Firefighting Reels

| Preconnect or Storage | No Draining, Stacking, or Dragging | All Sizes and Capacities |

| Efficient Use of Vehicle Space | Increased Hose Capacity | Faster Clean-up | ARFF |

You Can’t Buy

A Better Reel.

Family owned and operated since 1933

C FIREFIGHTING REELS
G
Contents
H
Reel Type I.D. Hose Sizes Page
How to Specify Hannay Reels 3
Manual or Power Rewind Reels
Series F4000 3/4" or 1" 4
Series F4100 3/4" or 1" 5
Series F 3/4" or 1" 6-7
Series SF 3/4" or 1" 8-9
Twin Fire Reel Conversion Kit 10
Series FF - Booster Hose 1-1/4" or 1-1/2" 10-11

X Y
Collapsible Hose 1-1/2" or 1-3/4"
Series F7100 - Dual Hose 3/4" – 1-1/2" 12-13
Swing-Out Reel - Single Hose 1" – 1-1/2" 14-15
Dual Hose 1" – 1-1/2"
Manual Rewind Reels
A
Series F3100/FF3600 - Booster Hose
Collapsible Hose
3/4" – 1-1/2"
1" – 1-3/4"
16-17 D
Manual or Power Rewind Reels - Large Diameter
Series LD Reels and Spools
Mercedes and Niedner Capacities F 1-1/2" – 6" 18-19
20 E
Hannay Reels Versatility 21 Types of reels:
Hannay Reels Policies – Our Guarantee, Service Policy, 22
Booster Hose Reels – Quick first-attack for small fires
Paint Notice, Return Goods Policy
or while larger volume hoses are being set up.
Hannay Reels Spec Worksheet 23
LD (Large Diameter) Reels – Reels for long lengths
of 1-½" to 6" collapsible hose.
Top performance. Extreme conditions. Dual Agent Reels – For firefighting with foam.
Hannay Reels. NEW Swing-Out Reels – For aircraft rescue firefighting
applications.
Safety and quick response time are critical when it comes to fighting
fires. Our reels make payout and pickup quicker so you can work
more efficiently and effectively when every second counts. That’s
why Hannay Reels is the #1 reel company specified by OEMs and
Mounting Hole Sizes
professionals worldwide, based on product reliability, ease of
use, and long life. When it comes to keeping your crew and your Pressed Frame Reels and 7/16" wide x 7/8" long slot
Channel Framed Reels running left to right
community safe, you can trust Hannay Reels.
Series 4000 Reels 13/32" round holes
Series LD Reels 5/8" round holes
Attention Truck Committees and Specifiers
of Fire Apparatus
Products shown and described in this catalog are suggested models
for broad use applications throughout the firefighting industry.
All models can be assembled to dimensionally fit your unique
applications and space requirements, and all our components
are designed for multiple configurations.
For special orders, contact your Hannay dealer or call our Inside
Sales Group.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

2 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 SPECIFYING LOCATION OF COMPONENTS

How to Specify Hannay Reels

Optional Location of Components

Location of the inlet, outlet riser, and rewind mechanism can be varied to meet your requirements and must be specified
on your order. The drawings below show the component locations. Unless otherwise specified, most reels will be shipped
as Right Top Rewind with the inlet, outlet riser, and rewind mechanism on the operator’s right.

RT – Right Top Rewind LT – Left Top Rewind

Reels have the inlet, outlet riser, Reels have the inlet, outlet riser,
and rewind mechanism on the and rewind mechanism on the
operator’s right. Hose unwinds operator’s left. Hose unwinds
from the top of the reel. from the top of the reel.

Y
Standard – Always look at your reel from this position Standard for 1500, 1800, 2000 & 4000 Series reels.

D
to determine right-hand or left-hand.

RB – Right Bottom Rewind LB – Left Bottom Rewind

Reels have the inlet, outlet riser, Reels have the inlet, outlet riser,
and rewind mechanism on the and rewind mechanism on the
operator’s right. Hose unwinds operator’s left. Hose unwinds
from the bottom of the reel. from the bottom of the reel.

Note: Use component location initials as suffix

after model number (ie; EF32-23-24 RT)

Optional Motor Locations

Electric rewind motors can be installed in any of the positions shown in these drawings. The Bottom Rear position is standard.
The motor is installed inside the frame on Model ESF reels, which are designed for installation in restricted space.

Bottom Rear Bottom Elevated 2 O’clock Elevated 10 O’clock Inboard

(Standard) Front (REF Reels) (REF Reels) (ESF Reels)

Optional Auxiliary Rewind Positions Optional Roller Positions

Horizontal ring and pinion gear crank rewind mechanism is the Optional roller assembly mounting kits, up to
standard configuration. 2 of either, can be mounted per reel. Consult
Optional positions include vertical and 30° above centerline, as factory, and indicate installation location –
shown in these drawings. Both are available at extra cost and front or rear of reel.
must be specified.

High Mount
Horizontal (Standard) Vertical 30° Angle Low Mount

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 3
C MANUAL OR POWER REWIND REELS
G
Series F4000 For Booster
Hose
• Compact Reels

H
To handle single 3/4" or 1" I.D. hose.
• Choose direct crank rewind (removable) or chain and sprocket
drive powered by electric, hydraulic or compressed air motor.
• Power rewind supplied with strap brake.
• Direct crank rewind supplied with cam-lock brake.
• Standard inlet: 90° ball bearing swivel joint, 1” female NPT threads.
• Standard outlet: 1" male NST threads (1.375" x 8 threads per inch).
• Consult factory for other sizes and/or threads.

X Y
• Standard inlet, outlet riser and hub assembly are steel
(also available in stainless steel).
Electric motor
• Rollers and roller mounting brackets are accessory items. Standard
configuration
Specify roller position.

A D
shown
• Pressures to 1000 psi (69 bar).
• Temps from -25°F to +250°F (-32°C to +121°C).
• Consult factory for other pressures and temperatures. Optional External

F E
Mounting Brackets
Part No. 9906.0025.
CAUTION: F4000/F4100 Series reels not recommended for use Add 2-1/2" to the X dimensions
with Niedner hose. See page 20. shown in the chart.
PARTS DRAWING – ISO 68

Approx. Weight
Hose Capacity of Reel Crank Rewind Reel Dimensions***
Model feet m lb. kg in. mm
Number see Note 3
For power rewind I.D. in. 3/4 1
UPS/
see Note 5 mm 19 25 Freight
NET FedEx A B E E F F X
O.D. in. 1-9/32 1-1/2 SHIP WT. CRANK POWER CRANK POWER
SHIP WT.
mm 33 38
50 35 36 80* 71 15 10 16.5 19 27.75 20.5 13.5
F4018-17-18 15 11 16 36 32 381 254 419 483 705 521 343
100 50 46 83* 81 21 16 16.5 19 33.75 26.5 19.5
F4024-17-18 30 15 21 38 37 533 406 419 483 857 673 495
150 75 57 110* 92 27 22 16.5 19 39.75 32.5 25.5
F4030-17-18 46 23 26 50 42 686 559 419 483 1010 826 648
200 100 70 – 125 35 30 16.5 19 47.75 40.5 33.5
F4038-17-18 61 30 32 – 57 889 762 419 483 1213 1028 851

Notes:
1. S
 pecifications subject to change. 5. When ordering power rewind models, prefix
2. Upon request, reels can be supplied with drum model number with:
lengths other than shown and with disc sizes in A = Air Rewind – supplied with control valve E B
other diameters. and 18” air hose.
C
3. Weights shown in chart are for crank rewind E = Electric Rewind (1/3 HP) – 12v and 24v 8
DC rewind reels supplied with switch and 203
models. ADD these amounts for power rewind
G
models. (does not apply to FedEx or UPS): solenoid. 115v AC rewind reels are not 18.12
supplied with switch, but can be ordered 460
Net lbs/kg Ship lbs/kg
separately.
Electric 18/8.2 18/8.2
Hydraulic 15/6.8 15/6.8 HD = Hydraulic Rewind – not supplied with H
Air 15/6.8 15/6.8 control valve. 9.88
251
6. Be sure to check dimensions and weights prior
4. Dimension “F” is the overall length of standard
to ordering.
model reels. On crank rewind models, the
7. Some roller options may prohibit the use of our Y
dimension shown is with the crank in rewind 10 X
position. Reels require 3-1/2" clearance to molded chain guard. 254
A
D
remove crank handle. 14.5 F
368

NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground).
*** X, Y indicate mounting holes.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

4 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

Series F4100

To handle single 3/4" or 1" I.D. hose.

