KD250
Engine type 6068HFS55-228
Alternator type KH01180T
Performance class G2
GENERAL CHARACTERISTICS
Frequency (Hz) 50
Voltage (V) 400/230
Standard control panel APM303
Optional control panel DEC4000
Optional control panel M80
POWER
ESP PRP
Voltage Standby Amps
kWe kVA kWe kVA
415/240 200 250 182 227 348
400/230 200 250 182 227 361
380/220 200 250 182 227 380
200/115 200 250 182 227 722
240 TRI 200 250 182 227 601
230 TRI 200 250 182 227 628
220 TRI 200 250 182 227 656
DESCRIPTIVE
DIMENSIONS COMPACT VERSION
Kohler Co. Provides one-source responsibility for the
generating system and accessories Length (mm) 2398
The generator set and its components are prototype- Width (mm) 1114
tested, factory-built, and production-tested Height (mm) 1535
A one-year limited warranty covers all systems and
components Dry weight (kg) 1800
Electronic governor Tank capacity (L) 340
Mechanically welded chassis with antivibration
suspension
DIMENSIONS SOUNDPROOFED VERSION
Main line circuit breaker
Commercial reference of the enclosure M226
Radiator for core temperature of 48/50°C max with
mechanical fan Length (mm) 3508
Protective grille for fan and rotating parts (CE option) Width (mm) 1200
9 dB(A) silencer supplied separately
Height (mm) 1830
Charger DC starting battery with electrolyte
Dry weight (kg) 2400
12 V charge alternator and starter
Delivered with oil and coolant -30°C
Tank capacity (L) 340
Manual for use and installation Acoustic pressure level @1m in dB(A) 82
Sound power level guaranteed (Lwa) 101
POWER DEFINITION Acoustic pressure level @7m in dB(A) 71
PRP : Prime Power is available for an unlimited number of annual
operating hours in variable load applications, in accordance with ISO
8528-1. ESP : The standby power rating is applicable for supplying
emergency power in variable load applications in accordance with ISO
8528-1. Overload is not allowed.
TERMS OF USE
According to the standard, the nominal power assigned by the genset is
given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30 % relative humidity. For particular conditions
in your installation, refer to the derating table.
ASSOCIATED UNCERTAINTY
For the generator sets used indoor, where the acoustic pressure levels
depend on the installation conditions, it is not possible to specify the
ambient noise level in the operating and maintenance instructions.
You will also find in our operating and maintenance instructions a
warning concerning the air noise dangers and the need to implement
appropriate preventive measures.
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03026 (KD250) 06/17
KD250
ENGINE CHARACTERISTICS
GENERAL ENGINE DATA EXHAUST
Engine model JOHN DEERE Exhaust gas temperature @ ESP 50Hz (°C) 530
Engine type 6068HFS55-228 Exhaust gas flow @ ESP 50Hz (L/s) 577
Air inlet Turbo Max. exhaust back pressure (mm H2O) 750
Cylinders arrangement L
Number of cylinders 6
FUEL
Displacement (L) 6.72
Consumption @ 110% load (L/h) 51.4
Charge Air coolant Air/Water DC
Consumption @ 100% load (L/h) 47.1
Bore (mm) x Stroke (mm) 106 x 127
Consumption @ 75% load (L/h) 35.9
Compression ratio 17 : 1
Consumption @ 50% load (L/h) 24.4
Speed (RPM) 1500
Maximum fuel pump flow (L/h) -
Pistons speed (m/s) 6.35
Maximum stand-by power at rated
228
RPM (kW) OIL
Frequency regulation, steady state (%) +/- 0.5% Oil capacity (L) 32.5
BMEP (bar) 24.7 Min. oil pressure (bar) -
Governor type Electronic Max. oil pressure (bar) -
Oil consumption 100% load (L/h) -
COOLING SYSTEM Oil sump capacity (L) -
Radiator & Engine capacity (L) 27.7
Max water temperature (°C) - HEAT BALANCE
Outlet water temperature (°C) - Heat rejection to exhaust (kW) 151
Fan power (kW) 3.4 Radiated heat to ambient (kW) 23
Fan air flow w/o restriction (m3/s) 3.8 Heat rejection to coolant (kW) 88
Available restriction on air flow (mm
25
H2O)
Type of coolant Glycol-Ethylene AIR INTAKE
Thermostat modulating range HT (°C) - Max. intake restriction (mm H2O) 375
Intake air flow (L/s) -
EMISSIONS
Emission PM (g/kWh) 0.05
Emission CO (g/kWh) 0.51
Emission HC+NOx (g/kWh) 7.81
Emission HC (mg/Nm3) 5% O2 -
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03026 (KD250) 06/17
KD250
ALTERNATOR CHARACTERISTICS
GENERAL DATA OTHER DATA
Alternator type KH01180T Continuous Nominal Rating 40°C (kVA) 225
Number of Phase Three phase Standby Rating 27°C (kVA) 250
Power factor (Cos Phi) 0.8 Efficiencies 100% of load (%) 93
Altitude (m) 0 to 1000 Air flow (m3/s) 0.533
Overspeed (rpm) 2250 Short circuit ratio (Kcc) 0.45
Number of pole 4 Direct axis synchro reactance unsaturated (Xd) (%) 198.7
Capacity for maintaining short circuit at Quadra axis synchro reactance unsaturated (Xq)
Yes 109.7
3 ln for 10 s (%)
Insulation class H Open circuit time constant (T'do) (ms) 1100
T° class (H/125°), continuous 40°C H / 125°K Direct axis transient reactance saturated (X'd) (%) 10.5
T° class, standby 27°C H / 163°K Short circuit transient time constant (T'd) (ms) 83
AVR Regulation Yes Direct axis subtransient reactance saturated (X''d)
5.6
Total Harmonic Distortion in no-load (%)
2.6
DHT (%) Subtransient time constant (T"d) (ms) 13
Total Harmonic Distortion, on load DHT Quadrature-axis subtransient reactance saturated
2.8 19.1
(%) (X"q) (%)
Wave form : NEMA=TIF <40 Subtransient time constant (T"q) (ms) 23
Wave form : CEI=FHT <2 Zero sequence reactance unsaturated (Xo) (%) 2.69
Number of bearing 1 Negative sequence reactance saturated (X2) (%) 13.2
Coupling Direct Armature time constant (Ta) (ms) 18
Voltage regulation at established rating 1 No load excitation current (io) (A) 0.67
(+/- %)
Recovery time (Delta U = 20% 200 Full load excitation current (ic) (A) 3
transient) (ms) Full load excitation voltage (uc) (V) 47.1
Indication of protection IP 23 Engine start (Delta U = 20% perm. or 50% trans.)
