PRODUCT DATA SHEET
SikaGrout®-214
HIGH PERFORMANCE, NON SHRINK, EXPANDING CEMENTITIOUS
GROUTING MORTAR
DESCRIPTION CHARACTERISTICS / ADVANTAGES
Sikagrout® -214 is a high performance, shrinkage com- - Sikagrout® -214 is chloride free and contains no met-
pensating, ready to use grouting mortar. Consisting of al particles. Consequently, it does not oxidize when in
: contact with humidity. Instead it protects metal parts
▪ A blend of cement & fillers, from corrosion owing to its high alkaline Ph.
▪ Properly graded quartz aggregates, - It has a unique 2-stage shrinkage compensating sys-
▪ And Special additives. tem, with a very special blend of shrinkage and water
When mixed with water, the product forms a fluid reducing, plasticizing agents, offering the following be-
grey coloured grout (similar to concrete colour). neficial properties:
▪ High mechanical compressive and bending resist-
USES ances.
▪ Adheres to concrete, mortar and steel, ensuring a
▪ Anchorage of bolts or iron bars in concrete. monolithic bond.
▪ Precision grouting for industrial equipments, subject ▪ Can be pumped, injected, vibrated or compacted. It's
to shocks and vibrations. not altered by large humidity or temp. variations.
▪ Grouting of railway rails or travelling crane tracks. ▪ Resistant to water and oil penetration.
▪ Grouting for turbines, alternators, compressors, gen- ▪ High initial strength reduces down time requirement.
erators, machine tools.
▪ Beam keying or bridge springier support construc- APPROVALS / STANDARDS
tion.
▪ Assembly of metal reinforced concrete or ▪ U.S. Corps of Engineers: CRD C-621 expansion per-
prestressed concrete prefabricated elements. cent.
▪ ASTM C-1107 for 2 stage expansion Grout Grades
B+C.
▪ British Standards for compression, bond and flexural.
▪ Tested and approved by the National Organization
for potable water & sanitary drainage for contact
with potable water and sewage.
* Sika Grout 214 has been tested as per SCAQMD Rule
1168' Result VOC Content 0 g/L
PRODUCT INFORMATION
Chemical base Cement, selected fillers and aggregates, special additives
Packaging 25 kg bags
Appearance / Colour Grey powder
Shelf life 12 months from date of production
Storage conditions Store properly in dry conditions in undamaged and unopened original
sealed packaging
Product Data Sheet
SikaGrout®-214
January 2017, Version 02.01
020201010010000018
1/4
Density (at 20º C)
approx. 2.2 kg/I (of the fresh mortar)
TECHNICAL INFORMATION
Compressive Strength Test Sample Consistency
Age in days
Plastic Fluid
1 300 250
3 400 380
7 430 410
28 550-600 550
Tensile Strength in Flexure Test Sample Consistency
Age in days
Plastic Fluid
7 33.5 43
28 110.5 118
Tensile Strength Adding Fillers
- For large scale grouting projects, silica sand and gravel can be added to
Sikagrout® -214, where the added aggregate must be clean and properly
graded.
- Example: 12.5 kg of sand graded 1-10 mm to one 25 kg bag of Sikgrout® -
214 mixed with 3.5 – 4 lts. of water, yield a grout with the following ap-
proximate mechanical strengths:
Test Sample Age in Compressive Strength Flexural Strength
days (kg/cm2) (kg/cm2)
1 250 -
7 360 40
28 580 114
- Do not exceed 25 kg of sand per bag (Sikagrout® -214 : sand = 1:1 by
weight)
- Note: Expansion decreases when the proportion of sand added increase.
Pull-Out Resistance Test Sample Fluid Consistency
Age in days
Tore Steel Smooth Steel
24 55 20
28 110 40
Water Absorption Pre-cautions
▪ Sikagrout® -214 is always added to the pre-measured gauging water.
▪ Volume of water must always be within the limits as stated in our Tech-
nical Data Sheet.
▪ Excess water, will cause cracks, segregation and low grout strengths.
▪ Sikagrout® -214 should be left to stand after final mixing, for 5 minutes,
allowing any entrapped air to dispel.
▪ To take full advantage of Sikagrout® -214 expansion properties.
