Scribd
Upload
383 views2 pages

Effluent Treatment Plant Technical Data Sheet

This technical document provides information for a waste water treatment plant at an oil refinery. It details that the refinery produces diesel, kerosene and gasoline from raw materials like NaOH, ammonia and H2S. The untreated effluent is discharged continuously at 40 degrees Celsius. Key aspects of the existing treatment plant are described, including tank capacities and the use of a diffuser system for aeration in the bioreactor. Water quality parameters for both the source water and raw/treated effluent are listed.

Uploaded by

rashidul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
383 views2 pages

Effluent Treatment Plant Technical Data Sheet

This technical document provides information for a waste water treatment plant at an oil refinery. It details that the refinery produces diesel, kerosene and gasoline from raw materials like NaOH, ammonia and H2S. The untreated effluent is discharged continuously at 40 degrees Celsius. Key aspects of the existing treatment plant are described, including tank capacities and the use of a diffuser system for aeration in the bioreactor. Water quality parameters for both the source water and raw/treated effluent are listed.

Uploaded by

rashidul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

TECHNICAL INFORMATION DATA SHEET FOR

WASTE WATER/EFFLUENT TREATMENT PLANT (ETP)

Name of the Organization:


Project location:

1. Category of Industrial effluent source : Refinery


2. Manufacturing product(s) : Diesel, Kerosene and gasoline.
3. Raw materials/Chemicals used : NaOH ammonia, H2S,
4. Raw water source : Ground Water
5. Raw effluent color (usually) : Water
6. Temp. of the raw effluent discharged : 40 deg C max
7. Average discharge rate of the effluent : (a) Hourly: (b) Daily:

8. Mode of effluent discharge from factory : Continuous / Periodical (batch-wise)


9. If periodical discharge, (a) Interval: (b) Rate: (c) Duration:
10. Daily running hours (a) Factory: 24 hrs (350 days) (b) ETP:
11. Weekly shutdown :
12. Point of treated effluent disposal : River

13. Disposal of the treated effluent : Full discharge

14. If any ETP exists, details of existing one: N/A

14.1. Capacity :

14.2. Equalization tank capacity :

14.3. Primary clarifier tank capacity :

14.4. Bio-reactor tank capacity :

14.5. Secondary clarifier tank capacity :

14.6. Reservoir Capacity :

14.7. Sludge disposal/management system:


14.8. Sludge Drying Bed Capacity :

14.9. Chemicals used in ETP :


14.10. Aeration technique in Bioreactor system: Diffuser/Perforated pipe

14.11. Any CIP unit for diffuser system :

14.12. Cleaning frequency :

14.13. Date of last cleaning of the diffuser : N/A

14.14. Available space for modification :

14.15. Installation of ETP under plan : Outdoor

14.16. If in-built house existing, roof height, (ft ) :

15. Effluent/Source water quality :

Sl Treated effluent Treated Effluent


Parameter Source water Raw effluent
No. required Available
1 Temperature
2 E .Conductivity
3 pH
4 TDS
5 TSS
6 BOD5
7 COD
8 DO
9 Oil & Grease
10 Hardness
11 Bicarbonate
12 Chloride
13 Phosphate
14 Sulfate
15 Free Cl2
16 Iron
17 Arsenic
18 Barium
19 Chromium
20 Zinc
21 Lead
22 Other heavy metals
23

You might also like