Scribd
Upload
85 views5 pages

C-12 FND-3RD Design Parameters Summary

This document provides design parameters and load combinations for column C-12. It specifies the concrete strength, rebar properties, section geometry as rectangular with dimensions 1000x1000mm, and reinforced with 28 #11 rebars. It also lists the calculated section properties and 63 load combinations with axial load and moments applied to the column. The load combinations are checked against the column's capacity and found to be acceptable in all cases.

Uploaded by

Bert Niebres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views5 pages

C-12 FND-3RD Design Parameters Summary

This document provides design parameters and load combinations for column C-12. It specifies the concrete strength, rebar properties, section geometry as rectangular with dimensions 1000x1000mm, and reinforced with 28 #11 rebars. It also lists the calculated section properties and 63 load combinations with axial load and moments applied to the column. The load combinations are checked against the column's capacity and found to be acceptable in all cases.

Uploaded by

Bert Niebres
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Column:C-12 FND-3RD

Basic Design Parameters

Caption = C-12 FND-


3RD
Default Concrete Strength, Fc = 48.3 N/mm^2
Default Concrete Modulus, Ec = 32652.0 N/mm^2
Maximum Concrete Strain = 0.003 in/in

Rebar Set = ASTM


Default Rebar Yeild Strength, Fy = 414.0 N/mm^2
Default Rebar Modulus, Es = 200000.0 N/mm^2
Default Cover to Rebars = 56.0 mm
Maximum Steel Strain = Infinity

Transverse Rebar Type = Ties

Total Shapes in Section =1


Consider Slenderness = No

Section Diagram

Cross-section Shapes

Shape Width Height Conc Fc S/S Curve Rebars


mm mm N/mm^2

E:\Work in Progress_18 Oct 2018\Quadstruct Files\Scandi\CSI Files\to sir bert_9-21-20\FOR COLUMN AND SHEAR WALL
CALCS\COLUMN\[Link] Page 1
Rectangular 1000.0 1000.0 48.3 ACI-Whitney Rectangular 28-#11
Shape

Basic Section Properties:

Total Width = 1,000.0 mm


Total Height = 1,000.0 mm
Center, Xo = 0.0 mm
Center, Yo = 0.0 mm

X-bar (Right) = 500.0 mm


X-bar (Left) = 500.0 mm
Y-bar (Top) = 500.0 mm
Y-bar (Bot) = 500.0 mm

Transformed Properties:
Base Material = Custom
Area, A = 1.00E+06 mm^2
Inertia, I33 = 8.33E+10 mm^4
Inertia, I22 = 8.33E+10 mm^4
Inertia, I32 = 0.00E+00 mm^4

Radius, r3 = 288.68 mm
Radius, r2 = 288.68 mm

Additional Section Properties:

Transformed Properties:
Base Material = Custom
Modulus, S3(Top) = 1.67E+08 mm^3
Modulus, S3(Bot) = 1.67E+08 mm^3
Modulus, S2(Left) = 1.67E+08 mm^3
Modulus, S2(Right) = 1.67E+08 mm^3

Plastic Modulus, Z3 = 3.07E+08 mm^3


Plastic Modulus, Z2 = 3.07E+08 mm^3
Torsional, J = 1.45E+11 mm^4
Shear Area, A3 = 8.74E+05 mm^2
Shear Area, A2 = 8.74E+05 mm^2

Principal Angle = 0.00E+00 Deg


Inertia, I33' = 8.33E+10 mm^4
Inertia, I22' = 8.33E+10 mm^4

Final Design Loads

[Link] Combination Load Pu Mux-Bot Muy-Bot Mux-Top Muy-Top


kN kN-m kN-m kN-m kN-m
1 1 7,926.7 -4.8 158.4 0.0 0.0
2 2 7,892.7 -3.1 70.7 0.0 0.0
3 3 7,858.8 -1.4 -17.1 0.0 0.0
4 4 7,926.7 -4.8 158.4 0.0 0.0
5 5 7,892.7 -3.1 70.7 0.0 0.0
6 6 7,858.8 -1.4 -17.1 0.0 0.0
7 7 2,933.7 230.6 397.0 0.0 0.0
8 8 2,893.6 385.4 203.9 0.0 0.0
9 9 2,853.4 561.7 124.6 0.0 0.0
10 10 1.32E+04 -2.39E+02 -1.43E+02 0.00E+00 0.00E+00
11 11 1.32E+04 -3.93E+02 -7.61E+01 0.00E+00 0.00E+00
12 12 1.31E+04 -5.69E+02 -1.23E+02 0.00E+00 0.00E+00
13 13 3,273.8 137.4 647.5 0.0 0.0

