B.Arch. Tenth Semester (C.B.S.

)
Construction Technology & Materials-VIII

P. Pages : 2 AHK/KW/19/2526
Time : Three Hours *1047* Max. Marks : 100
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Due credit will be given to neatness and adequate dimensions.
3. Assume suitable data whenever necessary.
4. Illustrate your answers whenever necessary with the help of neat sketches.
5. Que. 8 is compulsory. Solve any five questions.

1. a) Explain how Glulam and various types of connectors have made design & construction of 10
large span structures possible by using short length timber (S.L.T).

b) Explain in detail construction of Lamella domes by using S.L.T. 8

2. Explain with neat sketches the various structural systems that can be used for high rise 18
buildings.

3. a) What are the different predominant reasons responsible for the development of defects in 10
buildings.

b) Suggest stepwise method for Jacketing in R.C.C. column. 8

4. a) Explain why Architects need to have good understanding of Admixtures & construction 8
chemicals and their utility in present day construction.

b) Describe usefulness, merits & limitations of Non-Destructive Test. 10

5. Give a brief explanatory note on Earthquake zones of India. And what are the design & 18
construction measures required to be taken in Framed building to reduce the effects of
earthquake.

6. What are pneumatic structures? Explain in brief about its usability, types & advantages & 18
disadvantages.

7. Write short notes on any three. 18

1) Catenary structures.

2) Construction Joints in buildings.

3) Bicycle wheel Roof.

4) Membrane structures.

5) Base Isolators.

AHK/KW/19/2526 1 P.T.O
8. A person has purchased an existing 10 yrs old G+1 R.C.C. Frame structure as shown in 28
Fig. the owner now wants to convert 1st floor into saloon. The existing walls are 230 thk.
brick masonary in cement mortar. The floor and roof slabs are 120 mm thick R.C.C. The
clear room height for ground floor as well as first floor is 3.50 M. The plinth level being
450 mm above G.L. The following additions and alterations are proposed to the existing
structure :-
a) Construction of a 1000 mm wide open R.C.C. stair from ground to first floor only.
b) Construction of cantilevered R.C.C. porch at ground floor level that will act as
balcony on first floor as the entrance to saloon.
Assume lintel beam over window on first floor, to be converted into entrance door for the
saloon.
Draw all necessary drawings showing plans & sections at 1:50 scale, along with necessary
description so as to fully explain the methodology of construction & necessary precautions
that need to be adopted during the construction of proposed addition. Also draw to suitable
scale details of foundation of proposed cantilevered porch & the proposed R.C.C.
staircase.

Note – All dimensions are in mm

– Existing window openings (W) are 900 mm x 1300 mm
(WI) is 1200 mm x 1300 mm
– Proposed door opening can be 900 mm x 2100 mm

**********

AHK/KW/19/2526 2
 B.Arch. Tenth Semester (C.B.S.)
Professional Practice

P. Pages : 1 AHK/KW/19/2527
Time : Three Hours *1048* Max. Marks : 70
_____________________________________________________________________
Notes : 1. Solve any five questions.
2. All questions carry equal marks.
3. Due credit will be given to neatness and adequate dimensions.
4. Illustrate your answers whenever necessary with the help of neat sketches.

1. What is the difference between the terms Trade, Business and Profession? What role
does an architect play in the society?

2. Describe the different types of office setups. Explain the duties of the principal
Architect.

3. Compare the different types of contracts. Explain in brief the different types of contracts.

4. Elaborate the role of council of Architecture in relation to Architectural profession and

education.

5. Write in detail about the Architects Act of 1972. What are its effect on professionals?

6. Short notes:
a) Land Acquisition.
b) Sale deed Procedure.
c) Articles of Agreement.
d) Professional Tax.

7. Explain the entire tendering process and highlight the characteristics features of a tender
notice.

8. Discuss the liabilities & responsibilities of the client, the architect & the contractor under
a contract.

***********

AHK/KW/19/2527 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Construction Technology & Materials – VIII
P. Pages : 1 NRT/KS/19/3762
Time : Three Hours *0591* Max. Marks : 100
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Due credit will be given to neatness and adequate dimensions.
3. Assume suitable data whenever necessary.
4. Illustrate your answers whenever necessary with the help of neat sketches.
5. Solve any five questions.
6. Question No. eight is compulsory.

