Commodore 1084 S01 PAL VERSION Service Manual 09.91 PN-400413-01 CommodoreProduced By: Commodore International Spare Parts GmbH Braunschweig, West Germany SERVICE MANUAL 1084S-D1 PAL VERSION SEPTEMBER, 1991 PN-400413-02 INTERNATIONAL EDITION SERVICE POLICY AND PART NUMBER INFORMATION MAY VARY ACCORDING TO COUNTRY. SOME PARTS MAY NOT BE AVAILABLE IN ALL COUNTRIES. Commodore Business Machines, Inc. 1200 Wilson Drive, West Chester, Pennsylvania 19380 U.S.A. ‘Commodore makes no expres or implied warranties with regard tothe information contained herein. The infor- mation is made available solely on an as is bass, and the entice risk as to completeness, reliability, and accuracy is with the user. Commodore shall not be liable for any damages in connection with the use of the information contained herein. The isting of any available replacement art herein doesnot constitute in ay ease a recommenda- tion, warranty or guaranty as to quality or suitability of such replacement par. Reproduction or use without ex- press permission, of editorial or pictorial content, in any matter is prohibited. ‘This manual contains copyrighted and proprietary information. No part of this publication may be reproduced, stored in a retrieval system, ot transmitted in any form or by any means, electronic, mechanical, photo- copying, recording or otherwise, without the prior written permission of Commodore Electronics Limited. Copyright © 1991 by Commodore Electronics Limited. All rights reserved, Printed in U.S.A. Reprinted with permission of Daewoo Electronics Co. LtdCONTENTS ‘SPECIFICATIONS 1 IMPORTANT SERVICE SAFETY INFORMATION 2 INSTALLATION AND CHASSIS PARTS LOCATION 4 SERVICE INSTRUCTIONS. 6 SERVICE ADJUSTMENT 13 ‘SERVICE INFORMATION. 719 Rear Connection Panel 19 P.C.B. Board Layouts 20 Circuit Diagram 27/28 Block Diagram 29/30 Parts List 31 SPECIFICATIONS CAT 13V 90 deflection angle in-line Video band width: GBI: 15 MHz Dot pitch 0.41 or 0.42mm high resolution ‘Analog RGB: 10 MHz Input signals : Digital RGBI, Analog RGB, ‘Composite: 4.4 MHz PAL Composite, Separated Video (luna & Separated Video: 5.2 MHz chroma) and Audio (Luma & Chroma) Input-level: Digital RGB: TTL Scanning frequency : Horizontal: 15.75 KHz ‘Analog RGB: Video 0.7 Vpp Vertical: 50 Hz Sync TTL level Audio (Stereo) Input: 1 Vpp/47K Comp,, Video, Chroma: 1 Vpp75 Output: 1W/ Display size : 260(n) x 186(v) mm Dimensions 352{W) x 376(D) x S26(H) om Colors RGBI: 16 colors Weight Approx. 11.0 Kg Analog RGB: Full colors Power input 220/240VAC, 50 Hz, 0.54 Comp.: Full colors Power consumption : 75W Resolution: RGB: 2,000 characters (80 column x 25 lines) *Design, features and specifications are subject to ‘Comp. 1,000 characters change without notice. (40 column x 25 lines)IMPORTANT SERVICE SAFETY INFORMATION WARNING: ‘An isolation transformer must be used between the AC supply and the AC plug of the color monitor before servicing or testing is performed on this monitor, since part of the chassis and the heatsink are directly connected to one side Of the AC line which could present a shock hazard. The chassis of the monitor should never be connected ground. Before serving is performed, read all the precautions labelled on the CRT, chassis, and on the inside of the cabinet of this monitor. | XRAY RADIATION WARNING NOTICE | WARNING: PARTS WHICH INFLUENCE RAY RADIATION IN HORIZONTAL DEFLECTION. HIGH VOLTAGE CIR- ‘CUTTS AND PICTURE TUBE, ETC., ARE INDICATED BY (+) IN THE PARTS LIST FOR REPLACEMENT PURPOSES, USE ONLY THE TYPE SHOWN IN THE PARTS LIST. | | L PRODUCT SAFETY NOTICE WARNING: FOR CONTINUED SAFETY, REPLACE SAFETY CRITICAL COMPONENTS ONLY WITH MANUFAC- TURER RECOMMENDED PARTS. THESE PARTS ARE IDENTIFIED BY SHADING AND BY) ON THE SCEMATIC. DIAGRAM. NOTICE D’AVERTISSEMENT DE RADIATION AUX RAYONS X AVERTISSEMENT: LES PIECES QUI INFLUENCENT LES RAYONS X AU COURSE DE LA DEVIATION HORIZON: TALE, LES CIRCUITS A HAUTE TENSION ET LE TUBE-IMAGE, ETC. SONT ACCOMPAGNEES D'UN ASTERIQUE (4) DANS LE CATALOGUE DE PIECES DETACHEES. DANS LE CAS D’UN REMPLACEMENT, UTILISER UNIQUE- MENT LES MODELES DE PIECES DANS LE CATALOGUE DE PIECES DETACHEES. NOTICE DE SECURITE AVERTISSEMENT: POUR ETRE ASSURE D'UNE SECURITE OPTIMENT A TOUT MOMENT, REMPLACER LES COMPOSANTS CRITIQUES UNIQUEMENT PAR LES PIECES RECOMMANDEES PAR LE FABRICANT DE APPAREIL, CES PIECES SONT IDENTIFIEES PAR UNE ZONE D'OMBRE ET PAR SYMBOLE ( ) SUR LE SCHEMA DE MONTAGE. The manufacturer's warranty and reliabites willbe void it any unauthorized moditications, alterations or additions are made. For replacement purposes, use the same type or specified type of wire and cable, ensuring that the positioning of the wires is followed (especially for H.V. and power supply circuits). Use of alternative wiring or positioning could result in damage to the set or in a shock or fre hazard. The picture tube used in this monitor employs integral implosion protection and should be replaced with the tube of the same type number for continued safety. When handling the CRT, shatter-proof goggles must be worn after completely discharging the high voltage circuit. Do nat lift the picture tube by the neck. WARNING: BEFORE RETURNING THE MONITOR TO THE CUSTOMER PERFORM THE FOLLOWING SAFETY CHECKS IN ITEMS 1, 2 AND 3 FOR THE CONTINUED SAFETY OF THE SERVICEMENT AND CUSTOMER, AVERTISSEMENT: AVANT DE RETOURNER LE MONTITEUR CLIENT, PROCEDER AUX CONTROLES DE SECURITE DES ITEMS 1, 2 ET 3 POUR ASSURER UNE SECURITE OPTIMUM AU REPARATEUR COMME AU CLIENT.1. Leakage Current Test: Plug the AC power cord directly into a 220V AC outlet. (Do not use an isolation transformer for this test) Measure the current flowing from all exposed metal parts of the cabinet, including the rear cover, (handle bracket, wooden cabinet, screw heads, video input terminal, control shaft, etc.) to the ground pin of an AC outlet or to a known TOund. (waterpipe, conduit, etc) This leakage test should be performed with the AC switch ON and repeated with the AC switch OFF. The measured current must be less than 0.5 miliamp. Any measurements not within the limits outlined above are indicative of a potential shock hazard and corrective action must be taken before returning the instrument to the customer. verze ac sory nes Out = ‘>! ‘Color Oisoay Meta! Suraces Ss 3 ee 1 sa evs Set] D> [eens = STAC outa! or ether sown out ‘AC Leakage Test 2. Resistance Test: \With the AC plug is removed from the 220VAC outlet, place a jumper across the two attachment plug prongs except Grounding Pin. Turn the switch ON. Using an ohmmeter, connect one lead to the jumped AC plug and touch the other lead to each exposed video input terminal, and to any exposed metal parts. The resistance measured should not be less than 1.0 megohm or grater than 5.2 megohms. Any resistance value below or above this range indicates an abnormality which requires corrective action. Repeat the test with the AC switch in the OFF position, 3. Wire Routine: In case of removing Wire Clamp during service, make sure to return Clamp and Wiring routes to original positions after servicingINSTALLATION AND CHASSIS PARTS LOCATION INSTALLATION OF THIS COLOR MONITOR CHASSIS AND INITIAL CHECK POINTS When installing this color monitor’ chassis, first check operation on a black and white telecast, Check and if necessary, adjust centering, size, and locus. Observe the picture for proper black and white reproduction (tracking) over all areas Of the screen. No objectionable color shading or fining should be evident. If shading or fringing is evident, degauss the monitor. In most instances after installation, a technician need only degauss the faceplate area and touch-up the static (center) convergence. CHASSIS PARTS LOCATION The degaussing coil should be moved slowly around the front faceplate of the picture tube and around the sides ‘and front of the monitor. The coil should then be withdrawn slowly to a distance of at least six to ten feet before discon necting from the AC supply. This monitor chassis is equipped with an automatic degaussing circuit which effectively demagnetizes the faceplate each time the monitor is switched ON after having been OFF for at least ten minutes, Note: See "SERVICE ADJUSTMENT" on page 13 for details of adjusting procedures. ‘Le . Input ‘Video Input Power Inlet | ie Chroma input CompiLCA Mode —s iBJLCA Mode SW | IGBIComp, V-Pos Mode SW. AGB input TTUAnalog Mode SW-SERVICE INSTRUCTIONS er RIGO nT “ si REMOVAL (SEEFIGS.3/ eS inecaaceSiac Remove the nine screws securing the rear cover of the cabinet. (See Fig. 3) 2. Pull the rear cabinet about 10cm to the rear. 3. Remove (pull to the rear) the speaker connection near the radio output at the left side of the cabinet. (See Fig. 4) 4, Remove the rear cabinet, 5. Remove solder connection of the black wire connec: ting CRT grounding and neck p.c. board, then remove the neck p.<. board from the picture tube. (See Fig. 5) Remove the second anode cap. Remove the connectors as follows: 1) Deflection yoke connector 2) Degaussing coil connector 3) Sound controls connector 4) Speaker connector 5) Power indicator connector 8. Remove the two screws securing the power switch. 9. Take the chassis out of the cabinet. 10. To install the chassis, repeat the above procedure in aa reverse order. x@ speaker Connector Fig. 4 Remove Connection of | Black Wire from ORT Ground | Fig. 3 Fig. 51. Remove the rear cabinet. 