Scribd
Upload
112 views1 page

Camco JU Series Pulling Tools Guide

This document provides specifications for Camco JU series pulling tools used in wireline operations. It lists various sizes of pulling tools from 1 1/4" to 4" with details on maximum OD, neck OD, reach, minimum working ID, connecting thread types, fishing neck OD, associated pulling tool, and length. Pulling tools are used to retrieve tools that have been run downhole during wireline operations.

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views1 page

Camco JU Series Pulling Tools Guide

This document provides specifications for Camco JU series pulling tools used in wireline operations. It lists various sizes of pulling tools from 1 1/4" to 4" with details on maximum OD, neck OD, reach, minimum working ID, connecting thread types, fishing neck OD, associated pulling tool, and length. Pulling tools are used to retrieve tools that have been run downhole during wireline operations.

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Wireline Operations - Pulling Tools

Camco - JU Series Pulling Tool

Down Hole Tools


Engineering Data
Pulls Minimum Prong Fishing
Maximum Neck Working Connecting Connecting Neck
Nominal Assembly O.D. O.D. Reach* I.D. Thread Thread O.D. Pulling Length
Size Type Number (in.) (in.) (in.) (in.) (Pin) (Box) (in.) Tool** (in.)
1 1/4 JUC 15175 1.250 0.875 1.937 1.281 15/16" - 10 1/4" - 20 1.187 15166 13.000
1 1/2 JUC 15174 1.422 1.187 1.093 1.500 15/16" - 10 1/2" - 13 1.187 15166 13.00
1 1/2 JUS 15194 1.422 1.187 1.843 1.500 15/16" - 10 1/2" - 13 1.187 15166 13.00
1 1/2 JUS-2 15989 1.422 1.187 1.843 1.500 1 1/16" - 10 1/2" - 13 1.197 15166 13.00
2 JUC-TD 15185 1.760 1.375 1.437 1.875 15/16" - 10 1.2" - 13 1.375 15168 14.500
2 JUC 15176 1.859 1.375 1.437 1.875 15/16" - 10 1/2" - 13 1.375 15168 14.500
2 JUC-U 15177 1.780 1.375 1.473 1.875 15/16" - 10 1/2" - 13 1.375 15168 14.500
2 JUC-2 15999 5.750 1.375 1.437 N/A 1 1/16" - 10 1/2" -13 1.375 15168 19.093
2 JUS 15196 1.859 1.375 2.125 1.875 15/16" - 10 1/2" - 13 1.375 15168 14.500
2 JUS-2 15991 1.859 1.375 2.125 1.875 1 1/6" - 10 1/2" - 13 1.375 15168 14.500
2 JUL 15186 1.859 1.375 2.968 1.875 15/16" - 10 1/2" -13 1.375 15168 14.500
2 1/2 JUC 15178 2.250 1.750 1.312 2.265 15/16" - 10 1/2" - 13 1.375 15168 14.765
2 1/2 JUC-TD 15189 2.180 1.750 1.312 2.265 15/16" - 10 1/2" - 13 1.375 15168 15.750
2 1/2 JUS 15198 2.250 1.750 2.187 2.265 15/16" - 10 1/2" - 13 1.375 15168 14.765
2 1/2 JUS-2 15993 2.250 1.750 2.187 2.265 1 1/16" - 10 1/2" - 13 1.375 15168 15.750
3 JUC 15180 2.812 2.312 1.437 2.843 15/16" - 10 5/8" - 11 1.750 15170 14.937

Wireline Operations - Pulling Tools


3 JUC-TD 15191 2.740 2.312 1.437 2.843 15/16" - 10 5/8" - 11 1.750 15170 15.812
3 JUS 15200 2.812 2.312 2.125 2.843 15/16" - 10 5/8" - 11 1.750 15170 14.937
3 JUS-2 15995 2.812 2.312 2.125 2.843 1 1/16" - 10 5/8" - 11 1.750 15170 14.937
4 JUC 15182 3.750 3.123 3.375 3.765 1 1/16' - 10 1 1/4" -12 2.312 15172 19.140
4 JUC-2 15997 3.750 3.125 3.375 3.765 1 9/16" - 10 1 1/4 - 12 2.312 15172 19.140

* Reach is the distance from the core to the engaging shoulder of the dogs.
** For retrieval of JU series running tools

Next Item:
Camco
PRS Series Pulling Tool

Section Menu Rev 0 [11.02]


Camco Last Item

You might also like