QCOM SMART TOOL MODULE SERVICING SOFTWARE
CODE BY IMEI SUPPORTED MODELS:
HUAWEI MODEMS (ALL THAT ARE SUPPORTED BY CABLE AND ARE LISTED BELLOW ASWELL)
AMOI BERLIN
AMOI NEW YORK
(PROBABLY OTHER UNKNOWN AMOI AND HUAWEI MODELS ASWELL)
HUAWEI SUPPORTED MODELS:
MODEMS:
E1552
E156
E156C
E156g
E159
E159g
E169G
E170
E172
E176
E180
E182E
E196
E270
E271
E272
E510
E612
E618
E620
E630
E630+
E660
E660A
E800
E870
E880
EG162
EG162G
EG602
EG602G
VODAFONE SUPPORTED MODELS:
MODEMS:
K2540
K3515
K3520
K3565
K3715
AMOI SUPPORTED MODELS:
MODEMS:
U2000+ (MODEM)
PHONES:
SkypePhone 1 (WP-S1)
SkypePhone 2 (WP-S2)
SkypePhone 3 (INQ)
MOMODESIGN MD-1
BERLIN
NEW YORK
MODELABS LEVI’S THE ORIGINAL 3G
MD300h (INTERNAL)
A500
NOTE: IF COUNTER IS BLOCKED ENTER *1001# AND SELECT OFF;
ZTE SUPPORTED MODELS:
MOMODESIGN MD-2 (F232)
MOMODESIGN MD-3
F152 (INTERNAL)
F156
F165
F188
F230
F233
F256
F866
T6
LG FOMA SUPPORTED MODELS:
L Series:
L600i, L601i, L602i, L704i, L705i, L705iX, L706i, L852i, L01A, L02A, L03A
LG SUPPORTED MODELS:
CU Series:
CU515, CU575, CU720, CU915, CU920
CB Series:
CB630 Invision (Go ‚Settings/Connection/USB Connection Mode’ and set it as ‚Data Service’
HB Series:
HB620
KB Series:
KB620, KB770
KC Series:
KC910, KC910Q, KC910Qa, KC910QAT
KE Series:
KE990
KF Series:
KF310, KF311, KF390, KF700, KF690
KT Series (Symbian OS):
KT610, KT615 (Go ‚Connectivity’ and set it as ‚Internet Services’)
KU Series:
KU250, KU380, KU385, KU970, KU990, KU990GO, KU990MF, KU990R, KU990i, KU990iGO
MU Series:
MU515
TU Series:
TU515, TU575, TU720, TU915
U Series:
U250, U300, U310, U370, U450, U880, U890, U900, U960, U970, U990
NOTE: All mentioned models are legally owned by us and were used for developement and testing
of our solution.
GETTING STARTED
1. INSTALL DRIVERS CONTAINED BY ‚LGUSBModemDriver_WHQL_ML_Ver_4.[Link]’
2. BE SURE THAT ON ‚PHONE SETTINGS’ AT ‚CONNECTIVITY’ , ‚USB CONNECTION MODE’
IS SET AS ‚DATA SERVICE’
3. CONNECT PHONE TO ORIGINAL USB CABLE
4. ONCE YOU START SOFTWARE PRESS ‚SCAN PORTS’ FOR PHONE DETECTION
SUPPORTED FEATURES
1. SECURITY RESTORE (RESTORE SIMLOCK AND IDENTIFICATION AREA IN CASE PHONE
GOT DAMAGED SOMEHOW WHILE OPERATING OUR SW OR IN CASE CUSTOMER
CHANGED MIND ABOUT UNLCOKING IT FOR EXAMPLE)
2. RAM READ (YOU WILL NEVER NEED UNLESS WE ASK IT)
3. NAND READ (YOU WILL NEVER NEED UNLESS WE ASK IT)
4. OTP-IMEI-BTAD REPAIR (REPAIRS FAULTS SUCH AS ‚UNAVAILABLE OTP BLOCK’,
AND/OR HELPS YOU REPAIR IMEI AND BLUETOOTH ADDRESS ON PHONES. PLEASE
NOTE THAT SOME MODELS LIKE U250, U960 DEPENDING HW RELEASE MIGHT NOT
ALLOW IMEI/BLUETOOTH OPERATIONS)
5. UNLOCK (SAFELY REMOVE OPERATOR RESTRICTIONS FROM PHONE)
6. DUMP ME (WHEN YOU GET UNSUPPORTED VERSION USE THIS FEATURE TO DUMP
PHONE AND SEND US THE RAM_DUMP.bin FILE CREATED)
SPECIAL NOTES FOR U300, U310, U450, U880, U890, U900 MODELS
1. NOT ALL FIRMWARES SEE ALL KINDS OF SIMS. TO KNOW WHICH SUPPORT WHAT CHECK
WITH US
2. REFLASHING PHONE WILL RELOCK IT. ISN'T OUR FAULT BUT THAT HAPPEN EVEN IF YOU
UNLOCK BY CODE
3. WHEN DURING UNLOCK PROCESS SW DISPLAY THE MESSAGE BOX PLEASE READ WHAT IT
SAY AND DO IT FAST ELSE
PROCESS COULD FAIL SOME CASES
SPECIAL NOTES FOR KU990i, KU990iGO MODELS
1. YOU MUST CONNECT PHONE POWERED ON WITHOUT A SIM INSIDE !
2. IN CASE YOU GET ‚UNSUPPORTED FIRMWARE’ MESSAGE THEN PLEASE SELECT AT
‚Operation’ IN [Link], ‚DUMP ME’ AND AFTER DUMP COMPLETED PLEASE UPLOAD IT ON
RAPIDSHARE AND MAIL LINK ON HACK3R2K@[Link] OR SEND IT BY PM TO
‚HACK3R2K’ ON FORUM. ALSO DONT WORRY ! THSI TIME ‚DUMP ME’ TAKES MAX 6 MINUTES !
