Product Overview v1.
PS3112-S12DC the Enterprise SATA SSD
The Phison Electronic PS3112-S12DC SATA III SSD is
the latest generation of our maximum performance
SATA III SSD controller. The new S12DC is designed to
fully utilize and maximize the SATA III interface. Offering
capacities of up to 8TB and sustained performance of
up to 550MB/s in Sequential Reads and 530MB/s in
Sequential Writes.
Utilizing an advanced 28nm process technology,
incorporating the LDPC 3.0 ECC engine, the
CoXProcessor 2.0, and the DSP 2.0, the S12DC will
maximize endurance, reduce latencies, and provide
consistent performance on various workloads
Advanced Features
LDPC 3.0 ECC Engine Power Loss Data Protection
Phison’s 3rd generation LDPC ECC Engine can Power loss protection is provided using additional
correct up to 160 bits/2k via the hard decoder and circuitry and capacitors. This gives the S12DC
up to 400bits/2k via the soft decoder. This will additional power and time to flush the data residing
ensure that your data can be protected throughout in the DRAM and buffers. This ensures the data
the life of the SSD. integrity of the drive and protects against data
corruption in the event of power loss or system
failures.
Encryption End-to-End Data Protection
For data security, the PS3112-S12DC supports AES From the moment the data enters the SSD, the
256 bit hardware-based encryption. The S12DC is S12DC generates associated parities to prevent soft
also fully compliant with Trusted Computing Group errors. The data is safeguarded from corruption at
(TCG) Opal Specification. every step of the way from the host device to the
NAND flash.
The data within this specification is subject to change by Phison without notice. Performance numbers may vary based on system configuration
and testing conditions.
COPYRIGHT © 2018 PHISON ELECTRONICS, ALL RIGHTS RESERVED.
Controller PS3112-S12DC
Capacities Up to 8TB
Interface SATA III 6Gb/s
Form Factor 2.5"(7mm)
NAND Flash 3D TLC
Sustained Performance (Up to)1, 2
Sequential Read 550 MB/s
Sequential Write 530 MB/s
4K Random Read 90K IOPS
4K Random Write 67K IOPS
4K Mixed Read / Write 70/30 85K IOPS
Quality of Service (99.9%)
4K Random Read QD1 Latency 180µs
4K Random Write QD1 Latency 40µs
Reliability
UBER 1 in 1016
Power
Max <6W
Idle 115mW
Temperature
Operating 0°C ~ 70°C
Non-Operating -40°C ~ 85°C
• LDPC
• Power loss Data Protection
Advanced Features
• End-to-End Data Protection
• Encryption
1) 1MB/s = 1,000,000 bytes / second
2) Performance measured using IOmeter version 1.1 on the full LBA span of the test drive.
• Sequential 128K queue depth 32,
• Random queue depth 32 with 4 workers
• 4K = 4096 bytes
The data within this specification is subject to change by Phison without notice. Performance numbers
may vary based on system configuration and testing conditions.
COPYRIGHT © 2018 PHISON ELECTRONICS, ALL RIGHTS RESERVED.
