Scribd
Upload
177 views4 pages

Microprocessors and Microcontrollers Exam

This document contains a question paper for a microprocessors and microcontrollers examination. It has 15 multiple choice and numerical answer questions covering various topics related to 8085 and 8051 microprocessors and their interfacing with external devices like memory chips, switches, displays and DAC. The questions are divided into two parts - Part A contains 10 short answer questions worth 2 marks each and Part B contains 5 long answer questions worth 16 marks each. The topics covered include architecture of 8085 and 8051, addressing modes, interrupts, I/O interfaces, timers, serial communication, assembly language programming and interfacing with LCD, EPROM, switches and DAC.

Uploaded by

Nisha Jagdish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views4 pages

Microprocessors and Microcontrollers Exam

This document contains a question paper for a microprocessors and microcontrollers examination. It has 15 multiple choice and numerical answer questions covering various topics related to 8085 and 8051 microprocessors and their interfacing with external devices like memory chips, switches, displays and DAC. The questions are divided into two parts - Part A contains 10 short answer questions worth 2 marks each and Part B contains 5 long answer questions worth 16 marks each. The topics covered include architecture of 8085 and 8051, addressing modes, interrupts, I/O interfaces, timers, serial communication, assembly language programming and interfacing with LCD, EPROM, switches and DAC.

Uploaded by

Nisha Jagdish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Reg. No.

Question Paper Code : 13881

B.E. / [Link] DEGREE EXAMINATION, APRIL / MAY 2018


Fifth Semester
B.E. – Electrical and Electronics Engineering
15EE503 – MICROPROCESSORS AND MICROCONTROLLERS
(Regulations: Mepco – R2015)
Duration: 3 Hours Maximum Marks:100
Max. : 100 Marks
Answer ALL Questions
Cog. PART A – (10  2 = 20 Marks)
R 1. What is the function of PC and SP registers in 8085?
R 2. Write the different machine cycles present in 8085.
R 3. List the different hardware interrupts present in 8085 along with their
priority.
U 4. How many address lines and data lines are present in a 2k x 8 RAM chip
and an 8k x 8 EPROM chip?
U 5. Write the BSR control words to set PC0 pin and to reset PC7 pin in 8255.
R 6. Write any four main features of 8279 IC.
U 7. What is the operation carried out when the instruction
MOVX A,@DPTR is executed by 8051?
R 8. What is the function of GATE bit and C/T bit present in the TMOD register
of 8051?

R 9. What is the function of RS and R/ w pins in a LCD?


U 10. Calculate the resolution of an 8-bit ADC with an input voltage of 5V.

PART B – (5  16 = 80 Marks)
U 11. a) Explain the functional block diagram of 8085 microprocessor
in detail. (16 Marks)
OR

1
13881
U 11. b) i. Explain the different addressing modes supported by 8085
Instruction set with two examples for each. (8 Marks)
U 11. b) ii. Draw and explain the timing diagram for I/O read machine
cycle in 8085. (8 Marks)

U 12. a) i. Explain the hardware interrupts present in 8085 along with


the procedure for enabling and disabling hardware interrupts. (8 Marks)
A 12. a) ii. Draw the interfacing diagram to Interface 27128 EPROM
(16k x 8) IC with 8085 using NAND gate decoder such that
the starting address assigned to the chip is C000H. (8 Marks)
OR
U 12. b) i. Explain the software interrupts present in 8085 and the
processing of a software interrupt by 8085 in detail. (8 Marks)
A 12. b) ii. Draw the interfacing diagram to connect an 8-bit DIP switch
with 8085 using I/O mapped I/O scheme such that the address
90H is assigned to it. (8 Marks)

U 13. a) Explain the features, block diagram and control words of


8251 (USART) for asynchronous serial communication. (16 Marks)
OR
U 13. b) Explain the functional block diagram of 8255 IC and explain
its operating modes in detail. (16 Marks)

A 14. a) i. Write 8051 assembly language program to generate a square


wave of 2kHz frequency in pin P1.0 using 8051 timer. The
crystal frequency is 12 MHz. (8 Marks)
A 14. a) ii. Write the algorithm and 8051 assembly language program to
multiply two 8 bit numbers stored in the external memory
Location 9000H & 9001H and store the result in Internal
RAM at address 50H & 51H. (8 Marks)
OR

2
13881
A 14. b) Write the algorithm and 8051 assembly language program to
transmit the message “ENTRY” repeatedly through serial port
of 8051 at 9600 baud rate in mode 1 by polling method. The
crystal frequency is 11.0592 MHz. (16 Marks)

A 15. a) Draw the interfacing diagram to connect a 16 x 2 LCD with


8051 and write the program to display “WELCOME” in the
LCD. (16 Marks)
OR
A 15. b) Draw the interfacing diagram to connect an 8-bit DAC with
8085 processor through 8255 IC and write the programs to
generate
A) a ramp wave and
B) a square wave. The peak value of both waveforms must be
5V. (16 Marks)

3
13881
4
13881

You might also like