Without collar or 155
Technology (kVA)
brush Transient dip (4/4 load) - PF : 0,8 AR (%) 13.9
No load losses (W) 3100
Heat rejection (W) 13548
Unbalanced load acceptance ratio (%) 100
DIMENSIONS
Dimensions soundproofed version Dimensions DW compact version
Commercial reference of the enclosure M226 Commercial reference of the enclosure -
Length (mm) 3508 Length (mm) 3560
Width (mm) 1200 Width (mm) 1180
Height (mm) 1830 Height (mm) 1890
Dry weight (kg) 2400 %PdnetE_3% 2140
Tank capacity (L) 340 Tank capacity (L) 868
Acoustic pressure level @1m in dB(A) 82 Acoustic pressure level @1m in dB(A) -
Sound power level guaranteed (Lwa) 101 Sound power level guaranteed (Lwa) -
Acoustic pressure level @7m in dB(A) 71 Acoustic pressure level @7m in dB(A) -
Dimensions DW soundproofed version Dimensions DW 48h soundproofed version
Commercial reference of the enclosure M226 DW Commercial reference of the enclosure M226 DW48
Length (mm) 3560 Length (mm) 3560
Width (mm) 1200 Width (mm) 1200
Height (mm) 2182 Height (mm) 2364
Dry weight (kg) 2740 %PdnetE_3% 2800
Tank capacity (L) 868 Tank capacity (L) 1630
Acoustic pressure level @1m in dB(A) 82 Acoustic pressure level @1m in dB(A) 82
Sound power level guaranteed (Lwa) 101 Sound power level guaranteed (Lwa) 101
Acoustic pressure level @7m in dB(A) 71 Acoustic pressure level @7m in dB(A) 71
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03026 (KD250) 06/17
KD250
CONTROL PANEL
APM303, comprehensive and simple DEC4000, ergonomic and user-friendly
The APM303 is a versatile unit which can be operated in The highly versatile DEC4000 control unit is complex yet
manual or automatic mode. Equipped with an LCD screen, accessible, thanks to the particular attention paid to
the user-friendly APM303 offers high-quality basic functions optimising its ergonomics and ease of use. With its large
to guarantee simple, reliable operation and supervision of display screen, buttons and scroll wheel, it places the
your generating set. It offers the following features: accent on simplicity and communication.
Measurements:
phase-to-neutral and phase-to-phase voltages, active power It offers the following functions:
currents, effective power, power factors, Kw/h energy meter
Fuel, oil pressure and coolant temperature levels Electrical measurements: voltmeter, frequency meter,
Supervision: ammeter.
Modbus RTU communication on RS485
Reports: Engine parameters: working hours counter, oil pressure,
2 configurable reports coolant temperature, fuel level, engine speed, battery
Safety features: voltage.
Overspeed, oil pressure
Coolant temperatures Alarms and faults: oil pressure, coolant temperature, failure
Minimum and maximum voltage to start, overspeed, alternator min./max., battery voltage
Minimum and maximum frequency min./max., emergency stop, fuel level.
Maximum current
Maximum active power Ergonomics: wheel for navigating around the various
Phase sequence menus.
Traceability:
Stack of 12 stored events Communication: remote control and operation software,
For further information, please refer to the data sheet for the USB connections, PC connection.
APM303.
Automatic control: automatic start.
For more information on the product and its options, please
refer to the sales documentation.
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03026 (KD250) 06/17
KD250
CONTROL PANEL
M80, transfer of information Basic terminal block
The M80 is a dual-function control unit. It can be used as a
basic terminal block for connecting a control box and as an
instrument panel with a direct read facility, with displays The control unit can be used as a basic terminal block for
giving a global view of your generating set's basic connecting a control box.
parameters.
Offers the following functions:
Offers the following functions:
emergency stop button, customer connection terminal
Engine parameters: tachometer, working hours counter, block, CE.
coolant temperature indicator, oil pressure indicator,
emergency stop button, customer connection terminal
block, CE.
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03026 (KD250) 06/17