2. Repairing of main chassis can be done easily, if stood as shown in Fig. 6 PICTURE TUBE REMOVAL In order to remove or replace the picture tube, the chassis must first be removed, Refer to chassis removal procedure. After the chassis has been removed, proceed as follows. 1. Loosen the clamping screws on the deflection yoke, purity and static convergence magnet, and remove them. 2. Remove four screws securing the picture tube to the front cabinet. Detection Yoke Purity and Static Convergence Magnet Fig. 7en PRECAUTIONS FOR REPAIRS 1. Check for bad contacts on connectors on the main PC board and elsewhere by applying hand pressure. 2. Check AC power supply for problems-e.g. blown fuse, bad switch or AC outlet. 3. Check for intermittents or defective soldering on the main board by striking the reverse side of the board gently with an insulated bar. 4, When soldering PC boards, limit the soldering iron temperature to 500°F (200°C) to avoid peeling of the foil 5. When soldering transistors or other semiconductors, use tweezers or a heat sink clip as shown in Fig. 8 to prevent heat damage. Soldering tron thru 200 | Fig. 8SS SET TROUBLESHOOTING =~ He ‘As major parts of this chassis employ ICs, defects can often be isolated by referring to the table of symptoms in Table 1. Additional checks of transistor and IC, DC voltages and waveforms as shown on the schematic will assist in pinpointing the problem area. Remember also to check for fauity resistors and capacitors, etc. around defective ICs and transistors, IorTR ‘SYMPTOM. HOt: POWER SUPPLY CIRCUIT NO RASTER 1201: HORIZ OSC, DRIVE, SYNC SEP CIRCUIT NO RASTER, NOPICTURE, NO HIGH VOLTAGE UNSTABLE PICTURE 1202: SYNC PROCESSING CIRCUIT RGB MODE UNSTABLE PICTURE 1801: VERT OSC, OUTPUT CIRCUIT HORIZONTAL LINE ONLY, POOR VERTICAL SCAN \401: VIDEO PREAMP, COMPOSITE COLOR MATRIX, MODE SWITCHING RGB AND COMPOSITE SIGNAL, AUTO OUT-OFF CONTROL CIRCUITS NO PICTURE OR POOR PICTURE, NO AUTO CUT-OFF CONTROL, NO MODE SWITCHING OF COMPOSITE AND RGB SIGNAL 1402: 12V REGULATOR NO PICTURE OR POOR PICTURE 1403: 5V REGULATOR RGB MODE NO PICTURE, POOR PICTURE 1601: COMPOSITE COLOR CIRCUIT NO COLOR, UNSTABLE COLOR 1602: MODE SWITCHING CIRCUIT NO MODE SWITCHING, NO PICTURE, UNSTABLE PICTURE. 1701, 1702: TTL CIRCUIT TTL RGB MODE. NO PICTURE. POOR PICTURE. 1801, 18011: STEREO SOUND CIRCUIT NO SOUND OR POOR SOUND (Q201; HORIZ DRIVE CIRCUIT NO PICTURE, NO HIGH VOLTAGE (202; HORIZ OUTPUT CIRCUIT NO PICTURE, NO HIGH VOLTAGE (203: SYNC SWITCHING CIRCUIT AGB MODE, UNSTABLE PICTURE (Q601; COLOR INPUT BUFFER CIRCUIT NO COLOR, POOR COLOR (Q602: COMPOSITE BUFFER CIRCUIT ‘COMPISEP MODE, NO VIDEO OR POOR VIDEO 701, 0702, 0703: TTL BUFFER TTL MODE, NO PICTURE OR POOR PICTURE (Q704: TTL COLOR MATRIX CIRCUIT TTL MODE, NO BROWN COLOR, OR UNSTABLE COLOR (0501-0504: R OUTPUT CIRCUIT NO RED PICTURE (0505-0508: G OUTPUT CIRCUIT NO GREEN PICTURE (509-0512: 8 OUTPUT CIRCUIT NO BLUE PICTURE TABLE 1.SS TROUBLESHOOTING CHARTS The following charts are devoted to troubleshooting which, if followed carefully, will assist you in tracking down a fault to the collect stage. In order to utlize the charts (fault trees), firstly establish the complaint, i.e. no raster. Locate the chart applicable and then progress through the arious alternatives until a final block the offending com- ponents or stage. 1. NO. RASTER, CHECK MAIN B+ (105V) ON MAIN PCB ABNORMAL} NORMAL CHECK F101 (FUSE) CHECK 15V LINE OF FBT CHECK 12v LINE OF 1201 CHECKIREPLACE 1201 ABNORMAL RASTER APPEARS CHECKIREPLACE 24V LINE, (R234, D211), 105V LINE OF VIDEO AMP. (R237) CHECKIREPLACE, POWER AND HORIZ CIRCUIT REPLACE F101 REPLACE D101, R102 CHECKIREPLACE R27, 228, 221, D204 CHECK D101, R102 CHECK 1101, R106 REPLACE 1101, R106 REPLACE D102 CHECK HORIZONTAL OUTPUT CIRCUIT 2. NO SOUND CHECK SOUND B+ (21V) ON MAIN PCB ‘ABNORMAL, CHECK 1801, 18011, SPEAKER AND. CONNECTOR ASSY SS2N. REPLACE 1801, 18011 SPEAKER AND CONNECTOR ASSY SS2N, CHECK/REPLACE R113, D103 (OK STILL NO SOUND 103. NO PICTURE CHECK WHETHER THE BRIGHTNESS IS CONTROLLABLE OR NOT Yes [no CHECKIREPLACE EACH SIGNAL (COMP. SEP. RGB) 1602, 1601, 1401, 0601, Q6d2 CHECK + 105V LINE CHECKIREPLACE R237 ON THE CRT CIRCUIT S07, R517, R527 AND CRT DRIVE t ai 2602, 0506, 0510 STILL NO PICTURE CHECKIREPLACE PIN 6 OF 1201 FOR SAND- CASTLE PULSE CHECKIREPLACE 1401,SW2,SW3 4, NO COLOR (FOR COMP & SEP MODE) ‘ADJUSTMENT OF CONTROL CHECKIREPLACE | NG. 2601, 1602 OK CHECKIREPLACE | NG. MODE Swe,SW3 OK (CHECKIREPLACE 1601, 0605, 2606 CHECK COLOR CONTROL NO COLOR JADJUST THE COLOR SYNC |CAPACITOR C613 REPLACE ‘swe, SW3 REPLACE 1601 (2605, 0606 1"5. NO VERTICAL SCAN (ONE HORIZ, ONE LINE RASTER) CHECKIREPLACE R227, R228, R234 CHECK VERTICAL VOLTAGE OF EACH PIN OF 1301 ICHECKIREPLACE DEFLECTION] } YOKE AND-CONNECTION CHECKIREPLACE VERTICAL POWER RESISTOR R234 REPLACE 1301 6. OUT OF VERTICAL SYNC AND HORIZ. SYNC (COMPOSITE SYNC) CHECKIREPLACE SIGNAL CABLE ABNORMAL — | NORMAL REPLACE SIGNAL CABLE CHECK SIGNAL INPUT TERMINAL REPLACE SIGNAL INPUT JACK CHECK 1201, 1301 NG CHECKIREPLACE 1201, 1301 CHECK 1602 CHECK 1202 REPLACE 1202 REPLACE 1602 12DESOLDERING OF ICS AND TR Tre following tools are suggested for desoldering semi: ‘conductors: 1. Desoldering tools 22) Hand suction type-Solde-Pull® (model $8011, Edsyn inc. Van Nuys, CA) or equivalent. ) Wire-Wick type-Solder-Wicle® (size: Co, Cavina, CA) oF equivalent. , Solder Removal 2 Soldering tron-Maximum wattage recommended is 40W. Higher power soldering irons may damage the copper foil of board. Note: ‘When desoldering parts, heat the joint and remove the solder auickly. The PC foil may peel trom the board it heat is applied for too long. Desoldering Ribbon Soldering Iron Fig. 9 SERVICE ADJUSTMENT FOCUS ADJUSTMENT ‘Adjust the focus control, located on the H.V. unit (1202) for maximum overall definition and fine picture detail with brightness and contrast controls set at normal viewing levels. VERTICAL SIZE (R306) ADJUSTMENT Tre verticai size (height) control is the screwdriver ad justment that is accessible through the front cover. cation of the control is shown in Figs. 1 and 10. These controls must be adjusted until the correct picture pattern is obtained or te COLOUR AMPLITUDE AND PHASE ADJUSTMENT Receive PALIDEM-bar signal Connect the probe of oscilloscope to B-Y output Adjust L602 and R602 in order to make wave form flat on soreen, Receive color bar signal instead of DEM signal Adjust L602 to make BY output stable HORIZONTAL SIZE (R337) ADJUSTMENT ‘The horizontal size (R337) is the VR which controls the Hssize of the picture. After received cross hatch pattern, adjust the horizontal size by turning this control CIRCUIT PROTECTION 4.0A fuse, mounted on the main PC board, hes been provided to protect the power out put circuit. See Figs. 2 and 10. HORIZONTAL HOLD (R225) ADJUSTMENT (SEE FIGS. 2 AND 10) ReceNve the color signal. Set the brightness and contrast controls to a normal pos- tion A warm-up period of at least five minutes should be allowed and alignment should be done. 1. Connect a jumper wire between pin 12 of 1201 and ground line. 2, Adjust the horiz, hold control (R225) until the picture is stable. (Tune R225 to 15.734 KHz). 5 1al oe be MoS) ORE CONTRAST. COLOR ne oneen sw OME “T= = Fars rate Tare BIAS GBIAS RBIS eae 9 98 ms " b E (J: = G6 pas fa18 Hue vce. POS! VIDEOIAUOVO I a Fig. 10 14This adjustment should be made only when the chromalvideo (1601) or parts of the APC circuit have been replaced, cor when the picture colors are unstable. For adjustment, use the APC, ADJ control (C813). Procedures . Apply a color bar signal 10 the video input terminal. Turn the color control fully clockwise and position the tint control at the mechanical center. Connect a jumper wire between pin 11 of 1201 and ground line Turn the APC, ADJ control (0813) with an insulated screwdriver until the color bar on the screen is synchronized. Removed the jumper wire and capacitor. High voltage is not adjustable but must be checked to verity that the monitor is operating within safe and efficient design limitations as specified! 1. Remove cabinet back 2. Operate monitor for at least 15 minutes at 220V AC line with video signal or test signal properly tuned in. 8. Rotate the brightness and contrast controls to maximum clockwise position 4. Connect an accurate high voltage meter to CRT anode. Reading should be between 23KV and 25KV. CONTROL DE HAUTE TENSION La haute tension rvest pas reglable mais doit etre controlee afin de s'assure que le moniteur foncitionne d'une mesure de securite et d'efficacite determinee par le cahier des charges. Pour le faire: 1. Enlever le couvercle diarriere du cabinet 2. Faire fonctionner le moniteur pendant au moins 15 minutes a la ligne de 220V, AC en accordant correctement le signal de video ou celui d essai ‘3. Tourner a fond les commandes de brilance et de contraste dans le sens de aiguilles d'une montre. 