Scribd
Upload
43 views1 page

Macosx Installation: Instruction For: Os X 10.5 and Later

The document provides instructions for installing the Arduino IDE on Mac OS X version 10.5 or later. The steps include downloading the IDE zip file, copying the Arduino application to the Applications folder, connecting the Arduino board via USB, and allowing any driver installation dialogs without needing to install additional drivers. It also notes that the Arduino board will appear as "Not Configured" but will still function after installation is complete.

Uploaded by

John Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views1 page

Macosx Installation: Instruction For: Os X 10.5 and Later

The document provides instructions for installing the Arduino IDE on Mac OS X version 10.5 or later. The steps include downloading the IDE zip file, copying the Arduino application to the Applications folder, connecting the Arduino board via USB, and allowing any driver installation dialogs without needing to install additional drivers. It also notes that the Arduino board will appear as "Not Configured" but will still function after installation is complete.

Uploaded by

John Smith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

17

MAC OS X Online version


INSTALLATION [Link]/mac

INSTRUCTION FOR:
❶ When the download of the IDE finished, double-click the .zip fle.
This will expand the Arduino application.
OS X 10.5 AND
LATER
❷ Copy the Arduino application into the Applications folder, or
wherever else you wish to install the software.

❸ Connect the board to the computer with the USB cable. The
green power LED (labeled PWR) should turn on.

❹ You do not need to install any drivers to work with the board.
Depending on the version of OS X that you are running, you
might get a dialog box asking if you wish to open the “Network
Preferences”. Click the “Network Preferences...” button, and then
click “Apply”.

❺ The Uno will show up as “Not Configured”, but it is still working.


You can quit the System Preferences.

Congratulations! You have Arduino all set up and you're ready to


start making projects.

If you’re using Linux, please visit the website for instructions:


LINUX
[Link]/linux
INSTALLATION

You might also like