Scribd
Upload
530 views2 pages

SOK Clinker OPC

This document provides information on a clinker sample including its chemical composition, mineralogic composition, and usage qualities. The clinker was produced on April 14, 2011 in a simple process with a maximum temperature of 1455 degrees Celsius and 27.12% liquid phase. Its chemical composition includes 21.46% SiO2, 5.13% Al2O3, 3.77% Fe2O3, and 66.36% CaO. Its mineralogic composition is estimated to be 70.89% alite, 7.41% belite LT, 11.69% ferrite, and 0.54% SO3. Test results for compressive strength at 1 and 28 days are not available.

Uploaded by

Amr A. Nader
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
530 views2 pages

SOK Clinker OPC

This document provides information on a clinker sample including its chemical composition, mineralogic composition, and usage qualities. The clinker was produced on April 14, 2011 in a simple process with a maximum temperature of 1455 degrees Celsius and 27.12% liquid phase. Its chemical composition includes 21.46% SiO2, 5.13% Al2O3, 3.77% Fe2O3, and 66.36% CaO. Its mineralogic composition is estimated to be 70.89% alite, 7.41% belite LT, 11.69% ferrite, and 0.54% SO3. Test results for compressive strength at 1 and 28 days are not available.

Uploaded by

Amr A. Nader
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CRP 2011.

04 - Clinker Module Page 1 of 2

Clinker Module (0/0) --

Method: (*) Simple Clinker

Clinker
Local code: SOK Trial - OPC

Sampling date: 110414

Comment:

Input
OPC Process
Blaine specific surface area target: cm2/g SO3 Target: %

Process
T° Max: °C Phase Liquide @ T° max: 27.55 %

Wet chemistry
CaO free: 1 %

XRF
SiO2: (*) 21.46 % Al2O3: (*) 5.13 %
Fe2O3: (*) 3.77 % CaO: (*) 66.36 %
MgO: (*) 1.89 % Na2O: (*) 0.33 %
K2O: (*) 0.41 % SO3: (*) 0.54 %
P2O5: % TiO2: %
Mn2O3: %

Usage qualities

Process

Usage quality Value


Heat Cooling (MJ/T) -1729
Total Heat (MJ/T) 1773
Temp. max cuisson (°C) 1455
Pourc. Phase liquide (%) 27.12
LSF 96.746
MS 2.411
AF 1.361
SO3/alk 0.697

Potential mineralogic composition

Usage quality Value


Alite (%) 70.89
Belite HT (%) 1.92
Belite LT (%) 7.41
Lime HT (%) 0.07
Lime LT (%) 0.93
Periclase HT (%) 0
Periclase LT (%) 0.79
Aluminate cubic (%) 2.74
Aluminate orthorhombic (%) 2.56
Ferrite (%) 11.69
Arcanite (%) 0
Thenardite (%) 0.45
Aphtitalite (%) 0.55
Langbeinite (%) 0
Anhydrite (%) 0
Na2O soluble (%) 0.27
K2O soluble (%) 0.21
SO3 (%) 0.54

Fresh state

http://thermoclink-test.lafarge.com/clinker/clinker.do 4/14/2011
CRP 2011.04 - Clinker Module Page 2 of 2

Usage quality Value


Setting time (hours) N/A

OPC Usage Quality

Usage quality Value


RC 1 Day (MPa) N/A
Rc 28 days (MPa) N/A

http://thermoclink-test.lafarge.com/clinker/clinker.do 4/14/2011

You might also like