150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps

150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide

1.Package Contents 3.Typical Applications (3)WISP Mode 4.Router Configurations

(1)AP Router Mode(Default mode) The WF2416 is connected wirelessly to an ISP's Wi-Fi Station, acting Step 1 Connecting your computer to WF2416 wirelessly.
as a gateway and sharing the Internet access to multiple devices.
The WF2416 can be connected to a DSL or cable modem and works Please click on the “Wireless Network Connection” icon (for Windows)
as a regular wireless router. or “Airport/Wi-Fi” icon (for MAC OS) on the task bar/menu bar.
netis 150Mbps WirelessN PortableRouter
Quick InstallationGuide

Double click on “netis” and click on “Connect” button, then type in

“password” as the wireless security key.
WF2416 Ethernet Cable Quick Installation Guide

2.Hardware Information WISP signal

Modem

WPS Default

WF2416

netis 150Mbps Wireless N Portable Router Extender Router LAN/WAN

Quick Installation Guide Note: Different power plug is provided for different region. Here we take US
WF2416

version for example.

(2)AP Mode
LED Status Indication The WF2416 is connected to a network by wired and transforms
(4)Wi-Fi Extender Mode Windows OS
Solid on System is running. the wired network into wireless so that multiple wireless devices
can share the network . (Charged)
Flashing Data is transmitting. Or WPS is pairing with The WF2416 copies and boosts the root wireless signal to extend the
remote device. coverage of the signal. Wired Network AirPort: On
Auto etho
Off Power is off. Turn AirPort Off
Disconnect
Wireless Networks
disconnected netis
Available Other...
Hardware Description Router netis
This switch is for changing the operation mode of More networks... Create Network ...
Extender Router switch Root Router
WF2416. VPN Connections
It is LAN port in AP, WISP, Wi-Fi Extender mode, while Use Interference Robustness
LAN/WAN port Connect to Hidden Wireless Network ...
it is WAN port in AP Router mode. Create New Wireless Network ...
WPS is for quick wireless security setup and also for Open Internet Connect...
WPS button
extending existing wireless range with one click.
This button is for resetting the router to factory
Default button Linux Mac OS
defaults.
Step 2 Login to the router.
WF2416 Open a web browser and type in http://192.168.100.1 .
Model No. WF2416 WF2416
http://192.168.100.1
3
1 2 4

150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide 150Mbps Wireless N Portable Router Quick Installation Guide
Appendix : FCC Statement
● Wireless settings 5.Extender Configurations This equipment has been tested and found to comply with the limits for a Class B
Step 3 Configure the router. Troubleshooting
Note:Please make sure that the WPS feature is Enabled on your main router. If the main router digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
Select the Operation Mode you need from the pull-down menu. Setup a wireless network name in “SSID” box, it is recommended to use is unsecured, router's WPS feature will generate a random SSID & Password automatically. Q: How do I restore my netis WF2416 to default settings? provide reasonable protection against harmful interference in a residential
For this case, please contact the technician of your main router for help.
WPA-PSK/WPA2-PSK for “Security” and set a wireless network key in the A With the router powered on, holding “Default” button for 8s~10s installation. This equipment generates uses and can radiate radio frequency energy
Internet Connection “Password” box, then click “Save” button. Step 1 Plug in the WF2416. with a pin to restore it to factory defaults. and, if not installed and used in accordance with the instructions, may cause harmful
AP Step 2 Press the “WPS” button on your existing router. Please refer to the interference to radio communications. However, there is no guarantee that
Operation Mode: AP Router instructions of the existing router for detailed way to use the WPS button. interference will not occur in a particular installation. If this equipment does cause
WISP Wiress Setup Step 3 Press the “WPS” button on WF2416 for 1s and wait for 1 minute Q: What can I do if fails to extend the wireless range by “WPS”button? harmful interference to radio or television reception, which can be determined by
SSID: netis and check if the signal strength of your wireless network got boosted or not. A: turning the equipment off and on, the user is encouraged to tr y to correct the
1) Refer to “Tip1” to set a Static IP address for your PC and connect the interference by one or more of the following measures:
Note: The configuration includes “Internet settings” and “Wireless settings” , Wiress Security:
Note: If you need to do advanced settings, please refer to “Tip 1” to set a static IP for your PC first and —Reorient or relocate the receiving antenna.
if you choose “AP”, please go to Wireless Settings directly.
refer to “Router Configurations”>“Step1 & Step2” to login to the web-based management page.
WF2416 to your PC.
None WPA -PSK/WPA2-PSK —Increase the separation between the equipment and receiver.
Password:
Password
2) Open a web browser and login to http://192.168.100.1 —Connect the equipment into an outlet on a circuit different from that to which the
● Internet settings Tip 1 : Setup a Static IP for PC 3) Click “AP Scan” button to select the existing router and click receiver is connected.
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))