• Lightweight, compact reels designed for long lengths
of hose in manual and power rewind.
• Gear-driven crank rewind handle is removable.
• Chain and sprocket drive powered by electric, hydraulic
or compressed air motor.
• Gear-driven crank rewind, adjustable pinion brake.
• Standard inlet: 90° ball bearing swivel joint, 1" female
NPT threads.

Y • Standard outlet: 1" male NST threads.

• Optional rollers: Specify roller position when ordering.
• Pressures to 1000 psi (69 bar). Electric rewind

D
with gear-driven
• Temperatures from -25°F to +250°F (-32°C to +121°C). crank rewind
shown
• Consult factory for other pressures and temperatures.

CAUTION: F4000/F4100 Series reels not recommended for use

with Niedner hose. See page 20.

PARTS DRAWING – ISO 216

Approx. Weight
Hose Capacity of Reel Crank Rewind Reel Dimensions***
Model feet m lb. kg in. mm
Number see Note 3
For power rewind I.D. in. 3/4 1
see Note 5 mm 19 25
O.D. in. 1-9/32 1-1/2
NET SHIP A B E E F X
CRANK POWER
mm 33 38
50 35 62 97 15 10 18 20.5 21.5 7.5
F4118-17-18 15 11 28 44 381 254 457 521 546 190
100 50 72 107 21 16 18 20.5 27.5 13.5
F4124-17-18 30 15 33 49 533 406 457 521 699 343
150 75 83 118 27 22 18 20.5 33.5 19.5
F4130-17-18 46 23 38 54 686 559 457 521 851 495
200 100 96 131 35 30 18 20.5 41.5 27.5
F4138-17-18 61 30 44 59 889 762 457 521 1054 698

Notes:
E B
1. S
 pecifications subject to change. 5. When ordering power rewind models,
2. Upon request, reels can be supplied with prefix model number with:
drum lengths other than shown. A = Air Rewind – supplied with control valve C
and 18” air hose. 8
3. Weights shown in chart are for crank rewind 203
models. ADD these amounts for power E = Electric Rewind (1/3 HP) – 12v and
rewind models: 24v DC rewind reels supplied with G
switch and solenoid. 115v AC rewind 18.12
Net lbs/kg Ship lbs/kg 460
reels are not supplied with switch, but
Electric 18/8.2 18/8.2 H
can be ordered separately. 9.88
Hydraulic 15/6.8 15/6.8
251
Air 15/6.8 15/6.8 HD = Hydraulic Rewind – not supplied with
control valve.
4. Dimension “F” is the overall length of
6. Be sure to check dimensions and weights Y
standard model reels. 12.5 X
prior to ordering.
318 A
D
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint. 15.5 F
394
*** X, Y indicate mounting holes.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 5
C MANUAL OR POWER REWIND REELS
G
Series F/SBF For Booster
Hose

H
To handle 3/4" or 1" I.D. hose.
• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• Super Booster®(SBF) polished aluminum construction reel weighs
up to 30% less than standard booster reel. Prefix complete model
number with "SB" when ordering. See Note 6 on page 7.
• Gear-driven crank rewind is standard. Choose chain and sprocket
drive powered by electric, hydraulic or compressed air motor.
• Pinion brake standard.

X
• Standard inlet: 1" 90° ball bearing swivel joint with
1" female NPT threads. Y
• Standard outlet: 1" male NST threads.

A D
(1.375" x 8 threads per inch.)
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel
(also available in stainless steel).

F
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
Shown with optional red finish and
E
• Pressures to 1000 psi (69 bar). optional roller and spool assembly

• Temperatures from -25°F to +250°F (-32°C to+121°C).

• Consult factory for reels to operate at other pressures Twin Fire Reel
and temperatures. Conversion Kit
is also available.
Refer to page 10.
CAUTION: When using Niedner hose, a special riser
and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.

Threaded
Standard Hub Assembly Outlet

Hub Assembly Options Outlet

Riser
Swivel
The hub assembly is the heart of the hose reel. It Axle
Threaded
Inlet
Joint

includes the outlet riser, the reel axle, and the threaded
inlet to which the swivel joint is attached. The swivel joint
permits the reel to rotate freely while connected to the
fluid source.
Standard Hub Assembly with Threaded
The outlet riser is engineered to conform to the contour Outlet
Optional Flanged Riser
of the drum so the hose lies smoothly against the drum Outlet
Riser
without kinking. Smooth interior surfaces are flow-
Flanged Swivel
contoured for unrestricted flow and minimal pressure loss Axle
Riser Threaded Joint
Inlet
through the reel.
A 2-way flow hub assembly is available on certain models
as an option. On this assembly, the reel axle is threaded
on both ends so the swivel joint can be attached at either
end to match piping. A pipe cap is supplied to seal the Optional 2-Way Hub Assembly Threaded
Outlet
­opposite end. Outlet
Riser

Flanged Swivel
Pipe Threaded Riser
Cap Axle Threaded Joint
Inlet Inlet

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

6 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

For Booster
Hose Series F/SBF

PARTS DRAWING: SERIES F – ISO 84; SERIES SBF SUPER BOOSTER®– ISO 122

Approx. Weight
Hose Capacity of Reel Crank Rewind Reel Dimensions***
Model feet m lb. kg in. mm
Number see Note 4
For power rewind I.D. in. 3/4 1 ALUMINUM
STEEL
see Note 5 mm 19 25 see Note 6
O.D. in. 1-9/32 1-1/2
A B D E F F G H X Y
NET SHIP NET SHIP CRANK POWER
mm 33 38
175 85 102 144 80 122 29.5 24 20.5 21.62 34.25 34.38 21.5 12.12 21.5 16.75
*F32-19-21 53 26 46 65 36 55 749 610 521 549 870 873 546 308 546 425

Y *F24-23-24

*F30-23-24
150
46
225
125
38
200
92
42
105
134
61
147
75
34
82
117
53
124
21
533
27.5
15.5
394
22
20.5
521
20.5
23
584
23
25.75
654
32.25
25.88
657
32.38
23.5
597
23.5
12.12
308
12.12
13
330
19.5
16.75
425
16.75
68 61 48 67 37 56 699 559 521 584 819 822 597 308 495 425

D
300 250 120 162 92 134 35 29.5 20.5 23 39.75 41.75 23.5 12.12 27 16.75
F38-23-24 91 76 54 73 42 61 889 749 521 584 1010 1060 597 308 686 425
275 175 113 155 87 129 25.5 20 25.5 24.75 30.25 32.25 27.88 15.5 17.5 21.75
F28-25-26 84 53 51 70 39 59 648 508 648 629 768 819 708 394 445 552
350 250 126 168 93 135 31.5 26 25.5 24.75 36.25 38.25 27.88 15.5 23.5 21.75
F34-25-26 107 76 57 76 42 61 800 660 648 629 921 972 708 394 597 552
175 125 100 150 80 130 13.5 8 25.5 28.75 18.25 18.38 29.88 15.5 5.5 21.75
*F16.5-30-31 53 38 45 68 36 59 343 203 648 730 464 467 759 394 140 552
250 150 107 157 83 133 17 11.5 25.5 28.75 21.75 21.88 29.88 15.5 9 21.75
*F20-30-31 76 46 49 71 38 60 432 292 648 730 552 556 759 394 229 552
350 250 113 163 87 137 21 15.5 25.5 28.75 25.75 27.75 29.88 15.5 13 21.75
F24-30-31 107 76 51 74 39 62 533 394 648 730 654 705 759 394 330 552
– 300 121 171 90 140 25.5 20 25.5 28.75 30.25 32.25 29.88 15.5 17.5 21.75
F28-30-31 – 91 55 78 41 64 648 508 648 730 768 819 759 394 445 552
– 350 134 184 97 147 31.5 26 25.5 28.75 36.25 38.25 29.88 15.5 23.5 21.75
F34-30-31 – 107 61 83 44 67 800 660 648 730 921 972 759 394 597 552
300 200 107 157 83 133 16.5 11.5 31.5 31.75 21.12 23.25 33.62 17.75 9 27.75
F20-33-34 91 61 49 71 38 60 419 292 800 806 536 591 854 451 229 705