▪ Sikagrout® -214 should be poured /placed as soon as possible from 5
minutes standing, up to 30 minutes from mixing
APPLICATION INFORMATION
Mixing ratio Depending on the amount of mixing water used a fluid or plastic mortar
will be obtained:
Ambient Temp. Consistency
degree C. Plastic (It/25kg) Fluid (It/25kg)
5 2.25 3
20 2.5 3.25
35 2.7 3.5
The above proportions should be complied with to avoid bleeding.
Product Data Sheet
SikaGrout®-214
January 2017, Version 02.01
020201010010000018
2/4
Setting Time (at 20º C)
Plastic Flowable
Initial Set 1.40 hrs 5.00 hrs
Final Set 3.10 hrs 8.30 hrs
APPLICATION INSTRUCTIONS BASIS OF PRODUCT DATA
Surface Preparation All technical data stated in this Product Data Sheet are
- The substrate must be properly prepared and free of based on laboratory tests. Actual measured data may
dust and grease. Remove any losses particles which vary due to circumstances beyond our control.
could affect the final ultimate bond strength.
- Moisten concrete or mortar substrate for 12 hrs. be- LOCAL RESTRICTIONS
fore applying Sikagrout® -214 (surface saturated dry
condition SSD). This is extremely important during hot Please note that as a result of specific local regula-
weather applications. tions the performance of this product may vary from
country to country. Please consult the local Product
MIXING Data Sheet for the exact description of the application
fields.
Blend in a mechanical mixing device, preferably in a
vertical-axis mixer or in a fully
– opening container, using a slow- rotating electric or
pneumatic stirring drill (approx. 500 rpm).
Prepare the amount of water required to obtain the
right consistency (refer to mixing ratio). Pour approx.
2/3 of the mix water into the mixer and gradually
add Sikagrout® -214, this will help to avoid making
lumps. Then pour in the rest of the water and let mix
for a minimum of 3 minutes from the time the last wa-
ter was added to the mix.
NOTE: Hand mixing does not ensure proper dispersion
and is not recommende Recommended to use either
low speed (max. 500 rpm) electric drill with a basket
type mixing paddle or forced action – or stand type
mixers
APPLICATION
Minimum application temperature: + 5 ºC.
- For anchoring dowels and bolts the minimum annu-
lar space around the shaft is three times, the diameter
of the largest grains in the mortar mix.
- Pour grout immediately after mixing. Ensure that air
displaced by the mortar can easily escape; otherwise
entrapped air will prevent full contact grouting. Wet
porous substrates to saturated surface dry condition.
- When grouting base plates etc., ensure that a con-
tinuous and sufficient head of pressure is maintained
to keep the grout flowing.
- To make optimum use of the products expansion
properties, apply the grout as quickly as possible (with-
in max. 15 minutes).
CURING TREATMENT
- After placement of Sikagrout® -214, exposed surface
area’s to be fully cured for a minimum period of 3 days
from achieving its initial setting: Or directly bleeding
water have evaporated. Sika Antisol® - E curing com-
pound may also be used to ensure ultimate curing.
CLEANING OF TOOLS
Clean all tools and application equipment with water
immediately after use. Hardened/cured material can
only be mechanically removed.
Product Data Sheet
SikaGrout®-214
January 2017, Version 02.01
020201010010000018
3/4
ECOLOGY, HEALTH AND SAFETY
Safety Precautions
▪ Wear gloves and goggles.
▪ In contact with eyes or skin product may cause skin
irritation.
Ecology
▪ Residues of material must be removed according to
local regulations.
▪ Fully cured material can be disposed of as household
waste under agreement with the responsible local
authorities.
Toxicity
▪ Non-Toxic under relevant health and safety codes.
Transport
▪ Non-hazardous
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika’s cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika’s recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request. It may be necessary to adapt
the above disclaimer to specific local laws and regula-
tions. Any changes to this disclaimer may only be im-
plemented with permission of Sika® Corporate Legal in
Baar.
Sika Egypt
1st Industrial Zone (A)
Section #10, Block 13035
El Obour City, Egypt
TEL: +202 44810580
FAX: +202 44810459
[Link]
SikaGrout-214_en_EG_(01-2017)_2_1.pdf
Product Data Sheet
SikaGrout®-214
January 2017, Version 02.01
020201010010000018
4/4
