Switching Power Supply Redundant Module
Type SPD24RM20
DIN rail mounting
• Installation on DIN Rail 7.5 or 15mm
• 2 “Power Rdy” relay outputs
• Up to 480W output
• Unlimited number of connectable redundant power
supplies
• Very compact dimensions
• UL, cUL listed
• TUV approved
• Ce and RoHS compliant
Product Description Ordering Key SP D 24 RM 20
This SPD additional module is always guaranteed, even in Model
allows the connection of 1 case of failure of one power Mounting ( D = Din rail )
power supply +1 or more supply. 2 relay outputs provide Output voltage
additional redundant power voltage free outputs in order to Redundant module
supplies. In this case, the send the alarm to a control unit Maximum current
continuity of the 24VDC output when a failure occurs.
Approvals
art geprü
au f
B
t
Rheinland
Product Safety
d
T
y
p
e
e v
appro
Output Data Input Data
Output voltage drop 0.5V Rated input Voltage 21...28VDC
Output maximum Current 20A Number of inputs 2
Output Peak Current >5ms 30A Maximum input current 20A
Max Reverse Voltage 30V
Controls and Protections Approvals and EMC
Power RDY relay Output Shock resistance acc. to IEC 60068-2-27
OK input 20...30V ±5% (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
Fail input 20...30V ±5% Vibration resistance acc. to IEC 60068-2-6
Contact rating 1.0A (Mounting by rail: 10-500 Hz, 2G, along
X, Y, Z each Axis, 60 min for each Axis)
General Data UL / cUL UL 508 Listed
UL 60950-1 Recognized
Insulation Voltage
Input / Relay contact 100VDC TUV EN 60950-1, CB scheme
Insulation Resistance CE EN 55022 Class B,
Input / Relay contact @100VDC 100MΩ EN 55024,
EN 61000-4-2,
Operating temperature -25°C...+71°C
EN 61000-4-3,
Storage temperature -25°C...+85°C EN 61000-4-4,
Relative Humidity 20...95%RH EN 61000-4-6,
MTBF (Bellcore issue 6 @ 40°C, GB) 659,000h EN 61000-4-8,
EN 61204-3
Cooling Free air convection
Case material Plastic
Dimensions L x W x D 90 x 54 x 114mm
Weight 210g
1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 0940
Switching Power Supply Redundant Module
Type SPD24RM20
DIN rail mounting
Mechanical Drawings mm (inches)
114.0 [4.49]
L1 L2
1 2 3 4 5 6
A OK B OK
FAIL OK FAIL OK
A Rdy B Rdy
54.00 [2.13]
90.0 [ 3.6]
INPUT OUTPUT
7 8 9 10 11 12
Pin Assignment and Front Controls
Pin No. Designation Description
1 A Rdy Fail Relay normally closed contact (power supply A Fail)
2 A Rdy COM Relay common contact
3 A Rdy OK Relay normally open contact (power supply A OK)
4 B Rdy Fail Relay normally closed contact (power supply B Fail)
5 B Rdy COM Relay common contact
6 B Rdy OK Relay normally open contact (power supply B OK)
7 Input A+ Positive Input power supply A
8 Input B+ Positive Input power supply B
9 Input - Negative Input power supply A
10 Input - Negative Input power supply B
11 Output - Positive Output terminal
12 Output + Negative Output terminal
L1 A OK “A” power supply operation OK LED
L2 B OK “B” power supply operation OK LED
Typical Application Notes
1.) 1+1 Redundancy: Using 1 more PS as the redundant 2.) Single Use: Connecting only one PS to one SPD24RM20 to
unit. reduce the stress of the diodes and hence increase the reliability.
PS #1 PS #2 PS #1 PS #1
Vin A Vin B Vin A Vin B
SPD24RM20
SPD24RM20
SPD24RM20
Vout Vout Vout
Load Load
3.) 1+N Redundancy: Using more than one PS as redundant units to increase the reliability.
PS #1 PS #2 PS #3 PS #4 PS #N PS #N+1
Vin A Vin B Vin A Vin B Vin A Vin B
SPD24RM20
SPD24RM20
SPD24RM20
Vout Vout Vout
Load
0940 - Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
Switching Power Supply Redundant Module
Type SPD24RM20
DIN rail mounting
Circuit Diagram Installation
Ventilation and cooling Normal convection
All sides 25mm free space
for cooling is recommended
Vin A+
Relay OK Screw terminals 10-24AWG flexible or solid cable
A
RDY A
8mm stripping recommend
Control
Vin B+
Circuit Max. torque for screws terminals
FAIL
Input terminals 1.008Nm (9.0lb-in)
OK
Relay Output terminals 0.616Nm (5.5lb-in)
B
Vin- / Vout- Control RDY B Plug-in connectors 10-24AWG flexible or solid cable
Circuit 7mm stripping recommend
FAIL
Vout+ Max. torque for plug-in terminals
SPD24RM20 Input terminals 0.784Nm (7.0lb-in)
Output terminals 0.784Nm (7.0lb-in)
3 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 0940