E:\Work in Progress_18 Oct 2018\Quadstruct Files\Scandi\CSI Files\to sir bert_9-21-20\FOR COLUMN AND SHEAR WALL
CALCS\COLUMN\[Link] Page 2
14 14 3,233.6 213.7 389.8 0.0 0.0
15 15 3,193.5 296.3 173.2 0.0 0.0
16 16 1.29E+04 -1.46E+02 -3.93E+02 0.00E+00 0.00E+00
17 17 1.28E+04 -2.22E+02 -2.62E+02 0.00E+00 0.00E+00
18 18 1.28E+04 -3.04E+02 -1.72E+02 0.00E+00 0.00E+00
19 19 -1,498.3 233.1 320.4 0.0 0.0
20 20 -1,517.6 387.4 167.2 0.0 0.0
21 21 -1,536.8 563.2 127.9 0.0 0.0
22 22 8,782.6 -236.8 -219.2 0.0 0.0
23 23 8,763.3 -391.4 -112.8 0.0 0.0
24 24 8,744.1 -567.5 -120.2 0.0 0.0
25 25 -1,158.3 139.9 570.8 0.0 0.0
26 26 -1,177.5 215.7 353.1 0.0 0.0
27 27 -1,196.7 297.9 176.5 0.0 0.0
28 28 8,442.5 -143.6 -469.7 0.0 0.0
29 29 8,423.3 -219.7 -298.7 0.0 0.0
30 30 8,404.1 -302.1 -168.8 0.0 0.0
31 31 6,870.2 -25.0 34.3 0.0 0.0
32 32 6,819.3 -17.5 1.4 0.0 0.0
33 33 6,768.4 -10.0 -31.5 0.0 0.0
34 34 6,870.2 -25.0 34.3 0.0 0.0
35 35 6,819.3 -17.5 1.4 0.0 0.0
36 36 6,768.4 -10.0 -31.5 0.0 0.0
37 37 1,339.3 1,229.3 475.4 0.0 0.0
38 38 1,279.0 251.5 137.8 0.0 0.0
39 39 1,218.8 724.9 256.4 0.0 0.0
40 40 1.26E+04 -1.28E+03 -4.67E+02 0.00E+00 0.00E+00
41 41 1.26E+04 -2.82E+02 -1.40E+02 0.00E+00 0.00E+00
42 42 1.25E+04 -7.33E+02 -2.70E+02 0.00E+00 0.00E+00
43 43 2,429.4 578.0 744.1 0.0 0.0
44 44 2,369.2 108.7 287.0 0.0 0.0
45 45 2,308.9 355.0 201.8 0.0 0.0
46 46 1.15E+04 -6.31E+02 -7.35E+02 0.00E+00 0.00E+00
47 47 1.15E+04 -1.39E+02 -2.90E+02 0.00E+00 0.00E+00
48 48 1.14E+04 -3.63E+02 -2.16E+02 0.00E+00 0.00E+00
49 49 -2,495.7 1,243.7 466.9 0.0 0.0
50 50 -2,524.5 260.4 138.0 0.0 0.0
51 51 -2,553.3 728.4 265.2 0.0 0.0
52 52 8,785.1 -1,268.2 -475.1 0.0 0.0
53 53 8,756.2 -273.3 -140.2 0.0 0.0
54 54 8,727.4 -729.6 -261.4 0.0 0.0
55 55 -1,405.5 592.4 735.6 0.0 0.0
56 56 -1,434.4 117.7 287.2 0.0 0.0
57 57 -1,463.2 358.4 210.6 0.0 0.0
58 58 7,694.9 -616.9 -743.8 0.0 0.0
59 59 7,666.1 -130.5 -289.4 0.0 0.0
60 60 7,637.3 -359.6 -206.8 0.0 0.0

