Scribd
Upload
2K views3 pages

Multiple Choice Questions (MCQ) On Forging Process - MechanicalTutorial

The document contains 10 multiple choice questions about different forging processes: 1) Roll forging is a forging method for reducing the diameter of a bar and making it longer in the process. 2) Upset forging is used to force the end of a heated bar into a desired shape. 3) Hot press forging causes a steadily applied pressure instead of impact force.

Uploaded by

rahma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views3 pages

Multiple Choice Questions (MCQ) On Forging Process - MechanicalTutorial

The document contains 10 multiple choice questions about different forging processes: 1) Roll forging is a forging method for reducing the diameter of a bar and making it longer in the process. 2) Upset forging is used to force the end of a heated bar into a desired shape. 3) Hot press forging causes a steadily applied pressure instead of impact force.

Uploaded by

rahma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Multiple Choice Questions On Forging Process

6. Roll forging.......

A. Causes a steadily applied pressure instead of impact force


B. Is used to force the end of a heated bar into a desired shape
C. Is a forging operation in which two halves of rotating die open and close rapidly while
impacting the end of the heated tube or shell
D. Is a forging method for reducing the diameter of a bar and in the process making it
longer
E. None of the above

✔ View Answer

[Link] a forging method for reducing the diameter of a bar and in the process making it
longer

✍ Your Comments

7. Upset forging.......

A. Causes a steadily applied pressure instead of impact force


B. Is used to force the end of a heated bar into a desired shape
C. Is a forging operation in which two halves of rotating die open and close rapidly while
impacting the end of the heated tube or shell
D. Is a forging method for reducing the diameter of a bar and in the process making it
longer
E. None of the above

✔ View Answer

[Link] used to force the end of a heated bar into a desired shape
✍ Your Comments

8. Hot press forging.........

A. Causes a steadily applied pressure instead of impact force


B. Is used to force the end of a heated bar into a desired shape
C. Is a forging operation in which two halves of rotating die open and close rapidly while
impacting the end of the heated tube or shell
D. Is a forging method for reducing the diameter of a bar and in the process making it
longer
E. None of the above

✔ View Answer

[Link] a steadily applied pressure instead of impact force


✍ Your Comments

9. Forging of a plain carbon steel is carried out......

A. 750oC
B. 900oC
C. 1100oC
D. 1300oC
E. None of the above

✔ View Answer

D.1300oC
✍ Your Comments

10. The operation of removing the burr or flash from the forged parts in drop forging is
known as.......

A. Lancing
B. Trimming
C. Coining
D. Shot peening
E. Burring

✔ View Answer

[Link]
✍ Your Comments

You might also like