1. a) Explain the Term GLULAM & SLT. What is there Relevance in Construction 9
Technology?
b) Explain with the help of neat sketches, any two structural components possible using SLT. 9

2. a) Describe cable suspended & cable supported roof with the help of examples. 9
b) Explain briefly the pneumatic structures? What are their types? 9

3. a) Enlist different types of systems for High Rise Buildings and explain any two of them. 9
b) What is Vertical Zoning Services in High Rise Building. 9
4. Enlist any 5 defects in Building and explain the stepwise method to rectify any two of 18
them.
5. a) Describe Admixtures and construction chemicals. List out various Admixtures and 9
Construction chemicals that are used for repairs.
b) What do you mean by NDT? What is the purpose? Explain briefly any two NDTs. 9

6. a) What is the philosophy of earthquake resistance? How it is appropriate to Indian context? 9

b) Enlist and briefly explain various design aspects that you will adopt and integrate in 9
Design & Construction of load Bearing Brick masonry construction.

7. Write short notes on any three. 18

a) Rehabilitation of a weakened component by Jacketing.
b) Camera vault
c) Seismic wave
d) Causes of cracks in buildings.
e) Measurement of earthquake.

8. An existing Godown admeasuring 8.690mts×18.690mts made out of 345 mm thick load 28

Bearing Brick Wall masonry has pitched (Gable end) A.C. sheets roof supported on
kingpost M.S. tubular truss.
This Godown has a plinth height of 0.6 mts and height 4.5 mts at eaves, above plinth level.
It is proposed to construct a 12.00mt × 2.5mt wide loft using suitable materials, at a height
of 2.40 mt from the internal finished floor level, along one of the long walls.
Drawing Required.
a) Two plans (one at foundation and another at loft level) scale 1 : 25.
b) Two sections to explain the entire scheme.
*********

NRT/KS/19/3762 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Professional Practice

P. Pages : 1 NRT/KS/19/3763
Time : Three Hours *0592* Max. Marks : 70
_____________________________________________________________________
Notes : 1. Due credit will be given to neatness and adequate dimensions.
2. Illustrate your answers whenever necessary with the help of neat sketches.
3. Solve any five questions
4. All questions carry equal marks.

1. Write in detail about the different types of competitions, their classification & their
procedure.

2. What is the 'Architects Act 1972'. Explain in brief about the various acts such as land
acquisition Act, Urban Land Ceiling Act.

3. Write Short Notes –

a) Tender Notice

b) Copyright

c) Architects Tax Liabilities

d) Professional Tax

4. What are the various types of contracts and components of contract documents? Explain
in brief.

5. Explain in general the sale deed procedure & highlight the following.

a) Parties

b) Considerations

c) Documents

d) Description

e) Stamp duty

6. What are different types of tenders? Explain in detail the tendering process.

7. What is the difference between trade, profession and business. Also write about ethical
ways of getting commission & professional code of conduct.

8. What are the different types of companies / firms? What are their advantages and
disadvantages?
**********

NRT/KS/19/3763 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Construction Technology & Materials – VIII
P. Pages : 1 NIR/KW/18/3762
Time : Three Hours *1166* Max. Marks : 100
_____________________________________________________________________
Notes : 1. Question No. Eight is compulsory.
2. Due credit will be given to neatness and adequate dimensions.
3. Assume suitable data wherever necessary.
4. Retain the construction lines.
5. Illustrate your answers wherever necessary with the help of neat sketches.
6. Answer in all five questions.
1. a) Explain what is glulam? How large span structure are possible out of short length timber by 9
using glulam?
b) By using Glulam and connector technique explain the design of solid beams and web 9
Beams.

2. a) Enlist different types of tensile Roof structures and explain any one of them in detail. 9
b) Describe structural characteristics of tensile Roof structure and state its merits & demerits. 9

3. a) Enlist different types of systems for High rise Building and explain any two of them. 9
b) Explain the Need and importance of High rise building? 9

4. Enlist any 5 defects in Building and explain the stepwise method to rectify any two of them. 18

5. a) Describe admixtures and construction chemicals, list out various admixtures and 9
construction chemicals that are used in buildings mentioning their use.
b) What is non destructive test? List out its various types and explain any one of them. 9

6. a) Explain the usefulness of earthquake zone maps to Architects. 9

b) With reasons describe the various design aspects that ion will adopt and integrate in design 9
and construction of load Bearing Brick masonry construction.