Notes:
1. S
 pecifications subject to change. 5. When ordering power rewind models, prefix model
2. A 2-way flow hub is available at no extra cost and number with:
must be specified. Assembly is threaded on both A = Air Rewind – supplied with control valve
ends so swivel joint can be attached at either end and 18” air hose.
B E
of the reel. A pipe cap seals the opposite end. E = Electric Rewind (1/3 HP)
(See Ordering & Accessory Guide.) EP = Electric Rewind (1/2 HP) – 12v and 24v
6.5
DC rewind reels supplied with switch and 125
3. Upon request, reels can be supplied with drum
solenoid. 115v AC rewind reels are not
lengths other than shown and with disc sizes in
supplied with switch, but can be ordered
other diameters. C
separately. 10.5
4. Weights shown in chart are for crank rewind G
HD = Hydraulic Rewind – not supplied with 267
models. ADD these amounts for power rewind control valve.
models: 6. For polished aluminum reels, prefix complete H
Net lbs/kg Ship lbs/kg model number with “SB” (for example: SBEF
Electric 40/18.1 40/18.1 32-19-21).
Hydraulic 20/9.1 20/9.1 7. When installing FH-3 rollers, add 4-1/2" to the X Y
Air 20/9.1 20/9.1
“D” dimension. D
A
8. Be sure to check dimensions and weights prior F
to ordering.

NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension for 1/2 HP
motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling 175' or more must
use 1/2 HP motor. (Use prefix EP when ordering.)
*** X, Y indicate mounting holes.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 7
C MANUAL OR POWER REWIND REELS
G
Series SF/SBSF For Booster
Hose
• Inboard Mounted Motor

H
To handle 3/4" or 1" I.D. hose.
• Inboard motor location high profile.
• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• Super Booster®(SBSF) polished aluminum construction reel weighs
up to 30% less than standard booster reel. Prefix complete model
number with "SB" when ordering. See Note 6 on page 9.
• Choose chain and sprocket rewind powered by either electric or
compressed air motor.
• Pinion brake standard.
X
• Standard inlet: 1" 90° ball bearing swivel joint with Y
1" female NPT threads.

A
• Standard outlet: 1" male NST threads (1.375" x 8 threads per inch).
• Consult factory for other sizes and/or threads. D
• Standard inlet, outlet riser, and hub assembly are steel

F E
(also available in stainless steel).
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +250°F (-32°C to+121°C).
• Consult factory for other pressures and temperatures.

CAUTION: When using Niedner hose, a special riser

and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.

Standard configuration shown

Threaded
Standard Hub Assembly Outlet

Hub Assembly Options Outlet

Riser
Swivel
Threaded Joint
The hub assembly is the heart of the hose reel. It Axle Inlet

includes the outlet riser, the reel axle, and the threaded
inlet to which the swivel joint is attached. The swivel joint
permits the reel to rotate freely while connected to the
fluid source. Standard Hub Assembly with Threaded
The outlet riser is engineered to conform to the contour Optional Flanged Riser
Outlet
Outlet
of the drum so the hose lies smoothly against the drum Riser
without kinking. Smooth interior surfaces are flow- Flanged Swivel
Riser Threaded
contoured for unrestricted flow and minimal pressure loss Axle Inlet
Joint

through the reel.

A 2-way flow hub assembly is available on certain models
as an option. On this assembly, the reel axle is threaded
on both ends so the swivel joint can be attached at either
Optional 2-Way Hub Assembly Threaded
end to match piping. A pipe cap is supplied to seal the Outlet

­opposite end. Outlet

Riser

Flanged Swivel
Pipe Threaded Riser
Cap Axle Threaded Joint
Inlet Inlet

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

8 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

For Booster
Hose Series SF/SBSF
• Inboard Mounted Motor

PARTS DRAWING – ISO 220

Approx. Weight
Hose Capacity of Reel Crank Rewind Reel Dimensions***
Model feet m lb. kg in. mm
Number see Note 4
For power rewind I.D. in. 3/4 1 ALUMINUM
STEEL
see Note 5 mm 19 25 see Note 6
O.D. in. 1-9/32 1-1/2
A B D E F G H X Y
NET SHIP NET SHIP
mm 33 38
175 85 102 144 80 122 29 24 20.5 21.62 34 25.12 15.75 21.5 16.75
SF32-19-21

Y
53 26 46 65 36 55 737 610 521 549 864 638 400 546 425
150 125 92 134 75 117 20.5 15.5 23.5 23 25.5 29.25 17.88 13 19.75
SF24-23-24 46 38 42 61 34 53 521 394 597 584 648 743 454 330 502
225 200 105 147 82 124 27 22 23.5 23 32 29.25 17.88 19.5 19.75
SF30-23-24 68 61 48 67 37 56 686 559 597 584 813 743 454 495 502

D
275 175 113 155 87 129 25 20 25.5 24.75 30 30.88 18.5 17.5 21.75
* SF28-25-26 84 53 51 70 39 59 635 508 648 629 762 784 470 445 552
350 250 126 168 93 135 31 26 25.5 24.75 36 30.88 18.5 23.5 21.75
* SF34-25-26 107 76 57 76 42 61 787 660 648 629 914 784 470 597 552
175 125 100 150 80 130 13 8 29 28.75 18 35.62 21.25 5.5 25.25
SF16.5-30-31 53 38 45 68 36 59 330 203 737 730 457 905 540 140 641
250 150 107 157 83 133 16.5 11.5 29 28.75 21.5 35.62 21.25 9 25.25
SF20-30-31 76 46 49 71 38 60 419 292 737 730 546 905 540 229 641
350 250 113 163 87 137 20.5 15.5 29 28.75 25.5 35.62 21.25 13 25.25
* SF24-30-31 107 76 51 74 39 62 521 394 737 730 648 905 540 330 641
– 300 121 171 90 140 25 20 29 28.75 30 35.62 21.25 17.5 25.25
* SF28-30-31 – 91 55 78 41 64 635 508 737 730 762 905 540 445 641
– 350 134 184 97 147 31 26 29 28.75 36 35.62 21.25 23.5 25.25
* SF34-30-31 – 107 61 83 44 67 787 660 737 730 914 905 540 597 641
300 200 117 167 90 140 16.5 11.5 31.5 31.75 21.12 38.12 22.25 9 27.88
* SF20-33-34 91 61 53 76 41 64 419 292 800 806 536 968 565 229 708

Notes:
1. S
 pecifications subject to change. 5. When ordering power rewind models,
2. A 2-way flow hub is available at no extra prefix model number with:
cost and must be specified. Assembly is A = Air Rewind – supplied with control valve B E
threaded on both ends so swivel joint can and 18” air hose.
be attached at either end of the reel. A pipe E = Electric Rewind (1/3 HP)
EP = Electric Rewind (1/2 HP) – 12v and 24v 6.5
cap seals the opposite end. (See Ordering & 165
Accessory Guide.) DC rewind reels supplied with switch
and solenoid. 115v AC rewind reels are
3. Upon request, reels can be supplied with C
not supplied with switch, but can be 10.5
drum lengths other than shown and with disc 267
ordered separately. G
sizes in other diameters.
HD = Hydraulic Rewind – not supplied with
4. Weights shown in chart are for crank rewind control valve.
models. ADD these amounts for power 6. For polished aluminum reels, prefix complete H
rewind models (does not apply to FedEx model number with “SB” (for example:
or UPS): SBESF32-19-21).
Net lbs/kg Ship lbs/kg 7. All frames are rollformed channel, except
Electric 40/18.1 40/18.1 Super Booster®, which is square tubing. X Y
Hydraulic 20/9.1 20/9.1
8. Be sure to check dimensions and weights A D
Air 20/9.1 20/9.1
prior to ordering. F

NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* Reels handling 175' or more of 1" must use 1/2 HP motor.
*** X, Y indicate mounting holes.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 9
C MANUAL OR POWER REWIND REELS
G
Series FF/SBFF
• Large Diameter Booster Hose • Preconnected Collapsible Hose

H
To handle 1-1/4" or 1-1/2" I.D. booster hose
or 1-1/2" or 1-3/4" I.D. collapsible hose.
• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• Super Booster®(SBFF) polished aluminum construction reel weighs
up to 30% less than standard booster reel. Prefix complete model
number with "SB" when ordering. See Note 6 on page 11.
• Gear-driven crank rewind is standard. Choose chain and sprocket
drive powered by electric, hydraulic or compressed air motor.
• Pinion brake standard.
X
• Standard inlet: 1-1/2" 90° ball bearing swivel joint with Y
1-1/2" female NPT threads and 2" Victaulic® groove.

