E1 Quick Manual
13
1
2 12
2
3 3
11
1
4 10
9
5 6 7 8
14
1. Exam Angle / Zoom / Left & Right Set 10. Automatic
Procedure Depth / Focus Buttons / Caliper / Parameter
Calculation Optimization and
Patient / Probe / 4. User Defined
Gain Adjustment
Report / Review / Keys 7. Imaging Mode
End Exam 11. Dual Mode
P1/ P2 B / PW / M
2. Standard 12. TGC
5. Annotation 8. Image
Keyboard and
Management 13. Parameter
Function Keys Body mark / Pointer
Knobs
/ Annotation / Clear Print / Cine / Image
3. Parameter
14. Power On
Adjustment 6. Control Center 9. Freeze/
Trackball / Update / Unfreeze
Baseline / Scale /
Based on Software Version [Link]
Please Refer to Basic & Advanced User Manual for More Information
HDMI
USB
Probe Ports HeadPhone
MIC
ECG Print
S-Video
Foot Switch
Ethernet
Grounded Cable
Video Power
1. Getting Start
Create new patient and get into the 2. A patient ID is necessary and will be
Scanning Mode assigned if left empty;
1. Press [Patient], to create a new patient 3. Press [Probe] and move the [Trackball] to
with basic patient and exam information; choose a probe and an appropriate exam.
2. Scanning
B Mode optimization.
1. The default scanning mode is B mode; if 2B/4B Imaging
you want to return to B mode while you are
1. Press [Dual] or [Quad] to get into 2B/4B
operating other modes, please press the [B]
imaging;
on keyboard;
2. Press [Dual] or [Quad] to change the
2. Easily adjust parameters with the six
activated image.
knobs just under the monitor, press the right
button for the next page of parameters. 3. Easily adjust parameters with the six
knobs just under the monitor, press the right
3. Press [Auto] for one key image
Based on Software Version [Link]
Please Refer to Basic & Advanced User Manual for More Information
button for the next page of parameters. 5. Easily adjust parameters with the six
knobs just under the monitor, press the right
PW Mode
button for the next page of parameters.
1. Press [PW] to enter PW mode;
Image Adjustments
2. Move the [Trackball] to change the
Parameters in B Mode: Depth, Focus, Gain,
position of the sample volume;
Frequency, Line Density, Gray Map,
3. Press [Set] and then move the [Trackball] Chroma, μ-Scan, Persist, DR, Power, Focus
to change the size of the sample volume, Area, Sector Width, Compound, Rotation,
and rotate [Angle] to change the angle of the TSI;
sample volume line;
Parameters in Color Mode: Gain, Baseline,
4. Press [Update] to activate the Pulse Wave Scale, Depth, Frequency, Line Density,
Doppler image; Rotation, Persist, WF, Invert, Power.
3. Measurements, Annotations and Body Marks
Measurements, annotations and body marks dictionary, select from the annotations
are active both in scanning mode and in dictionary or input the annotation through the
frozen mode; keyboard.
Measurements 2. Move the [Trackball] to change the
position of the annotation.
1. Press [Caliper] to calculate the distance,
area, volume and angle; 3. Press [Set] to place the annotation at the
desired position.
2. Press [Calc] to enter the application
measurements menu; Body Marks
3. Choose the desired measurement item by 1. Press [Body Mark] and choose the
moving the [trackball], use [Set] to choose desired body mark.
and mark the correct position.
2. Move the [Trackball] to place the probe
4. Press [Clear] to clear all marks on the marker, and rotate [Body Mark] to adjust the
image. orientation of the probe marker.
Annotations 3. Press [Set] to place body mark at the
desired position.
1. Press [Annot] to activate the annotations
Based on Software Version [Link]
Please Refer to Basic & Advanced User Manual for More Information
4. Post Scanning
Save Images and Cine for reviewing all measurement results and
edit graphs.
Press [Image] to save a single frame image,
or press [Cine] to save a cine on the system. 2. Click [Image View] to add images, Click
[Summary] to input a summary for the exam;
Review Patient File
3. Click [[Link]] to preview the report
Press [Review] to review the patient file that
and then click [Print] to print the report.
is currently active, then select a certain
exam to review images and cines. End Exam Press [End Exam] to end the
examination.
Report and Print
Start a New Patient by repeating the
1. Press [Report] to enter the report interface
instructions above
5. Image Management
1. Press [Patient] in the control panel, then JPG/BMP/AVI/WMV/PDF;
enter the [Patient List] to open an exam of
3. Click [Export] to send the images to the
the desired patient; or press [Review] and
selected USB.
choose the desired patient.
4. Click [DICOM Send] to upload files to
2. Choose the type of medium, then choose
DICOM service.
the type of file you want to export, like
6. User-defined Presets
1. After you change some parameters to [Save];
optimize the scanning image, press “S” on
3. You can also enter [Setup] - [Exam Preset]
the alphabet keyboard to enter the User
to change the order of all exam modes.
Preset Menu;
2. Name the new exam, and choose the
Exam Type and Part accordingly; then click
Based on Software Version [Link]
Please Refer to Basic & Advanced User Manual for More Information
