Type H8C Load Cell
Short description
Nickel plated alloy steel IP67 shear beam load cell test certificate no. TC8012 Revision 1
(100 kg, 250kg are bending beam load cells) C of C no R60/2000-NL1-12.12
Adhesive sealed
Certificate no. 12-028
Suitable platform weighing, bed weighing, etc.
High accuracy
High reliability
Current calibrated (sc-option)
Available models
Capacity Accuracy Full article description
100kg C3/C4/C5 H8C-C3/C4/C5-100kg-4B(-SC-W6)
250kg C3/C4/C5 H8C-C3/C4/C5-250kg-4B(-SC-W6)
500kg C3/C4/C5 H8C-C3/C4/C5-500kg-4B(-SC-W6)
750kg C3/C4/C5 H8C-C3/C4/C5-750kg-4B(-SC-W6)
1t C3/C4/C5 H8C-C3/C4/C5-1.0t-4B(-SC-W6)
1.5t C3/C4/C5 H8C-C3/C4/C5-1.5t-4B(-SC-W6)
2t C3/C4/C5 H8C-C3/C4/C5-2.0t-4B(-SC-W6)
2.5t C3/C4/C5 H8C-C3/C4/C5-2.5t-6B(-SC-W6)
3t C3/C4/C5 H8C-C3/C4/C5-3.0t-6B(-SC-W6)
5t C3/C4/C5 H8C-C3/C4/C5-5.0t-6B(-SC-W6)
10t C3/C4/C5 H8C-C3/C4/C5-10t-6B(-SC-W6)
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2016.11 H8C Rev13 F: +31 76 50 39481
4871 EN Etten-Leur info@[Link]
The Netherlands 1/5 [Link]
Type H8C Load Cell
Detailed specifications H8C
Accuracy class OIML R60 C3 OIML R60 C4 OIML R60 C5
Output sensitivity ( = FS ) mV/V 3.0 ± 0.003
0.1,
0.1, 0.25, 0.5, 0.75, 1, 1.5, 2, 2.5, 3, 0.25, 3, 5,
Maximum capacity ( Emax ) t 0.5,
5, 10 10
0.75,
1, 1.5,
[Link] of load cell intervals nLC 3000 4000 2, 2.55000
Ratio of min. LC verification interval Y = Emax / vmin 10000 15000 20000 18000
Combined Error %FS ≤± 0.023 ≤± 0.0175 ≤± 0.014
Minimum dead load Of Emax 0%
Safe overload of Emax 150 %
Ultimate overload of Emax 300 %
Zero balance of FS < ± 1.0 %
Excitation, recommended voltage V 5 ~ 12
Excitation maximum V 18
Input resistance Ω 350 ± 3.5
Output resistance Ω 350 ± 3.5
Insulation resistance MΩ ≥5000 ( at 50VDC )
Compensated temperature °C -10 ~+40
Operating temperature °C -35 ~ +65
Storage temperature °C -40 ~ +80
Element material Nickel plated alloy steel
Ingress Protection (acc. to EN 60529) IP67
Recommended torque on fixation Nm M12: 75 M18:500 M24:750
bolts
ATEX classification (optional) II1G Ex ia II1C T4 II1D Ex iaD 20 T73°C II3G nL IIC T4
Wiring
Wiring:
Shielded, 4 or 6 conductor cable
Cable diameter: Ø5mm.
Standard cable length for 100kg – 2t: 4m and 6m for the
higher capacities.
Shield not connected to element.
4-wire diagram 6-wire diagram
Input(+) Red Input(+) Red
Sense(+) Blue
Output(-) White Output(-) White
Sense(-) Yellow
Input (-) Black Input(-) Black
Output(+) Green Output(+) Green
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2016.11 H8C Rev13 F: +31 76 50 39481
4871 EN Etten-Leur info@[Link]
The Netherlands 2/5 [Link]
Type H8C Load Cell
Ordering Info:
H8C – C3 – 1.0t – 4 – – BX – SC – XX
Option XX. No mark is standard version, W4 is through loading hole,
W6 is “T” end loading hole.
Option SC (standard current).
Cable option. No mark is 4 conductor cable and with a “6” a 6 conductor cable.
Thread option. No mark is Metric Thread and “Y” is Imperial thread.
Length of the cable in meters.
Nominal capacity (𝐸𝑚𝑎𝑥 ) for Metric in t(on) and Imperial in lbs up to 500lbs and above in K(ilo)lbs.
Maximum load cell divisions.
Load Cell model.
Dimensions in mm
Standard version
Option W4 version (Through loading hole)
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2016.11 H8C Rev13 F: +31 76 50 39481
4871 EN Etten-Leur info@[Link]
The Netherlands 3/5 [Link]
Type H8C Load Cell
Option W6 version (“T” end loading hole)
Ø Ø Ø
Dimension
L L1 L2 L3 L4 B B1 H H1 H2 H3 H4 ØD D d d M
Capacity
1 1 2
M
100kg -
130 15.8 25.4 76.2 54.2 31.8 37 31.8 15.8 14.5 15.8 4.8 13.5 18 4 2 12
250kg
x 1.75
M
0.5t-2t 130 15.8 25.4 76.2 54.2 31.8 34 31.8 15.8 14.5 15.8 4.8 13.5 18 4 2 12
x 1.75
M
2.5t-5t 171.5 19.1 38.1 95.3 77.2 38.1 40 38.1 18.8 17.5 18.8 4.8 19.8 25 4 2 18
x 1.5
M
10t 222.3 25.4 50.8 120.7 101.6 50.8 52.4 50.8 25.4 - - - 26 - - -
24 x 2
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2016.11 H8C Rev13 F: +31 76 50 39481
4871 EN Etten-Leur info@[Link]
The Netherlands 4/5 [Link]
Type H8C Load Cell
Available accessories
HJ-8-201-0.1-10t foot
Ø60-86 and height 92-112 mm
Nickel plated alloy steel
Adjustable height
HJ-8-203-0.1-2t foot
Ø67 and height 46 mm
Nickel plated alloy steel
Easy installation
HJ-8-213-0.5-2t foot
Ø60 and height 62 mm
Nickel plated alloy steel
Adjustable height
HJ-8-236-0.25-5t foot
Ø80 and height 50 mm
Nickel plated alloy steel
Adjustable mount
Easy installation
Elastomer-0.5-10t
Easy installation
Suitable for shock load
HM-8-402-0.5-5t mount
Nickel plated alloy steel
Adjustable mounting height
Easy installation
HY-8-102-0.5-5t
Nickel plated alloy steel
Easy installation
Good self-alignment ability
HD-8-301-0.5-5t spacer plate
Nickel plated alloy Steel
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2016.11 H8C Rev13 F: +31 76 50 39481
4871 EN Etten-Leur info@[Link]
The Netherlands 5/5 [Link]
