Scribd
Upload
2K views2 pages

JSA Chipping

1. The document provides a job safety analysis for chipping concrete at a tank barrier in Soekarno-Hatta. 2. It lists required personal protective equipment including safety glasses, dust masks, coveralls, hard hats, and gloves. 3. The analysis identifies potential hazards at each step such as injury from tools, dust inhalation, and cuts, and provides control statements to ensure safety like using PPE, checking tools, and cleaning the work area.

Uploaded by

Kidung pamungkas Pamungkas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views2 pages

JSA Chipping

1. The document provides a job safety analysis for chipping concrete at a tank barrier in Soekarno-Hatta. 2. It lists required personal protective equipment including safety glasses, dust masks, coveralls, hard hats, and gloves. 3. The analysis identifies potential hazards at each step such as injury from tools, dust inhalation, and cuts, and provides control statements to ensure safety like using PPE, checking tools, and cleaning the work area.

Uploaded by

Kidung pamungkas Pamungkas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

JOB SAFETY ANALYSIS

( JSA )

Job Description: CHIPPING DINDING BETON


Area/Unit : Dinding pembatas tanki DPPU Soekarno - Hatta DATE ISSUED : Nopember 2009
WO No : LAST REVIEWED DATE :

References : SHE Standard Manual Page 1 of 3

PPE Required to do this Job:  Safety glasses  Dust/weldingmask  Coveralls  Safety harness/lifelines  Hard hats
 Goggles/faceshield  Cartridge-filter mask  Chemical clothing  Life vest  Welding helmet
 Earplug/Earmuff  SCBA/SABA  Leather/chemical gloves  Leather/chemical boots  Others
IF YOU DON’T MEET THE REQUIREMENTS AS STATED IN THIS PROCEDURE DO NO PERFORMING THE JOB

Machine/Equipment/Tool
JOB STEP Potential Hazard/Loss Control Statement
involved in each step

1. Pre-Job Kesalahan pemakaian alat - Lakukan persiapan sebelum bekerja


Pemakaian alat tidak tepat - Periksa peralatan sebelum digunakan
Pemakaian alat salah - Persiapkan peralatan sesuai pekerjaan
Pekerjaan tidak sesuai isi permit - Sosialisasikan pada karyawan
- Dapatkan permit sesuai pekerjaan
- Pemeriksaan ulang terhadap peralatan

2. Chipping Palu & Pahat Tangan terpukul - Gunakan PPE sesuai standard
Mata kemasukan debu - Yakinkan kembali posisi kerja benar benar aman
- Pemeriksaan ulang terhadap peralatan kerja

/conversion/tmp/scratch/457400451.doc
3. Clean Up Tangan Tergores - Gunakan PPE standard
Terhisap debu - Pastikan lokasi kerja bersih sebelum meninggalkan lokasi kerja

Prepared by / Disiapkan Supervisor Aprovel By :

_____________________________ ________________________ __________________________


SHE MANAGER PT. PERTAMINA

You might also like