4. Brancher un voltmetre de haute precison sur l'anode de CRT. La valeur relevee doit etre comprise entere 23KV et 25KV. VERTICAL POSITION CONTROL (R318) ADJUSTMENT (SEE FIG. 10) ‘The vertical position control (R318) is the VR which controls the vertical position of the picture. If the vertical position of the picture is not at the center of the picture tube, adjust the vertical positon by turing this control 15aE n ian SCREEN ADJUSTMENT ae It is important to adjust the screen volume in auto white balance system. Receive cross hatch signal. Set the con- trast and bright volume to a maximum position. Turn the screen volume (see fig. 10) to the clockwise unti find out retrace line. After that, Turn the screen volume to the unclockwise until just disappear point. Confirm the state of video cut off with contrast and bright control IT unstable cutoff screen, readjust with above action COLOR PURITY ADJUSTMENT For best results, it is recommended that the purity adjustment be made in the final location. If the monitor will be moved, perform this adjustment with it facing east or west. The monitor must have been operating 15 minutes prior to this procedure and the faceplate of the CAT must be at room temperature. The monitor is equipped with an automatic degaussing circuit. However, if the CRT shadow mask has become ex- cessively magnetized, it may be necessary to degauss it with a manual coil. Do not switch the coll OFF wile the raster shows any effect from the coll Purity magnets are used for color purity and vert, centering adjustment. Purity adjustment procedure is as follows. NOTE: Refore attempting any purity adjustments, the receiver should be operated for at least 15 minutes, Demagnetize the picture tube and cabinet using a degaussing coil Turn the CONTRAST and BRIGHTNESS controls to maximum. Open the R503 and R529 to provide only a green raster. Loosen the clamp screw holding the yoke, and side the yoke brackward to provide vertical green belt (zone) in the picture soreen, Remove the Rubber Wedges. Rotate and spread the tabs of the purty magnet (See Fig. 7) around the neck of the picture tube until the green belt is in the center of the screen. At the same time, center the raster vertically 7. Move the yoke slowly forward until a uniform green screen is obtained. Tighten the clamp screw of the yoke temporarily & Check the purity of the red and blue raster by opening the cathode resistor. 3. Obtain a while raster, referring to ““Black and white tracking”. (Sold the opened resistor) 10. Proceed with convergence adjustment 16A recently developed deflection yoke and electron guns construction has been used on this equipment in combina tion with indine guns and biack strips screen to make a barreltype magneticeld distribution for vertical deflection ‘and pin-cushion-type magnetic field for horizontal deflection with which a self-converging system can be obtained, this type is different from conventional unity magnetic field distribution type deflection yoke, 4-pole magnets and &:pole magnets are employed fr statio convergence instead of a convergence yoke, A crosshatch signal should be connected to the video input terminal of the monitor. 2. Adjust ho BRIGHTNESS and CONTRAST Contols for wel defined pattern 3. Adjust two tabs of the 4-pole Magnets to change the angle between them (See Fig. 11) and superimpose red and blue vertical lines in the center area of the picture screen. (See Fig. 12) 4, Tum both tabs at the same time keeping their angles constant to superimpose red and blue horizontal lines at the center of the screen. (See Fig. 12) 5. Adjust two tabs of 6-pole Magnets to superimpose redibiue line with green one. Adjust the angle affects the ver- tical lines and rotating both magnets affects the horizontal lines. 6. Repeat adjustments 3, 4, 5 keeping in mind red, green and blue movement, because 4-pole Magnets and 6-pole Magnets interact and make dot movement complex. 6POLE ADJUST THE ANGLE CONSTANT. MAGNETS (VERTICAL oa ROTATE TWO. ho\ ‘AT THE SAME TIME (HORIZONTAL LINES) Fig. 13 ADJUSTMENT OF MAGNETS 4 POLE MAGNETS Fig. 11 CONVERGENCE MAGNET ASSEMBLY BLU RED RED/BLU GRN 4Pole Magnets Movement 6-Pole Magnets Movement Incline the Yoke up Incline the Yoke right (or down) (or left) Fig. 12 CENTER CONVERGENCE BY 14 CIRCUMFERENCE CONVERGENCE CONVERGENCE MAGNETS BY DEF. YOKE 17RS SSS PRECISE ADJUSTMENT OF DYNAMIC CONVERGENCE (SEE FIG. 11-16) NOTE: This adjustment requires trubber Wedge Kit. Loosen the clamping screw of deflection yoke to allow the yoke to tt. Place a wedge as shown in Fig. 15 temporarily. (Do not remove cover paper on adhesive part of the wedge) Tit front of the deflection yoke up or dewn to obtain better convergence in circumference. (see Fig. 14) Push the ‘mounted wedge into the space between picture tube and the yoke to hold the yoke temporarily Place other wedge into bottom space and remove the cover paper to slick Tilt front of the yoke right or left to obtain better convergence in circumference. (See Fig. 14) Hold the yoke position and put another wedge in either upper space. Detach the temporarily mounted wedge and put it in another upper space. Stick it on picture tube to fix the yoke. After placing three wedges, recheck overall convergence. Tighten the screw firmly to hold the yoke tightly in piace. 9. Stick 3 adhesive tapes on wedges as shown in Fig. 15. » BLACK AND WHITE TRACKING — The purpose of this procedure is to optimize the picture tube to obtain a good black and white picture at all brightness levels, while at the same time, achieving maximum usable brightness. Normal purity adjustment must precede this procedure. 1. Set the Video mode switch to SEP Mode position, 2. Connect the black signal to SEP input terminal 3. Set the brightness and contrast control at the mechanical Max position, 4, Rotate the RG.B. drive controls to midrange. 5. Rotate screen VR fully counter clockwise until retrace lines appear on the screen. 6. Slowly tum the screen control on FBT anticlockwise until retrace lines just disappear on the screen for Auto Cut off control. 7. Receive the white signal 8. Adjust A.G.B. drive controls (R412, R413, R414) to produce a hisite white screen. 9. Set the brightness and picture controls to minimum, ‘Then, the raster should appear dark. 10. Move the brightness control until a dim raster is obtained, 11. If necessary, touch-up adjustment of the screen controls to obtain best white uniformity on the CRT screen 12. Set the brightness and picture controls at the mechanical center position, It necessary adjust the A.G.B. drive controls to produce a uniform black and white picture. | DEFLECTION YOKE CONVERGENCE MAGNET ASS'Y TEMPORARY MOUNTING RUBBER WEDGE \ “ " <7 ee ADHESIVE | ¢ DEF GLASS CLOTH A | TAPE yore | ig. 15 Rubber Wedges Location Fig. 16 Picture Tube Neck Components Location 18SERVICE INFORMATION 1. REAR CONNECTION PANEL. Fig. 17 Pin, No. DIGITAL ‘ANALOG i Ground Ground 2 Ground Ground 3 Red Red 4 Green Green 5 Blue Bue 6 Intensity = 7 = ‘Sync. 8 H. Syne, = 2 V. Syne, = Shell Shield Shield Polarity Video... Positive Video... Positive Sync....Negative or Positive Sync....Negative2. NECK P.C. BOARD 20 Fig. 18-b Bottom View3. EARPHONE P.C. BOARD Fig. 19 Top View 4, LED P.C. BOARD DSOIA Fig. 20 Top View 21/225. MAIN P.C. BOARD 23/24 Fig. 21-a Top View pI z0-sccooee.6sCOMMODORE MONITOR 1084 € van 25v/250¥ Fig. 21-b Bottom View 8 3 s 8 3 } nD 25/26© SCHEMATIC DIAGRAM OF CHASSIS NO A-17 EE Te 0E | TADS | ono oy ha I Te02 oe=1560 (8) 1, AISI BOR Tx, RED 5. ISS MEE WED I ENTE ML PION USE TK $C AMES ERASE MT SOME AL OTR LAE ME a 2 MIS PERI TED UN SMT AL SION LES EMT. ESD IM HE SE TE PESO CURSE Ik MOE MES SST 1 ESD 2712COMMODORE MONITOR 1084 sp1 BLOCK DIAGRAM OF CHASSIS NO A-17 AUDIO IN A AUDIO IN B VIDEO IN + ‘SOUND AMP 1801 ‘SOUND AMP. 4801-1 SPEAKER A SPEAKER B o——] Composite CHROMA IN o— To] swe Loh sw3 SELECT sw CHROMA RGB PROCESS TIL& ANALOG: "701, 1702 SYNC PROCESS. 202 120 VAC 60 Hz VIDEO DECORDER 1601 VIDEO CONTROL AMP RGBIVIDEO SELECT VIDEO CONT. BRIT. COLOR CONTROL AUTO CUTOFF (DC CLAMP) OUTPUT AMP (0501-0512 SAND CASTLE COMPOSIT SYNC 401 AUTO OUT OFF FEED BAOK i SAND CASTLE VERTICAL OSC & OUTPUT 1301 VERTICAL OUTPUT SIDE PIN VSYNC PROCESS SANDCASTLE SIDE PIN Laor LINEARITY COIL L202, 311, R320, R323, C312 —-- WIDTH COIL 337, Q301, Q302 HIGH VIG Focus SCREEN c HEATER, HORIZONTAL HDRIVE OSC & DRIVE 201 201 T201 OUTPUT 202 FLY BACK 202 POWER FILTER hot - sms. CONTROL, RECTIFIER D102 103 REGULATOR: 402 403 5V REGULATOR Te aw 29130PARTS LIST #NOT! @ Mark : CRITICAL PARTS * Mark : X-RAY RADIATION RELATED PARTS Mark : SAFETY RELATED PARTS 602313—XXX LOC CBM PN. ‘OEM-CODE PART-NAME. PART-DESC ‘ooo10 | 602313-188 | 9970190086. PCB MAIN AS (GMC-1410PR Bt '602313-107 | 97°6262900__| CONN WAFER ‘YMW-025-04 2.5MM BN (602313-096 | 9970740008 ‘CONN AS. ‘YBHO25-04 + 1185426 = 380 C4 (602313-109 | 97°6263300 ‘CONN WAFER, ‘YMW.