A D
• Flanged outlet riser.
• Standard outlet: 1-1/2" male NST threads.
(1.990" x 9 threads per inch.)
• Consult factory for other sizes and/or threads.

F
• Standard inlet, outlet riser, and hub assembly are steel
(also available in stainless steel). E
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
• Pressures to 600 psi (41 bar).
• Temperatures from -25°F to +175°F (-32°C to +79°C). Shown with optional
• Consult factory for other pressures and temperatures. polished aluminum
construction

CAUTION:  When using Niedner hose, a special riser

and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.

Optional

Twin Fire Reel Conversion Kit For Booster

Hose

High mount top

For Series F and FF. wind position

Twin booster hose reels combine

matched F or FF Series reels in a
single unit with a center-mounted
roller and spool assembly. Hose
from both reels can be used on
either side of the truck. Rugged
unit frame construction maintains
alignment and simplifies installation
when two reels are combined.
Two F Series reels, and a Two F Series reels, a Twin Fire Reel
standard Twin Fire Reel Conversion Kit, and two optional
Consult dealer or factory for Conversion Kit. outrigger roller assemblies.
more information. Shown assembled. Shown assembled.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

10 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

Series FF/SBFF
• Large Diameter Booster Hose • Preconnected Collapsible Hose

PARTS DRAWING – ISO 18 PRESSED FRAME, OR ISO 41 ROLLFORM FRAME

Hose Capacity of Reel Approx. Weight

feet m Crank Rewind Reel Dimensions***
lb. kg in. mm
Model Round Hose Collapsible Hose see Note 4
Number I.D. in. 1-1/4 1-1/2 1-1/2 1-3/4 ALUMINUM
STEEL
mm 32 38 38 44 see Note 6
O.D. in. 1-13/16 2-1/16 3/4 x 3 7/8 x 3-1/4
A B D E F G H X Y
NET SHIP NET SHIP
mm 46 52 19 x 76 22 x 83
100 50 150 125 111 153 80 122 25.5 20 20.5 23 32.25 23.5 12.12 17.5 16.75
FF28-23-24

Y
30 15 46 38 50 69 36 55 648 508 521 584 819 579 308 445 425
100 100 200 175 123 165 90 132 25.5 20 25.5 24.75 32.25 27.88 15.5 17.5 21.75
FF28-25-26 30 30 61 53 56 75 41 60 648 508 648 629 819 708 394 445 552
75 50 100 75 110 160 83 133 13 7.5 25.5 28.75 19.75 29.88 15.5 7.75 21.75
FF16-30-31 23 15 30 23 50 73 38 60 330 191 648 730 502 759 394 197 552

D
100 75 150 75 114 164 85 135 15 9.5 25.5 28.75 21.75 29.88 15.5 7 21.75
FF18-30-31 30 23 46 23 52 74 39 61 381 241 648 730 552 759 394 178 552
250 150 300 250 131 181 93 143 25.5 20 25.5 28.75 32.25 29.88 15.5 17.5 21.75
FF28-30-31 76 46 91 76 59 82 42 65 648 508 648 730 819 759 394 445 552
125 100 200 150 120 174 88 142 16.5 11.5 31.5 31.75 23.25 33.62 17.75 9 27.75
FF20-33-34 38 30 61 46 54 79 40 64 419 292 800 806 591 854 451 229 705
150 150 250 200 125 179 91 145 18.5 13.5 31.5 31.75 25.25 33.62 17.75 11 27.75
FF22-33-34 46 46 76 61 57 81 41 66 470 343 800 806 641 854 451 279 705

Notes:
1. S
 pecifications subject to change. 5. When ordering power rewind models,
2. Dimensions up to and including 30-31 disc size prefix model number with:
B E
reflect pressed frames. All others are rollformed A = Air Rewind – supplied with control valve
channel frames, except Super Booster®, which and 18” air hose.
6.5
is square tubing. EP = Electric Rewind (1/2 HP) – 12v and 24v 165
DC rewind reels supplied with switch and
3. Upon request, reels can be supplied with drum
solenoid. 115v AC rewind reels are not
lengths other than shown and with disc sizes in C
supplied with switch, but can be ordered 10.5 G
other diameters. 267
separately.
4. Weights shown in chart are for crank rewind
HD = Hydraulic Rewind – not supplied with H
models. ADD these amounts for power
control valve.
rewind models.
6. For polished aluminum reels, prefix complete
Net lbs/kg Ship lbs/kg
model number with “SB” (for example: X Y
Electric 40/18.1 40/18.1
SBEPFF28-23-24). A D
Hydraulic 20/9.1 20/9.1
Air 20/9.1 20/9.1 7. Be sure to check dimensions and weights prior F
to ordering.

NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*** X, Y indicate mounting holes.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 11
C MANUAL OR POWER REWIND REELS
G
Series F7100 Dual
Hose
• Dual Agent Applications

H
To handle dual 3/4" through 1-1/2" I.D. hose.
• Two swivel joint inlets and two outlet risers.
• All models are available with optional aluminum or
stainless steel construction.
• Gear-driven crank rewind is standard. Choose chain
and sprocket drive powered by electric, hydraulic or
compressed air motor.
• Pinion brake standard.
• Standard inlet, outlet riser, and hub assembly are steel

X
(also available in stainless steel).
• Standard inlets: 1" 90° ball bearing swivel joint, Y
1" female NPT threads.

A
• Standard outlets: 1" male NST threads
(1.375" x 8 threads per inch). D
• Consult factory for other sizes and/or threads.
• Pressures to 1000 psi (69 bar).

F
• Temperatures from -25°F to +250°F (-32°C to+121°C). Consult
facotry for other pressures and temperatures.
E
• Rollers and roller mounting brackets are accessory items.
SBEPF7100 Series shown
Specify roller position. Standard configuration with optional
aluminum construction.

CAUTION: When using Niedner hose, a special riser

and/or larger drum diameter is required (consult factory).
See page 20.

SBEPF7100 Series shown

with optional aluminum construciotn and roller
and spool assembly high mount

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

12 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

Dual
Hose Series F7100
• Dual Agent Applications

PARTS DRAWING–F7100 – ISO 72; FF7200 – ISO 74

Approx. Weight
Hose Capacity of Reel Crank Rewind Reel Dimensions***
feet m lb. kg in. mm
Model see Note 3
Number I.D. in. 3/4 1 1-1/2
mm 19 25 38
O.D. in. 1-9/32 1-1/2 2-1/16
NET SHIP A B D E F F G H X Y
CRANK POWER
mm 33 38 52
2/75 2/50 – 109 151 23 17.5 20.5 23 32.5 34.5 23.5 12.12 15 16.75
F7126-23-24 2/23 2/15 – 49 68 584 445 521 584 826 876 597 308 381 425

Y
2/125 2/100 – 125 175 27.5 22 25.5 24.75 37 39 27.88 15.5 19.5 21.75
F7130-25-26 2/38 2/31 – 57 79 699 559 648 629 940 991 708 394 495 552
2/200 2/150 – 129 179 27.5 22 25.5 28.75 37 39 29.88 15.5 19.5 21.75
F7130-30-31 2/61 2/46 – 59 81 699 559 648 730 940 991 759 394 495 552

