Scribd
Upload
99 views6 pages

Tdi 50000 Tpy, GNFC

This document provides specifications for a dual plate wafer type check valve with the following key details: 1. The valve is to be used in an ACS/3 process with a maximum design pressure of 1.1 kg/cm2 and maximum temperature of 147°C. 2. It will have a wafer type body constructed of A216 Gr WCB with SS316 seat ring, disc sealing o-ring, and A351 Gr CF8M disc/closure plate. 3. Dimensions and connections are to meet ASME B16.34 and B16.5 standards, with 150# RF serrated finish flanges and a wafer-style end connection. 4. A quantity of

Uploaded by

krunal panchal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
99 views6 pages

Tdi 50000 Tpy, GNFC

This document provides specifications for a dual plate wafer type check valve with the following key details: 1. The valve is to be used in an ACS/3 process with a maximum design pressure of 1.1 kg/cm2 and maximum temperature of 147°C. 2. It will have a wafer type body constructed of A216 Gr WCB with SS316 seat ring, disc sealing o-ring, and A351 Gr CF8M disc/closure plate. 3. Dimensions and connections are to meet ASME B16.34 and B16.5 standards, with 150# RF serrated finish flanges and a wafer-style end connection. 4. A quantity of

Uploaded by

krunal panchal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

Doc.

Page
500-001M.02
No. No

Rev. Description By Chkd App.


500 Piping Engineering
TDI 50000 TPY, GNFC
R1 Issue to GNFC RAG RRM HDS
Project No:120 R0 For Enquiry RAG RRM HDS
500-001M.02 DATASHEET FOR DUAL PLATE WAFER TYPE CHECK VALVE
1 Item No. VCW627 5 Pressure Rating 150 #
(A) SERVICE

2 Process Fluid ACS/3 6 Design & Manuf. Std ASME B 16.34 / API 594

3 Max Design Press. 1.1 kg/cm2 7 Piping Specification CS623

4 Max. Design Temp. 147 °C

1 Type Dual Plate Check Valve (End to End / Face to


(B) CONSTRUCTION

7 ASME B 16.10
2 Body Wafer type Face Dim.)
3 Closure Plate Spring loaded Type
4 Disc Single Plate
5 Facing RF,Serrated

6 End Conn. Wafer, B16.5

1 Body A 216 Gr WCB 7 Hinge AISI 316


(C) MATERIAL

2 Seat Ring SS 316 8 Hinge Pin AISI 316


3 Disc Sealing (O-Ring) GFT 9 Spring AISI 316
4 Disc / Closure Plate A 351 Gr CF8M 10 Retainers NA R1
5 Disc Nut A194 Gr 8 11 Stop pin AISI 316
6 Cover Bolt/Nut A 193 Gr B7 / A194 Gr 2H
1 Inspection Std. API 598 6 Paint Epoxy
(D) INSPECTION &

2 Test Pressure (Kg/cm2) Hyd Air 7 Others


Body 32 -
TESTING

Seat 24 7
* 100% to clause 8.3.1.1 &
3 X-Ray
Annex. B of ASME B16.34
4 Inspection By IBIC/GNFC
5 Test Certificates Yes
Purchase order no : Vendor to specify
Notes:
1. Flow direction to be marked on valves.
2. All Valves Name Plate should be of SS304.
3. Valve ends shall be suitable for mounting between two 150#, RF, Serrated Finish Flanges, as per ASME B16.5.
4. Disc shaft must not penetrate body.
* 100% radiography testing one casting per heat lot / batch for body.
5. Vendor should send the specification sheet duly stamped & signed with "No deviations" as a token of acceptance. If there are deviations same
should be clearly highlighted & mentioned in the sheet itself or in Deviation Form.
Doc. Page
500-001M.02
No. No

Rev. Description By Chkd App.


500 Piping Engineering
TDI 50000 TPY, GNFC
R1 Issue to GNFC RAG RRM HDS
Project No:120 R0 For Enquiry RAG RRM HDS
1of 2

Date

23/12/2009
6/10/2009
ASHEET FOR DUAL PLATE WAFER TYPE CHECK VALVE
150 #
ASME B 16.34 / API 594

CS623

ASME B 16.10

AISI 316
AISI 316
AISI 316
NA
AISI 316

Epoxy

Vendor to specify

n two 150#, RF, Serrated Finish Flanges, as per ASME B16.5.

/ batch for body.


stamped & signed with "No deviations" as a token of acceptance. If there are deviations same
sheet itself or in Deviation Form.
1of 2

Date

23/12/2009
6/10/2009
Doc.
500-001M.02 Page No 2 of 2
No.
Rev. Description By Chkd App. Date
500 Piping Engineering
TDI 50000 TPY, GNFC

Project No:120 R0 For Enquiry RAG RRM HDS 6/10/2009


500-001M.02 DATASHEET FOR DUAL PLATE WAFER TYPE CHECK VALVE
(E) QUANTITY SCHEDULE
ITEM NO: VCW627

10% Total
Actual Total Procurement Qty Total Procurement Qty
Sr.No. Valve Code Size Contingen Procurement
Qty. (Enquiry) (Final)
cy Qty (90%)

1 VCW 627 20" 3 1 4

You might also like