7. Write short notes on any four. 18

i) Jacketing for strengthening of weak component.
ii) Penetration test.
iii) Causes for excessive rusting of reinforcement.
iv) Measurement of earthquake intensity.
v) Seismic waves.

8. An existing Godown admeasuring 10.5mts x 18.5 mts made out of 345mm thick load 28
bearing Brick wall has pitched (Gable end) A.C. sheets roof supported on kingpost M.S.
tubular truss.
This Godown has a plinth height of 0.6 mts and height 4.5 mts at eaves, above plinth level.
It is proposed to construct of 5.5m by 2.5 mts wide loft using suitable materials, at a height
of 2.4 mts from the internal finished floor level, along one of the long walls.
Drawing required
a) Two plans (one at ground floor level and another at loft level) scale 1:25.
b) Two sections to explain the entire scheme.
Note : Existing walls/foundations not to be disturbed.
***********

NIR/KW/18/3762 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Professional Practice

P. Pages : 1 NIR/KW/18/3763
Time : Three Hours *1167* Max. Marks : 70
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Answer any five questions.
3. All questions carry equal marks.

1. Explain in detail difference between Trade, Business and profession. Explain why
Architecture is considered as profession.

2. What are the salient features of professional code of conduct as stipulated by council of
Architecture.

3. What is a contract? Write in detail about various conditions of contract as published by

IIA.

4. Describe the ideal office setup of an Architectural firm with respect to organization and
Administrative systems and procedures.

5. Write in brief about types of tenders, and procedure for opening and selection of tender.

6. Why are building bye-laws necessary? Highlight the importance of building bye laws
keeping in view both the individual and society.

7. Write short notes on any two.

a) Responsibilities and liabilities of Architect towards client.

b) Urban land ceiling Act.

c) Architectural competitions.

d) Professional partnership.

***********

NIR/KW/18/3763 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Professional Practice
P. Pages : 1 NJR/KS/18/4820
Time : Three Hours *0328* Max. Marks : 70
_____________________________________________________________________
Notes : 1. Due credit will be given to neatness and adequate dimensions.
2. Assume suitable data whenever necessary.
3. Illustrate your answers whenever necessary with the help of neat sketches.
4. Solve any five questions.
5. All questions carry equal marks.

1. Explain the terms Trade, Business and profession. Why Architecture is considered as
profession? What is the importance of copyright for Architects.

2. Write an exhaustive note on the Responsibilities and Liabilities of Architects in projects.

3. What are the different types of companies/Firms? What are their advantages and
disadvantages.

4. Write in brief about.

i) Types of contract.
ii) Essentials of valid contract.
iii) Discharge of contract.

5. What are the various types of contracts and components of contract documents? Explain
in brief.

6. Explain in general the sale deed procedure and highlight the following.
i) Parties
ii) Consideration.
iii) Documents.
iv) Description.
v) Stamp duty.

7. Write short notes on.

a) Opening and acceptance of tender.
b) Articles of Agreement.
c) Copyright.
d) Urban land ceiling Act.
e) Architect's Tax liabilities.

8. Elaborate on the role of council of Architecture in relation to Architectural profession and

education.

************

NJR/KS/18/4820 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Construction Technology & Materials – VIII

P. Pages : 2 NJR/KS/18/4819
Time : Three Hours *0327* Max. Marks : 100
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Due credit will be given to neatness and adequate dimensions.
3. Assume suitable data whenever necessary.
4. Illustrate your answers whenever necessary with the help of neat sketches.
5. Use of non programmable calculator is permitted.
6. Question number eight is compulsory.
7. Answer total five questions.

1. a) Explain the terms GLULAM & SLT. What is there relevance in construction technology? 9

b) Describe with sketch, cable stayed structures. Enumerate their advantages & limitations. 9

2. Explain briefly the pneumatic structures? What are their types? Write in brief about their 18
suitability as building enclosure.