D
– 2/200 – 129 179 29 24 31.5 31.75 38.5 40.5 33.62 17.75 21.5 27.75
F7132-33-34 – 2/61 – 59 81 737 610 800 806 978 1029 854 451 546 705

Notes:
1. S
 pecifications subject to change. 5. For polished aluminum reels, prefix
2. Upon request, reels can be supplied with complete model number with “SB”
drum lengths other than shown and with (for example: SBEPF 7128-23-24).
disc sizes in other diameters. 6. Be sure to check dimensions and weights B E
3. Weights shown in chart are for crank prior to ordering.
rewind models. ADD these amounts for 6.5
power rewind models: 165
NOTICE: A flexible connector must be used
Net lbs/kg Ship lbs/kg between the inlet pipe and the inlet
Electric 40/18.1 40/18.1 swivel joint. C
10.5 G
Hydraulic 20/9.1 20/9.1 *** X, Y indicate mounting holes. 267
Air 20/9.1 20/9.1
H
4. When ordering power rewind models,
prefix model number with:
A = Air Rewind – supplied with control
valve and 18” air hose. X Y
EP = Electric Rewind (1/2 HP) – 12v and D
A
24v DC rewind reels supplied with
F
switch and solenoid. 115v AC rewind
reels are not supplied with switch,
but can be ordered separately.
HD = Hydraulic Rewind – not supplied with
control valve.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 13
C ARFF FIREFIGHTING REELS
G
Swing-Out Reel Booster
Hose

H
For Single or Dual Agent 1" through 1-1/2" I.D. hose.
Hose reels used primariliy in ARFF firefighting applications.
These reels mount inside truck cabinets and are designed
to swing out for ease of operation and accessibility. Equipped
with 2 pin locks to lock reel in stored position as well as 90°
to cabinet for forward deployment of hose line.
• 12v or 24v DC explosion-proof motor.
• Heavy-duty square tubing frame.
• Auxiliary bevel gear crank rewind with pinion brake.
• Inlet 90° FxF swivel joint.
X
• Outlet MNST is standard (other threads available). Y
• Swing-out frame includes bearings and brackets
for swing mount.
A
• Rollers available as an option. D
• Grab handle is standard.

F E
• Optional pivot release knob with multi-position lock
replaces 2 manual pin locks.
• Pressures to 1000 psi (69 bar).
• Other custom sizes and configurations available Grab handle Pivot release
depending on cabinet size. knob (optional)

• Right-hand version for passenger side compartment.

Left-hand version for driver side compartment. Shown with optional rollers

• Also usable in stored position.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

14 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 ARFF FIREFIGHTING REELS

Booster
Hose Swing-Out Reel

Mounting
Frame

1" or 1-1/2"
swivel joint
single or dual

Y Motor

D
Pin lock
locks reel Front view in truck (stored) Rear pin lock
inside locks reel
cabinet in deployed
position
Pin lock
for stored
position

Swing-out pivot bearings

Side view in truck (at top and bottom)
Mounting brackets and mounting frame.
attach reel to truck Includes built-in stop
cabinet to prevent over 90°
rotation/deployment

Auxiliary
crank
Rear pin lock rewind
Front view – deployed locks deployed
reel in place

Rear view – deployed

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 15
C MANUAL REWIND REELS
G
Series F3100/FF3600
• Industrial Fire Protection

H
To handle 3/4" through 1-1/2" I.D. booster hose
or 1" through 1-3/4" I.D. collapsible hose.
• The reel can be installed on the floor or wall.
• Steel construction is standard. Aluminum or stainless steel
construction is available.
• Choose disc rewind or removable direct crank rewind.
• Supplied with spring actuated pin lock.
• Standard inlet, outlet riser, and hub assembly are steel

X
(also available in stainless steel).
• Rollers and roller mounting brackets are accessory items.
Specify roller position. Y
Series F3100
A
• Standard inlet: 1" 90° ball bearing swivel joint D
with 1" female NPT threads.

F E
• Standard outlet: 1" male NST threads
(1.375" x 8 threads per inch).
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +225°F (-32°C to +121°C).

Series FF3600
• Standard inlet: 1-1/2" 90° ball bearing swivel joint
with 1-1/2" female NPT threads and 2" Victaulic® groove.
F3100 Series shown
• Standard outlet: 1-1/2" male NST threads Standard configuration
(1.990" x 9 threads per inch).
• Pressures to 600 psi (41 bar).
• Temperatures from -25°F to +175°F (-32°C to +79°C).

Both Series
• Consult factory for other sizes and/or threads.
• Consult factory for other pressures and temperatures.
• Removable crank rewind is standard.
• For hand over hand rewind option (less crank), consult factory.

CAUTION: When using Niedner hose, a special riser

and/or larger drum diameter is required (consult factory).
See page 20.

FF3600 Series shown

Standard configuration

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

16 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL REWIND REELS

Series F3100/FF3600
• Industrial Fire Protection

PARTS DRAWING – F3100 – ISO 113; FF3600 – ISO 111

Hose Capacity of Reel Approx. Weight
feet m Reel Dimensions***
Crank Rewind
in. mm
Round Hose Collapsible Hose lb. kg
Model
Number I.D. in. 3/4 1
mm 19 26
O.D. in. 1-9/32 1/2 x 1-3/4
NET SHIP A B D E F G H X
mm 33 13 x 44
100 200 85 120 13 7.5 25.5 24.75 25.5 27.88 15.5 7.75
F3116-25-26 30 61 39 54 330 191 648 629 648 708 394 197

Y
150 350 94 129 17 11.5 25.5 24.75 29.5 27.88 15.5 9
F3120-25-26 46 107 43 59 432 292 648 629 749 708 394 229
200 450 103 138 21 15.5 25.5 24.75 33.5 27.88 15.5 13
F3124-25-26 61 137 47 63 533 394 648 629 851 708 394 330
275 650 113 155 25.5 20 25.5 24.75 37 27.88 15.5 17.5
F3128-25-26

D
84 198 51 70 648 508 648 629 940 708 394 445
350 – 103 153 21 15.5 25.5 28.75 33.5 29.88 15.5 13
F3124-30-31 107 – 47 70 533 394 648 730 851 759 394 330
450 – 113 143 27.5 22 25.5 28.75 40 29.88 15.5 19.5
F3130-30-31 137 – 51 65 699 559 648 730 1016 759 394 495
Hose Capacity of Reel Approx. Weight
feet m Reel Dimensions***
Crank Rewind
in. mm
Round Hose Collapsible Hose lb. kg
Model
Number I.D. in. 1-1/2 1-1/2 1-3/4
mm 38 38 44
O.D. in. 2-1/16 3/4 x 3 7/8 x 3-1/4
NET SHIP A B D E F G H X
mm 52 19 x 76 22 x 83
75 150 75 104 139 17 11.5 25.5 24.75 30.75 27.88 15.5 9
FF3620-25-26 23 46 23 47 63 432 292 648 629 781 708 394 229
75 150 100 113 148 21 15.5 25.5 24.75 34.75 27.88 15.5 13
FF3624-25-26 23 46 30 51 67 533 394 648 629 883 708 394 330
100 200 150 123 173 25.5 20 25.5 24.75 39.25 27.88 15.5 17.5
FF3628-25-26 30 61 46 56 78 648 508 648 629 997 708 394 445
100 250 150 124 174 21 15.5 25.5 28.75 34.75 30.38 15.5 13
FF3624-30-31 30 76 46 56 79 533 394 648 730 883 772 394 330
150 300 250 134 184 25.5 20 25.5 28.75 39.25 30.38 15.5 17.5
FF3628-30-31 46 91 76 61 83 648 508 648 730 997 772 394 445
200 400 350 147 197 31.5 26 25.5 28.75 45.25 30.38 15.5 23.5
FF3634-30-31 61 122 107 67 89 800 660 648 730 1149 772 394 597
250 450 350 138 188 27.5 22 25.5 31.75 41.25 32.38 16.5 19.5
FF3630-33-34 76 137 107 63 85 699 559 648 806 1048 822 419 495

Notes:
1. S
 pecifications subject to change. 4. 4" clearance needed for crank handle removal.
2. Upon request, reels can be supplied with drum lengths 5. Be sure to check dimensions and weights prior to ordering.
other than shown and with disc sizes in other diameters. NOTICE:  A flexible connector must be used between the inlet
3. Power rewind is not available on these models. pipe and the inlet swivel joint.
See Series F or FF. ***X, Y indicate mounting holes.