-025-08 2.5MM Cio | 602313-062_ | CLYL2E474M C LINE ACROSS 250V 0.47MF M_U.C C102 | 602313-062 | CLYL2E474M CLINE ACROSS 250V 0.47MF M U.C cio3 | 602313-105 | ccye3e332m__|C CERA. DE7120F 3300PF-M VAT-KC, A (CLYS2E332M__| CLINE ACROSS ‘AC 250V 0.0033MF M_ Cio | 602313-015 | ccvesca32m__|C CERA. DE7120F 3300PF-M_VAT-KC, A GLYS2E332M | CLINE ACROSS ‘AG 250V 0.0033MF M_ ios | 602313-014 | ccxesG222m_— | C CERA. DE7100 222 M KAI-KC. A (CLYS2E222M | "C LINE ACROSS: ‘AC 250V 0.0022MF M. Cio | “602373-014 | ccxBaG222m_|C CERA. DE7100 222 M KAI-KC A GLYS2E222M | C LINE ACROSS: ‘AC 250V 0.0022MF M. Ciog | 602373-054 | ceynagisit (C ELECTRO 400V_150MF FWS 3540 Cito |“ 602313-059 |" CEXE1H2208 (C ELECTRO SOV 22MF RS 6.311 TAPING Citi | 602313-057 | CEXE1H1098. (C ELECTRO SOV IMF RS 5x11 TAPING cite | 602313-017 | CBxB30102K CCERA HIKB 2KV_1000PF K DF =0.5%6 cii4—_ | 602313-017 | cBx830102K. C CERA. HIKB 2KV 1000PF K DF =0.5%6 cit6 | 602313-033 | Ceve2ci01a. (C ELECTRO 160V_100MF RS 16x 35.5 C117 | 602313-033_| CEYE2C101A C ELECTRO 160V_100MF RS 16x 35.5 cite | 602313-018 | ccx830152K’ C CERA. HIKB 2KV_1500PF K ciig | 602313-023 | ccxe2He81k (CCERA. HIKB 500V_ 680PF_K TAPING ci20 | 602313-052 | CexEiva71v (C ELECTRO '35V 470MF RSS 10x20 cizi | 602313-049 | CexFIVioTv C ELECTRO 35V_100MF RSS 8x11.5, crea | 602313-028 | CcxF3a472z CCERA, HIKF 1KV 4700PF Z cies | 602313-028 | CCxFSA4727 CCERA. HIKE 1KV 4700PF Z Ci26 | 602313-028 | CCxFSA472Z CCERA. HIKB_1KV 4700PF Z ciz7_| 602313-028 | CCxFA472z C CERA, HIKB_1KV_4700PF Z 130 | 602313-059 | CEXE1H220A (C CERA, ‘SOV 22MF RS 6.3% 11 TAPING 202 | 602313-065 | cMxm2az23K—[C MYLAR 100V 0.022MF K TAPING C203 | 602313-021 | ccxB2H391k CCERA HIKB 500V_390PF K. C205 | 602313-073 | CMxB206834 C MYLAR, ‘200 0.068 MF J (ED) C206 | 602313-022 | CCxB2H561K CCERA, HIKB 500V_560PF_K TAPING *@cao7 | 602313-063_|CMxH3cot2s | C MYLAR 1.6KV 9100 PF J BUP 208 | 602313-075 | CMxE26223) C MYLAR, “400V 0.022MF J (PL) caro | 602313-020 | ccxe2H102k C CERA, HIKB SO0V_1000PF K_ @cen | 602313-074 | CMxF20704) C MYLAR, 200V_0.7MF J MPP care | 602313-071__ | cmxmenzzay[C MYLAR 100V 0.22MF J 213 | 602313-068 | cMxm2A104J —[_C MYLAR 100V 0.1MF J TAPING cata | 602313-064 | cmxm2ai03/—[_C MYLAR 100V_0.01ME J TAPING 216 | 602313-072 | CMxB2A472 C MYLAR, 100V_4700PF J (ED) carr | 602313-057 | CEXETH109A. (C ELECTRO SOV IMF RS 5x11 TAPING 31ian ememmmminetiaeee see LOC ‘CBM PN ‘OEM-CODE PART-NAME PART-DESC c2i8__ [602313064 | CMXM2a103) —_|_O MYLAR 100V O.01MF J TAPING aig [602313-119 | CEXE1H479A G ELECTRO SOV 4.7MF RS 5x11 TAPING c220_ | 602313-046 | CEVE1E1020 (C ELECTRO ‘25V 1000MF RU 16x25 caai | 602313-020_ | CCxB2H102K CCERA, HIKB 500V_1000PF_K TAPING c222 | 602313-034 | CEYE2C1008 (ELECTRO 160V_10MF RS 10%20 c226 | 602313-122 | CEXETHT00C G ELECTRO SOV 10MF RU 5x11 cea7 | 602313-020_ | CCXB2H102K C CERA, HIKB 500V 1000PF_K TAPING C226 | 602313-032 | CBxFIHi04z. CCERA SEMI HIKF SOV 0.1MF Z TAPING C229 | 602313-098 | CEXEIC1008, ELECTRO 16V10MF RS 5x11 TAPING cai | 602313-029 | CCXFIH1032. CCERA HIKF SOV 0.01MF Z TAPING caa2_ | 602313-039 | CEXFIC221V (C ELECTRO 16V 220MF RSS 8x11.5 c233__[602313-043 |" CEXE1C470A. C ELECTRO 16V 47MF RS=6.3 11 TAPING 235 | 602313-132 |" CEXE1H330A C ELECTRO ‘SOV 3.3MF RS 5x11 TAPING c236__ | 602313-057 | CEXETHTO9A C ELECTRO ‘SOV IMF RS 511 TAPING ca37_ | 602313-056 | CEXFIHi01V ELECTRO SOV 100MF ASS 8x11.5 c236_ |" 602313-020_ | CCxB2H102K C CERA. HIKB 500V_1000PF K TAPING c239 | 602313-060_ | CEXD1HA7OF C ELECTRO ‘SOV 4.7MF AND 6.3 x11 cat 602313-045 | CEXEET09A C ELECTRO 250V 1MF RS 8x 11.5 TAPING C301 | 602313-069 | cMxB2A104/ ‘MYLAR 100V0.1MF J TAPING c302_[602313-068 | CMXM2Ai04s —_|_C MYLAR 400V_O.1MF J (ED) 304 [602313-068 | CMXM2A104) |G MYLAR 100V 0.1MF J TAPING 30s 602313-068 | CMXM2A104J | C MYLAR. 100V O.1MF J TAPING C306 602313-047 | CEXEE470A C ELECTRO 25V 47MF RS 6.3 x11 TAPING C307 | 602313-048 | CEXFIvt02v (C ELECTRO '35V 1000MF RSS 13%25 ¢308 | 602313-049_ | CEXFIVIOIV (C ELECTRO 35V 100MF RSS 8x11.5 ‘309 | 602313-053 | CEVE1V471C. C ELECTRO ‘35V_470MF RU 13x25 cai [602313-061 | CEVE1J470A C ELECTRO (63V_47MF RS 10x12.5 32 | 602313-194 | CEXETH100A. C ELECTRO ‘SOV 10MF RS 5x 11 TAPING 332 | 602313-038 | CEXE1C1004 C ELECTRO 16V_10MF RS 5x11 TAPING c333__ | 602313-068 | CMXM2A104) —_|_C MYLAR 100V 0.1MF J TAPING 334 | 602313-029 | CcxFIH103z, C CERA, HIKF SOV 0.01MF Z TAPING c335 | 602313-057 | CEXETHT09A (C ELECTRO ‘SOV 1MF RS 5x11 TAPING caor_ | 602313-076 | crxp1v228k (CTANTAL '35V_0.22MF K TAPING cao | 602313-076 | cTxD1V228K. CTANTAL '35V_0.22MF K TAPING cas |" 602313-041 | CeVFICaTIV C ELECTRO 16V_470MF RSS 102.5 cao4 | 602313-029 | CoKFIH103Z C CERA, HIKF SOV 0.01MF Z TAPING .caos | 602313-065 | CMXM2A223K__|_C MYLAR 100V 0.022MF K TAPING ‘cao6 | 602313-065 | CMxM2A223K | C MYLAR. 100V 0.022MF_K TAPING cao7 | 602313-065 | cmxmzaz23K__ | C MYLAR. 100V 0.022ME K TAPING: cao | 602313-065 | cmxmzaz2aK__ | C MYLAR. 100V_0.022MF K TAPING Cao | 602313-065 | cMxM2az23K_—[_C MYLAR. 100V 0.022MF K TAPING caso | 602313-065 | cmxm2az23k_[_C MYLAR 100V 0.022MF K TAPING. cai1 | 602313-038 | CEXE1C1008. C ELECTRO 16V TOMF RS 5x11 TAPING cai2 | 602313-050 | CEXE1V479A. C ELECTRO '35V_4.7MF RS 5x17 TAPING ca13 | 602313-057 | CEXE1H109A. G ELECTRO SOV IMF RS 5x11 TAPING cai4[602313-040 | CEXE1C2208 (C ELECTRO 16V 22M RS 5x11 TAPING cas | 602313-040_| CEXE1C2208 (C ELECTRO 16V 22MF RS 5x11 TAPING 32Loc CBM PN OEM-CODE PART-NAME_ PART-DESC C416. 602313-076. CTXD1V228K_ C TANTAL 35V 0.22MF K TAPING C417, 602313-043_ CEXE1C470A_ C ELECTRO 16V_47MF RS 6.3x 11 TAPING C418 602313-070 CMXM2A104K_ C MYLAR 100V_0.1MF K TAPING C419 602313-065 CMXM2A223K_ C MYLAR 100V_0.022MF _K TAPING ‘C420 | 602313-065__| CMXM2A223K__|C MYLAR 100V 0.022ME K TAPING C421 602313-036, CEXF1C102V. C ELECTRO 46V_1000MF RSS 10x20 C422 602313-029 CCXF1H103Z C CERA. HIKF 50V_0.01MF Z TAPING £423 602313-058 CEXE1H229A_ C ELECTRO ‘50V 2.2MF RS 5x11 TAPING C603 602313-029 CCXF1H103Z CCERA HIKF 50V_0.01MF Z TAPING 604 | 602313-029 | COXFIHT0a7 | _C CERA HIKF 50V_0.01MF Z TAPING, C605 602313-039 CEXF1C221V_ C ELECTRO 46V 220MF RSS 8x 11.5 TAPING (0606 | _602313-065 | CMXM2A223K__[C MYLAR “O0V_0.029ME K TAPING. C607. 602313-026 CCXB1H222K_ CCERA HIKB 50V_2200PF K TAPING. C608, 602313-078 CTXD1V109K_ C TANTAL 35V_1MF_K TAPING C609 602313-029 CCXFIH103Z C CERA HIKF 50V_0.01MF Z TAPING 610. 602313-067_ CMXM2A473K_ C MYLAR 100V_0.047MF_K TAPING C611 602313-077_ CTXD1V338K_ C TANTAL 35V_0.33MF K TAPING C612 602313-010 CXCH1H1000_ C CERA CH 50V_10PF D (TAPING) C613. 602313-079 4850100300 C TRIMMER TZO3R_200F (4-20PF) C614 602313-065 CMXM2A223K_ C MYLAR 400V_0.022MF K TAPING C616. 602313-012 CXCHIH270J C CERA CH 50V 27PF J TAPING C617 602313-010 CXCH1H1000_ C CERA CH 50V_10PF_D TAPING C618 602313-011 CXCHIH120J C CERA CH 50V_12PF J TAPING C619 602313-032 CBXF1H104Z C CERA SEMI HIKF 50V_0.1MF Z TAPING 620 602313-057 CEXE1H109A, C ELECTRO 50V_1MF RS 5x11 TAPING C621 602313-134 CEXE1H100A_ C ELECTRO 50V_40MF RS 5x11 TAPING C624 602313-030 CCXFIH223Z C CERA HIKF 50V_0.022MF Z TAPING 701 602313-032 CBXF1H104Z C CERA SEMI HIKF 50V_0.1MF Z TAPING C702, 602313-032 CBXF1H104Z C CERA SEMI HIKF 50V_0.1MF Z TAPING C703. 602313-042_ CEYEIC471A_ C ELECTRO 46V 470MF RS 10x20 C704 602313-029 CCXF1H103Z C CERA HIKF 50V_0.01MF Z TAPING c7o7 | 602313-044 | CEXFIC470V (C ELECTRO | 16V 47MF RSS 5x11 TAPING C708, 602313-044 CEXF1C470V_ ELECTRO. 16V 47MF RSS 5x11 TAPING C709 602313-044 CEXFIC47OV C ELECTRO 16V 47MF RSS 5 x11 TAPING C74 602313-025 CCXB1H151K C CERA HIKB 50V_150PF K TAPING C712 602313-038 CEXE1C100A C ELECTRO 16V_10MF RS 5x11 TAPING 01 | 602313-055_ | CEXETH108A (C ELECTRO ~[50v0.1MF RS 5x17 TAPING caoti | 602313-055 | CEXETH108A (C ELECTRO ‘S0V0.1MF RS 5x11 TAPING C802, 602313-051 CEYEIV471A C ELECTRO. ‘35V 470MF RS 13x25 C8021 602313-051 CEYE1V471A_ C ELECTRO. 35V 470MF RS 13x25 C803, 602313-068, CMXM2A104J. C MYLAR. JO0V 0.1MF J TAPING C8031 602313-068, CMXM2A104J C MYLAR 400V 0.1MF J TAPING C805, 602313-057 CEXE1H109A C ELECTRO 50V_1MF RS 5x 11 TAPING C8051 602313-057_ CEXE1H109A C ELECTRO 50V_1MF RS 5x11 TAPING C806. 602313-031 CCXFIH473Z C CERA HIKF 50V_0.047MF Z TAPING C8061 602313-031 CCXFIH473Z C CERA HIKF 50V 0.047MF Z TAPING C307, 602313-037_ CEXEIC101A C ELECTRO. 16V 100MF RS 8x 11.5 33LOC CBM PN__|OEM-CODE PART-NAME PART-DESC. coos | “602813-027 | “coxeiHz2ik | C CERA HIKB SOV 220PF K TAPING ceost | 602313-027 | coxB1H221K | _C CERA HIKB SOV 220PF K TAPING ceoa | 602313.064 | CMXM2A103/ | C MYLAR “100V 0.07MF J TAPING ceoot_|602313-064 | CMXM2A103s | C MYLAR 100V 0.01MF_J TAPING e810 | 602313-049 | CEXFIVi01V ELECTRO '35V 10OMF RSS 8x 11.5 ce10r_| 602313-049 | CEXFIVi01V C ELECTRO '35V 100MF RSS 8x 11.5 Dy. 602313-104 | 4859240020 CONN WAFER ‘YFWS00-05- L607 | ~602313-068 | 5800000019 COIL DELAY LINE ‘DL040608 L602 | ~602313-090 | 58a0000028 COIL DELAY LINE SO-11PAL (4.493619 MA) A 5800000034 COIL DELAY LINE. ADL-CPI44 A 5804430008 COIL DELAY LINE, PDL-P44KIP (4-43 MHZ) 01 1602813-193_| 4857416100 | PIN B TERM PRES | _BSBPT Dror | 602313-137__| DLBI56— DIODE BRIDGE LB156 1@ D102 |" 602313-129 | D1N4936— DIODE 1N4936 D103 | 602313-129 | 14996-— DIODE, "1N4936, on '602813-087 | ~5MG0000006 | COIL DEGAUSSING | _JD-6085 beo2 | 602313-128 | DZN4148-— DIODE, “[-wa148 AUTO SoM ~~ be03 | 602313-128 | DzNai48— DIODE "1N4148 AUTO 52MM. eos | 602313128 | OZN4148— DIODE 1N4148 AUTO 52MM. eo7 [602313-130 DIODE BAI59 ‘A | 602313133 DIODE RH-1B. D208 | 602313-136 DIODE 52956 A DIODE BAIS? A DIODE RFA A DIODE 1N4936, eit | 602313-136, DIODE '$52956 A DIODE BAIS7 A DIODE RF-1 A DIODE 1NAS36, = borg | 602313128 [oznat4e-— DIODE "1N4148 AUTO SMM = pea | 602313128 | oznav4ae-— DIODE "IN4148 AUTO 52MM > pais | 602313128 DIODE “IN4148 AUTO SMM. > n216 [602313128 DIODE "1N4148 AUTO 52MM D219 | 602313-356 ZENER DIODE 025.18 220 | 602313-138 DIODE ZENER 02128M 221 | 602313-135 DIODE RUS 222 | 602313-135 DIODE RU 223 | 602313-135 DIODE: RUS 224 | 602813-131 DIODE ERCOG-15 0225 | 602313-136 DIODE '$52956 ‘A DIODE BAIS A DIODE RF rN DIODE 1NA936, D301 | 602813-128 DIODE 104148 AUTO S2MN 302 | 602313-130 DIODE BATS D303 | 602313-128 DIODE “1N4148 AUTO 52MM bao | 602313-128 DIODE “N4148 AUTO 52MM. 34ed Loc ‘CBM PN ‘OEM-CODE PART-NAME PART-DESC. Daor | 602313-128 DIODE 4148 AUTO 52MM D402 | 602313-128 DIODE 1N4148 AUTO 52MM. D403 602313-128 DIODE 1N4148 AUTO 52MM. D4o4 | 602313-128 DIODE 1N4148 AUTO 52MM. D405 | 602313-128 DIODE 1N4148 AUTO 52MM. 701 | 602313-128 DIODE “1N4148 AUTO 52MM ‘0703 [602313-128 DIODE "1N4148 AUTO 52MM D704 | 602313-128 DIODE "1N4148 AUTO 52MM 0705 [602313-128 DIODE "1N4148 AUTO 52MM 0706 [ 602313-128 DIODE “1N4148 AUTO 52MM 707 | 602313-128 DIODE “1N4148 AUTO 52MM. Dros | 602313-128, DIODE “1N4148 AUTO 52MM. Dri | 602313-128 DIODE “1N4148 AUTO 52MM. D713 | 602313-128 DIODE “1N4148 AUTO 52MM. D714 | 602313-128 DIODE “1N4148 AUTO 52MM. FA (602313-108, CONN WAFER, ‘YMW-025-05 2.5MM [1@ F101 (602313-148, FUSE ‘SEMKO MF51 4A 250V TL Fro | 602313-149_| 4857475000 FUSE CLIP BSP3-H 70.4 SN 5.2 HOt 602313-162_ | 1STK734102 IC ‘STK73470I1 Towa 602313-154 | 9977015900, HEAT SINK A ‘A1050P-H24 2.0 tows | 602313-301 [7128301411 ‘SCREW TAPPING T2S WAS 3x14 MFZN toiG | 602313-355 WIRE SADALE NYLON 66, [=i@ 201 (602313-166 IC ‘TOA2595, 1202 (602313-172 IC TTL PD74L S86 1301 (602313-165 | 1TDAI675A, IC TOAI675A, 1301 | 602313-144 | 997012301 HEAT SINK SLAT ‘A1050P H24 13018 | 602313-303 | 9976410500 ‘SHAFT ‘SWRM SN PLATE, i301 | 602313-294 [7125300811 ‘SCREW TAPPING 128 FLT 3x8 MFZN 1401 (602313-167 | 1TDA3507~ IC ‘TOAS5O7 1402 602313-170_|1K1A78012- IC KIATO12AP + 12VDC 1A @so2k[602313-157_| 4857013300 HEAT SINK C. ‘SPCC T1.0 SN-3 14028 | 602313-296 | 7121300611 ‘SCREW TAPPING: T25 PAN 3x6 MFZN 1403 (602313-171__|_1K1A7805— IC REGULATOR KIA7BOSAP W4osa | 602313-157 | 4857013300 HEAT SINK C SPCC T1.0 SNS W436 | 602313-206 [7121300611 ‘SCREW TAPPING T2S PAN 3x6 MFZN 1601 602313-168_ | 1TDA4510- IG TDA4510 1602 602313-169__|1UPD40668C IG {UPD4066BC. 1701 602313-173 | 1SN7406— IC TTL 'SN7406 1702 602313-173_|_1SN7406— ICT 'SN7406 1801 602313-163 | 1TDA1013A- IC TOAIO13A, eott | 602313-163 | 1TDA10134- IC TDAI013A, Jt 602313-351 | ws81Gv7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 2 602313-348 | W581GY1005__| WIRE JUMPER ‘AWG22 170.65 SN 10 AUTO 3B 602313-348 | w581GY1005__|_ WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 4 602313-351 | wse1Gv7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO I 602313-351 | wseiGv7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 6 602313-351 | wse1Gv7595__|_ WIRE JUMPER ‘AWG22 110.65 SN 7.5 AUTOEE Loc CBM PN | OEM-CODE PART-NAME PART-DESC Ir 1602313-348 | wse1Gv1005 | WIRE JUMPER ‘AWG22 170-65 SN 10 AUTO 8 1602313-351 | W581GY7595_|_ WIRE JUMPER AWG22 1/0.65 SN 7.5 AUTO 10 1602313-351 | W581GY7595_| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO J 602313-351 | W581GY7595__|_ WIRE JUMPER ‘AW22 110.65 SN 7.5 AUTO 13 602313-349 | ws81GV125 | WIRE JUMPER ‘AW22 110.65 SN 12.5 AUTO 14 602313-349 | W581GV125 [WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 5, 602313-348 | w581GV1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 16, 602313-348 | W581GV1005 [WIRE JUMPER ‘AWG22 10.65 SN 10 AUTO id 602313-348 |" W581GV1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 18, 602313-351 | w581GY7595__[_ WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 19 602313-350 |" W581GV17J5 [WIRE JUMPER ‘AWG22 1/0.65 SN 17.5 AUTO 20 602313-350 |" ws8iGVi7J5__| WIRE JUMPER ‘AWG22_1/0.65 SN 17.5 AUTO 22 1602313-351 | _W581GY7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 23. 602313-351 | w581GY7595 [WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 24 602313-348 | w581GY1005__[_ WIRE JUMPER ‘AWG22 10.65 SN 10 AUTO 25 602313-351 | wse1Gv7595__[ WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 28, 602313-351 | ws81GY7595 [WIRE JUMPER ‘AWG22 10.65 SN 7.5 AUTO 30) 602313-351 | W581GY7595 [WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 31 602313-348 | W581GV1005 [WIRE JUMPER ‘AWG22_1/0.65 SN 10 AUTO 32. 602313-348 |" ws81GV1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 33, 602313-349 | W581GV12N5 WIRE JUMPER ‘AWG22_1/0.65 SN 12.5 AUTO 34 1602313349 | W581GY12I5__| WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 35 1602313-349 | W581GY12I5 | WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 36 1602313-347 | w581GY1505 [WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO 37 602313-349 | wse1Gv125 [WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 138 602313-349 | ws81GY125 [WIRE JUMPER ‘AWG22 10.65 SN 12.5 AUTO 39) 602313-349 |" W581GY125 | _WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 40. 602313-349 | W581GY12N5 WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO Jat 602313-349 | W581GY12J5 WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 42 | 602313-351_ | ws81Gy7s95__|_WIRE JUMPER ‘AW22_1/0.65 SN 7.5 AUTO 43, 602313-351 | ws81GY7595 [WIRE JUMPER ‘AW22_1/0.65 SN 7.5 AUTO aa 602313-348 | w581GY1005 | WIRE JUMPER ‘AW22 1/0.65 SN 10 AUTO 5 602313-348 | w581GY1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 46 1602313-351__ | w581GV7595__| WIRE JUMPER ‘AWG22 10.65 SN 7.5 AUTO a7 602313-351_ | wse1GY7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 49 602313-348 | w581GY1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 150 602313-349_ | W581GY125 | WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 5 602313-348 | w581GV1005 | WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 52 602313-349 | wse1Gv12J5 [WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 53, 602313-349 | W581GY12N5 WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO S54, (602313-349 | W581GV12s5 WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 55, 602313-349 | W581GV12J5 WIRE JUMPER ‘AWG22_1/0.65 SN 12.5 AUTO. 56, 602313-348 | ws81Gv1005__ [WIRE JUMPER ‘AW22 1/0.65 SN 10 AUTO 57 602313-349 | ws81GV12J5 | WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 58, 602313-347 | w581GY1505__ |" WIRE JUMPER ‘AWG22 110.65 SN 15 AUTO 58, 602313-349 | W581GV12J5 | WIRE JUMPER ‘AWG22 1/0.65 SN 12.5 AUTO 62 602313-348 | wseiGvi005 [WIRE JUMPER ‘AWG22 10.65 SN 10 AUTO 36SSS Loc ‘CBM PN | OEW-CODE PART-NAME. PART-DESC 63, 1602313-349 | W581GV12/5 WIRE JUMPER, ‘AWG22 110.65 SN 12.5 AUTO 64. 602313-349 | W581GV12J5 [WIRE JUMPER. ‘AWG22 1/0.65 SN 12.5 AUTO 65 (602313-348_ | W581GY1005 | WIRE JUMPER. ‘AWG22_1/0.65 SN 10 AUTO 66 602313-348 | W581GY1005 | WIRE JUMPER. | AwG22 770.65 SN 10 AUTO 67, 1602313-348 | w581GY1005 | WIRE JUMPER. ‘AWG22 1/0.65 SN 10 AUTO. 68. 1602313-351 | W581GY7595__ | WIRE JUMPER ‘AWG22 110.65 SN 7.5 AUTO 69) 1602313-351 | W581GY7595__ |" WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 70 602313-347 | W581GY1505__ | WIRE JUMPER ‘AWG22_1/0.65 SN 15 AUTO a7 602313-347 | W581GY1505__| WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO S72. 602313-347 | W581GY1505__| WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO 73, (602313-348 |” W581GY1005 WIRE JUMPER, ‘AWG22 1/0.65 SN 10 AUTO 75, 602313-348 | W581GY1005, WIRE JUMPER. ‘AWG22_1/0.65 SN 10 AUTO 76. 602313-348 | W581GY1005 WIRE JUMPER. ‘AWG22_1/0.65 SN 10 AUTO a 602313-348 | w581GY1005 |" WIRE JUMPER ‘AWG22_1/0.65 SN 10 AUTO S78 602313-349 | W581GY12J5 [WIRE JUMPER. AWG22 110.65 SN 12.5 AUTO 79 1602313-347 | W581G1505__|_WIRE JUMPER, ‘AWG22 1/0.65 SN 15 AUTO 80. 602313-347 | W581GY1505__ | WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO 81 602313-347 | W581GY1505 | WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO 82, 602313-349 | WS81GY12J5 WIRE JUMPER, ‘AWG22_1/0.65 SN 12.5 AUTO 83, 602313-350 | W581GY17J5, WIRE JUMPER, ‘AWG22_1/0.65 SN 17.5 AUTO 85, 602313-348 | W581GY1005__ |" WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO. 86, 602313-351 | W581GY7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 88, 602313-348 | W581GY1005 | WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 89, 602313-347 | W581GY1505 WIRE JUMPER. ‘AWG22 1/0.65 SN 15 AUTO 90) 602313-351 | W581GY7595__| WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 91 602313-348 | W581GY1005 | WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 92 602313-348 | W581GY1005 |" WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO 193 602313-348 | w581GY1005 | WIRE JUMPER AWG22 1/0.65 SN 10 AUTO 94 602313-348 | ws8iGY1005 | WIRE JUMPER ‘AW22 1/0.65 SN 10 AUTO. 95 602313-350_ | wseiGY17J5 | WIRE JUMPER ‘AWG22 1/0.65 SN 17.5 AUTO 96 602313-351_ | wS81GY7595 | WIRE JUMPER, ‘AW22 1/0.65 SN 7.5 AUTO 97 602313-351 | W581GY7595__|_ WIRE JUMPER ‘AWG22 1/0.65 SN 7.5 AUTO 98, (602313-349 | WS81GV12J5 WIRE JUMPER, ‘AWG22 110.65 SN 12.5 AUTO 99 602313-348 | W581G1005__ | WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO Ji09 | 602313-347 | w561GV1505__| WIRE JUMPER ‘AWG22 1/0.65 SN 15 AUTO Jior | 602313-351 | ws81Gy7595__| WIRE JUMPER. ‘AWG22 1/0.65 SN 7.5 AUTO ‘S102 | 602313-348 | ws81Gy1005 | WIRE JUMPER AWG22 1/0.65 SN 10 AUTO. J103 | 602313-349 | W58iGV1205 WIRE JUMPER. AWG22 110.65 SN 12.5 AUTO Jing | 602313-349 | ws8iGv12u5 WIRE JUMPER. ‘AWG22 1/0.65 SN 12.5 AUTO Ji05 | 602313-348 | ws81Gy1005_—_ | WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO ‘Ji06 | 602313-348 | wse1Gv1005 | WIRE JUMPER. ‘AWG22 1/0.65 SN 10 AUTO S107 ~ | 602313-350 | wseiGv17u5 WIRE JUMPER. ‘AWG22 1/0.65 SN 10 AUTO S108 | 602313-347 | wseiGv1505 | WIRE JUMPER. AWG22 1/0.65 SN 15 AUTO Jiog | 602313-347 | wseiGv1505 | WIRE JUMPER. ‘AWG22 1/0.65 SN 15 AUTO. Ji10 | 602313-347 | wseiGv1505 | WIRE JUMPER. ‘AWG22 1/0.65 SN 15 AUTO. Jini | 602313-351_| wseiGv7595__| WIRE JUMPER. ‘AWG22 1/0.65 SN 7.5 AUTO Jira | 602313-351 | wseiGv7595__| WIRE JUMPER, ‘AWG22 1/0.65 SN 7.5 AUTO 37SR Loc CBM PN OEM-CODE PART-NAME_ PART-DESC J113 602313-351 W581GY7595_ WIRE JUMPER. AWG22 1/0.65 SN 7.5 AUTO. S115 602313-350_ WS81GY17J5 WIRE JUMPER AWG22 1/0.65 SN 17.5 AUTO J116__| 602313348 | wse1Gy1005 [WIRE JUMPER. ‘AWG22 10.65 SN 10 AUTO J118 |" 602313-349 |“ wse1Gy12u5 | WIRE JUMPER ‘AWG22 10.65 SN 12.5 AUTO 220 602313-348_ W581GY1005 WIRE JUMPER AWG22 _1/0.65 SN 10 AUTO 1101 602313-143_ SPTLF103E- FILTER LINE TLF-103E, 1102 602313-143 SPTLF103E- FILTER LINE TLF-103E, 1103. 