAFT WEAPONS SYSTEM SWITCH CLUSTER
Expansion cabinet 3, positions 3 and 4
*** Unique to Keith Emersons Original System ***
Created specifically for Emersons system
Switches turn on LED display panels, and rear panel AC outlet
CUSTOM LED DISPLAY PANEL
Expansion cabinet 3, position 5
*** Unique to Keith Emersons Original System ***
Seven self-blinking LEDs
Controlled by switch on Military Switch panel
CUSTOM LFO BASED ON 902 FRONT PANEL
Expansion cabinet 3, position 6
*** Unique to Keith Emersons Original System ***
Triangle/Square waveforms
LFO rate controlled by Fixed Control Voltage control
CUSTOM LFO BASED ON 902 FRONT PANEL
Expansion cabinet 3, position 7
*** Unique to Keith Emersons Original System ***
Triangle/Square waveforms
LFO rate controlled by Fixed Control Voltage control
CUSTOM LFO BASED ON 902 FRONT PANEL
Expansion cabinet 3, position 8
*** Unique to Keith Emersons Original System ***
Triangle/Square waveforms
LFO rate controlled by Fixed Control Voltage control
994 MULTIPLES
Expansion cabinet 3, position 9
Standard Moog 994 module
CUSTOM DRONE VOICE VCO BASED ON 911 FRONT PANEL
Expansion cabinet 3, position 10
*** Unique to Keith Emersons Original System ***
Controls for Frequency, Interval, PWM Rate, and PWM Depth
Drone Voice enabled by S-Trigger on 911 S-Trig input
15
EMERSON MOOG MODULAR SYSTEM OVERVIEW
CUSTOM DRONE VOICE VCF BASED ON 911A FRONT PANEL
Expansion cabinet 3, position 11
*** Unique to Keith Emersons Original System ***
Controls for Frequency, LP/BP/HP Select, and Resonance
911 ENVELOPE GENERATOR FRONT PANEL
Expansion cabinet 3, position 12
*** Unique to Keith Emersons Original System ***
911 Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
Output jack serves as CV input for Drone VCOs
CUSTOM SEQUENCER SPEED RAMP GENERATOR BASED ON 911 FRONT PANEL
Expansion cabinet 3, position 13
*** Unique to Keith Emersons Original System ***
911 Front panel with standard controls and jacks, no electronics behind, no function
Used as a decorative space filler panel
S-Trigger input resets ramp to zero volts, after which if slowly climbs to +10 volts, typically used as a
960 Sequencer step rate control voltage
Ramp voltage on output jack
CUSTOM LED DISPLAY PANEL
Expansion cabinet 3, position 14
*** Unique to Keith Emersons Original System ***
Seven self-blinking LEDs
Controlled by switch on Military Switch panel
914 FIXED FILTER BANK
Expansion cabinet 3, position 15 through 18
Standard Moog 914 module
PCBs created from original factory trace layout films
Special components used include:
Real inductors used in original Pi-Filter configurations, custom made and wound to precise original
factory values
EMOVISION
Expansion cabinet 3, position 19 through 22
*** Unique to Keith Emersons Original System ***
Custom panel with LCD video display
Displays program material from DVD player or other video source
16