E B E B

C C
10.5 10.5
G 267 G 267

H H

Y Y
21.75 X 21.75 X
552 552
A A
D D
25.5 25.5 F
648 F 648

F3100 FF3600

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 17
C MANUAL OR POWER REWIND REELS
G
Series LD Reels and Spools Large
Diameter

H
Reels and spools to handle up to 6" I.D. collapsible hose.
Typical Installations:

X
Single large-capacity reel installed in the hose bed area to
handle long lengths of pre-coupled hose. Hose pays out from
the top of the reel so gravity assists unwinding.
Two reels installed in the hose bed. In this arrangement,
the upper reel is unloaded only if necessary. Payout and
rewinding of the upper reels are facilitated by the position
Y
of the lower reel. Two reels with larger-diameter discs and

A narrower drums can also be installed side-by-side in the

rear of the hose bed to handle approximately the same
amount of hose. This method allows a center walkway or
D
paying out two lines simultaneously if required.

F E
• Square tubing frames. Important: Hose capacity is based on the flat hose dimensions
• Heavy-gauge steel discs. listed below, with couplings at 100 foot intervals.
• Drums are formed by reinforced tie rods with radial supports.
• Pillow block ball bearings. Flat Hose Dimensions
• Chain and sprocket rewind with electric (12v or 24v) or hydraulic Thick x Width
rewind motor. I.D. in mm
• Hydraulic caliper disc brake. 1" 1/2 x 1-3/4 12.7 x 44.4
1-1/2" 3/4 x 3 19.0 x 76.2
Hydraulic Requirements 1-3/4" 7/8 x 3-1/4 22.2 x 79.4
• It is important that the end-user provide Hannay Reels with 2" 3/4 x 3-1/2 19.0 x 88.9
complete specifications as to the required operation of the 2-1/2" 3/4 x 4 19.0 x 101.6
large diameter reel being specified. Any speed and torque
3" 1/2 x 5 12.7 x 127.0
requirements MUST be known to properly specify the correct
reel for the application. 4" 1/2 x 6-1/2 12.7 x 165.1
• Hannay Reels does not recommend specific brands for hydraulic 5" 1/2 x 8 12.7 x 203.2
system components. We suggest you work with your hydraulic 6" 1/2 x 10 12.7 x 254.0
component supplier to meet your specs.
Custom sizes are available to meet specific needs.
Custom Reels
• The standard models listed represent the most frequently
specified customer requirements for handling large-diameter fire
hose. Because of the many possible variations in reel installation
and hose capacity requirements, we will also custom build reels
and spools to your specifications to become an integral part of
the apparatus. Reels are built of steel construction, and various
finishes are available.

Consult factory for complete specifications on an LD reel to meet

your requirements.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

18 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 MANUAL OR POWER REWIND REELS

Large
Diameter Series LD Reels and Spools
Configurations

PARTS DRAWING – ISO 104

Approx. Weight
Hose Capacity of Reel (Steel) Reel Dimensions
Model feet m Crank Rewind in. mm
Number lb. kg

I.D. in. 1-1/2 1-3/4 2 2-1/2 3 4 5 6 A A B D E G H

NET SHIP HYD ELECT
mm 38 44 51 64 76 102 127 152 REWIND REWIND
800 600 600 600 600 500 250 – 370 450 65.5 63 54 30.5 30 39 24
LD268-30 244 183 183 183 183 152 76 – 168 204 1664 1600 1372 775 762 991 610

Y
1000 700 800 700 800 600 350 – 385 465 65.5 63 54 33.5 33 42 25.5
LD268-33 305 213 244 213 244 183 107 – 175 211 1664 1600 1372 851 838 1067 648
– 400 350 350 400 300 200 – 365 465 31.5 29 20 39.5 39 45 25.5
LD234-39 – 122 107 107 122 91 61 – 166 211 800 737 508 1003 991 1143 648
– 500 600 500 500 400 300 – 381 481 39.5 37 28 39.5 39 45 25.5
LD242-39

D
– 152 183 152 152 122 91 – 173 218 1003 940 711 1003 991 1143 648
– – – – 1100 800 600 – 421 521 59.5 57 48 39.5 39 45 25.5
LD262-39 – – – – 335 244 183 – 191 236 1511 1448 1219 1003 991 1143 648
– – – – – 1050 800 – 445 545 71.5 69 60 39.5 39 45 25.5
LD274-39 – – – – – 320 244 – 202 247 1816 1753 1524 1003 991 1143 648
500 400 – 427 557 40 – 28 45.5 45 51 28.5
LD242-45 152 122 – 194 253 1016 – 711 1156 1143 1295 724
1100 900 – 467 597 60 – 48 45.5 45 51 28.5
LD262-45 335 274 – 212 271 1524 – 1219 1156 1143 1295 724
1400 1100 – 491 621 72 – 60 45.5 45 51 28.5
LD274-45 427 335 – 223 282 1829 – 1524 1156 1143 1295 724
800 500 300 581 731 40 – 28 52.5 52 58 32
LD242-52 244 152 91 264 332 1016 – 711 1334 1321 1473 813
1500 1300 800 621 771 60 – 48 52.5 52 58 32
LD262-52 Electric
457 396 244 282 350 1524 – 1219 1334 1321 1473 813
rewind not
available 2000 1500 1200 645 795 72 – 60 52.5 52 58 32
LD274-52 on these 610 457 366 283 361 1829 – 1524 1334 1321 1473 813
models 1300 1000 700 657 817 48 – 36 56.5 56 62 34
LD250-56 396 305 213 298 371 1219 – 914 1435 1422 1575 864
1800 1500 900 681 841 60 – 48 56.5 56 62 34
LD262-56 549 457 274 309 381 1524 – 1219 1435 1422 1575 864
2300 1700 1400 705 865 72 – 60 56.5 56 62 34
LD274-56 701 518 427 320 392 1829 – 1524 1435 1422 1575 864
1700 1300 900 1130 1330 50.25 – 36 64.75 64 70 38
LD350-64 518 396 274 513 603 1276 – 914 1645 1626 1778 965
3000 2000 1900 1200 1400 74.25 – 60 64.75 64 70 38
LD374-64 914 610 579 544 635 1886 – 1524 1645 1626 1778 965

Version F Reel: V E B

Complete reel assembly with No. 50 chain and sprocket and hydraulic E C
10.5
rewind motor mounted inside the frame. When ordering, use prefix R 267
model number with HD (for example: HDLD 350-64 version F). S
Version G Reel:
I G
O H
(High profile) complete reel assembly with chain and sprocket drive and N
electric rewind motor, including clutch and double reduction unit. Motor
is mounted inside the frame. Disc diameters (E dimension) up to and F D A
including 39" only. When ordering, use prefix model number with EP
(for example: EPLD 242-39 version G). “F” dimension = “A” dimension +5". V
E B
C
E 267
10.5
Notes: 267
R
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes
S G
in other diameters. I
H
3. Be sure to check dimensions and weights prior to ordering. O
N
G D A
F

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 19
C FIREFIGHTING REELS
G
Mercedes and Niedner Capacities
H
Mercedes Hose

Hose Capacity of Reel Approx. Weight Reel Dimensions***

feet m lb. kg in. mm
Reel Model
Number I.D. in. 3/4 1 1-1/2
STEEL ALUMINUM
mm 19 25 38
O.D. in. 1.062 1.281 1.812 A B C D E F G H X Y
NET SHIP NET SHIP POWER
mm 27 33 46
100 – – 46 81 – – 21 16 8 14.5 19 27 18.12 9.88 19.5 10
F4024-17-18 30 – – 21 37 – – 533 406 203 368 483 686 460 251 495 254
200 – – 57 92 – – 27 22 8 14.5 19 33 18.12 9.88 25.5 10