602313-082 5MC0000004 COIL CHOKE CH-101 1106. 602313-082 5MC0000004 COIL CHOKE CH-101 L107, 602313-086 5MC0000003 COIL CHOKE 1-82 1108 602313-083 5MC0000019 COIL CHOKE CH-121 1109 602313-081 5800000026 COIL BEAD HC-4035, * @1202 602313-092 5MH0000037_ COIL H-LINEARITY TAL-1410 L203 | 602313-085 | 50000030, (COIL CHOKE 1-700) L207 | 602313-0e4 | smco000024 | COIL CHOKE CH-146 L601 | 602313-095 | 58P689,023 COIL PEAKING PL-6RBJ (6.80 J) A 56Z689K200 COIL PEAKING ELOGO6RA-6.8UH_K (AUTO) 1602 602313-091 58F1000021 COIL FILTER TRF-M507S (10MH.8) L603 602313-094_ 58P330J045 COIL PEAKING PL-33J (33UH J) A 56Z330J432 COIL PEAKING ELO606RA-330UH-J L604 602313-094 58P330J045 COIL PEAKING PL-33J (33UH J) A 56Z330J432 COIL PEAKING ELO606RA-330UH J L701 602313-081 5800000026 COIL BEAD HC-4035 1702 602313-081 5800000026 COIL BEAD HC-4035, 1703 602313-081 5800000026, COIL BEAD HC-4035, 1704 602313-081 58C0000026, COIL BEAD HC-4035, Nd 602313-106 97P6262800 CONN WAFER YMW-025-03 2.5MM_ PR 602313-196. 9970700609 POWER RECEPTACLE AS | NC174+UL1015#22 + CORE = 150 PROT 602313-194 DERPZ5180A_ POSISTOR ERP-Z5BON180A A D901P44180_ POSISTOR 901P44E180YR16 0201 602313-338_ TZTC2482— TR KTC2482 (AUTO) | @ 0202 602313-328 72801401 TR 2801401 (WITH MICA) A 602313-329 T2SD1555-— TR 2SD1555_ A 602313-330_ T2SD1883-— ™ 2SD1883_ 02024, 602313-153 9977015800 HEAT SINK A A1050P-H24 T1.0. 02028 602313-300_ 7128301211 SCREW TAPPING T2S WAS 3x12 MFZN ‘arozé | 602313-174 | 9977610800 INSULATOR SILICON RUBBER 0.3 0203 602313-336, TZ1C1815Y- TR KTC1815-Y (AUTO) 0301 602313-334 TKTB834- TR KTB834_ A 602313-331 TB988— TR 8988. 0302 602313-336, TZTC1815Y- TR KTC1815-Y (AUTO) 401 602313-336, TZTC1815Y- TR KTC1815-Y (AUTO) 0601 602313-336, TZIC1815Y- TR KTC1815-Y (AUTO) 0602 602313-336_ TZTC1815Y- TR KTC1815-Y (AUTO) 0604, 602313-336_ TZIC1815Y- TR KTC1815-Y (AUTO) 0605 602313-336_ TZTC1815Y- TR KTC1815-Y (AUTO) 0606 602313-336_ TZTC1815Y- TR K1C1815-Y (AUTO) 38Loc ‘CBM PN | OEM-CODE PART-NAME, PART-DESC ‘a7o1 | 602313.337_ | TZTC1959y- ik KTC1959-¥ (AUTO) ‘a702 | 602313-337_ | TZTCi959V- TR. KTC1959-¥ (AUTO) ‘0703 | 602313-337_|_TzTC1959v- TR KTC1959-¥ (AUTO) @a704 | 602313327 | T2803337— TR. 2803337 Rio1__| _602313-201__[RD.272005)- R CARBON FILM Ye 2.2M OHM J R102 | 602313-271_[ RX10B33QE R CEMENT “10W 3.3 OHM J BENCH 12.5MM R105 | 602313-219 | RD-42154J- R CARBON FILM 4 150K OHM J i@rios | 602313260 | RSO2Y109/- RM-OXIDE FILM. 2W 4 OHM J) t@ Rio7__[602313-272 | RSOSBI01JE RM-OXIDE FILM, SW 100 OHM J BENCH 12.5MM Rios | 602313-204 | RD-27470s- RCARBON FILM Ye 47 OHM J @riog | 602313.279 | Rs02v1015- RM-OXIDE FILM, 2W 100 OHM J R110 | 602313-197 | RD-27704- R CARBON FILM Ye 100K OHM J ivi | 602313-197 | RD-27104J- R CARBON FILM ‘Ve 100K OHM J R113 | _602313-275 | RFOTY109- R FUSIBLE 14 OHM J t@ri4 {602313-283 [| Rso2v330N- RM-OXIDE FILM, 2W 33 OHM J R16 | 602313-218 | RD-4Z151J- CARBON FILM. 150 OHMS R202 | 600313-244 | RD-47493- R CARBON FILM. 4 43K OHM J R203 [ 602313-342 | 5V71030168. ‘VR ROTARY, VO12L-PHJ-20F-10KB R204 | 602313-225 | RD-47272J- R CARBON FILM 2.7K OHM J R205 | 602313-217 | RD-47123J- R CARBON FILM Yh 12K OHM J R206 | 602313-228 | RD-47221J- R CARBON FILM 4 220 OHM J R207 | 600313-237 | RD-42331J- CARBON FILM % 330 OHM J. R209 | 602313-242 | RD-47472J- R CARBON FILM 4 4.7K OHM J @rei0 | 602313-281_ | Rs02v122- RM-OXIDE FILM, 2W 1.2K OHM J @ron | 602313-281_ | Rs02v1224- RM-OXIDE FILM. 2W 1.2K OHM J Riz | 602313-27 | Rso1y229u- RM-OXIDE FILM, iW 2.2 OHM J R213 | 602313-237 | RD-47331J- R CARBON FILM Ye 330 OHM J = Re17__ | 602313-249_ | RD-475626- R CARBON FILM %4 5.6K OHM 6 = Re18[602313-213 | RD-421036- R CARBON FILM 10K OHM G. Treg | 602313-199 | RD-27184- R CARBON FILM Ye 180K OHM J R220 [602313-214 | RD-4Z103.- R CARBON FILM. Ye 10K OHM J Reet | 602313-283 | RD-AZ2714- R CARBON FILM. % 270 OHM J 22 | 602313-26 | RD-42200J- R CARBON FILM Ye 20 OHM J a24 | 602313-215 | RD-AZ124J- 'R-CARBON FILM 120K OHM J R225 | 602313-286 | RV6317503A SEMI FIXED. CET 95A 50K OHM B 226 | 602313-217 | RD-47123- R CARBON FILM a 12K OHM J t@re27 | 602313-284 | RSOBY182J- R M-OXIDE FILM '3W_1.8K OHM J t@ R226 | 602313-284 | RSOBY182J- RM-OXIDE FILM. ‘3W_1.8K OHM J R229 | 602313-212 | RD-4Z104J- 'R-CARBON FILM Yh 100K OHM J R230 | 602313-242 | RD-4Z472s- R CARBON FILM. 4.7K OHM J Rest | 602313-261_ | RD-4Z8214- R CARBON FILM % 820 OHM J R232__| 602313-256 | _AD-4Z681- R CARBON FILM 1% 680 OHM J R233__| 602313-275_|_RFOIY10W- R FUSIBLE 1W4 OHM J R234__| 602313-275_|_RFOIY100- R FUSIBLE 1W1 OHM J R235 | 602313-198 | RD-27153J- R CARBON FILM. Ye 15K OHM J R237 | 602313-276 | RSOTY109J- RM-OXIDE FILM V1 OHM J = R238 | 602313-210 | RD-4Z100- R CARBON FILM Ve 10 OHM J 39LOC ‘CBM PN ‘OEM-CODE PART-NAME PART-DESC R29 | 602313-274 | RFOTY478L- RFUSIBLE IW 0.47 OHM J R243 | 602313-237 | RD-4Z331- R CARBON FILM ¥e 330 OHM J Read | 602313-245 | RD-AZA7 1 R CARBON FILM. ‘470 OHM J R245 | 602313-245 | RD-AZ471J- R CARBON FILM. e470 OHM J R246 | 602313-228 | RD-AZ221N- R CARBON FILM. Ve 220 OHM J R247 | 602313-238 | RD-473630- CARBON FILM, Ve 36K OHM J R249 | 602313-214 | RD-AZ103- R CARBON FILM, a 10K OHM J R250 _ | 602313-242 | RD-42472J- R CARBON FILM, Me 4.7K OHM J R251 | 602313-253 | RO-4Z561J- R CARBON FILM Ye 560 OHM J R252 | 602313-253 | RD-47561J- R CARBON FILM Ye 560 OHM J 253 | 602313-242 | RD-47472N- R CARBON FILM Me 4.7K OHM J R255 | 602313-238 | RD-47363- R CARBON FILM ¥%e 96K OHM J R256__|602313-250 |" RD-27562u- R CARBON FILM, 7h 5.6K OHM J Re57__|602313-277 | RSO1Y2205- RLM-OXIDE FILM. IW 2.2 OHM J R258 | 602313-207 | RD-27303- R CARBON FILM YAW 30K OHM J R260 | 602313-278 | RSO1Y680J- RM-OXIDE FILM. W 68 OHM J R301 | 602313-223 | RD.47229)- R CARBON FILM Ye 2.2 OHM J R303 | 602313-242 | RD-47472u- R CARBON FILM 4 4.7K OHM J R304 | 602313-267 | RO-AZ273J- R CARBON FILM 116 27K OHM J R305 | 602313-216 | RD-4Z124)- R CARBON FILM 4 120K OHM J R306__| 602313-340 | 5V11043028 VR ROTARY Vi2v CO 25K B100K R307 | 602313-257_ | RD.47684)- R CARBON FILM Ya 680K OHM J R308 | 602313-145 | RO-47683)- R CARBON FILM he 68K OHM J R309 | 602313-247 | RD-42473/- R CARBON FILM. he 47K OHM J aio | 602813-200 | RD-27229J- R CARBON FILM. Ye 2.2 OHM J Ratt | 602313.263 | RD-4Z911J- R CARBON FILM. ‘4 910 OHM J R312 | 602313-215 | RD-AZ121J- R CARBON FILM. a 120 OHM J) R313 | 602313-224 | RD-47240J- R CARBON FILM. Ya 2.4K OHM J Rata | 602313-214 | RD-42103N- R CARBON FILM. 10K OHM J R3i5 | 602313-259 | RD-47753J- CARBON FILM. TSK OHM J R3i6 | 602313-214 | RD-4Z103J- R CARBON FILM. ‘10K OHM J R317] 602313-146 | RD-AZ331J- CARBON FILM 1/6 330 OHM J R318 | 602313-341 | 5V11023028, ‘VR ROTARY, Vi2V CO 25K BIK R319 | 602313-147 | RD-22331u- R CARBON FILM. Ye 330 OHM J R320 | 602313-247 | RD-42473J- CARBON FILM 4 47K OHM J c323_ | 602313-285 | RV63172034. SEMI FIXED CET 95A 20K OHM B R328 | 602313-254 | RD-47622- R CARBON FILM he 6.2K OHM J R330__| 602813.214 | RD-47103J- R CARBON FILM Ye 10K OHM J R331_|602813.211_|_RD-4Z101J- R CARBON FILM Ye 100 OHM J R332_ | 602313-259 | RD-4Z753J- R CARBON FILM. ve 75K OHM J R333 | —602313-246 | RD-4Z474J- CARBON FILM 470K OHM J R334 | 602313-348 | w581GY1005 [WIRE JUMPER ‘AWG22 1/0.65 SN 10 AUTO R335__| 602313-216_| _RD-47124J- R CARBON FILM Yu 120K OHM J R336__| 602313-222 | RD-47102J- R CARBON FILM Ye_1K OHM J. R337__| 602313-344 | 5V11033028. ‘VR ROTARY Vi2V CO 25K B10K aot | 602313-255 | RD-47680.- R CARBON FILM. a 68. OHM J Rao2 | 602313-255 | RD-47680J- CARBON FILM. h 68 OHM J 40LOC CBM PN, ‘OEM-CODE PART-NAME, PART-DESC R403 | 602313-255 | RD-4Z680J- R CARBON FILM. Th 68 OHM J R404 | 602313-222 | AD-4z102- R CARBON FILM. Va 1K OHM J R405 | 602313-202 | RD-4Z1024- R CARBON FILM. Va 1k OHM J R406 | 602313-222 | RD-4z102- R CARBON FILM. Ya 1K OHM J R407 | 602313-202 | RD-4z102- R CARBON FILM. atk OHM J Rag | 602313-214 | RD-4Z103.