3. a) Enlist and explain briefly various types of foundations used for high rise buildings. 9

b) Explain the terms Grouting and Guniting. What is its application in building construction? 9

4. a) What is meant by concrete admixture? Enlist and explain the utility of any five 9
admixtures.

b) Explain Epicentre, Focus, Earth quake waves & magnitude. 9

5. a) What is soft storey effect and pounding effect? How to prevent damage due to these effects? 9

b) What do you mean by NDT? What is the purpose? Explain briefly any two NDTs. 9

6. a) What is the philosophy of earthquake resistance? How is it appropriate to Indian context? 9

b) Enlist and briefly explain various additions and alterations carried out in buildings. 9
Mentioning their purpose.

7. Write short notes on any three. 18

a) Lamella vault.

b) Shear walls.

c) Bicycle wheel Roof.

d) Causes of cracks in buildings.

e) PTFE & ETFE.

NJR/KS/18/4819 1 P.T.O
8. An existing residential building having out-out dimensions as 10M x 10M is required to
be provided with
i) R.C.C. Staircase for reaching the terrace
ii) R.C.C canopy of size 4x6m in front.
The present structure is of 1½ Brick thick load bearing walls supported by brick
foundation and has a R.C.C roof slab resting on load bearing walls. Draw.

i) Ground Floor plan – 1:50 8

ii) Roof plan – 1:50 8

iii) Sections passing – 1:50 through stair and canopy. 12

Note: a) Both the additions (stair & canopy) are to be independent of existing structure.
No support to be derived from the existing walls/ slab & existing foundation not
to be tampered with.
b) Assume suitable data.

***********

NJR/KS/18/4819 2
 B.Arch. Tenth Semester (C.B.S.)
Professional Practice

P. Pages : 1 NRJ/KW/17/4820
Time : Three Hours *0317* Max. Marks : 70
_____________________________________________________________________
Notes : 1. Due credit will be given to neatness and adequate dimensions.
2. Assume suitable data whenever necessary.
3. Illustrate your answers whenever necessary with the help of neat sketches.
4. Solve any five questions.
5. All questions carry equal marks.

1. Explain various requirements & conditions for conducting Architectural competition.

2. Explain various types of Architectural competitions with examples.

3. As an architect you have a duty towards society. Explain.

What are the rules of conduct to be followed with your client.

4. What is the need of a Tender for construction of a building. What does tender document
comprises of?

5. Explain any four.

i) Tender for demolition

ii) Architect

iii) Lump-sum tender

iv) Open architectural competition

v) contract document.

vi) Architects Act 1972

vii) Bar on escalation

6. Explain the term item rate contract. What are its advantages or disadvantages over Lump-
sum contract. Give an example to explain.

7. Explain your concept of "Architects office"

8. What do you understand by 'Architectural copyright'?

*******

NRJ/KW/17/4820 1 P.T.O
 B.Arch. Tenth Semester (C.B.S.)
Construction Technology & Materials - VIII
P. Pages : 1 NRJ/KW/17/4819
Time : Three Hours *0316* Max. Marks : 100
_____________________________________________________________________
Notes : 1. All questions carry marks as indicated.
2. Due credit will be given to neatness and adequate dimensions.
3. Assume suitable data whenever necessary.
4. Illustrate your answers whenever necessary with the help of neat sketches.
5. Solve any five questions.

1. Write in brief about the environment friendly techniques for use of timber to cover large
spaces. Enlist and draw sketches of roofing systems/ components for constructing long
space structures using timber.

2. Explain with sketches "pneumatic structures" and their basic types. Mention there
advantages and short comings.

3. What is a High rive building? Explain in brief the factors governing the design of High
Rive buildings.

4. Enlist and explain in short the reasons for development of cracks in buildings. Write down
ten preventive measures for overcoming the problem.

5. What is concrete Admixture? Enlist and explain in brief the purpose of different
admixtures used in concrete.

6. Explain in brief the philosophy of Earth quake Resistant Design of buildings. How Earth
quake zone was becomes helpful in design of Earthquake Resistant Design?

7. Why and What kind of additions and alterations are carried out to existing structures?
What are the precautionary measures required to be taken while carrying out any
modifications to existing structures?

8. Write short notes on any four .

i) Cable structures.
ii) Schimdt Hammer test.
iii) Soft storey Effect.
iv) Pressure Grouting.
v) Shear wall / Truss.
vi) Service floor.
vii) Lamella vault.

************

NRJ/KW/17/4819 1 P.T.O