X Y
F4030-17-18 61 – – 26 42 – – 686 559 203 368 483 838 460 251 648 254
100 – – 72 107 – – 21 16 8 15.5 20.5 27.5 18.12 9.88 13.5 12.25
F4124-17-18 30 – – 33 49 – – 533 406 203 394 521 699 460 251 343 311
200 – – 83 118 – – 27 22 8 15.5 20.5 33.5 18.12 9.88 19.5 12.25
F4130-17-18

A
61 – – 38 54 – – 686 559 203 394 521 851 460 251 495 311

D
175 150 – 102 144 80 122 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
  * F 32-19-21 53 46 – 46 65 36 55 749 610 267 521 549 873 546 308 546 425
200 150 – 92 134 75 117 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
  * F 24-23-24 61 46 – 42 61 34 53 533 394 267 521 584 657 597 308 330 425

F E
300 200 – 105 147 82 124 27.5 22 10.5 20.5 23 32.38 23.5 12.12 19.5 16.75
  * F 30-23-24 91 61 – 48 67 37 56 699 559 267 521 584 822 597 308 495 425
200 150 – 100 150 80 130 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
  * F16.5-30-31 61 46 – 45 68 36 59 343 203 267 648 730 467 759 394 140 552
300 200 – 107 157 83 133 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
  * F 20-30-31 91 61 – 49 71 38 60 432 292 267 648 730 556 759 394 229 552
– – 100 138 188 100 150 29.5 24 20 25.5 28.75 36.25 29.88 15.5 21.5 21.75
FF32-30-31-20 – – 30 63 54 45 68 749 610 508 648 730 921 759 394 546 552
– – 200 140 194 106 160 31 26 20 31.5 31.75 37.75 33.62 17.75 23.5 27.75
FF34-33-34-20 – – 61 64 88 48 73 787 660 508 800 806 959 854 451 597 705

Niedner Hose

Hose Capacity of Reel Approx. Weight Reel Dimensions***

feet m lb. kg in. mm
Reel Model
Number I.D. in. 3/4 1 1-1/2
STEEL ALUMINUM
mm 19 25 38 A B C D E F G H X Y
O.D. in. 1.075 1.325 1.825 POWER
NET SHIP NET SHIP
mm 27 34 46
100 – – 98 140 76 118 25.5 20 10.5 20.5 21.62 30.25 21.5 12.12 17.5 16.75
* F28-19-21-10.5 30 – – 44 64 34 54 648 508 267 521 549 768 546 308 445 425
200 – – 94 136 71 113 23 17.5 10.5 20.5 23 27.88 23.5 12.12 15 16.75
* F26-23-24-10.5 61 – – 43 62 32 51 584 445 267 521 584 708 597 308 381 425
– 100 – 92 134 75 117 21 15.5 12 20.5 23 25.88 23.5 12.12 13 16.75
* F 24-23-24-12 – 30 – 42 61 34 53 533 394 305 521 584 657 597 308 330 425
– 200 – 113 155 87 129 25.5 20 12 25.5 24.75 32.25 27.88 15.5 17.5 21.75
F28-25-26-12 – 61 – 51 70 39 59 648 508 305 648 629 819 708 394 445 552
– – 100 138 188 100 150 29.5 24 20 25.5 28.75 36.25 29.88 15.5 21.5 21.75
FF32-30-31-20 – – 30 63 54 45 68 749 610 508 648 730 921 759 394 546 552
– – 200 140 194 106 160 31 26 20 31.5 31.75 37.75 33.62 17.75 23.5 27.75
FF34-33-34-20 – – 61 64 88 48 73 787 660 508 800 806 959 854 451 597 705

Notes:
1. Specifications subject to change. NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
2. These reels require a special angle riser and larger diameter drum; consult factory. *The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension
3. For F Series – Refer to notes and diagram on page 7. for 1/2 HP motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling
200' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
4. For FF Series – Refer to notes and diagram on page 11.
*** X, Y indicate mounting holes.

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

20 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 FIREFIGHTING REELS

Hannay Reels Versatility

Firefighting and rescue operations

around the country depend on the
versatility of Hannay Reels.
For decades, Hannay Reels has set the standard
of quality and reliability for hose reels in the
firefighting industry.
But as the needs of the industry change, so do our
reels. Hannay prides itself on being able to conform
to new standards required by the firefighting industry –

Y reels that fit into side compartments or bumper

mounts, open reel installation or swing-out reels
for easy, quick access.

Through research and development of internationally recognized standard models,

to custom one-of-a-kind applications, Hannay continues to meet the specific needs
of the vehicle or individual fire department.
In supplying both apparatus manufacturers and aftermarket fire departments
worldwide, Hannay has consistently serviced the needs of the industry. With
Hannay reels, there’s no draining, stacking or dragging. Plus, firefighters appreciate
quick attack and fast pick-up.

What size reel

can we build for you?

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 21
C FIREFIGHTING REELS
G
Hannay Reels Sales Policies
H
Hannay Reels 3-Year Limited Warranty
Products manufactured by Hannay Reels, Inc. (“Hannay”) are Components not manufactured by Hannay will be subject to
warrantied for 3 years from date of shipment when properly the original manufacturers’ warranties. Examples of such
installed, maintained, and operated in accordance with components include: hose and cable, motors, speed controls,
Hannay instructions. In no event will Hannay have a warranty and switches, swivel joints and seals, slip ring and brush
obligation for normal wear and tear, or for products that have, assemblies.
at Hannay’s determination, been subjected to accident, abuse,
misapplication, improper installation or improper maintenance. Equipment which proves to be defective upon our inspection will
Common examples of normal wear and tear would include paint be replaced free of charge, including freight to the customer.

X Y
finish, swivel joint seal wear, and switch or motor brush wear. Our responsibility ceases upon delivery to any common carrier
and we do not, unless previously instructed, insure shipments
Hannay makes no warranties, express or implied, other than beyond point of delivery to such carrier. No material will be
those included in this warranty statement, and we disclaim any accepted for return without a return goods authorization

A D
implied warrant of merchantability or fitness for any particular (RGA). This warranty extends to the replacement or repair of the
purpose. Hannay will not be liable for any consequential, reel or part (no labor).
incidental, or indirect damages from any cause whatsoever.
Hannay reserves the right to modify or alter materials,
Failure to use a flexible inlet connection on any live hose reel

F E
dimensions, design, and construction when necessary to
will void the swivel joint warranty. Failure to use a properly sized improve the performance of the reel and/or accessories, or to
circuit breaker with any electric rewind motor will void the electric meet delivery requirements.
motor warranty. Failure to use a filter and lubricator on any air
rewind motor will void the air motor warranty. Failure to follow
all procedures outlined in the Safety Guidelines document will
void the warranty.

Notice on Reel Finish

Standard finish on Hannay reels is a high performance modified In cases where requirements cannot be met with the standard
acrylic enamel paint. Standard color is metallic graphite. Other finish, Hannay Reels can coat any model reel with an automotive
colors available at no additional cost include red, white, black, primer, allowing application of final coating at your facility.
and primer. Alternatively, Hannay Reels can provide a quote for matching a
customer-provided paint specification. For further information,
Most of the major components on standard reels are e-coated please contact your Hannay Reels sales engineer and a special
prior to receiving final topcoat paint finish. This combination of paint request form will be sent to you.
e-coat and enamel topcoat will meet the finish requirements of
most customer applications and environments. For environments where no paint finish is suitable, we offer
both aluminum and stainless steel (304 grade) construction on
most reel models.

Return Goods Policy

All Hannay reels are built to order. These orders are typically Authorization (RGA) form. A signed copy of this form must
placed into production within 1 business day of receipt. Once accompany the material when returned to us, with the RGA
production begins, it may not be possible to cancel the order. number clearly showing on the outside of the box—a label is
provided to you that you can print and attach. No product will be
accepted for return or credit without an authorized RGA number.
To prevent returns because the wrong reels or parts were
ordered, please use the Hannay Reels Spec Worksheet (either
online or from our Order Accessory Guide) when specifying All material must be returned prepaid, unless otherwise noted
reels. Be sure to include any size, weight, pressure and/or on our RGA. No return will be accepted that has been damaged
material compatibility limitations for the application. due to improper return packaging, tampered with or altered
from its original condition. Our restocking and handling fee is a
minimum of 25% for standard catalog reels and parts. Custom
In the event that an item does need to be returned for credit,
reels specially built to customer specifications cannot be
repair or replacement, prior approval must be obtained from
returned for any reason.
Hannay Reels. Upon your request, we will send a Return Goods

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464 [Link]

22 Hannay Reels, Inc. Toll Free: 1-877-467-3357 International FAX: 518-797-3259 reels@[Link]
 HOW DO I GET THE RIGHT HOSE REEL?