Manually set the IP address of the wired network adapter on your “Connect” button. Type in the wireless security info of the existing —Consult the dealer or an experienced radio/TV technician for help.
AP Router Mode :
Save computer as below.
Select the correct Connection Type. router.
IP Address/ IPv4 Address: 192.168.100.x (1<x<255) FCC Radiation Exposure Statement
PPPoE Select “PPPoE” when： 4) Under “Wireless Setup”, you may setup a wireless network name in This device complies with FCC radiation exposure limits set forth for an uncontrolled
Type in the Username 1. WF2416 is connected to a DSL pure modem. Subnet Mask : 255.255.255.0
Note: The DHCP Ser ver will be disabled after switching to “AP” mode successfully, so you “SSID” box, it is recommended to use WPA-PSK/WPA2-PSK for environment and it also complies with Part 15 of the FCC RF Rules. This transmitter
& Password provided 2. Got username & password from ISP. will have to set a static IP address for your PC first if you need to login to the web-based Default Gateway/ Router : 192.168.100.1
by the ISP. 3. Broadband connection is needed on PC when bypassing “Security” and set a wireless network key in the “Password” box, must not be co-located or operating in conjunction with any other antenna or
management page again. Please refer to “ Tip 1” for how to setup a static IP for PC.
WF2416. then click “Save” button. transmitter.
For Windows 8/ 7/Vista This equipment should be installed and operated with a minimum distance of
DHCP Select “DHCP” when:
(Dynamic IP) 1. WF2416 is connected to a cable modem/DSL modem 1)Go to "Settings” (for Windows 8)/“Start” (for Windows 7/Vista) > 20 centimeters between the radiator and your body.
router. Step 4 Connect your wireless devices to WF2416 to get Internet Access. "Control Panel". WIFI Extender Settings
2. Internet works directly on PC when bypassing WF2416. 2)Left-click on“Network and Internet” >“Network and Sharing Center ” This device complies with Part 15 of the FCC Rules. Operation is subject to the
For example, on Windows 7, click on the Wireless Network Connection icon
Static IP Select “Static IP” when: >“Change adapter settings” (for Windows 8/ 7)/”Manage network Internet Repreater SSID: AP Scan following two conditions:
and select the name you set for WF2416 and type in the password you created. (1) this device may not cause harmful interference, and (2)
Type in all the IP Info. 1. Got IP Address, Subnet Mask, Default Gateway, connections” (for Windows Vista). Security WPA2-PSK
DNS Server from ISP. this device must accept any interference received, including interference that may
3)Right-click on“Local Area Connection” and left-click on“Properties”. Encr yption Type: TKIP AES
cause undesired operation.
4)Double-click on“Internet Protocol Version 4 (TCP/IPv4)”. Key Mode: HEX ASCⅡ
5)Select "Use the following IP address" then left-click on“OK”. Key:
Caution!
WISP Mode :
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
Select target network and Connection Type. Any changes or modifications not expressly approved by the party responsible for
1. Click “AP Scan” button to select your target network and click “Connect” For Windows XP/2000 Key Renewal: 86400 seconds(60-86400) compliance could void the user's authority to operate the equipment.
button. 1)Go to "Start" > "Control Panel".
2. Type in the wireless security info of the target network. 2)Left-click on“Network and Internet Connections” >“Network Wiress Setup
3. Select connection type. (Please refer to “Internet Settings” à ”AP Router Connections”. SSID: netis
Mode”)
3)Right-click on“Local Area Connection” and left-click on“Properties”. Wiress Security:
Technical Support:
Internet Connection
4)Double-click on“Internet Protocol (TCP/IP)”. None WPA -PSK/WPA2-PSK
USA/ Canada
Password: Password
Internet Operation Mode: WISP 5)Select "Use the following IP address" then left-click on“OK”. (please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9)) Toll Free: +1 866 71 network (+1 866 716 3896)
Save
E-mail: [email protected]
SSID: netis AP Scan
For MAC OS
Security WPA-PSK Other Regions:
1)Click on the "Apple" menu > "System Preferences".
Encr yption Type: TKIP AES
2)Click on the “Network” icon. E-mail: [email protected]
Key Mode: HEX ASCⅡ
Key:
3)Click on “Ethernet” in the left side box and click on “Advanced” in the
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
lower right corner.
4)In the top options, select “ TCP/IP”.

PKUM05176
Key Renewal: 86400 seconds(60-86400)

5)In the pull-down menu next to “Configure IPv4″ select “Manually”.

DHCP ( dynamic ) Static IP PPPoE 6)Fill in the “IPv4 Address/Subnet Mask/Router ” parameters, and click
“OK” then “Apply”.
5 6 7 8