Result Summary

[Link] Combination Pu (kN) Cap. Ratio-Bot Cap. Ratio- Remarks


Top
1 1 7,926.7 0.296 0.296 Capacity OK
2 2 7,892.7 0.294 0.294 Capacity OK
3 3 7,858.8 0.293 0.293 Capacity OK
4 4 7,926.7 0.296 0.296 Capacity OK
5 5 7,892.7 0.294 0.294 Capacity OK
6 6 7,858.8 0.293 0.293 Capacity OK
7 7 2,933.7 0.13 0.109 Capacity OK
8 8 2,893.6 0.126 0.108 Capacity OK
9 9 2,853.4 0.139 0.106 Capacity OK
10 10 1.32E+04 0.493 0.493 Capacity OK
11 11 1.32E+04 0.491 0.491 Capacity OK
12 12 1.31E+04 0.49 0.49 Capacity OK
13 13 3,273.8 0.16 0.122 Capacity OK
14 14 3,233.6 0.136 0.121 Capacity OK
15 15 3,193.5 0.124 0.119 Capacity OK
16 16 1.29E+04 0.48 0.48 Capacity OK
17 17 1.28E+04 0.479 0.479 Capacity OK
18 18 1.28E+04 0.477 0.477 Capacity OK
19 19 -1,498.3 0.211 0.143 Capacity OK

E:\Work in Progress_18 Oct 2018\Quadstruct Files\Scandi\CSI Files\to sir bert_9-21-20\FOR COLUMN AND SHEAR WALL
CALCS\COLUMN\[Link] Page 3
20 20 -1,517.6 0.227 0.145 Capacity OK
21 21 -1,536.8 0.251 0.146 Capacity OK
22 22 8,782.6 0.328 0.328 Capacity OK
23 23 8,763.3 0.327 0.327 Capacity OK
24 24 8,744.1 0.326 0.326 Capacity OK
25 25 -1,158.3 0.228 0.11 Capacity OK
26 26 -1,177.5 0.187 0.112 Capacity OK
27 27 -1,196.7 0.176 0.114 Capacity OK
28 28 8,442.5 0.315 0.315 Capacity OK
29 29 8,423.3 0.314 0.314 Capacity OK
30 30 8,404.1 0.313 0.313 Capacity OK
31 31 6,870.2 0.256 0.256 Capacity OK
32 32 6,819.3 0.254 0.254 Capacity OK
33 33 6,768.4 0.252 0.252 Capacity OK
34 34 6,870.2 0.256 0.256 Capacity OK
35 35 6,819.3 0.254 0.254 Capacity OK
36 36 6,768.4 0.252 0.252 Capacity OK
37 37 1,339.3 0.339 0.05 Capacity OK
38 38 1,279.0 0.078 0.048 Capacity OK
39 39 1,218.8 0.197 0.045 Capacity OK
40 40 1.26E+04 0.489 0.471 Capacity OK
41 41 1.26E+04 0.468 0.468 Capacity OK
42 42 1.25E+04 0.466 0.466 Capacity OK
43 43 2,429.4 0.245 0.091 Capacity OK
44 44 2,369.2 0.097 0.088 Capacity OK
45 45 2,308.9 0.108 0.086 Capacity OK
46 46 1.15E+04 0.43 0.43 Capacity OK
47 47 1.15E+04 0.428 0.428 Capacity OK
48 48 1.14E+04 0.426 0.426 Capacity OK
49 49 -2,495.7 0.484 0.238 Capacity OK
50 50 -2,524.5 0.288 0.241 Capacity OK
51 51 -2,553.3 0.38 0.243 Capacity OK
52 52 8,785.1 0.384 0.328 Capacity OK
53 53 8,756.2 0.327 0.327 Capacity OK
54 54 8,727.4 0.326 0.326 Capacity OK
55 55 -1,405.5 0.331 0.134 Capacity OK
56 56 -1,434.4 0.192 0.137 Capacity OK
57 57 -1,463.2 0.213 0.139 Capacity OK
58 58 7,694.9 0.314 0.287 Capacity OK
59 59 7,666.1 0.286 0.286 Capacity OK
60 60 7,637.3 0.285 0.285 Capacity OK

E:\Work in Progress_18 Oct 2018\Quadstruct Files\Scandi\CSI Files\to sir bert_9-21-20\FOR COLUMN AND SHEAR WALL
CALCS\COLUMN\[Link] Page 4
E:\Work in Progress_18 Oct 2018\Quadstruct Files\Scandi\CSI Files\to sir bert_9-21-20\FOR COLUMN AND SHEAR WALL
CALCS\COLUMN\[Link] Page 5

You might also like