Scribd
Upload
1K views18 pages

Gpon Omci V2 Voice Configuration Introduction

The document provides information on configuring GPON OMCI V2 for voice services using SIP and H.248 protocols. It describes the necessary OMCI management entities (MEs) for voice configuration including IP host, TCP/UDP, VoIP, RTP profiles, and more. It then gives examples of OLT configuration commands to set up VLANs, QoS, bridging, and IP host settings. Specific SIP configuration such as URI profiles, authentication, and SIP-CONFIG are also shown. Finally, the document outlines the OMCI V2 models for SIP and H.248 call flows.

Uploaded by

Abalo Pelei
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views18 pages

Gpon Omci V2 Voice Configuration Introduction

The document provides information on configuring GPON OMCI V2 for voice services using SIP and H.248 protocols. It describes the necessary OMCI management entities (MEs) for voice configuration including IP host, TCP/UDP, VoIP, RTP profiles, and more. It then gives examples of OLT configuration commands to set up VLANs, QoS, bridging, and IP host settings. Specific SIP configuration such as URI profiles, authentication, and SIP-CONFIG are also shown. Finally, the document outlines the OMCI V2 models for SIP and H.248 call flows.

Uploaded by

Abalo Pelei
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

GPON OMCI V2 VOICE

CONFIGURATION INTRODUCTION
Author&History

• 2014-01-21 Xu Ronghua
• [Link]@[Link]
• GPON OMCI V2 VOICE CONFIGURATION
INTRODUCTION
Test Network
GPON G.984.4 SIP
GPON G.984.4 H.248
GPON G.984.4 voice
 OMCIv2 ME’s
IP Host Config data
TCP/UDP Config data
VoIP Config data
VoIP Voice CTP
VoIP Media profile
RTP Profile data
Voice Service Profile
 PPTP POTS UNI
 SIP User Data
 SIP Agent Config Data
 Network Dial Plan Table
 VoIP Application Service Profile
RTP Performance Monitoring History Data
 Call Control Performance Monitoring History Data
 SIP Call Initiation Performance Monitoring History Data
 SIP Agent Performance Monitoring History Data
GPON OMCI V2 Service Model
GPON OMCI V2 voice configuration
OLT Configuration for data
Add ONT
• configure equipment ont interface 1/1/7/2/3 sernum ALCL:FAAA865E sw-ver-pland
3FE54869ACEB04 voip-allowed iphost
• admin-state up
Create service vlan
• configure vlan id 96 mode residential-bridge in-qos-prof-name name:Default_TC0
• Create BW profile
• configure qos profiles bandwidth 101 excessive-info-rate 10000 assured-info-rate 10000
committed-info-rate 10000 delay-tolerance 5
Create vpls service
• configure service vpls 96 v-vpls vlan 96 customer 1 create no shutdown
• configure service vpls 96 stp shutdown
• configure service vpls 96 sap nt-a:xfp:2:96 create no shutdown
• configure service vpls 96 sap lt:1/1/7:96 create no shutdown
GPON OMCI V2 voice configuration
 Create QoS interface
• configure qos interface 1/1/7/2/3/voip upstream-queue 0 priority 8 weight 20
bandwidth-profile name:101 bandwidth-sharing ont-sharing
• configure qos interface 1/1/7/2/3/voip upstream-queue 1 priority 8 weight 20
bandwidth-profile name:101 bandwidth-sharing ont-sharing
 Create bridge port
• configure bridge port 1/1/7/2/3/voip
• configure bridge port 1/1/7/2/3/voip vlan-id 96 vlan-scope network tag
untagged
• configure bridge port 1/1/7/2/3/voip pvid 96
 Configure IP Host
• configure iphost ont ont:1/1/7/2/3/1 dhcp enabled vlan 96
admin-state up
GPON OMCI V2 voice configuration

 OLT Configuration for SIP service


 XML file by FTP download method with name and password
• configure voice ont uri-prof 10 name uri_10_ftp address
[Link] /[Link]
• configure voice ont auth-sec-prof 10 name auth_sec_10_ftp validation-scheme
md5-digest user-name gpon password gpon realm REALM
• configure voice ont sec-uri-profile 10 name sec_uri_10_ftp auth-securi-
prof 10 uri-prof 10
 Define VOIP protocol and provision method
• configure voice ont voip-config ont:1/1/7/2/3/1 protocol sip conf-method omci
GPON OMCI V2 voice configuration
 Create uri-profile, auth-sec-prof, sec-uri-profile
• configure voice ont uri-prof 40 name uri_40_sipsrv address [Link]
• configure voice ont uri-prof 41 name uri_41_sipsrv address [Link]
• configure voice ont auth-sec-prof 17 name auth_sec_17_sipsrv validation-scheme
md5-digest user-name anonymous password anonymous no realm
• configure voice ont sec-uri-profile 47 name sec_uri_47_sipsrv uri-prof 41
no auth-securi-prof
 ONT SIP-CONFIG
• configure voice ont sip-config ont:1/1/7/2/3/1 proxyserv-prof 41 outproxyserv-prof 40
reg-expire-time 3600 re-reg-head-start 360 aor-host-prt-prof 40 registrar-prof 47 opt-
tx-cntrl disable uri-format sip-uri

