Scribd
Upload
939 views1 page

Electrical Inspection Checklist: Aspen Vision Development SDN BHD Form

1. This electrical inspection checklist is for a project located at an unspecified location and refers to inspection of electrical work by Aspen Vision Development Sdn Bhd. 2. The checklist includes 14 items to inspect such as shop drawings, materials used, positions of outlets and lights, circuit runs, fittings, meter and distribution boards, earthing, and electrical tests. 3. Inspectors must mark each item as acceptable or unacceptable, note any non-conformances, and the document must be signed by the consultant's and client's representatives.

Uploaded by

Siti Rohani Isdris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
939 views1 page

Electrical Inspection Checklist: Aspen Vision Development SDN BHD Form

1. This electrical inspection checklist is for a project located at an unspecified location and refers to inspection of electrical work by Aspen Vision Development Sdn Bhd. 2. The checklist includes 14 items to inspect such as shop drawings, materials used, positions of outlets and lights, circuit runs, fittings, meter and distribution boards, earthing, and electrical tests. 3. Inspectors must mark each item as acceptable or unacceptable, note any non-conformances, and the document must be signed by the consultant's and client's representatives.

Uploaded by

Siti Rohani Isdris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

DOC. REF.

: AVD/PD/ELW
ASPEN VISION DEVELOPMENT SDN BHD
REV. NO. : 0
FORM ISSUE DATE : 15TH DEC 2015
PAGE : 1 of 1
ELECTRICAL INSPECTION CHECKLIST

Project :

Project Ref. : Location : :

Contractor : Drawing Ref. : :

Block/Unit No. : Date & Time :

No. Items to be checked Acceptability Remarks


YES NO
1 Shop drawing approved by consultant
2 Material as per approved sample
3 No of socket outlet, lighting point and other features
are accordance to S & P
4 Final position of outlet and lighting as per drawing
5 Circuit running and alignment of conduit as per
approved shop drawing
6 Sufficient gap between conduit and formwork
7 Fittings to be used for jointing and bending of conduit
8 Meter, DB and sub DB are in correct position
9 Earthing cable provided
10 No jointing of wires are allowed
11 Earth electrode / camber provided
12 Insulation and continuity tests
13 Earth resistance test
14 Other test, please specify

STATUS : YES - Acceptable NO – Unacceptable


Non-Conformance : Correction :

Re-inspection : Remarks :

Checked By : [Consultant’s Rep.] Verified By : [Client’s Rep.]

Signature : ………………………. Signature : ……………………….

Name : Name :

Date : Date :

You might also like