Hose Reel Spec Worksheet

To specify Hannay reels, fill out this simple form and mail, fax or email it to your dealer.
Photocopy this page or download and print from [Link]

1. Who is the reel for?

Contact Date /     /
Company Position

Street Address

City State Zip Country

Phone (       ) Fax (       ) Email

Y 2. What is the reel for?

HOSE (check one): Storage only Live Single hose Live Dual hose
Indicate your custom specifications

D
Inside diameter: Hose length: Bend radius: Flat hose dimensions:

Outside diameter: Hose weight: Coupling spacing:

Type of product handled live application (check one):

Liquid (specify): Temperature: Oxygen/Acetylene: Other (specify):

Gases (specify): Pressure: Hydraulic fluid (specify):

Fluid path type (check one): Steel (standard) Aluminum Stainless Steel Other 4. Specifying Location
of Components
Reel inlet type (check one): Swivel joint 90° (standard) Straight Optional Location of Components:
Location of the inlet, outlet riser, and rewind
Reel outlet type (riser): Size:
mechanism can be varied to meet your
requirements and must be specified on
Thread (check one): National Pipe Thread (NPT) Joint Industry Committee (JIC) Other (specify):
your order. Unless otherwise specified,
most reels will be shipped as Right Top
National Standard Thread (NST) British Standard Pipe (BSP) Rewind with the inlet, outlet riser, and
rewind mechanism on the operator’s right.

RT – Right Top Rewind

3. What features does the reel need? Check type of rewind: Standard – Always look at
your reel from this position
MANUAL REWIND to determine right hand or
left hand.
Disc rewind (hand over hand) Gear-driven crank Direct crank (permanent or removable) Chain-driven crank
RB – Right Bottom Rewind
POWER REWIND
Spring Air Electric (voltage): Hydraulic
LT – Left Top Rewind
Type of installation (check one): Floor Wall Overhead Vehicle

Temperature Range: Environment:

LB – Left Bottom Rewind
Accessories (if any): Hose Stop: Yes No

Roller Assemblies:
Note: Use component location initials as suffix
Finish: Painted steel (standard) Aluminum Polished Unpolished Stainless steel Polished Unpolished after model number (ie: EF32-23-24 RT)

Check type of installation and roller position for spring reels:

5. P
 lease note size and/
 rag
D L ift  tretch (no roller)
S  all Mount
W  ecovery (pick-up)
R or weight limitations
Position SR Position VR Position TR Position TR (no roller) for your installation
SPECIFICATIONS

Depth:

Height:
or
or
or
Width:
Constant tension available on all roller positions
Weight:

For custom applications not found in our catalogs,

call the Inside Sales Group at 518-797-3791.

[Link] Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

reels@[Link] Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Hannay Reels, Inc. 23
FIRE FIGHTING REELS
You Can’t Buy A Better Reel.
SeriesXXX
Find reels for every need.
Learn more about all of our reels, including specs, drawings, and even
how to select the right reels and accessories for your industry.

You Can’t Buy A Better Reel. You Can’t Buy A Better Reel. You Can’t Buy A Better Reel.

Rescue Reels Industrial Hose Reels Cable Reels

| Rescue and HazMat Operations | Agriculture | Grounds Maintenance and MRO | Electric Tools |
| HazMat Situations | Vehicular Extrications | At-the-scene Emergencies | | Washdown | Chemical Transfer | Potable Water | Food Processing | Bottling Plants |
| Portable Lighting | Broadcast/Entertainment | Auxiliary Leads for Power Generation |
| Breathing and Utility Air Applications | | Pharmaceuticals & Cosmetics | Fueling | Fire Protection | Dairy Operations |
| Hoist and Crane Operations | Static Grounding | Utility Grounding | Video Inspection |

You Can’t Buy You Can’t Buy You Can’t Buy

A Better Reel. A Better Reel. A Better Reel.

Family owned and operated since 1933 Family owned and operated since 1933 Family owned and operated since 1933

Only one reel is built strong Rescue Reels Hose Reels Cable Reels
to last long. Details on: Includes specs and Find out more about:
• Utility or breathing air information on: • Manual and power
Our reels are custom designed to meet your hose reels • High pressure spring rewind reels
unique specs, never retrofitted to the job. • Live electric cable reels rewind reels • Storage reels
So no matter how small the footprint, you • Power rescue tool reels • Compact manual • Reels for live
can expect superior performance every time. • Portable electric rewind reels electric cable
And we only use high quality, heavy-duty cable reels • Power rewind reels • Portable reels
materials – never plastic – which is why our • Portable storage reels • Static and truck
reels often outlast the vehicles they’re on. • Hose assemblies grounding reels
For reels that outlast and outperform all
the others, you can depend on Hannay, the
leader in OEM, industrial, and commercial
reel applications.
View all our reel catalogs online
at [Link]
Family owned and operated
since 1933, Hannay Reels is the
world leader in both OEM and
aftermarket applications. Hannay
offers thousands of standard hose
reel and cable reel models, as well
as unmatched custom capabilities.
We can easily and affordably
customize a reel to meet your
exact specifications – built to
last, delivered fast. Additional
catalogs are available through
your local Hannay Reels dealer
or online at [Link].

All Hannay reels are constructed of

quality heavy gauge steel (optional
553 State Route 143 | Westerlo, New York 12193 aluminum or stainless steel also
Email: reels@[Link] | [Link] available on most models).

Phone: 518-797-3791 Domestic FAX: 1-800-733-5464

Toll Free: 1-877-467-3357 International FAX: 518-797-3259 Form H-0502-F Rev 4 WEB 1-18 MADE IN U.S.A.
Reel Product News
Portable Reels for 1" Forestry and Standard Lay Flat Hose
Hannay Reels offers two lightweight and portable hose
storage reels – ideal for Forestry lay flat or Standard lay flat
hose – when extra lengths are needed in an emergency.

Model C16-10-11
• Small, lightweight, durable.
Model C16-10-11
• Adjustable cam-lock drag brake.
shown with optional red finish
• Permanent crank rewind.
• For forestry lay flat hose, extension cord or rope.

Model C20-14-16
• Strong, portable.
• Adjustable cam-lock drag brake.
• Permanent crank rewind.
• Optional pin lock available.
• For forestry lay flat hose, standard lay flat hose,
extension cord or rope. Model C20-14-16
shown with optional red finish

Parts Drawing – Model C16-10-11 – ISO 88; Model C20-14-16 – ISO 121
Hose Capacity of Reel
feet m Approx.
Reel Dimensions
Weight
Model Forestry Standard in. mm
lb. kg
Number Lay Flat Lay Flat
I.D. in. 1 1
mm 25 25
NET SHIP A B C D E F G H
100 – 10 17* – 7.5 4 11.88 10.75 12.25 14.75 6.88
C16-10-11 30 – 5 8 – 191 102 302 273 311 375 175
200 100 18 58* 15 12 6 15.5 14 16.75 19 8.62
C20-14-16 61 30 8 26 381 305 152 394 356 425 483 219
Notes:
3. Be sure to check dimensions and weights prior to ordering.
1. Specifications subject to change.
*Dimensional weight applies when shipped as a parcel package
2. These storage reels have no live connections.
(via FedEx or UPS Ground).

F F
B E
B E

G C G

H H

A D A D

Model C16-10-11 Model C20-14-16

553 State Route 143 | Westerlo, NY 12193 | [Link]

Phone: 518-797-3791 | Fax: 518-797-3259 | Email: reels@[Link]
Toll Free: 1-877-467-3357 | Toll Free FAX: 1-800-733-5464