- R CARBON FILM, a 10K OHM J aoa | 602313-202 | RD-4z102- R CARBON FILM 1K OHM J aio | 602313-202 | RD-4z102- R CARBON FILM 1K OHM J Rai | 600313-247 | RD-4z473- CARBON FILM. a 47K OHM J a2 600313-287 | RV6117103A R SEMI FIXED. (CET 117A 10K OHM B Rai3__| 600313-267 | RV6117103A R SEMI FIXED. (CET 117A 10K OHM B Rar | 602313-287 | RV6117103A R SEMI FIXED. CET 117A 10K OHM B aig | 602313-214 | RD-42103)- R CARBON FILM. ‘va 10K OHM J Rat? | 602313-214 | RD-47103J- CARBON FILM a 10K OHM J. Rate | 602313-260 | RD-47822J- CARBON FILM A 8.2K OHM J Rag | 602313-214 | RD-47103J- CARBON FILM. Ve 10K OHM J R420__| 602313-343 | 6V11030178 ‘VR ROTARY, ‘VOI2L-PHJ-20F-B10K (6.6) Ra2i__| 602313-343 | 6V11030178 VR ROTARY \VOI2L-PHJ-20F-B10K (C.C.) Ra22__| 602313-343 | 5V11030178 VR ROTARY ‘VO12L-PHJ-20F-B10K (C.C.) Ra23_|602313-241 | RD-42393- R CARBON FILM. 4 39K OHM J Raza | 602313-270 | RD-AZB23- ALCARBON FILM. Va 82K OHM J Ra25 | 602313-250 | RD-4Z562J- RCARBON FILM a 5.6K OHM J 426 | 602313-268 | RD-AZ473J- R CARBON FILM. 16 47K OHM J R427 | 602313-220 | AD-4z153- R CARBON FILM Ve 15K OHM J R428 | 602313-242 | AD-Az472J- R CARBON FILM, Va 4.7K OHM J Raza 602313-236 | RD-4Z3924- CARBON FILM, Va 3.9K OHM J Rago | 602313217 | AD-4Z123- CARBON FILM, Va 12K OHM J asi | 602313214 | RD-471031- CARBON FILM, Va 10K OHM J eas2__|602313-205 | AD-4z272u- R CARBON FILM, Va 2.7K OHM J R433 | 602313-260 | AD-42822- CARBON FILM, a 8.2K OHM J asd | 602313-236 | AD-47392J- CARBON FILM, a 3.9K OHM J Rags | 602313-232 | AD-4Z270J- R CARBON FILM. 27 OHM J Rag6__| 602313-250_| _AD-47562J- R CARBON FILM. Me 5.6K OHM J Ras7__| 602313-227 | AD-42201J- CARBON FILM, % 200 OHM J Reoi | 602313-216 | AD-4z124J- R CARBON FILM 4 120K OHM J Re02__| 602313-288 | RV6317201A SEMI FIXED. (CET-95A 200 OHM R603 | 602313-221 | AD-42181J- R CARBON FILM. % 180 OHM J Re04__| 602313-240 | AD-47391- R CARBON FILM ¥% 390 OHM J Re05__| 602313-208 | RD-4z122J- CARBON FILM. Yi 1.2K OHM J R06 | 602313-205 | AD-4Z272J- CARBON FILM Vi 2.7K OHM J Ret | 602313-248 | RD-4Z512- R CARBON FILM. Ve 5.1K OHM J Rei2 | 602313-214 | RD-4zZ103- R CARBON FILM. Ve 10K OHM J R613 | 602313-245 | RD-AZA7 IN. CARBON FILM 470 OHM J Reig | 602313-202 | AD-4z1024 R CARBON FILM, a 1k OHM J. R617 | 602313262 | RD-AZB21U- R CARBON FILM, i 820 OHM J Reis | 602313245 | RD-AZATI R CARBON FILM. a 470 OHM J Reig | 602313212 | _RD-4Z104J- CARBON FILM, Ve 100K OHM J aES EEE Loc CBM PN OEM-CODE | PART-NAME_ PART-DESC_ R620 602313-214 RD-42103J- R CARBON FILM. Ye 10K OHM J Reet | 602313-202 | RD-4z102J- R CARBON FILM 1K OHM J R622 al 602313-236_ RD-42392J- R CARBON FILM. Ye 3.9K OHM J R623 602313-211 RD-42101J- R CARBON FILM. Ye 100 OHM J R624 602313-269 RD-AZ821J- R CARBON FILM. 41/6 820 OHM J R625, 602313-216 RD-42124J- R CARBON FILM. Ye 120K OHM J R626 602313-217 RD-42123J- R CARBON FILM. Ya 42K OHM J R627_ 602313-217 RD-42123J- R CARBON FILM. Ya 12K OHM J R626 | 602313-216 | _AD-4Z124- R CARBON FILM 4 120K OHM J R629 | 602313-217 | _AD-4Z123J- CARBON FILM 4 12K OHM J R630. 602313-216, RD-42124J- R CARBON FILM. Ya 120K OHM J Rea | 602313-211_ | AD-AZ101N- CARBON FILM 100 OHM J R632 —t 602313-234_ RD-42273J- R CARBON FILM Ve 27K OHM J R633. 602313-242 RD-42472J- R CARBON FILM. Ve 4.7K OHM J R634 602313-234_ RD-4Z273J- R CARBON FILM. Ve 27K OHM J R635. 602313-242_ RD-42472J- a R CARBON FILM V4 4.7K OHM J R638 602313-222 RD-42102- R CARBON FILM a 4K OHM J R639_ 602313-222 RD-42102J- R CARBON FILM. 4K OHM J R640 602313-222 RD-4Z102J- R CARBON FILM Ya 1K OHM J R641 602313-258 RD-4Z750J- R CARBON FILM. 4 75 OHM J R642. 602313-258, RD-4Z750J- R CARBON FILM a 75 OHM J R644 | 602313-228 RD-42221J- R CARBON FILM Ye 220 OHM J R645 602313-214 RD-42103J- R CARBON FILM Ve 10K OHM J R646 602313-214 RD-4Z103J- T R_ CARBON FILM. Ve 10K OHM J R648 602313-245, RD-4Z471J- R CARBON FILM. Ve 470 OHM J R649 602313-209 RD-4Z152J- R CARBON FILM. Ye 1.5K OHM J R701 602313-237_ RD-4Z331J- R CARBON FILM. % 330 OHM J R702, 602313-237_ RD-42331J- CARBON FILM. Ys 330 OHM J R703. 602313-237_ RD-42331J- R CARBON FILM. Ys 330 OHM J R704 602313-245, RD-42471J- R CARBON FILM Ys 470 OHM J R705 602313-245_ RD-42471J- R CARBON FILM. Ys 470 OHM J R706, 602313-245 RD-4Z471J- R CARBON FILM Ve 470 OHM J R707, 602313-237_ RD-42331J- R CARBON FILM VY 330 OHM J R708 602313-245 RD-42471J- R CARBON FILM Ya 470 OHM J R709 602313-237 RD-427331J- R CARBON FILM Ya 330 OHM J R710. 602313-237_ RD-42331J- R CARBON FILM. Ya 330 OHM J R711 602313-237_ RD-4Z331J- R CARBON FILM. Ya 330 OHM J R712 | 602313-237 | RD-AZ331- R CARBON FILM ¥% 330 OHM J R713 602313-237_ RO-42331J- R CARBON FILM. Ye 330 OHM J R714 602313-227_ RD-42201J- R CARBON FILM. M% 200 OHM J R715 602313-227_ RD-42201J- R CARBON FILM. Ya 200 OHM J R716 602313-227_ RD-42201J- R CARBON FILM. V4 200 OHM J R77 602313-211 RD-4Z101J- R CARBON FILM. 4 100 OHM J R718 602313-261 RD-42820J- R CARBON FILM V4 82 OHM J R719. 602313-256_ RD-42681J- R CARBON FILM ¥4 680 OHM J R720, 602313-243 RD-42431J- R CARBON FILM. Ya 430 OHM J R724 602313-243 RD-42431J- R CARBON FILM Ya 430 OHM J 42Loc CBM PN OEM-CODE PART-NAME PART-DESC R722. 602313-243 RD-42431J- R CARBON FILM. Ye 430 OHM J R723. 602313-221 RD-4Z181J- R CARBON FILM. Ya 180 OHM J R724 602313-221 RD-4Z1810- R CARBON FILM. Ya 180 OHM J R725, 602313-221 RD-42181- R CARBON FILM. Va 180 OHM J R726. 602313-243 RD-42431- R CARBON FILM Ys 430 OHM J R727, 602313-243 RD-42431J- R CARBON FILM. Ys 430 OHM J R728. 602313-243 RD-42431J- R CARBON FILM. 4 430 OHM J R729 602313-222 RD-4Z102J- R CARBON FILM Ya 1K OHM J R730, 602313-222 RD-42102J- R CARBON FILM Ya 1K OHM J evi | 602313-299|RO-4Z100N- R CARBON FILM i 1K OHM J R735, 602313-218 RD-421510- R CARBON FILM Ye 150 OHM J R736, 602313-218 RD-4Z1514- R CARBON FILM a 150 OHM J R737_ 602313-218 RD-42Z1514- R CARBON FILM Ye 150 OHM J R738. 602313-262 RD-42821J- R CARBON FILM ¥ 820 OHM J R739. 602313-262 RD-42821J- R CARBON FILM Ye 820 OHM J R740__| 602313-262_| RD-AZB21N- CARBON FILM. Ve 820 OHM J Brat [602313243 | RO-AZ43 1. CARBON FILM i 430 OHM J R742. 602313-243, RD-42431J- R CARBON FILM. ‘Ve 430 OHM J R743 602313-243, RD-42431J- R CARBON FILM ‘Ye 430 OHM J R744 602313-273, RXOSB300JE R CEMENT 5W_30 OHM J BENCH R745, 602313-158_ RD-AZ241J- R CARBON FILM. 1/6 240 OHM J Reo | 602313-247 | RD-4Z4734- R CARBON FILM a ATK OHM J R8011 602313-247_ RD-42473J- R CARBON FILM Me 47K OHM J R802 602313-235, RD-47339J- R CARBON FILM a 3.3 OHM J R8021 602313-235_ RD-4Z339J- R CARBON FILM “a 3.3 OHM J R803 602313-229 RD-42224J- R CARBON FILM. Me 220K OHM J eos | 602913-209 | RD-47224)- CARBON FILM 4 220K OHM J R805. 602313-348, W581GY1005_ WIRE JUMPER AWG22 1/0.65 SN 10 AUTO. R806. 602313-342 5V11030168 VR ROTARY. O12L-PHJ-20F-10KB R807 602313-214 RD-42103J- R CARBON FILM. Va 10K OHM J R808 602313-214 RD-42103J- R CARBON FILM. Ve 10K OHM J R8081 602313-214 RD-42103J- R CARBON FILM. Ve 10K OHM J R810. 602313-214 RD-42103- R CARBON FILM Ye 10K OHM J R8101 602313-214 RD-42103J- R CARBON FILM. Va 40K OHM J SW1 602313-319 5840402538. SW PUSH AC-2P_KPA-4251A. sw2— | 602313318 | _5s40402572 | SW PUSH 20-2 KPA-2051SP. sw3 | 602313-318 | 5s40402572__ | SW PUSH 20-2 KPA-2051SP swa | 602313-320 | ssa0207054 | Sw PUSH MESA SWS. 602313-318, 5840202572 SW PUSH 2C-2P KPA-2251SP TAY 602313-103, 9916200602 CONN D-SUB 9P FEMALE W/HOOK. Ta2 | 602313:005 | 9976300023 BOARD JACK 4P DA-SPF “!@T121 602313-306_ 5RM0000030_ SMPS. TSW-4210A, A 5RM0000035_ SMPS. TSW-42108 T201 602313-339_ 5RD0000004 TRANS H-DRIVE_ THD-122 “!@ T202 602313-141 5RH0000033_ FBT DCF-1580 (B) UAOT 602313-187_ 9979800226 PCB MAIN 11.6 x 330 x 247 X601 602313-142, S5PHC18U— FILTER CRYSTAL 8.867238 MHz PHC-18U_ 43eS eS SE Loc | CBM PN. (OEM-CODE. PART-NAME. PART-DESC. ‘0001 | “602313-308 | 2193100800. ‘SOLDER BAR ‘SN: PB= 63% ‘ooo2 | 602313-308 | 2193010801 ‘SOLDER WIRE, ‘SN: PB=63:37 1.2PI ‘0003 | 602313-159 | 2224050033 ‘SLICON RTV252 ‘0004 | 602313-160 | 2224050002 HOT MELT 732-RTV BOND ‘0005 | 602313-161_ | 2291050610 FLUX SOLDER 4662, ‘0005 | 602313-164 | UGCT1C1016 PAINT LOCK (GREEN BG oor | 602313-178 | 2701130202 GREASE ‘ASC-100 (0008 | 602313-180 | 2291050303 FLUX SOLVENT H-302, oor | 602313-183 | 8-1H0820BK “TUBE SHRINK ‘AWGO D=8.2MM UL/USA 1 602313-353 | @W-01065RD WIRE LEAD ‘AWG22 1/0.65 RD 1015 1 602313-325 | 4856812001 TIE CABLE NYLON66 DA100 2 602313-354 | 8P-01065YW WIRE LEAD ‘AWG22 1/0.65 YELLOW 1007 3 602313-352 | 8P-01065YW WIRE LEAD ‘AWG22 1/0.65 VELLOW 1007 '300_|602313-009 | 9974811002 BUTTON POWER SW__| ABS BEG 3G GY-2106 310. '602313-290 | 2221080613 RESIN ABS H.N 700 BEG V27578 GY210B 400. ‘602313-007 | 9974211102. BUTTON CONTROL SW| ABS BEG 1G GY-210B 410. (602313-290 | 2221080613, RESIN ABS H.N 700 BEG V27578 GY210B 500, (602313-004 |” 9973310500. BKT REAR ‘SBHGI-A 1273 x50 600, (602313-140 |” 9913115000. FASTENER, 4-401 + TW-A-3 NI WH 700, 1602313-204 | 7125300811 [SCREW TAPPING 125 FLT 3x8 MFZN 800 1602313-293 | 7142400811 SCREW TAPPING. T2S TRS 4x8 MFZN 850 602313-346 | 7402204010. WASHER TOOTHED | M4 EXT TOOTH WH ZING 900 602313-296 | 7128300611 ‘SCREW TAPPING T2S WAS 3x6 MFZN ‘00020 |"602313-186 | 9970190077 PCB CRT AS (CMC-1410PR cso | 602313-027 | CCxB1H221K (C CERA, HIKB 50V 220PF K TAPING e503 | 602313-027_| COXB1H221K C CERA, HIKB 50V 220PF K TAPING c505 | 602313-027 | CCXBIH221K C CERA, HIKB 50V 220PF K TAPING e507 602313-013 | CXCHIH680J C CERA, (CH 50V 68PF J TAPING c506_|602313-189 | CEXFICI01V (C ELECTRO 16V_100MF RSS 6.311 c509_ | 602313-024 | COXBIH103K (C CERA HIKB 50V 0.01MF K 510 | 602313-035 | CEYE2C470A C ELECTRO 160V_47MF RS 16x25 511 | 602813-019 | CCXB2H103K CCERA HIKB 5O0V 0.07MF K_ 512] 602313-043 | CEXE1C47OA C ELECTRO 16V_47MF RS =6.3% 11 TAPING 513] 602313-016 | CCXB3A103K C CERA, HIKF_1KV 0.01MF K 514 | 602313-020 | COXFIHT03Z CCERA, HIKF SOV 0.01MF Z TAPING 515 | 602313-029 | COXFIH103Z CCERA HIKF SOV 0.01ME Z TAPING 516 | 602313-029 | CCXFIH103Z CCERA HIKF SOV 0.01MF Z TAPING Bt 602313-101 | 9970750003, ‘CONN AS: ‘YMHO25 — 05 + YBH — 03 + 1007 =240 sor | 602313-128 | “Dzn4148— DIODE 1N4148 AUTO 52MM 502 | 602313-128 | Dzn4148— DIODE “1N4148 AUTO 52MM 503 | 602313-128 | OZN4148— DIODE 14148 AUTO 52MM. 504] 602313-138 | D0z128M- DIODE ZENER. 