MCQS ON UNIT 1 & 2
UNIT 1
Multiple Choice Questions
1.The IEEE 802.11a, has a data rate of _______Mbps.
a)11
b)22
c)54
d)1
2.In IEEE 802.11, the access method used in the PCF sublayer is .
a)polling
b)controlled
c)contention
d)none of the above
3.In IEEE 802.11, a BSS without an AP is called an .
a)an infrastructure network
b)an ad hoc architecture
c)either (a) or (b)
d)neither (a) nor (b)
4.In IEEE 802.11, the addressing mechanism can include up to _________addresses.
a)six
b)five
c)four
d)none of the above
5.In Bluetooth, the _________ layer is roughly equivalent to the physical layer of the Internet model.
a)baseband
b)radio
c)L2CAP
d)none of the above
6.In IEEE 802.11, a station with_________ mobility can move from one BSS to another.
a)ESS-transition
b)no-transition
c)BSS-transition
d)none of the above
7.In Bluetooth, the sublayer, that is roughly equivalent to the LLC sublayer in LANs.
a)baseband
B) L2CAP
c)radio
d)none of the above
8.In IEEE 802.11, when a frame is going from one AP to another AP in a wireless distribution system, the address flag is .
a)10
b)01
c)11
d)00
9.In IEEE 802.11, a BSS with an AP is sometimes referred to as .
a)an infrastructure network
b)an ad hoc architecture
c)either (a) or (b)
d)neither (a) nor (b)
10.In IEEE 802.11, the ____________is a timer used for collision avoidance.
a)BSS
b)ESS
c)NAV
d)none of the above
.
Fill in the Blanks
1.In IEEE 802.11, the two network architectures used are _________ and ___________ .
2.The RTS and CTS frames in CSMA/CA_________solve the hidden station problem. The RTS and CTS frames in CSMA/CA __________ solve
the exposed station problem.
3.Two types of transmission technologies used by WLAN products are ________________ and ______________ .
4.Bluetooth is a_________technology that connects devices (called gadgets) in a small area.
5.The access method in Bluetooth is ________ .
6.The IEEE 802.11 wireless LANs use _______types of frames.
7.In IEEE 802.11, __________ is an optional access method that can be implemented in an infrastructure network (not in an ad hoc
network).
8.In IEEE 802.11, when a frame is coming from an AP and going to a station, the address flag is ______ .
9.In Bluetooth, multiple _______ form a network called a _________.
UNIT 2
Multiple Choice Questions
1. Which protocol support mobility portability of equipment.
a)TCP
b)UCP
c)DHCP
d)LDAP
2. Which protocol map a logical name TO it IP address?
a)SMTP
b)TCP
c)DNS
d)DHCP
3. Which component continuously communicates with any other system in internet as long as data link layer is persistent?
a)home network
b)mobile node
c)foreign node
d)correspondent
4. _________ is the mechanism of taking a packet consisting of packet header and data and putting it into the data part of a new packet.
a)tunelling
b)Encapsulation
c)Decapsilation
d)none of the above
5. _______ is an end-system or router that can change its point of attachment to the internet using mobile IP.
a)mobile node
b)Correspondent node
c)foreign node
d)none of above.
6. ________ is the subnet the MN belongs to with respect to its IP address.
a)home network
b)Correspondent network
c)foreign network
d)none of above.
7. The ______defines the current location of the MN from an IP point of view
a)care of network
b)care of address
c)correspondent address
d)none of the above
8. The ____provides several services for the MN and is located in the home network.
a)home node
b)foreign address
c)home address
d)none of the above
9. Foreign agents and home agents advertise their presence periodically using special
________ messages.
a)foreign agent advertisement
b)agent advertisement
c)home agent advertisement
d)none of the above
10. _______ allows the encapsulation of packets of one protocol suite into the payload portion of a packet of another protocol suite
a)Generic routing encapsulation (GRE)
b)IP-in-IP encapsulation
c)Minimal encapsulation
d)none of the above
Fill in the Blanks
1.The ______________ is the subnet the MN belongs to with respect to its IP address.
2.The ______________ is the current subnet the MN visits
3.The COA defines the current location of the _____________ from an IP point of view.
4.The agent advertisement messages can be seen as a __________ into the subnet.
5.The home address is the _________ IP address of the MN, home agent is the IP address of the HA
6. _________is the mechanism of taking a packet consisting of packet header and data and putting it into the data part of a new packet.
7.A _______________ represents the current position of the Mobile Node on the foreign network and can be used by only one Mobile
Node at a time.
8.DHCP is based on a _____________
9.DSDV now adds two things _______ and ______ to the distance vector algorithm
THANKYOU