 NOTE:
 outproxyserv-prof:It is an optional field, but if you enter a value then all SIP requests
get sent there in the first instance,therefore if you’ve configured outproxyserv-prof not
null , the proxyserv-prof and registrar-prof are useless
 outproxyserv-prof and dns could be covered by iphost ip dhcp if dhcp offer option 6
and 120 (ip or domain name)
GPON OMCI V2 voice configuration
 POTS UNI
 Configure ONT POTS card
• configure equipment ont slot 1/1/7/2/3/2 planned-card-type pots
plndnumdataports 0 plndnumvoiceports 2 admin-state up
 Configure rtp-profile / voice-serv-prof / voip-media-prof / app-serv /
acccode-prof
• configure voice ont rtp-profile 9 name voip_sip local-port-min 5000 local-port-
max 60000 dscp 1 tone-event disabled dtmf-event disabled cas-event
disabled
• configure voice ont voice-serv-prof 6 securi-prof 10 toneset-prof 0 ringingset-
prof 0 announce-type not-applicable jitter-target 0 jitter-max 0 echo-cancel
enabled pstn-variant 0 dtmf-duration 0 hook-flash-min 100 hook-flash-max
300 dtmf-level 0 name voice_sev_profile_6
• configure voice ont voip-media-prof 7 name voipmedia_prof_7
voiceserviceprof 6 rtp-prof 9 fax-mode passthru codec1st pcma pkt-period1st
20 silence1st on outofband-dtmf enabled codec2nd g729 pkt-period2nd 20
silence2nd on
• configure voice ont voip-app-service 7 name voipappserv_prof_7 caller-id-
block disable caller-id-number private caller-id-name private call-waiting
enable call-transfer enable call-hold enable call-park enable call-fwd-indicate
enable mwi-visual-indi enable mwi-spl-dialtone enable
• configure voice ont feat-acccode-prof 2 name access_code_prof_2 park 007
GPON OMCI V2 voice configuration
 Configure SIP POTS Port
• configure voice ont voice-sip-port 1/1/7/2/3/2/1 user-aor +862188881335
user-name privid88881335 display-name 88881335 password newsys
realm [Link] ac-code-prof 2 app-serv-prof 7
• configure voice ont voice-sip-port 1/1/7/2/3/2/2 user-aor +862188881336
user-name privid88881336 display-name 88881336 password newsys realm
[Link] ac-code-prof 2 app-serv-prof 7
• configure voice ont voice-port 1/1/7/2/3/2/1 custinfo 88881335 voipconfig sip
pots-pwr-timer 0 call-hist disable pwr-override false rx-gain 0 tx-gain 0 voip-
media-prof 7 admin-state unlocked
• configure voice ont voice-port 1/1/7/2/3/2/2 custinfo 88881336 voipconfig sip
pots-pwr-timer 0 call-hist disable pwr-override false rx-gain 0 tx-gain 0
voip-media-prof 7 admin-state unlocked
XML file In ONT

 XML file directory in ONT


Check the size and contents of the [Link] in directory
/configs/alcatel/config, whether the right xml be successfully downloaded
from ftp server
OLT Configuration for H.248 service

 Define VOIP protocol and provision method


• configure voice ont voip-config ont:1/1/15/1/52/1 protocol h248
 Define IPhost (fixed)
• configure iphost ont ont:1/1/15/1/52/1 vlan 87 ip-address [Link] (mgi)
net-mask [Link] default-router [Link] dhcp-dscp 63 admin-
state up
 Set mgc-config
• configure voice ont mgc-config 1/1/15/1/52/1 pri-mgcuri-profid 41 sec-
mgcuri-profid 41 protocol-ver 1 msg-format 1 base-termid A max-retry-time
30 max-retries 5 sw-vendor GENB
• ……
OMCI V2 SIP configuration process

Basic call

voice-sip-port voice-port sip-config iphost

voip-app-service ac-code-prof voip-media-prof uri-prof (proxy) sec-uri-prof(register)

voice-serv-prof rtp-profile uri-prof auth-securi-prof

securi-prof

uri-prof(FTP) auth-sec-prof(password)
OMCI V2 H.248 configuration process

Basic call

mgc-config voice-port iphost

Mgc-uri voip-media-prof

voice-serv-prof rtp-profile

securi-prof

uri-prof(FTP) auth-sec-prof(password)

You might also like