0Z128M 505 | 602313-130_ | DBA159- DIODE RAI5S A 602313-133 | DRHTI DIODE HB 501 602313-351_ | wse1Gy7595___ | WIRE JUMPER ‘AWG22 110.65 SN 7.5 AUTO. J502 | "602313-350 | ws8iGY17J5 WIRE JUMPER, ‘AWG22 1/0.65 SN 17.5 AUTO J503 | 602313-348 | wse1Gy1005 | WIRE JUMPER, ‘AWG22 1/0.65 SN 10 AUTO 44a LOC CBM PN OEM-CODE PART-NAME_ PART-DESC $504 602313-349 W581GY12J5, WIRE JUMPER. AWG22 1/0.65 SN 12.5 AUTO. 505, 602313-348 W581GY1005_ WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO. 506. 602313-347 W581GY1505 WIRE JUMPER. AWG22 1/0.65 SN_15 AUTO. 3507 602313-348 W581GY1005 WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO 508 602313-348 W581GY1005 WIRE JUMPER AWG22 1/0.65 SN 10 AUTO 1509 _| _ 602313-348, W581GY1005 WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO 3510 602313-349 W581GY12J5_ WIRE JUMPER AWG22 1/0.65 SN 12.5 AUTO. J511 602313-349 W581GY12J5_ WIRE JUMPER AWG22 1/0.65 SN 12.5 AUTO. J512 602313-348 W581GY1005_ WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO. 1513 602313-350_ WS581GY17J5_ WIRE JUMPER. AWG22 1/0.65 SN 17.5 AUTO. J514 602313-348 W581GY 1005, WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO. J515, 602313-349_ W581GY12J5, WIRE JUMPER. AWG22 1/0.65 SN 12.5 AUTO. J516 602313-349_ W581GY12J5 WIRE JUMPER AWG22 1/0.65 SN 12.5 AUTO J517 602313-348_ W581GY1005_ WIRE JUMPER. AWG22 1/0.65 SN 10 AUTO 1501 602313-093_ 58P220J001 COIL PEAKING PL-22UH J A I 562220201 COIL PEAKING ELO606RA-22UH J 1502 602313-093 58P220001 COIL PEAKING PL-22UH J A 562220J201 COIL PEAKING ELO606RA-22UH J 1503 602313-093 58P220,001 COIL PEAKING PL-22UH J A 562220J201 COIL PEAKING ELOB06RA-22UH J 0501 602313-337_|_TZTC19597- TR KTC1959-Y (AUTO) @ 0502 602313-335 TKTC2068- TR KTC 2068. 0503 602313-338 TZ1C2482— TR KTC 2482 (AUTO) 0504 602313-333 TZTA949Y— TR KTA949-Y_ A TBF423-— TR BF423 0505, 602313-337 TZIC1959Y- TR KTC1959-Y (AUTO) @ 0506 602313-335_ TR KIC 2068 0507, 602313-338_ TR KIC 2482 (AUTO) 0508, 602313-333 TR KTA949-Y A TR BF423 509 602313-337_ TR KTC1959-Y (AUTO) @ 0510 | 602313335 TR KIC 2068, 0514 602313-338_ TR KIC 2482 (AUTO) 0512 602313-333_ TR KTA949-Y_ A TR BF423 0513 602313-332 TZTAIO15Y- TR KTA1015-Y (AUTO) R501 602313-253, RD-42560- R CARBON FILM. Ya 56 OHM J R502, 602313-239 RD-4Z390- R CARBON FILM. Ye 39 OHM J R503 602313-218 RD-4Z151J- R CARBON FILM Ye 150 OHM J '@ R507. 602313-282 RSO2Y362J- R M-OXIDE FILM 2W 3.6K OHM J R508 602313-211 RD-42101J- R CARBON FILM. Ya 100 OHM J R509. 602313-202 RD-22201J- R CARBON FILM. ¥2 200 OHM J R510. 602313-206 RD-22681J- R CARBON FILM. Ye 680 OHM J R511 602313-252 RD-42560J- R CARBON FILM. Ye 56 OHM J R512. 602313-239 RD-42390J- R CARBON FILM. Ya 39 OHM J R513. 602313-218 RD-421514- R CARBON FILM. Ya 150 OHM J 1@ R517 602313-282 RSO2Y362J- R M-OXIDE FILM 2W 3.6K OHM J 45LOG ‘CBM PN ‘OEM-CODE PART-NAME. PART-DESC. R518 | 602313-2117_ | RD-42101J- CARBON FILM ‘% 100 OHM J R519 | 602313.152_ | AD-22471- CARBON FILM Ye 470 OHM J 520 | 602313-206 | RD-27681J- CARBON FILM Ye 680 OHM J R521 | 602313-252 | RD-47560J- R CARBON FILM % 56 OHM J R522 | 602313-239 | RD-47390J- R CARBON FILM % 39 OHM J R523 | 602313-218 | RD-4Z151J- R CARBON FILM 4 150 OHM J i@ Rs27_ | 602313-282 | RSO1V36s- RM-OXIDE FILM ‘2W 3.6K OHM J R528 | 602313-211 | RD-47101J- CARBON FILM % 100 OHM J R529 | 602313-202 |" RD-27201,- CARBON FILM Ye 200 OHM J R530 | 602313-206 |" RD-27681,- R CARBON FILM. ‘Ye 680 OHM J R532 | 602313-256_| RD-4Z681J- CARBON FILM ‘Ve 680 OHM J R534 | 602313-209 | RD-47152J- CARBON FILM ‘Ye 1.5K OHM J R535 | 602313-253 | RD-47561J- R CARBON FILM. ‘Ye 560 OHM J R536__ | 602313-256 | RD-4Z681- R CARBON FILM "Ve 680 OHM J R537 602313-231 | RD-47224J- CARBON FILM Va 240K OHM J sgor_|602313-310 |" ZEw295804A ‘SPARK GAP S23 1KV sgo2—|"602313-310 |" ZEw295e048 ‘SPARK GAP $23 1KV sG03_|"602313-310 | Zew2958048 ‘SPARK GAP $23. 1KV ‘uaoa | "602313-185 | 9979800227 [PCB CRT TH.6x195.5x 83.5 vt 602313-102 | 9970780001 ‘CONN AS: YMHO25 — 08 + 118526 = 280 ‘vs0r__ |" 602313-307 | 9976300007 ‘SOCKET CRT. '3008626 ‘voor | 602313-121 | 9979600053 CRT M34JRW30 x 04 A 602313-118 | 9979600141 CAT, 37SGA54X-TC16 A 602313-120 [9979600041 CRT 2940822-TC1OETHT (M1T1G8) ‘vara | 602313-123 |” 9970710005. ‘CRT GND AS, CMC-1412A GND ASS'Y ‘va018 | 602313-110 | 4859238620 ‘CONN WAFER, ‘YPW500-02 1 602313-325 | 4856812001 TIE CABLE NYLON66 DAT00 ‘00030 | 602313155 | 9970190088 PCB LED AS. ‘CMC-1410PR_ 901 | 602313-181 | DKLG205E- LED) KLG-205E 1°5 GREEN ‘D901 | 602313-099 | 9970730010 CONN AS, ‘YMHO25 — 03 + TUBE#1007 = 255 ‘00070 | 602313-184_ | 9971716301 PACKING AS. (CMC-1410PR ‘00100 |" 602313-124 | "9978120300 CUSHION BOTTOM L_[_P.E FORM ‘00200 | 602313-125 | 9978120301 CUSHION BOTTOM R_[P.E FORM. ‘00300 |" 602813-126 | 9978120303 (CUSHION TOP L. P.E FORM, ‘00400 | 602313-127 [9978120304 CUSHION TOP PE FORM ‘00500 |" 602313-002 | "4858210600 BAG POLY, PE FILM 10.03 x 900% 900 ‘00550 | 602313-003 | 4858213800 BAG POLY PLE FILM 10.06 x 250x350 ‘on600 |“ 602313-322 |" 2Ta125506N ‘TAPE OPP. W590. ‘00700 | ~602313-006 | 9978019700 BOX CARTON DW.2 449x427 x 408 ‘00800 | 602313-179 | 9975819601 LABEL SERIAL NO ‘ART PAPER 1256. ‘00900 | 602313-156 | 2Ta00025CL ‘TAPE SCOTCH. Was) ‘1100 | 602313-316 | 9909319100 ‘STICKER YELLOW. PAPER Di3 ‘00080 | 602313-190_| 9970190093, PCB EAR AS (CMC-1410PR Eaot | 602313.175 | 9976300009 {JACK EAR PHONE HCY-352W-ST spor [602313311 | 4858302291 ‘SPEAKER, P-300R 16 OHM 1W. ‘spo2_ | 602313311 | 4858302201 ‘SPEAKER, P-300R 16 OHM 1W. S81 602313-107 | _97P6262900 ‘CONN WAFER, YMW-025-04 2.5MM. 46Loc CBM PN. (OEM-CODE PART-NAME, PART-DESC. ‘ss2n_ | 602313-100 | 9970740009 CONN AS ‘YMHO25 — 04-+ VBH — 03 + 1007 =200 $31 602313-105 | 97P6262700 ‘CONN WAFER, ‘YMW.-025-02 2.5MM- ‘S3iN__|_602313-098 | 9970720017 ‘CONN AS, ‘YMH025 — 02 + TUBE + 1007 = 500 $32 1602313-105 | 97P6262700 ‘CONN WAFER, YMW-025-02 2.5MM ‘s32n | 602313-097 |" 9970720018. ‘CONN AS: YMHO25 — 02 + TUBE + 1007 =700 001 02313-2099 [7121401011 ‘SCREW TAPPING 72S PAN 4x10 MFZN ‘00090 | 602313-001 | 9970190004 ‘ACCESSORY AS. CMC-1410PR PS. 602313-113 | 9979900020 ‘CORD POWER, LP.34(AV/LS-13 HOSVV- J 602313-111 | 9979900026: CORD AC GFC-3R LP23+LS13 6FT BLK zl 602313-112 | 9979900035. ‘CORD POWER, SANRP + 6ANRC + BLACK = 1800 o 602313-304 | 9970790017 SIGNAL CABLE AS DY 4019 x2 + 390099 — 07 = 1060 02 602313-305 | 9970790018 ‘SIGNAL CABLE AS Hi23P + HS9P + 32792 — 06 = 1060 03 602313-080 |" 9970700349 (CABLE SIGNAL AS. RCA2P + RCA2P = 1060, 06 602313-191 | 9978600045 MANUAL INSTRUCTION | 319124-01 (CMC-146PR) 7 602313-192 | 9978600118 CARD X-RAY ‘ART PAPER (1084, 1410PR) ‘ooro0 | 602313-115 | 9971013401 COVER FRONT AS (CMG-1410PR ‘ooro0 | 602513-114 | 9972012401 COVER FRONT ‘ABS IVR 0.747KG GY-117A ‘oor10 [602813-201 | 2221080945, RESIN ABS H.N ABS-750 L/BEIGE 22504 ‘oo200 | 602313-195 | uGC1101007 PAINT ABS ‘SKGM A-983-3 ‘00300 | 602813-345__| 4856213400 WASHER RUBBER TMR-CANF-O1BK ‘oo4o0 | 602813-313 [9976011500 SPECIAL SCREW 5 5x25 SWRM+ SPCC (11.2) ZN ‘00600 | 602313-139 | 9972810501 DR. ‘ABS IVR 30G GY-117A 00610 | 602813-201 | 2221080945, RESIN ABS H.N ABS-750 L/BEIGE 22504 ‘oo7o0 | 602313-176 | 9974210602 KNOB VR ABS BEG 2.56 GY-210B 0710 | 602813-290_| 2221080613 RESIN ABS H.N 700 BEG V27578 GY2108 ‘00800 | 602813-008 | 9974911202 BUTTON GREEN SW | ABS BEG 1G GY-210B 0810 | 602313-290_ | 2221080613, RESIN ABS H.N 700 BEG V27578 GY210B ‘ongo0 | 602313-182 | "4857920400 LOCK DOOR. TCB-1488MW. ‘1000 | 602313-151_| 9973718400 GUIDE PCB R ABS IVR 21G GY-117A 1010 | 602813-292 | 2221080043, RESIN ABS HFA-700 V2850 IVORY. ‘01100 | 602313-150 | 9973718500 GUIDE PCB L. ABS IVR 21G GY-117A orr10 | 602313-202 [2221080943 RESIN ABS: HFA-700 V2850 IVORY. ‘01200_|602313.297_| 7122401011 ‘SCREW TAPPING T2S PAN 4x10 MFZN ‘01300 | 602313-203 | 9972710300 FOOT, TMR-CA BLK ‘071400 | 602313-205 [9975413600 PLATE DECO "ALO.5 x 64x10 ‘01500 | 602313.294 [7121300811 ‘SCREW TAPPING 25 PLT 3x8 MFZN ‘0010 | 602313-117_| 9971412701 COVER REAR AS ‘CMC-1410PR ‘00700 | 602313-116 [9972111601 COVER REAR. ‘ABS IVR 1.1KG GY-117A, ‘oor10 | 602313-201 | 2221080945 RESIN ABS H.N ABS-750 L/BEIGE 22504 ‘00200 | 602313-298 [7121401411 ‘SCREW TAPPING T2S PAN 4x14 MFZN ‘00300 | 602313-314 [9976711300 ‘SPRING SPEAKER ‘SWRM 07.0 TORSION ‘00400 | 602313-300_| 7128301211 ‘SCREW TAPPING T2S WAS 3x12 MFZN (00500 | 602313-300_| 7128301211 ‘SCREW TAPPING T2S WAS 3x12 MFZN ‘00600 | 602313-299 [7142400811 ‘SCREW TAPPING T2S TRS 48 MFZN ‘00700 | 602313-326 [9972913100 THT. TABS IVR 15G GY-117A ‘00710 | 602313-292 | 2221080943, RESIN ABS HFA-700 V2850 IVORY. ‘00800 | 602313-203 | 9972710300 FOOT TMR-CA BLK ‘00900 | 602313-177_| 9975413501, LABEL RATING PE 0.125 x 72x 147 COM. IVR 47148Cx commodore Technical Training Friedrich-Seele-StraBe 10 3300 Braunschweig Tel.: (05 31) 89 50 63 « Fax: (05 31) 8 57 74